RF Hardware Assembly and Rework Technician Apple IncRF Hardware Assembly and Rework TechnicianSunnyvale, CAThe RF Hardware Rework and Assembly Technician will support the hardware design team in wireless PCB assembly and component rework, as well as support maintenance of lab facilities and lab operations. The RF Hardware team designs, develops, and optimizes radio frequency (RF) board and module designs for wireless silicon/platform development and wireless-enabled Apple products.
NewElectronics Technician (RF) Alicia CoronaElectronics Technician (RF)Newark, California$55,000–$65,000We are seeking an experienced Electronics Technician (RF) to perform RF testing, tuning, troubleshooting, and acceptance testing of high-power electronic systems. Experience with RF/microwave systems and RF test equipment (spectrum analyzers, VNAs, oscilloscopes, signal generators, etc.).
Test Technician(Electrical, RF, and Digital) ICONMA, LLCTest Technician(Electrical, RF, and Digital)Santa Clara, CA$26.90–$29.90 / hourResponsibilities: This role involves building and maintaining test racks, creating test setups, and supporting various testing processes for our products. Build Test Racks and Setups: Assemble, and maintain test racks and test setups for electrical testing (RF, digital, and antenna).
RF Test Technician Teledyne TechnologiesRF Test TechnicianMountain View, CaliforniaThese markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position.
RF Test Engineering Program Manager Apple IncRF Test Engineering Program ManagerCupertino, CAAs an Engineering Program Manager supporting the Wireless Systems & Compliance Engineering team, you will apply your Program / Project management skills and have significant responsibility for driving multiple RF test-related projects that are essential to timely, successful release of Apple products. To ensure RF compliance, testing is performed with a range of niche RF test equipment and setups, including conducted RF test stations, anechoic and semi-anechoic chambers, as well as custom crafted setups in indoor and outdoor environments.
RF Test Supervisor Alicia CoronaRF Test SupervisorFremont, California$90,000–$100,000We are seeking a highly motivated RF Test Supervisor to lead and oversee testing operations for advanced RF and microwave systems, including Traveling Wave Tube Amplifiers (TWTAs). This is an excellent opportunity for a hands-on leader with strong technical expertise to make an impact in a fast-paced manufacturing environment.
Test Technician(Electrical, RF, and Digital) IconmaTest Technician(Electrical, RF, and Digital)Santa Clara, CA$26.90–$29.90 / hourResponsibilities:This role involves building and maintaining test racks, creating test setups, and supporting various testing processes for our products. Build Test Racks and Setups: Assemble, and maintain test racks and test setups for electrical testing (RF, digital, and antenna).
Test Technician (Electrical, RF, and Digital) IconmaTest Technician (Electrical, RF, and Digital)Santa Clara, CA$27.61–$29.90 / hourResponsibilities:Build Test Racks and Setups: Assemble, and maintain test racks and test setups for electrical testing (RF, digital, and antenna). Proficient in using oscilloscopes, spectrum analyzers, signal generators, network analyzers, and other common test equipment.
Test Technician RF - Klystron Engineering Technician CPI International Holding Corp. (Microwave Power Products Division)Test Technician RF - Klystron Engineering TechnicianPalo Alto, CA$24–$29 / hourFor security clearance position, the candidate must be a US citizen with the ability to obtain a U.S. Department of Defense (DoD) Security Clearance as required, holding a security clearance is a plus. This role is ideal for hands-on technicians who enjoy troubleshooting, working with specialized RF equipment, and solving complex technical problems in a production environment.
Product Planning Engineer– DSP / RF Advanced Micro Devices, IncProduct Planning Engineer– DSP / RFSan Jose, CaliforniaThe role drives the definition and alignment of product capabilities across signal processing, RF conversion, and associated compute integration, including AI/ML, by developing product and IP requirements. The ideal candidate demonstrates strong technical depth in DSP, RF, AI/ML, and/or mixed-signal systems, with the ability to translate system-level requirements into structured product and IP definitions.
RF Integration Engineer (6202) itD TechRF Integration Engineer (6202)San Jose, CaliforniaOperate and troubleshoot RF test and measurement equipment, including network analyzers, spectrum analyzers, vector signal analyzers/generators, power meters, traffic generators, and wireless sniffers. Collaborate with Hardware Engineering, Software Engineering, Product Management, Supply Chain, and Compliance teams to support product development and validation efforts.
RF Test Engineer, Wireless & EMC Tesla IncRF Test Engineer, Wireless & EMCFremont, CA$96,000–$222,000 / yearWe are seeking an experienced RF / Radio Test Engineer to lead the testing and validation of wireless products across multiple radio technologies including WiFi, LTE, BLE, and UHF radio. The ideal candidate will have hands-on experience with radio conformance and regulatory testing across multiple regions/countries, a solid understanding of global regulatory requirements, and working knowledge of EMC testing.
LMR Radio Engineer Tesla IncLMR Radio EngineerFremont, CA$124,000–$186,000 / yearYou will work on a broad set of efforts including the design and implementation of systems in new sites, ensuring survivability and resiliency is exceptional, driving the feature set forward, and researching the latest in LMR communications. Our radio systems are life safety critical and your work will focus heavily on ensuring our current and future states produce a highly trusted tool for our Security, EHS, and Production teams.
Internship, Radio Frequency Engineer, Energy Engineering (Fall 2026) Tesla IncInternship, Radio Frequency Engineer, Energy Engineering (Fall 2026)Palo Alto, CA$20–$50 / hourThis skilled and motivated individual will keep pushing this evolving industry forward by designing wireless/wired communication systems, circuits to ensure user safety, energy metering, thermal controls, relay controls for grid connection, and much more. The Energy Low Voltage Electrical Engineering and RF team designs the eyes, ears, and brains of Tesla's Vehicle & Optimus charging and residential/industrial energy storage products.
NewProduct Planning Engineer- DSP / RF Advanced Micro Devices IncProduct Planning Engineer- DSP / RFSan Jose, CAThe role drives the definition and alignment of product capabilities across signal processing, RF conversion, and associated compute integration, including AI/ML, by developing product and IP requirements. The ideal candidate demonstrates strong technical depth in DSP, RF, AI/ML, and/or mixed-signal systems, with the ability to translate system-level requirements into structured product and IP definitions.
Sr. Wireless RF Design Engineer Tesla IncSr. Wireless RF Design EngineerPalo Alto, CA$100,000–$228,000 / yearThe Energy Electrical Engineering team designs the eyes, ears, and brains of Tesla's Vehicle & Optimus charging and residential/industrial energy storage products. Along with competitive pay, as a full-time Tesla employee, you are eligible for the following benefits at day 1 of hire: Medical plans > plan options with $0 payroll deduction.
RF Engineer - Part Time Planet Labs PBCRF Engineer - Part TimeSan Francisco, CARemoteWe are seeking a recent graduate or currently enrolled engineering student for a part time RF and Communications Engineer position to assist in the development of our next-generation onboard links, ground radios and antenna systems that push the frontiers of satellite communications. TEAR/ITAR Requirements: This position requires access to export-controlled information, and as such, employment (or hiring of a contractor) is contingent upon the candidate's ability to access all applicable export-controlled information without additional export licensing being required by the Bureau of Industry and Security and/or the Directorate of Defense Trade Controls.
NewStaff RF Engineer LytenStaff RF EngineerFremont, CA$155,200–$232,800 / yearWe will ask you about all of these in your interviewRequired Qualifications:* Doctorate degree in a relevant field (e.g., business, engineering, sciences) AND 3+ years of experience in a relevant field leading or making significant contributions to multidisciplinary projects where scope requires reliance on the technical experience of other team members OR Master's degree in a relevant field (e.g., business, engineering, sciences) AND 5+ years of experience in a relevant field leading or making significant contributions to multidisciplinary projects where scope requires reliance on the technical experience of other team members OR Bachelor's degree in a relevant field (e.g., business, engineering, sciences) AND 7+ years of experience in a relevant field leading or making significant contributions to multidisciplinary projects where scope requires reliance on the technical experience of other team members* Have 1+ years' experience building numerical models for solving electromagnetic problems using commercial tools such as COMSOL or HFSS* Have a record of creative application of electromagnetics or physics knowledge and numerical methods to solve complex problems in electromagnetic field applications.* Write scientific programs in at least one high-level language (such as C, C++, or JAVA), in addition to MATLAB and/or PYTHON* Ability to explain complex technical concepts through verbal and written communications to internal and external customers* Ability to obtain and maintain a DOD Secret ClearancePreferred Qualifications:* Professional experience in RCS, LO technology, RF, Computational Electromagnetics (CEM) simulations, or electromagnetics* Experience in modeling multi-physics problems, for example using HFSS, Matlab, VBROP, Xpatch, etc.* Experience in the research, design, computational electromagnetic modeling, fabrication, and testing of advanced electromagnetic metamaterials* Familiarity with tailoring EM fields to control reflection, transmission, and absorption by way of patterning surfaces and designing their effective material properties.*
Senior RF Test & PCB Design Engineer ProtingentSenior RF Test & PCB Design EngineerSan Jose, CA$75–$80 / hourAbout Protingent: Protingent is an Award-Winning provider of top-tier Engineering and IT talent, trusted by companies at the forefront of innovation — from Software and Aerospace to AI, Clean Tech, Medical Devices, and Connected Technologies. RF Characterization: Utilize lab equipment (VNAs, Spectrum Analyzers, Signal Generators) to perform various RF measurements and verify simulation-to-measurement correlations.
NewRF Engineer Macpower Digital Assets Edge Private LimitedRF EngineerCupertino, CA$64–$68 / hourFAA Part 107 certification (or willingness to obtain it post-selection) is required for operating drones commercially. Must possess a FAA Small UAS Rule (Part 107) certification (for commercial drone operation) or be willing to obtain it after selection.
RF Test New Product Technology Project Manager Apple IncRF Test New Product Technology Project ManagerCupertino, CAApples Hardware Engineering Program Management Team is looking for a resourceful Engineering New Product Technology Project Manager (NPT PM) to support the Wireless Systems & Compliance Engineering team in enabling RF compliance and performance testing for Apples groundbreaking products. Be at the center of the action on a broad range of wireless test programs, partnering directly with RF test engineers, regulatory engineering, and lab operations to ensure that test setups, products, and materials are ready to support certification, conformance, and performance characterization milestones.
Senior Radio Frequency Engineer - Antenna Design EPAM Systems IncSenior Radio Frequency Engineer - Antenna DesignCupertino, CAYoull execute sophisticated RF characterizations, new antenna designs, automate test systems, and perform electromagnetic simulations to ensure optimal wireless performance in next-generation devices. As a Senior Radio Frequency Engineer specializing in Antenna Design, youll be working onsite with our prestigious Silicon Valley client.
Staff RF Coexistence Engineer (Coex) General Motors CoStaff RF Coexistence Engineer (Coex)Sunnyvale, CA$134,700–$207,600 / yearThis is a senior individual contributor role that plays a critical part in GM's in‑house design (IHD) strategy, embedding coexistence expertise early in design, validation, and integration cycles while working within agile, cross‑functional development teams. General Motors is transforming into a software‑defined, technology‑driven automotive company, with a growing emphasis on in‑house hardware and RF system design to enable faster innovation, deeper system integration, and improved product quality.
Wireless RF OTA Cellular Validation Engineer Apple IncWireless RF OTA Cellular Validation EngineerCupertino, CAWorking hands-on at the intersection of hardware, software, and regulatory compliance, you will translate carrier and industry requirements into test cases, execute OTA validation plans, support certification testing at third-party labs, and debug wireless performance issues alongside antenna, RF hardware, Chipset design, Product design, Field, and software engineering teams - building deep expertise across wireless technologies and RF systems alongside some of the best engineers in the industry. Apple's Wireless System Engineering team is looking for an engineer to work on radiated system characterization/algorithm validation across different cellular technologies for Apple's wireless products and collaborate with cross-functional teams.
Senior RF Test Engineer Tarana Wireless IncSenior RF Test EngineerMilpitas, CA$120,000–$155,000 / yearOur RF Team is seeking a talented, experienced, and highly motivated individual to support the development of RF Transceiver boards and Antennas for Tarana's next-generation wireless access products operating in the 3-7 GHz frequency bands. Our groundbreaking Fixed Wireless Access technology is delivering fiber-class internet speeds worldwide, bridging the digital divide in ways previously thought impossible.
Wireless RF OTA Connectivity Validation Engineer Apple IncWireless RF OTA Connectivity Validation EngineerCupertino, CAWorking hands-on at the intersection of hardware, software, and regulatory compliance, you will translate carrier and industry requirements into test cases, execute OTA validation plans, support certification testing at third-party labs, and debug wireless performance issues alongside antenna, RF hardware, product design, and software engineering teams - building deep expertise across wireless technologies and RF systems alongside some of the best engineers in the industry. Apple's Wireless System and Compliance Engineering team is looking for an engineer to work on radiated system characterization and performance analysis across different connectivity technologies (WLAN, BT, UWB, GNSS) for Apple's wireless products.
Wireless RF Compliance Validation Engineer (RSE) Apple IncWireless RF Compliance Validation Engineer (RSE)Santa Clara, CAApple's Wireless Systems and Compliance Engineering team is looking for an RF Compliance Validation Engineer to perform RF regulatory characterization and demonstrate regulatory compliance for new Apple products with advanced radio technologies. You will perform debugging of marginal/failure tests and will interact with multi-functional teams like RFHW/Antenna/Product Design/EE to drive design changes and address issues.
RF Test Engineer Array LabsRF Test EngineerRedwood City, CaliforniaYour work will include designing test fixtures and harnesses, creating FPGA- and software-driven test interfaces, developing board- and system-level test plans, and executing environmental and functional testing across a range of operating conditions. ITAR Requirements: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Senior RF PCB Layout Engineer Array LabsSenior RF PCB Layout EngineerRedwood City, CaliforniaYour work will include component placement, controlled-impedance routing, stack-up definition, grounding and shielding strategy, connector and launch design, and isolation of sensitive RF and mixed-signal domains. Experience supporting lab bring-up and RF characterization alongside design and test engineers (e.g., helping troubleshoot issues seen on VNAs, spectrum analyzers, and in system testing).
Lead RF PCB Layout Engineer Array LabsLead RF PCB Layout EngineerRedwood City, CaliforniaIn forging an affordable, accessible, accurate representation of Earth, our work has the potential to transform the face of dozens of fields, including autonomy, telecommunications, disaster relief, gaming, climate science, defense and construction. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Staff RF Engineer SoloPoint Solutions, Inc.Staff RF EngineerFremont, CAApply skills and experience with semiconductor manufacturing and equipment to technical and quality problems encountered in product life cycle with special attention to new product introduction. Apply experience with industrial Quality Systems, Engineering Design & Documentation, Product Qualification, Change (EC) Processes, and Problem Solving to product and component life cycles.
NewRF Test Engineer Yantran LLCRF Test EngineerFremont, CAExperience: 5 7 years in RF testing, cellular modem validation, 5G NR validation, wireless device testing, or telecom productization testing. Education: Bachelor s degree in Electronics, Electrical Engineering, Telecommunications, Computer Engineering, or a related technical field.
Radio Frequency Hardware Engineer, Google Pixel Google LLCRadio Frequency Hardware Engineer, Google PixelMountain View, CAhomehomeHomeHomework_outlinework_outlineJobsJobsnoogler_hatnoogler_hatStudentsStudentsgooglegoogleHow we workHow we workhandymanhandymanHow we hireHow we hireperson_outlineperson_outlineYour careerYour careerhelp_outlineHelp linkfeedbackSend feedbackmore_vert HelpSend FeedbackSign inCareersCareershomeHomework_outlineJobsexpand_morenoogler_hatStudentsexpand_moregoogleHow we workexpand_morehandymanHow we hireexpand_moreperson_outlineYour careerexpand_morejob detailsarrow_backBack to jobs searchJobs search results3902 jobs matched. Radio Frequency Hardware Engineer Google Pixelshare linkCopy linkemailEmail a friendcorporate_fareGoogleplaceMountain View CA USAbar_chartMidMidExperience driving progress solving problems and mentoring more junior team members deeper expertise and applied knowledge within relevant area.
RF Engineer 5 Lam Research CorpRF Engineer 5Fremont, CA$141,000–$307,000 / yearThe impact you'll make As a RF Engineer at Lam, you play a crucial role in designing, building, and troubleshooting cutting-edge radio frequency (RF) solutions for power delivery and plasma generation in our Etch and Deposition products. ## What you'll do The RF Electrical Engineer designs, develops, modifies, and evaluates electronic parts, components, or integrated circuitry for electronic equipment, as well as other hardware systems and/or electrical engineering applications.
Laboratory Service Engineer 3 - RF Systems Lam Research CorpLaboratory Service Engineer 3 - RF SystemsFremont, CA$56,100–$123,000 / yearThis role goes beyond routine lab support-you will work hands‑on with high‑power RF subsystems, vacuum hardware, and prototype semiconductor equipment, directly contributing to concept, feasibility, and next‑generation product development. Partner closely with cross‑functional teams-including hardware engineering, process development, manufacturing, QA, firmware, and software-to support R&D activities, customer demos, NPI builds, and release milestones.
RF Test Engineer Senior - Staff Zipline International IncRF Test Engineer Senior - StaffSouth San Francisco, CAOur customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The Avionics team is a group of hardware, software, and test experts responsible for designing robust systems that control our life-saving drone delivery service in some of the toughest environments on Earth.
Sr Principal/ Principal RF Engineer (San Jose, CA, US) Skyworks Solutions, IncSr Principal/ Principal RF Engineer (San Jose, CA, US)San Jose, CA$143,000–$286,400 / yearThis position is ideal for a hands-on expert with a passion for innovation, a strong production track record in wireless systems such as Bluetooth and Wi-Fi, and a desire to make a lasting impact on cutting-edge semiconductor solutions. At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management, and the freedom to make meaningful contributions in a setting that encourages creative thinking.
Sr RF Filter Design Engineer Qorvo IncSr RF Filter Design EngineerSan Jose, CA$115,600–$150,500 / yearYou will design microwave acoustic devices using a variety of design techniques, including conventional bandpass filters, ladder filters, notch filters, CRF filters, acoustic-assisted filters, etc. Our highly collaborative and fast-paced work culture empowers engineers to develop innovative design solutions with cutting edge technologies and achieve best inclass module performance through highly sophisticated co-design and integration technique.
Staff RF Microwave Engineer ReachStaff RF Microwave EngineerRedwood City, CaliforniaBorn out of MIT, incubated in YC, and developed in an "office space" that was once the oven of a cookie factory, we are a group of curious, passionate, and creative problem solvers, and we approach our work with vigor and humility. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information.
Senior RF Design Engineer SkydioSenior RF Design EngineerSan Mateo, California$170,000–$240,000 / yearThe Skydio team combines deep expertise in artificial intelligence, best-in-class hardware and software product development, operational excellence, and customer obsession to empower a broader, more diverse audience of drone users, from utility inspectors to first responders , soldiers in battlefield scenarios , and beyond . The ideal candidate has hands-on experience bringing complex wireless products from architecture through production, including extensive experience with LTE/cellular integration, carrier certification, and PTCRB certification validation.
RF Design Engineer SkydioRF Design EngineerSan Mateo, California$147,500–$240,000 / yearThe Skydio team combines deep expertise in artificial intelligence, best-in-class hardware and software product development, operational excellence, and customer obsession to empower a broader, more diverse audience of drone users, from utility inspectors to first responders , soldiers in battlefield scenarios , and beyond . As intelligent flying machines gain more independence, the demands on range and bandwidth are increasing; there is a huge opportunity to innovate within existing architectures to bring an incredible, highly-engineered product to market, and to define the next generation of RF frameworks and technologies.
RF IC Technology Integration Engineer Broadcom IncRF IC Technology Integration EngineerSan Jose, CA$141,300–$226,000 / yearThe successful candidate will have wide-ranging hands-on experience in RF semiconductor device fabrication and operation, wafer foundry process control, MMIC process integration, new technology qualification, process design kit (PDK) development, RF circuit design and modeling, and RF test development and execution. Part of a global team that supports RF semiconductor technology (GaAs HBT, RF-SOI, RF-CMOS, RF-BiCMOS, GaN HEMT) development and design access for RF front end applications.
Senior RF Engineer Applied Materials IncSenior RF EngineerSanta Clara, CA$147,000–$202,500 / yearIf you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at Accommodations_Program@amat.com, or by calling our HR Direct Help Line at 877-612-7547, option 1, and following the prompts to speak to an HR Advisor. As an Electrical Engineer, you are responsible for designing, modifying, and troubleshooting electrical or electronic engineering assemblies, layouts, schematics, and drawings to advance the equipment that supports our technology.
Principal RF Design Engineer 6 Kratos DefensePrincipal RF Design Engineer 6San Jose, CA$140,000–$200,000 / yearKratos Defense & Security Solutions, Inc. (NASDAQ:KTOS) develops and fields transformative, affordable technology, platforms, and systems for United States National Security related customers, allies, and commercial enterprises. Design RF & microwave amplifier assemblies, analog control circuits, power supplies and power conditioning circuitry, and some basic digital circuitry for command-&-control and fault sensing & reporting.
Senior FPGA RF Signal Processing Engineer Muon Space incSenior FPGA RF Signal Processing EngineerMountain View, CA$138,000–$190,000 / yearTo conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. Experience with general RF digital signal processing techniques in some of the following areas: spectrum monitoring, signal intelligence, modulation/demodulation, filtering, channel estimation, equalization, synchronization, AGC, DPD, etc.
Senior RF Design Engineer Skydio IncSenior RF Design EngineerSan Mateo, CA$170,000–$240,000 / yearThe Skydio team combines deep expertise in artificial intelligence, best-in-class hardware and software product development, operational excellence, and customer obsession to empower a broader, more diverse audience of drone users, from utility inspectors to first responders, soldiers in battlefield scenarios, and beyond. The ideal candidate has hands-on experience bringing complex wireless products from architecture through production, including extensive experience with LTE/cellular integration, carrier certification, and PTCRB certification validation.
RF Design Engineer Skydio IncRF Design EngineerSan Mateo, CA$147,500–$240,000 / yearThe Skydio team combines deep expertise in artificial intelligence, best-in-class hardware and software product development, operational excellence, and customer obsession to empower a broader, more diverse audience of drone users, from utility inspectors to first responders, soldiers in battlefield scenarios and beyond. As intelligent flying machines gain more independence, the demands on range and bandwidth are increasing; there is a huge opportunity to innovate within existing architectures to bring an incredible, highly-engineered product to market, and to define the next generation of RF frameworks and technologies.
RF Test & Systems Engineer Oso Semiconductor Inc.RF Test & Systems EngineerMountain View, CAThis role sits at the intersection of RF testing, systems design, and applications engineering—you will prove our silicon works, build the systems around it, and help customers integrate it. We are looking for an RF Test & Systems Engineer to own the testing, characterization, and system-level validation of our mmWave beamforming chips and phased array platforms.
Senior RF Test Engineer Tarana Wireless, Inc.Senior RF Test EngineerMilpitas, CAFull timeOur RF Team is seeking a talented, experienced, and highly motivated individual to support the development of RF Transceiver boards and Antennas for Tarana’s next-generation wireless access products operating in the 3–7 GHz frequency bands. Our groundbreaking Fixed Wireless Access technology is delivering fiber-class internet speeds worldwide, bridging the digital divide in ways previously thought impossible.
Technical Program Manager - RF & Silicon Photonics STMicroelectronics NVTechnical Program Manager - RF & Silicon PhotonicsSanta Clara, CA$151,200–$189,000 / yearWe are looking for candidates who understand the intersection of light and silicon with product development or applications expertise in at least one of the following: Silicon Photonics (SiPh): Direct experience with PIC (Photonic Integrated Circuit) design, waveguide theory, and integrated lasers/modulators. Lead regular (Weekly, bi-weekly, quarterly) technical calls with customer and internal teams to ensure smooth execution of assigned design programs from inception to product tape-out, delivery of engineering samples and production ramp-up.