RESEARCH ENGINEER - SR. RESEARCH ENGINEER - Computational Combustion Engineer Southwest Research InstituteRESEARCH ENGINEER - SR. RESEARCH ENGINEER - Computational Combustion EngineerSan Antonio, TXLeverage state-of-the-art Computational Fluid Dynamics (CFD) software, including Ansys Fluent, Converge, and OpenFOAM to simulate flow conditions and analyze combustion processes in power generation and propulsion systems. Integrate experimental insights with simulation data to validate models and develop predictive capabilities for combustion processes in power generation and propulsion systems operating under extreme conditions.
RESEARCH ENGINEER - SR. RESEARCH ENGINEER - Liquid Propulsion Systems Engineer Southwest Research Institute - FulltimeRESEARCH ENGINEER - SR. RESEARCH ENGINEER - Liquid Propulsion Systems EngineerSan Antonio, TXFull timeDesired experience, but not required: engineering MS or PhD degrees; range safety; cryogenics; microgravity fluids; GNC familiarity; mechanical design and fabrication; computational programing/scripting; LabVIEW, PID control and data acquisition; SolidWorks; ANSYS products. Solve challenges on components and/or systems that span between the pressurant tanks, through pressurization systems, into the propellant tanks, down the feedlines, combustion, and finally out the engine nozzles.
RESEARCH ENGINEER - SR. RESEARCH ENGINEER - Computational Combustion Engineer Southwest Research Institute - FulltimeRESEARCH ENGINEER - SR. RESEARCH ENGINEER - Computational Combustion EngineerSan Antonio, TXFull timeLeverage state-of-the-art Computational Fluid Dynamics (CFD) software, including Ansys Fluent, Converge, and OpenFOAM to simulate flow conditions and analyze combustion processes in power generation and propulsion systems. Integrate experimental insights with simulation data to validate models and develop predictive capabilities for combustion processes in power generation and propulsion systems operating under extreme conditions.
NewR&D Engineer Wassenburg Medical, Inc.R&D EngineerWarminster, PAFull timeThe R&D Engineer must perform electro-mechanical design, development, and testing functions for Class 2 medical devices throughout the entire product lifecycle in accordance with established design control and risk management procedures. Also responsible for the planning, design, execution, and documentation of V&V testing activities in support of new product introductions and changes to existing products.
RESEARCH ENGINEER - SR. RESEARCH ENGINEER - Avionics Hardware Design & Analysis - Oklahoma City, OK Southwest Research Institute - FulltimeRESEARCH ENGINEER - SR. RESEARCH ENGINEER - Avionics Hardware Design & Analysis - Oklahoma City, OKMultiple LocationsFull timeOur expertise encompasses the design, development, maintenance, and production of advanced hardware and software systems, supporting everything from microcircuits to major subsystems for aircraft and ground support equipment, ensuring mission-critical performance and innovation. Who We Are: The Embedded Systems Section within the Strategic Aerospace Department delivers comprehensive engineering solutions for the aerospace community, specializing in system engineering, technology insertion, requirements generation, cybersecurity, trade studies, and full lifecycle support.
RESEARCH ENGINEER - SR. RESEARCH ENGINEER - Thermal Fluid Systems Engineer Southwest Research Institute - FulltimeRESEARCH ENGINEER - SR. RESEARCH ENGINEER - Thermal Fluid Systems EngineerSan Antonio, TXFull timeObjectives of this Role: Enable modeling and control of complex thermal fluid systems comprising control valves, piping, machinery, heat exchangers, and other various fluid/gas components in oil and gas and power generation applications. Requirements: Requires a Bachelors, Masters or a PhD in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Control Systems Engineering, Computer Engineering or directly related engineering degree field with relevant work experience.
ENGINEER - RESEARCH ENGINEER - Subsea Stress & Fatigue Analysis Southwest Research Institute - FulltimeENGINEER - RESEARCH ENGINEER - Subsea Stress & Fatigue AnalysisSan Antonio, TXFull timeProvide design support using Creo(Pro-E) and/or SolidWorks, working knowledge of welding methods and joint geometries, pressure-related loading/reactions of stiffened structures, and identification/mitigation of fatigue critical locations. 0-5 years: Design of mechanical and/or pressure related systems; Design/Analysis experience with ASME Boiler and Pressure Vessel Code, Section VIII, Division 2 and 3. Use of finite element software with advanced knowledge of load/constraint application and meshing for geometry.
LEAD ENGINEER - SR. RESEARCH ENGINEER - Microwave/Radar Electronic Support Southwest Research InstituteLEAD ENGINEER - SR. RESEARCH ENGINEER - Microwave/Radar Electronic SupportSan Antonio, TXSupport Department management in specific marketing activities, writing proposals, and developing product/technology roadmaps. Objectives of this Role: Design architectures within a high growth environment and then lead a multi-disciplinary team to develop, integrate, and test complex systems.
ENGINEER - RESEARCH ENGINEER - Thermal Engineer Southwest Research Institute - FulltimeENGINEER - RESEARCH ENGINEER - Thermal EngineerSan Antonio, TXFull timeDaily and Monthly Responsibilities: Lead bench- and pilot-scale thermal-fluid experiments, including design of flow loops; integration of pumps, heat exchangers, cold plates, chillers, CDUs; installation of temperature/pressure/flow instrumentation; and commissioning of safe, fully integrated test systems. Design and optimize thermal management and fluid systems using first principles, analytical methods, and CFD tools (e.g., ANSYS Fluent, STAR-CCM+); validate models with experimental data for data centers, space systems, electronics cooling, HVAC, and energy-water applications.
ENGINEER - RESEARCH ENGINEER - Fluids Engineering Dept. Experimental Engineer Southwest Research Institute - FulltimeENGINEER - RESEARCH ENGINEER - Fluids Engineering Dept. Experimental EngineerSan Antonio, TXFull timeExperience with one or more of the following: LabVIEW programming or similar data acquisition and controls experience, modeling in SolidWorks/Creo/Ansys/Fluent, or programming using Excel VBA/MathCAD/Matlab/Python is required. Daily and Monthly Responsibilities: Conduct experimental laboratory research for complex fluid flow systems at existing oil, water, gas, and particle multiphase flow facilities and other specialized temporary test setups.
ENGINEER - RESEARCH ENGINEER - Avionics Hardware - Oklahoma City, OK Southwest Research Institute - FulltimeENGINEER - RESEARCH ENGINEER - Avionics Hardware - Oklahoma City, OKOklahoma City, OKFull timeOur expertise encompasses the design, development, maintenance, and production of advanced hardware and software systems, supporting everything from microcircuits to major subsystems for aircraft and ground support equipment, ensuring mission-critical performance and innovation. Who We Are: The Embedded Systems Section within the Strategic Aerospace Department delivers comprehensive engineering solutions for the aerospace community, specializing in system engineering, technology insertion, requirements generation, cybersecurity, trade studies, and full lifecycle support.
ENGINEER - RESEARCH ENGINEER - Turbomachinery Aerodynamics Southwest Research Institute - FulltimeENGINEER - RESEARCH ENGINEER - Turbomachinery AerodynamicsSan Antonio, TXFull timeWho We Are: The Aero Thermal Modeling and Testing subsection within the Rotating Machinery Development (RMD) section of the Machinery Department is focused on aerodynamic, heat transfer, thermal-fluid, and technoeconomic analyses together with the development of demonstration testing facilities for advanced power systems, long duration energy storage applications, and industrial decarbonization technologies. Provide analytical or experimental support to multiple projects in a team environment, which can include literature reviews, data collection, test design, developing computational simulations, deriving first-principles or correlative-based solutions to problems.
LEAD ENGINEER - SR. RESEARCH ENGINEER - Microwave/Radar Electronic Support Southwest Research Institute - FulltimeLEAD ENGINEER - SR. RESEARCH ENGINEER - Microwave/Radar Electronic SupportSan Antonio, TXFull timeSupport Department management in specific marketing activities, writing proposals, and developing product/technology roadmaps. Objectives of this Role: Design architectures within a high growth environment and then lead a multi-disciplinary team to develop, integrate, and test complex systems.
Principal Casting and Metallurgical Engineer JobotPrincipal Casting and Metallurgical EngineerDavenport, IA$100,000–$140,000 / yearThis role offers the opportunity to drive large-scale improvements across multiple manufacturing sites, lead complex technical investigations, support research and development activities, and mentor engineering teams throughout the organization. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal.
NewR&D Engineer- Heat Exchange Nesco Resource, LLCR&D Engineer- Heat ExchangeCatoosa, OK$100,000–$130,000 / yearThis role combines hands-on engineering with product development, customer application support, and manufacturing collaboration, making it ideal for someone who understands both heat transfer technology and how engineered products are actually built . We're seeking an experienced R&D Engineer with direct heat exchanger experience to support the development, application, and continuous improvement of engineered thermal equipment.
Electrical Engineer - Manufacturing JobotElectrical Engineer - ManufacturingWest Lafayette, IN$90,000–$110,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. The successful candidate will be responsible for designing, estimating, installing, and troubleshooting these systems to ensure the smooth and efficient operation of our manufacturing processes.
Electrical Engineer JobotElectrical EngineerMilwaukee, WI$120,000–$150,000 / yearAs an award-winning, integrated architecture, engineering, and planning firm, we are seeking a Senior Electrical Project Engineer to lead and manage large-scale projects and electrical teams both locally and across the country. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal.
Photonics Test Development Engineer NY CreatesPhotonics Test Development EngineerRochester, NY$120,000–$160,000 / yearFull timeMeasure photonic devices and circuits using test equipment including BERT, AWG, Digital Signal Analysis for eye diagrams, RF and Optical Spectrum Analyzers, Real Time Oscilloscopes, Lasers, Optical Power meters, Polarization control, automated wafer and die prober, manual die prober. For positions requiring such access, offers of employment are contingent upon the employer being able to obtain the necessary authorization, including, if required, an export license from the U.S. Department of Commerce's Bureau of Industry and Security, the U.S. Department of State's Directorate of Defense Trade Controls, or other government agencies.
NewR&D Product Care Engineer Synerfac Technical StaffingR&D Product Care EngineerHeber Springs, AROur client is hiring an R&D Product Care Engineer to drive design, testing, and continuous improvement while partnering with cross-functional teams to enhance product reliability and performance. By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners.
Thermal Engineer Synerfac Technical StaffingThermal EngineerColumbus, OHThe thermal engineer would be responsible for working with the engineering and R&D teams to drive continuous improvement in thermal simulation practices, develop engineering tools and procedures that reduce product development time, mentor engineering staff, and provide technical leadership on complex customer applications. D. in Mechanical Engineering, Thermal Sciences, Heat Transfer, Aerospace Engineering, Applied Physics, Chemical Engineering, Materials Science, or a related engineering discipline.