Lakeland Community CollegePart-time Staff: Engineering Lab Technician Lakeland Community CollegePart-time Staff: Engineering Lab TechnicianKirtland, OHMinimum three years of work experience in the operation and repair of electronic test equipment, welding and machining equipment, and basic civil and mechanical engineering equipment including the installation and maintenance of engineering computer and network hardware and software. Perform tasks in support of the daily operation of the Manufacturing Learning Center: train, schedule and oversee lab assistants and workers; prepare equipment, operating and lab experiment manuals and provide technical assistance for jobs.
Deloitte Touche Tohmatsu LtdConsultant, Workday Technical Student Records and Recruiting & Admissions Implementation Deloitte Touche Tohmatsu LtdConsultant, Workday Technical Student Records and Recruiting & Admissions ImplementationCleveland, OH$85,000–$155,000 / yearAs a Consultant, Functional Transformation on our Human Capital team, you will: Lead the end-to-end implementation of Workday Student Records and Recruiting & Admissions modules, participating in all project phases including discovery, design, configuration, testing, deployment, and post-go-live support. The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs.
The University of AkronPart-Time Faculty - Department of Electrical and Computer Engineering The University of AkronPart-Time Faculty - Department of Electrical and Computer EngineeringAkron, OhioApplicants are expected to possess technical expertise as evidenced by a combination of academic degree(s), relevant work experience, engineering licensure, or specialized training in one or more of the following areas: Power, Microcontrollers, Controls Systems, Circuit Analysis, Analog Electronics, Digital Electronics, Machinery, MATLAB or LabVIEW. Duties include course instruction (planning, implementation, evaluation, and assessment) in the Electrical and Electronics Engineering Technology Program, and compliance with other University policies and practices.
Area TempsMechanical/Electrical/Industrial Engineering -Summer Internship Area TempsMechanical/Electrical/Industrial Engineering -Summer InternshipEuclid, OHThis role will support and lead continuous improvement initiatives within our Electrical Motor Distribution Center and Modification Shop. A manufacturing company is seeking a motivated Mechanical or Electrical Engineering student to join our team as a Summer Intern.
Vontier CorpEngineering Manager Vontier CorpEngineering ManagerStow, OHFrom integrated payments and EV charging software to carwash technology and retail automation, we help customers stay productive and prepared for a rapidly evolving industry. Driven by continuous improvement and the dedication of Team Vontier, we empower businesses to think bigger, act boldly, and thrive on the road ahead.
AMETEK, IncElectrical Engineering Co-op - Fall 2026 AMETEK, IncElectrical Engineering Co-op - Fall 2026Kent, OHFull timeMust be enrolled in a relevant Engineering degree program at an accredited university; Mechanical and Electrical Engineering majors would typically be a good fit, but similar majors are considered. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion.
AMETEK IncMechanical Engineering Co-op - Fall 2026 AMETEK IncMechanical Engineering Co-op - Fall 2026Kent, OHWhat we are looking for: Must be enrolled in a relevant Engineering degree program at an accredited university; Mechanical Engineering majors would be a good fit, but similar majors are considered. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion.
Moog IncIntern, Operations Engineering Moog IncIntern, Operations EngineeringCleveland, OH$25.50–$31 / hourWork experience may include interpreting work instructions, documentation, executing test requirements, part assembly setting up test stands, and/or software creation and testing based on the student's educational discipline. Students within the Moog U.S. Internship Program are expected to have a professional disposition, effective communication skills, a strong desire to learn, a positive attitude, and the ability to work in a team environment.
Akron Children's HospitalIntern ISD-Biomedical Engineering Akron Children's HospitalIntern ISD-Biomedical EngineeringAkron, OHOur internship program is intended to provide an opportunity for interns to gain a better understanding of the various job opportunities available throughout Akron Children's Hospital and to build a pipeline of candidates who will join Akron Children's Hospital upon their college graduation. Additionally, you will work closely with seasoned Biomedical Engineering team members to provide medical equipment support, regulatory compliance, and input to various levels of the hospital including management and leadership.
Howmet Aerospace IncSummer 2026 Internship - Process Engineering Howmet Aerospace IncSummer 2026 Internship - Process EngineeringCleveland, OHTo learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report. An internship at Howmet Engine Systems will provide an invaluable experience that you can utilize in any roles, and it's Howmet Aerospace's goal to evaluate our interns for potential entry-level openings.
Howmet Aerospace IncCo-Op - Manufacturing Engineering (Fall 2026) Howmet Aerospace IncCo-Op - Manufacturing Engineering (Fall 2026)Cleveland, OHManufacturing Engineering (Forging): Develop problem solving skills in support of diagnosing and preventing equipment failures Develop machine design skills by designing improvements to the plant's equipment Learn how to make a business case in support of making capital investments to improve the plant, process, or machinery Become familiar with industrial robotics and automation. Process Engineering: Develop an understanding of metal forming processes and critical variables to control for quality and productivity Work with a cross functional team in the plant to support successful operation of an automated forging line Develop problem solving skills in support of process/production troubleshooting.
Alpha TechnologiesMechanical Engineering Intern Alpha TechnologiesMechanical Engineering InternHudson, OHFull timeThe Mechanical Engineering Intern will work closely with a supervising engineer in their first semester, as part of a team driving the development of innovative products, cutting-edge technologies, and advancements in manufacturing processes and supply chain solutions. Alpha Technologies is the global leader in designing, manufacturing, servicing, and supporting precision rubber and polymer laboratory instrumentation as well as data acquisition and analysis software systems.
Eaton Corporation PlcManufacturing Engineering Intern Eaton Corporation PlcManufacturing Engineering InternEuclid, OH$20.77–$25.96 / hourAfter making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. What you'll do: The objective of the internship is to develop students through practical manufacturing and operations experiences, as well as assist in the personal development of leadership attributes through training, networking, and coaching.
NMG AerospaceCo-Op Engineering Fall 2026 NMG AerospaceCo-Op Engineering Fall 2026Stow, OHEducation: Must be a currently enrolled student pursuing a Bachelor of Science Degree in Engineering, preferably Mechanical or Aerospace Engineering, must have completed sophomore year criteria from an ABET accredited college or university. Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies.
Langan Engineering & Environmental Services IncTraffic Engineering Intern / Co-op - Fall 2026 Langan Engineering & Environmental Services IncTraffic Engineering Intern / Co-op - Fall 2026Cleveland, OH$22–$29 / hourStudent actively pursuing a four year or advanced degree in Civil or Traffic Engineering / Transportation Planning; Cumulative GPA of 3.0 or greater is preferred; Familiarity with HCS, SYNCHRO and the MUTCD is highly desirable; Knowledge of AutoCAD, MicroStation and/or SoftDesk civil software are a plus; Excellent communication skills, written and verbal; Strong attention to detail with excellent analytical and judgment capabilities; Ability to effectively work independently and in a team environment; and. Perform traffic observation; Prepare technical reports, calculations, design plans and specifications for traffic/transportation projects such as transportation impact studies, highway occupancy permits, traffic signals, traffic and pedestrian circulation, and transportation master plans; Observe construction; and.
DLR GroupMechanical Engineering Intern | Fall 2026 DLR GroupMechanical Engineering Intern | Fall 2026Cleveland, OH$20–$26 / hourThese classes include EP-specific onboarding, design culture, marketing and business development, sustainability, design technology, communication style education, mentoring, resource and project management, construction site opportunities, research, equity, design agency, and career next steps. Position Summary: As a Mechanical Engineering Intern at DLR Group you will be responsible for assisting in the design process of mechanical systems from schematics through construction administration on a wide range of building types.
City Of AkronEngineering Co-op City Of AkronEngineering Co-opAkron, OHCity of Akron permanent, full-time employees and their eligible dependents are covered by a comprehensive health plan including emergency accident care, inpatient hospitalization, surgical, diagnostic services, outpatient services, prescription drug coverage, dental, vision and life insurance. Minimum Qualifications Completion of the required schooling at an accredited college or university for the start of co-op program in civil, structural, mechanical, chemical, industrial, or electrical engineering; construction engineering technology, surveying and mapping technology, landscape architecture, or architecture.
U.S. Department of the InteriorSeasonal Engineering Equipment Operator U.S. Department of the InteriorSeasonal Engineering Equipment OperatorPeninsula, OH$31.13–$36.33 / hourOperate graders, bulldozers, backhoes and other heavy engineering equipment and heavy trucks in all weather conditions; in confined areas close to buildings; on narrow gravel roads and uneven terrain adjacent to exposed drop-offs and obstructions in the performance of roads maintenance and project work. If you are a veteran within 120 days of discharge, you must submit signed documentation from the Armed Forces certifying: 1) your expected release/retirement from active duty, 2) under honorable conditions, 3) your pay grade/rank/rate at time of discharge, 4) dates of active duty service, 5) any campaign or expeditionary medals received, & 6) dated within 120 days of your separation.
Steris PlcSoftware Engineering Co-op - Fall 2026 Steris PlcSoftware Engineering Co-op - Fall 2026Mentor, OH$24–$30 / hourTasks may include software component development and verification, technology assessment, debugging software defects, and automation of engineering and factory tests to support product the development and production of sterilizers and connected devices used in healthcare and life sciences industries. The Software Engineering Co-op will gain experience in software development and support the Software Engineering Team in new product development and sustaining existing products, working under the guidance of STERIS software engineers.
Preformed Line Products CoEngineering Drafting Technician Preformed Line Products CoEngineering Drafting TechnicianMayfield Village, OHDuties & Responsibilities: Develop detailed drawings and solid models of complex parts and assemblies for new product development and customer support, following the direction of engineers. Prepare artistic graphic work for product quotations, application sheets, and catalog illustrations, and/or visual aids for departmental use.
Case Western Reserve UniversityNewDirector of National Development - Case School of Engineering Case Western Reserve UniversityDirector of National Development - Case School of EngineeringCleveland, OH$71,041–$89,867 / yearPlan strategies for the identification, cultivation, solicitation and stewardship of gifts for a portfolio of 125 major gifts prospects with a giving potential in the range of $100,000 to $250,000; develop and implement strategic cultivation and solicitation strategies with the responsibility of raising private support and the achievement of personal fundraising goals. Functioning as part of a university-wide development team, the incumbent will be expected to work collegially, and in partnership, with school-based colleagues and develop strong relationships with central development personnel and university trustees.
Emerson Electric CoElectrical Engineering Co-op (Fall 2026) Emerson Electric CoElectrical Engineering Co-op (Fall 2026)Elyria, OH$20–$25 / hourFor This Role, You Will Need: Currently pursuing a Bachelors Degree in Electrical Engineering, Computer Science, Computer Engineering or related field Ability to work full-time during the scheduled semester Legal authorization to work in the United States - Sponsorship will not be provided Preferred Qualifications That Set You Apart: Cumulative GPA of 3.00 or higher Ability to return for multiple co-op rotations Previous work or project experience related to hardware and firmware Experience with C, C++, and Python Experience with circuit board design Sophomore or Junior class status. Work assignments will rotate through the following areas based on the student's level of academic achievement: Engineering Lab - Exposure to a variety of products in our product line working closely with lab technicians and engineers to assist in conducting 'hands-on' feasibility studies of new product concepts or competitive evaluations.
University of AkronDepartment Chair, Chemical, Biomolecular, and Corrosion Engineering University of AkronDepartment Chair, Chemical, Biomolecular, and Corrosion EngineeringAkron, OHD. in Chemical Engineering or a Bio-related Engineering field and hold the rank of Associate Professor (tenure-track), Associate Professor of Practice or Associate Professor of Instruction or higher at The University of Akron. Be a champion for the department (including faculty, staff, and students) within the college, within the university and within the larger chemical engineering and related community, both domestic and international.
Akron Public SchoolsEngineering/Robotics Instructor Akron Public SchoolsEngineering/Robotics InstructorAkron, OHQUALIFICATIONS: Required: Currently hold an Integrated Math or Science license issued by the state of Ohio and eligible to teach students in middle school grade levels, or, Currently hold a Career Technical teaching license issued by the state of Ohio and eligible to teach courses in the Engineering & Science Technologies (F6) pathway; or, Possess an Ohio five-year professional license or four-year alternative resident educator license that includes middle school grade levels. Position Description: Work with the Office of College and Career Academies and be responsible for the pathway, recruitment of students, collaborate with community partnerships, market pathway successes, develop course of study, participate in group activities and take part in action research when appropriate.
AECOMCivil Engineering Intern AECOMCivil Engineering InternAkron, OHWe invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. Minimum Requirements: Candidates must be pursuing an ABET accredited undergraduate or graduate degree program in Civil Engineering, and/or related field with credit hours achieved for Junior or Senior standing, and must have completed at least two years of study.
Parker Hannifin CorpProduct Engineering Co-Op (Fall 2026/Spring 2027) Parker Hannifin CorpProduct Engineering Co-Op (Fall 2026/Spring 2027)Wickliffe, OHIn this multifunctional role, the ideal candidate will possess a strong background in problem-solving as well as a good combination of office and mechanical testing skills. Students must be able to work 40 hours per week during the Fall 2026 or Fall 2026 & Spring 2027 semesters.
Parker Hannifin CorpChemical/Materials Engineering Co-Op (Fall 2026/Spring 2027) Parker Hannifin CorpChemical/Materials Engineering Co-Op (Fall 2026/Spring 2027)Wickliffe, OHProvide polymer compounding, processing, and testing expertise to the Fluid Connectors Group Materials Development Team, with a focus on improving existing materials and developing new materials for use in hose and tubing applications. Position Requirements: Must be pursuing an undergraduate degree in polymer science, polymer engineering, materials science, materials engineering, chemical engineering, mechanical engineering, or a closely-related field.
Cuyahoga Community CollegeAdjunct Faculty, Mechanical Engineering Technology Cuyahoga Community CollegeAdjunct Faculty, Mechanical Engineering TechnologyCleveland, OHCourses include, but are not limited to, CAD, thermodynamics, statics, dynamics, fluid power, instrumentation and control, strength of materials, and machine design. Teaches a full range of lecture and lab courses in the Mechanical Engineering & Mechanical Engineering Technology (MET) program.
Cuyahoga Community CollegeTenure Track Faculty, Mechanical Engineering Technology Cuyahoga Community CollegeTenure Track Faculty, Mechanical Engineering TechnologyCleveland, OHCourses include but are not limited to: • Thermodynamics • Statics • Dynamics • Fluid Power • Instrumentation and Control • Strength of Materials • Machine Design • Robotics • PLC Automation • Lean Manufacturing • Electromechanical courses. Description Teaches a full range of lecture and lab courses in the Mechanical Engineering & Mechanical Engineering Technology MET Smart Manufacturing and Automation programs.
Cuyahoga Community CollegeAdjunct Faculty, Manufacturing/Industrial Engineering Technology Cuyahoga Community CollegeAdjunct Faculty, Manufacturing/Industrial Engineering TechnologyParma, OHCourses include, but are not limited to, CAD, machining tools, GD&T, CNC, quality control, and lean manufacturing. Evaluates and grades students class work, laboratory work, assignments, papers, and examinations.
Cuyahoga Community CollegeAdjunct Faculty, Electrical/Electronic Engineering Technology Cuyahoga Community CollegeAdjunct Faculty, Electrical/Electronic Engineering TechnologyWestlake, OHCourses include, but are not limited to, analog electronics, digital electronics, power electronics, printed circuit board layout design, PLC, and embedded software programming. Evaluates and grades students class work, laboratory work, assignments, papers, and examinations.
Cuyahoga Community CollegeAdjunct Faculty, Construction Engineering Technology Cuyahoga Community CollegeAdjunct Faculty, Construction Engineering TechnologyHighland Hills, OHCourses include, but are not limited to, construction orientation, CAD, cost estimates, construction scheduling, and project management. Evaluates and grades students class work, laboratory work, assignments, papers, and examinations.
Cuyahoga Community CollegeAdjunct Faculty, Integrated Systems Engineering Technology Cuyahoga Community CollegeAdjunct Faculty, Integrated Systems Engineering TechnologyHighland Hills, OHCourses include, but are not limited to, applied electricity, HVAC, PLC, motor controls, fluid power, and welding. Teaches a full range of lecture and lab courses in the Integrated Systems Engineering Technology (ISET) program.