Traffic Signal Technician I Asplundh Tree ExpertTraffic Signal Technician IRaleigh, NCFull timeCONTINUOUS (up to 100%): standing, walking, sense of touch, speaking clearly, seeing distant, lifting over 10 lbs to 50 lbs., seeing, reaching, range of motion, hearing-speech range, depth perception, color vision, lifting, carrying, pushing, pulling, balancing, lifting up to 10 lbs., lifting up to 50 lbs. This position performs technical work in the construction, installation, maintenance, and repair of traffic signal systems, will involve a variety of specialized tasks that are reviewed to ensure quality.
NewTraffic Signal Technician M.B. Haynes CorpTraffic Signal TechnicianGastonia, NCPosition Summary: The primary responsibility of the Traffic Signal Technician would be to work on the installation, operation, and maintenance of electrical, electronic, and digital controlled traffic signal and lighting systems. Responsibilities: Operate equipment in signal installation such as dump trucks, air compressors, jackhammers, trenchers, backhoes, bucket trucks, pole trucks, and forklifts.
Traffic Signal Technician II City of AshevilleNCTraffic Signal Technician IIAsheville, NCrelated equipment; troubleshoots, identifies, and repairs cabinet wiring and controller faults; assembles, adjusts, replaces, and cleans traffic signals, broken wires, missing visors and other worn or faulty parts; repairs and replaces. electronic parts; identifies, transfers, and resolves conflicting timing issues and system communication errors; adjusts signal timing, as needed; responds to traffic control device outage calls; and completes work orders and.
Traffic Signal Technician II City of Asheville, NCTraffic Signal Technician IIAsheville, NCThis position is responsible for maintenance and repair of City owned traffic signals, street lights, and related equipment. The City of Asheville is seeking qualified applicants for the position of Traffic Signal Technician in the Transportation Department .
Traffic Signal Systems Technician II City of BurlingtonTraffic Signal Systems Technician IIBurlington, NC$50,003.20–$80,017.60 / yearThe employee is subject to hazards including a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to heat, cold, vibration, oils and noise. Work typically involves the ability to physically perform the basic life operational functions of kneeling, crouching, reaching, standing, walking, pulling, lifting, fingering, talking, hearing and repetitive motions.
Electronics Technician I - Traffic Services Department of TransportationElectronics Technician I - Traffic ServicesNew Hanover County, North CarolinaThis position provides technical work in the installation, repair, and maintenance of a wide variety of electrical and electronic equipment with emphasis on traffic control equipment & related devices for Division 3. The duties to be performed include: installing traffic signal equipment, wiring detectors, installing and wiring controllers, tracing out electrical wiring diagrams to locate trouble, dismantling and reassembling components, replacing worn or faulty parts. Skills of this position include: general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose source of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment.
Electronics Technician I - Traffic Services State of North CarolinaElectronics Technician I - Traffic ServicesNew Hanover County, NC$41,206–$72,113 / yearThis position provides technical work in the installation, repair, and maintenance of a wide variety of electrical and electronic equipment with emphasis on traffic control equipment & related devices for Division 3. The duties to be performed include: installing traffic signal equipment, wiring detectors, installing and wiring controllers, tracing out electrical wiring diagrams to locate trouble, dismantling and reassembling components, replacing worn or faulty parts. Skills of this position include: general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose source of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment.
Traffic Management Specialist AtkinsRealis Group IncTraffic Management SpecialistAsheville, NC$20–$22 / hourNote to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency. This role will manage traffic congestion on roadways throughout the state and respond to planned and unplanned traffic incidents including road work, vehicle crashes, and major adverse weather.
Traffic Project Engineer I Johnson, Mirmiran & Thompson IncTraffic Project Engineer ISylva, NCJohnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm with more than 2,800 professionals, providing a full range of multidisciplinary engineering, architecture, information technology, and related services to public agencies and private clients throughout the United States. Position summary: Responsible for traffic engineering design using knowledge of general engineering principles and practices to interpret, organize, execute and coordinate assignments with limited supervision.
Traffic Engineer I Parsons CorpTraffic Engineer ICharlotte, NC$63,600–$111,300 / yearThese high visibility Design-Build and Public Private Partnership "P3" projects and many others are career defining opportunities and offer complex, challenging work for our entire professional staff and new hires, who work seamlessly together from offices across the country. In this role, you will help deliver the design for projects that have a construction value greater than $1 billion, and in turn assist in enhancing the mobility, safety, and reliability for communities who live along and travel through these critical corridors.
Traffic Assistant Project Manager (APM) STVTraffic Assistant Project Manager (APM)Raleigh, North CarolinaThere is significant growth opportunity across multiple project types including highway and interchange design, roadway widenings, intersection improvements (including innovative intersections), and multimodal/bicycle/pedestrian improvements throughout STV’s South Region. The position will focus on technical production—primarily traffic signal design and ITS design—while also supporting broader traffic design elements including signing, pavement marking, and work zone traffic control plans.
NewIntelligent Transportation System (ITS) Technician City of Wilmington NCIntelligent Transportation System (ITS) TechnicianWilmington, NC$10–$24 / hourMaintains ITS infrastructure at the field level by troubleshooting and restoring operation to devices, testing equipment, performing preventive maintenance, installing and maintaining communication systems and ensures work zone traffic control procedures are performed under state and federal guidelines to maximize transportation system efficiency. We are looking for an Intelligent Transportation Systems (ITS) Technician to join a skilled team where youll work with advanced traffic signals, cameras, communication systems, and intelligent transportation technology while gaining hands-on experience, collaborating with industry partners, and making a visible impact on public safety every day.
NewIntelligent Transportation Systems (ITS) Sr. Technician City of Wilmington NCIntelligent Transportation Systems (ITS) Sr. TechnicianWilmington, NC$10–$24 / hourServing as field crew leader by providing leadership, skilled technical support and guidance to crew members, estimating time and materials needed for tasks, coordinating work with engineers and contractors and demonstrating continuous effort for personnel and systems improvement OR Serves as bench technician by diagnosing, servicing, repairing, and maintaining electronic control systems; evaluating equipment for system compatibility; maintaining records of inventory; assisting in the evaluation of new equipment; and training personnel to minimize hardware replacement costs and downtime and to promote personnel advancement. Education and Experience: Associates degree in Applied Science of Electrical/Electronics, Electronics Engineering, and/or Instrumentation or a closely related field and two (2) years of experience installing, inspecting, maintaining, calibrating, and repairing electronic equipment and machinery for an industrial or public service agency or high school diploma and four (4) years of installing, inspecting, maintaining, calibrating, and repairing electronic equipment and machinery for an industrial or public service agency.
Electronics Technician I/Division 4 Department of TransportationElectronics Technician I/Division 4Wilson, North CarolinaThis position provides technical work in the installation, repair, and maintenance of a wide variety of electrical and electronic equipment with emphasis on traffic control equipment & related devices for Division 4. The duties to be performed include: installing traffic signal equipment, wiring detectors, installing and wiring controllers, tracing out electrical wiring diagrams to locate trouble, dismantling and reassembling components, replacing worn or faulty parts. Skills of this position include: general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose source of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment.
Electronics Technician I - Division 7 Department of TransportationElectronics Technician I - Division 7Guilford, North CarolinaSkills of this position include: general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose source of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment. • Valid, current North Carolina driver’s license appropriate for the type of vehicle to be operated (Note: Employees permanently residing in adjacent states may operate a DOT vehicle using a current, valid, appropriate driver's license from their state of residence.).
Electronics Technician I - Division 5 Department of TransportationElectronics Technician I - Division 5Durham County, North CarolinaSkills of this position include: general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose source of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment. • Valid, current North Carolina driver’s license appropriate for the type of vehicle to be operated (Note: Employees permanently residing in adjacent states may operate a DOT vehicle using a current, valid, appropriate driver's license from their state of residence.).
Power Generation Equipment Field Technician (Commercial Generators, Electrical Controls, Mechanical, Microgrid) Southern CoPower Generation Equipment Field Technician (Commercial Generators, Electrical Controls, Mechanical, Microgrid)Wilmington, NCLevel III Technician requires six years of field experience servicing generator systems with extensive experience on 500KW+, proficient with preventative maintenance, paralleling switch gear, ATS repairs, controller retrofits and Loadbanking equipment. Physical Activity: 85% physical activity required on customer site working with equipment, 15% form completion, email, other administrative tasks and completing technical support activities by way of telephone and computer communication.
Generator Field Technician (Commercial, Electrical Controls, Mechanical, Microgrid) Southern CoGenerator Field Technician (Commercial, Electrical Controls, Mechanical, Microgrid)Charlotte, NCLevel III Technician requires six years of field experience servicing generator systems with extensive experience on 500KW+, proficient with preventative maintenance, paralleling switch gear, ATS repairs, controller retrofits and Loadbanking equipment. Physical Activity: 85% physical activity required on customer site working with equipment, 15% form completion, email, other administrative tasks and completing technical support activities by way of telephone and computer communication.
Test Technician I - 1st Shift (Onsite) RTX CorpTest Technician I - 1st Shift (Onsite)Wilson, NCRegardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management.
Test Technician II - 1st Shift (Onsite) RTX CorpTest Technician II - 1st Shift (Onsite)Wilson, NCRegardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management.
Test Technician II - 1st Shift (Onsite) RTXTest Technician II - 1st Shift (Onsite)Wilson, North CarolinaRegardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world – and access to Collins sites when their work requires in-person meetings. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management.
Electronics Technician I/Division 4 State of North CarolinaElectronics Technician I/Division 4Nash County, NC$41,206–$72,113 / yearThis position provides technical work in the installation, repair, and maintenance of a wide variety of electrical and electronic equipment with emphasis on traffic control equipment & related devices for Division 4. The duties to be performed include: installing traffic signal equipment, wiring detectors, installing and wiring controllers, tracing out electrical wiring diagrams to locate trouble, dismantling and reassembling components, replacing worn or faulty parts. Skills of this position include: general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose source of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment.
Electronics Technician I - Division 5 State of North CarolinaElectronics Technician I - Division 5Durham, NC$41,206–$72,113 / yearSkills of this position include: general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose source of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment. Valid, current North Carolina driver's license appropriate for the type of vehicle to be operated (Note: Employees permanently residing in adjacent states may operate a DOT vehicle using a current, valid, appropriate driver''s license from their state of residence.).
Electronics Technician I - Division 7 State of North CarolinaElectronics Technician I - Division 7Guilford County, NC$41,206–$72,113 / yearSkills of this position include: general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose source of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment. Valid, current North Carolina driver's license appropriate for the type of vehicle to be operated (Note: Employees permanently residing in adjacent states may operate a DOT vehicle using a current, valid, appropriate driver's license from their state of residence.).
NewService Technician Suburban Propane Partners LPService TechnicianNCHeadquartered in Whippany, New Jersey, Suburban Propane has been in the customer service business since 1928 and is a nationwide distributor of propane, renewable propane, renewable natural gas ("RNG"), fuel oil and related products and services, as well as a marketer of natural gas and electricity and producer of and investor in low carbon fuel alternatives, servicing the energy needs of approximately 1 million residential, commercial, governmental, industrial and agricultural customers through approximately 700 locations across 42 states. To operate our company vehicles, you must have a minimum of a Class B Commercial Driver's License (CDL) with HAZMAT, tanker, and air brake endorsements as well as a valid Medical Examiner's Certificate allowing for operation in interstate commerce.
Generator Field Technician (Commercial, LV/MV Electrical, Power Distribution, Mechanical, Microgrid, Data Center) Southern CoGenerator Field Technician (Commercial, LV/MV Electrical, Power Distribution, Mechanical, Microgrid, Data Center)Sanford, NC$30–$47 / hourCommercialGenerators #Switchgear #LowVoltage #MediumVoltage #BatteryStorage #EnergyStorage #ATS #LoadBankTesting #PLCControls #Woodward #Beckwith. Physical Activity: 85% physical activity required on customer site working with equipment, 15% form completion, email, other administrative tasks and completing technical support activities by way of telephone and computer communication.
SkillBridge: Manufacturing and Maintenance Technician Airbus SESkillBridge: Manufacturing and Maintenance TechnicianKinston, NCTargeted Military Backgrounds:Coast Guard: MK (Machinery Technician), AET (Avionics Electrical Technician)Army: 94Y (Automatic Test Systems Operator/Maintainer), 91L (Construction Equipment Repairer)Airforce: 2A6X2 (Aerospace Ground Equipment - AGE)Navy: MR (Machinery Repairman), AS (Aviation Support Equipment Technician)Marine Corps: 13XX (Engineer, Construction, Facilities, & Equipment)Take your career to a new level and apply online now! Required Experience:2 years minimum experience with hands-on experience in the maintenance of industrial equipment, ADU''s, drilling templates, cutting tools or test equipment.Preferred:5+ years minimum experience in with hands-on experience in the maintenance of industrial equipment, ADU''s, drilling templates, cutting tools and test equipment.
NewService Technician Suburban PropaneService TechnicianBayboro, North CarolinaFull timeHeadquartered in Whippany, New Jersey, Suburban Propane has been in the customer service business since 1928 and is a nationwide distributor of propane, renewable propane, renewable natural gas ("RNG"), fuel oil and related products and services, as well as a marketer of natural gas and electricity and producer of and investor in low carbon fuel alternatives, servicing the energy needs of approximately 1 million residential, commercial, governmental, industrial and agricultural customers through approximately 700 locations across 42 states. Qualifications: To operate our company vehicles, you must have a minimum of a Class B Commercial Driver’s License (CDL) with HAZMAT, tanker, and air brake endorsements as well as a valid Medical Examiner’s Certificate allowing for operation in interstate commerce.
Power Generation Equipment Field Technician (Commercial, Electrical Controls, Mechanical, Microgrid) PowerSecure, Inc.Power Generation Equipment Field Technician (Commercial, Electrical Controls, Mechanical, Microgrid)Charlotte, NCLevel IV Technician requires ten years of field experience servicing generator systems of all sizes and applications, expert in preventative maintenance, paralleling switch gear, retrofitting advanced controls and Loadbanking equipment. Physical Activity: 85% physical activity required on customer site working with equipment, 15% form completion, email, other administrative tasks and completing technical support activities by way of telephone and computer communication.
NewElectronics Technician I North CarolinaElectronics Technician IFayetteville, NC$41,206–$72,113 / yearSkills of this position include general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose sources of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment. Valid, current North Carolina driver's license appropriate for the type of vehicle to be operated (Note: Employees permanently residing in adjacent states may operate a DOT vehicle using a current, valid, appropriate driver's license from their state of residence.).
NewElectronics Technician I - Division 7 North CarolinaElectronics Technician I - Division 7Greensboro, NCSkills of this position include: general knowledge of the principles and practices applied in the safe and efficient use of tools, materials and test equipment used in electrical/electronic trade, ability to diagnose source of equipment failures, ability to repair/maintain a wide variety of complex electrical equipment. Minimum Education and Experience: Associate's degree in electronics from an appropriately accredited institution and one year of experience in the repair and maintenance of a variety of specialized electronic devices, preferably including some responsibility for circuit modification; or an equivalent combination of training and experience.
Field Systems Technician (Night Mon - Thurs 5pm - 4am) Ferrovial SEField Systems Technician (Night Mon - Thurs 5pm - 4am)Charlotte, NCInstallation, preventive and corrective maintenance of toll collection equipment to include lane controllers (servers & PC hardware), RFID, power supplies, closed circuit television cameras, microwave vehicle detectors, network components (routers, switches, cabling) and dynamic message signs. The project consists of constructing new express lanes, converting the current High Occupancy Vehicle (HOV) lanes to Express Lanes, repaving the general-purpose lanes and implementing a dynamic pricing toll system.
Generator Field Technician (Commercial, LV/MV Electrical, Power Distribution, Mechanical, Microgrid, Data Center) PowerSecure, Inc.Generator Field Technician (Commercial, LV/MV Electrical, Power Distribution, Mechanical, Microgrid, Data Center)Durham, NC$30–$47 / hourCommercialGenerators #Switchgear #LowVoltage #MediumVoltage #BatteryStorage #EnergyStorage #ATS #LoadBankTesting #PLCControls #Woodward #Beckwith. Level II Technician requires three years of field experience servicing generator systems with some experience on 500kw+, proficient with preventative maintenance, retrofitting basic controls, minor ATS repairs and loadbanking equipment.
Electro/Mechanical Test Technician OnticElectro/Mechanical Test TechnicianCreedmoor, North CarolinaDeep firsthand knowledge of manufacturing operations, the ability to provide real time shop support with solid troubleshooting skills leading to consistent production and quality. Minimum educational and work experience requirements for the successful candidate will include the following: Associates degree in electronics field or equivalent military training required.
Test Technician I - 1st Shift (Onsite) RTXTest Technician I - 1st Shift (Onsite)Wilson, North CarolinaNot Required At RTX, the world's largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management.
Generator Field Technician (Commercial, Electrical Controls, Mechanical, Microgrid) PowerSecure, Inc.Generator Field Technician (Commercial, Electrical Controls, Mechanical, Microgrid)Charlotte, NCPart timeLevel IV Technician requires ten years of field experience servicing generator systems of all sizes and applications, expert in preventative maintenance, paralleling switch gear, retrofitting advanced controls and Loadbanking equipment. Physical Activity: 85% physical activity required on customer site working with equipment, 15% form completion, email, other administrative tasks and completing technical support activities by way of telephone and computer communication.
NewService Technician in Bayboro, North Carolina | Careers at Bayboro, NC UNAVAILABLEService Technician in Bayboro, North Carolina | Careers at Bayboro, NCBayboro, NCHeadquartered in Whippany, New Jersey, Suburban Propane has been in the customer service business since 1928 and is a nationwide distributor of propane, renewable propane, renewable natural gas ("RNG"), fuel oil and related products and services, as well as a marketer of natural gas and electricity and producer of and investor in low carbon fuel alternatives, servicing the energy needs of approximately 1 million residential, commercial, governmental, industrial and agricultural customers through approximately 700 locations across 42 states. To operate our company vehicles, you must have a minimum of a Class B Commercial Driver’s License (CDL) with HAZMAT, tanker, and air brake endorsements as well as a valid Medical Examiner’s Certificate allowing for operation in interstate commerce.
Service Technician in Brevard, North Carolina | Careers at Brevard, NC UNAVAILABLEService Technician in Brevard, North Carolina | Careers at Brevard, NCBrevard, NCHeadquartered in Whippany, New Jersey, Suburban Propane has been in the customer service business since 1928 and is a nationwide distributor of propane, renewable propane, renewable natural gas ("RNG"), fuel oil and related products and services, as well as a marketer of natural gas and electricity and producer of and investor in low carbon fuel alternatives, servicing the energy needs of approximately 1 million residential, commercial, governmental, industrial and agricultural customers through approximately 700 locations across 42 states. To operate our company vehicles, you must have a minimum of a Class B Commercial Driver’s License (CDL) with HAZMAT, tanker, and air brake endorsements as well as a valid Medical Examiner’s Certificate allowing for operation in interstate commerce.
Electro/Mechanical Test Technician Ontic Engineering and Manufacturing IncElectro/Mechanical Test TechnicianNCWe are looking for a candidate with the following experience/qualifications: Minimum educational and work experience requirements for the successful candidate will include the following: Associates degree in electronics field or equivalent military training required. Deep firsthand knowledge of manufacturing operations, the ability to provide real time shop support with solid troubleshooting skills leading to consistent production and quality.
MANUFACTURING TECHNICIAN I TE Connectivity plcMANUFACTURING TECHNICIAN INC$41,200–$51,400 / yearAs a trusted innovation partner, our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, energy networks, automated factories, data centers enabling artificial intelligence, and more. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com.
Electrician - 100 Percent Travel Required Parsons CorpElectrician - 100 Percent Travel RequiredNC$35.96–$62.93 / hourVoICE will provide voice communications services to Air Traffic Control Specialists (ATCS), supervisors, and ancillary Air Traffic Control (ATC) operators in support of 24x7 ATC operations in the Terminal and En Route domains of the National Airspace System (NAS). FAA Air Traffic Control (ATC) specialists use voice communications as their primary means of communications for the purpose of controlling airspace for the safe and efficient movement of aircraft in the National Airspace System (NAS).