Advanced Electrical Design Engineer Honeywell Aerospace Inc.Advanced Electrical Design EngineerRedmond, WA$106,000–$130,000 / yearOur new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution.
Electrical & Instrumentation (E&I) Maintenance and Reliability Engineer Qnity ElectronicsElectrical & Instrumentation (E&I) Maintenance and Reliability EngineerBellevue, WashingtonThe Electrical & Instrumentation Maintenance and Reliability Engineer is the site’s technical authority for electrical systems, responsible for improving reliability, ensuring safety compliance, and leading modernization of aging infrastructure across the Newark facility. At Qnity , we’re more than a global leader in materials and solutions for advanced electronics and high-tech industries – we’re a tight-knit team that is motivated by new possibilities, and always up for a challenge.
NewElectrical On-orbit Reliability Engineer, Satellites (Starlink) SpaceXElectrical On-orbit Reliability Engineer, Satellites (Starlink)Redmond, WA$105,000–$145,000 / yearExperience with PCBA test equipment and measurement techniques (oscilloscope, multimeter, electronic load, spectrum analyzer, network analyzer, vector signal generator, source measurement unit, etc.). To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Electrical Design Engineer (Starlink Mobile) SpaceXElectrical Design Engineer (Starlink Mobile)Redmond, WA$105,000–$120,000 / year2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. 2+ years of electronic product experience designing hardware from concept through production; strong emphasis on full life-cycle development of new hardware products and not small incremental updates to legacy hardware.
NewElectrical Design Engineer (Starlink Mobile) Space Exploration TechnologiesElectrical Design Engineer (Starlink Mobile)Redmond, WA$105,000–$120,000 / year2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Rolling Stock Electrical Services Senior/Principal Consultant AtkinsRealisRolling Stock Electrical Services Senior/Principal ConsultantBothell, WA$130,000–$216,000 / yearWe are seeking a Rolling Stock Electrical Services Senior/Principal Consultant to join our team in Los Angeles, CA to provide high quality rolling stock consultancy services to clients primarily in the field of electrical systems, such as vehicle control circuits, propulsion and traction control, auxiliary power/battery, EMI/EMC, software, lighting, high voltage collection and distribution, communication systems, monitoring & diagnostics, and/or other rail vehicle electrical systems across of a variety of vehicle types, including commuter rail, streetcars, light rail, locomotives, and metro vehicles. AtkinsRéalis believes that conviction records may have a direct, adverse, and negative relationship to the following job duties: accessing company property, information, assets, and products; accessing confidential information and partnering and regularly working with or supervising other AtkinsRéalis employees and interacting with AtkinsRéalis clients including government property or ports.
Electrical Designer, Power & Industrial AtkinsRealisElectrical Designer, Power & IndustrialBothell, WA$40–$60 / hourBachelor's degree in Engineering, Architecture, or an equivalent technical discipline plus a minimum of five (5) years of relevant experience; or Associate's degree plus a minimum of twelve (12) years of progressive drafting and design experience, including at least four (4) years in a Designer role; or High School diploma (or equivalent) plus a minimum of fifteen (15) years of progressive drafting and design experience, including at least seven (7) years in a Designer role. Note to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency.
Senior Electrical Test Engineer Andrews Cooper Technology LLCSenior Electrical Test EngineerRedmond, WARemote$104,000–$175,000 / yearSENIOR ELECTRICAL TEST ENGINEER IN REDMOND, WA At Andrews Cooper, we specialize in delivering cutting-edge engineering solutions in the HardTech space, partnering with industry leaders in Consumer Technology, Medical Technology, Clean Technology, and Automation & Robotics. This is a full-time position with compensation, benefits, and work positives, including: Medical, dental, life, and disability insurance; health savings accounts (HSA), flexible spending accounts (FSA), employee assistance programs (EAP), and dependent savings accounts (DSA).
NewWS - Electrical Test Engineer - Mar 2020 Keltia Design IncWS - Electrical Test Engineer - Mar 2020Redmond, WAOur client in the Seattle area is a part of a leading design and manufacturer of aerospace products and is looking for a Electrical Test & Calibration Engineer. Design and build fully automated test systems to support ATP and QTP testing of aerospace parts.
Hardware Engineer - Electrical, Satellites (Starlink) SpaceXHardware Engineer - Electrical, Satellites (Starlink)Redmond, WA$105,000–$122,500 / year2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include: Avionics : The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!
Electrical Hardware Engineer, Satellites (Starlink) SpaceXElectrical Hardware Engineer, Satellites (Starlink)Redmond, WA$105,000–$122,500 / year2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include: Avionics : The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!
Electrical Test and Reliability Engineer, Satellites (Starlink) SpaceXElectrical Test and Reliability Engineer, Satellites (Starlink)Redmond, WA$105,000–$145,000 / yearThese teams work with a wide range of technical disciplines including high-speed digital communication, network system integration, power systems integration, RF systems, avionics, network computers, power electronics, failure analysis, on-orbit reliability, and testing automation. As an Electrical Test and Reliability Engineer on Starlink, you’ll sit at the intersection of electrical, mechanical, thermal analysis, software, and antenna engineering - ultimately ensuring that our satellite hardware can withstand the harsh environment of space and maintain communication with millions of users on a global scale.
Hardware Engineer - Electrical, Satellites (Starlink) Space Exploration TechnologiesHardware Engineer - Electrical, Satellites (Starlink)Redmond, WA$105,000–$122,500 / year2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include: Avionics: The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!
New Graduate Engineer, Electrical - '26/'27 (Starlink) SpaceXNew Graduate Engineer, Electrical - '26/'27 (Starlink)Redmond, WA$105,000–$145,000 / yearExperience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, RF/mm, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include, but are not limited to: Avionics: The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!
Sr. Electrical Design Engineer, Satellites (Starlink) SpaceXSr. Electrical Design Engineer, Satellites (Starlink)Redmond, WA$140,000–$235,000 / year2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include: Avionics : The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!
NewElectrical Test And Reliability Engineer, Satellites (Starlink) Space Exploration TechnologiesElectrical Test And Reliability Engineer, Satellites (Starlink)Redmond, WA$105,000–$145,000 / yearThese teams work with a wide range of technical disciplines including high-speed digital communication, network system integration, power systems integration, RF systems, avionics, network computers, power electronics, failure analysis, on-orbit reliability, and testing automation. As an Electrical Test and Reliability Engineer on Starlink, you'll sit at the intersection of electrical, mechanical, thermal analysis, software, and antenna engineering - ultimately ensuring that our satellite hardware can withstand the harsh environment of space and maintain communication with millions of users on a global scale.
NewSr. Electrical Design Engineer, Satellites (Starlink) Space Exploration TechnologiesSr. Electrical Design Engineer, Satellites (Starlink)Redmond, WA$140,000–$235,000 / year2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include: Avionics: The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!
NewNew Graduate Engineer, Electrical - '26/'27 (Starlink) Space Exploration TechnologiesNew Graduate Engineer, Electrical - '26/'27 (Starlink)Redmond, WA$105,000–$145,000 / yearExperience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, RF/mm, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include, but are not limited to: Avionics: The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!
NewElectrical Hardware Engineer, Satellites (Starlink) Space Exploration TechnologiesElectrical Hardware Engineer, Satellites (Starlink)Redmond, WA$105,000–$122,500 / year2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components. Sub-teams include: Avionics: The backbone of Starlink satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user traffic, and connect satellites to each other via our state-of-the-art Space Lasers!
Electrical Engineer Davis Wire CorporationElectrical EngineerKent, WA$120,000–$160,000 / yearPart timeHistorically talented at restoring distressed companies, Heico strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services. The employee is occasionally required to use hands to finger, handle or feel and reach with hands and arms, lift and/or carry up to 50 pounds, balance, bend, stoop or kneel, climb, push/pull and squat, or crouch.