58 Results for

Weekend Engineering Jobs in Westwood Village, WA

Jobs

Seattle, WA17 days ago

$50–$53.03 Per Hour
Full-time
Employee

The primary focus of the Assistant Scientist will be to support testing and implementation of operational improvements and resolve manufacturing process investigations at the Client cell therapy GMP manufacturing facilities. BS degree with minimum of 2 years of relevant experience, or MS degree with minimum 0 years of relevant experience in biologic process / analytical development or commercial biologic manufacturing process support.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Hands on experience in hardware manufacturing (i.e. tight tolerance assembly, leak testing, final acceptance testing of integrated hardware, and castings, forgings, additively manufactured components, welding, machining, cleaning, non-destructive testing methods, Manufacturing Execution Systems/Software).

Renton, WA30+ days ago

Full-time
Employee

Coordinate and communicate production activities with external customers and internal departments including logistics, engineering, and production management (to include management on other shifts). With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.

Renton, WA30+ days ago

Full-time
Employee

Prepare machine by reviewing work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). Competent in basic math and algebra; using all units of measure, whole numbers, common fractions, and decimals; computing rate, ratio, and percent; drawing and interpreting bar graphs.

Renton, WA24 days ago

Full-time
Employee

E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.

Renton, WA24 days ago

Full-time
Employee

E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. seeking professionals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of production for our Laminator I - weekend shift position at our Renton, WA facility.

Renton, WA24 days ago

Full-time
Employee

The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.

Times Square, WA30+ days ago

Full-time
Employee

High school diploma or general education degree (GED) (required) and two (2) years of applicable experience (preferred); or an Associate degree or equivalent from a two-year college; or a Bachelor's degree in science, construction management, engineering, physical science, environmental science, or related subjects; or equivalent combination of education, experience and training that provides the required knowledge, skills, Technical experience in construction services, geotechnical, environmental, or related engineering disciplines. The role will assist with sample collection of a wide range of media including, but not limited to, soil, sediment, water, and air for environmental testing; conduct water quality sampling for discharge permit compliance and environmental remediation projects; provide comprehensive documentation of all field-related activities to senior level project personnel; and provide additional field and office support to project managers for a diverse private and public sector client base.

New!

Redmond, WA2 days ago

Temporary
Contractor
Full-time

In terms of professional development, Everforth Apex hosts an on-demand training program, provides access to certification prep and a library of technical and leadership courses/books/seminars once you have 6+ months of tenure, and certification discounts and other perks to associations that include CompTIA and IIBA. Everforth Apex also offers a HSA (Health Savings Account on the HDHP plan), a SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions, a corporate discount savings program and other discounts.

Tacoma, WA13 days ago

Full-time
Employee

The position is responsible for the management and oversight of all aspects of vessel maintenance and repair (M&R) of the vessels, including safety, financial, accounting, engineering, and personnel management, including the following: Operational Management. The Vessel Engineering Manager provides strategic leadership to the engineering team, ensuring vessel schedule integrity, regulatory compliance, and cost effective maintenance operations.

New!

Sumner, WA2 days ago

$30–$40 Per Hour
Full-time
Employee

How You’ll Make an Impact: As a Machinist, you will play a key role in producing precision aerospace and defense components by performing machine setups, selecting tooling, loading programs, and ensuring parts meet engineering and quality specifications. About Automatic Products:Automatic Products is a growing precision machine shop in Sumner, Washington, proudly serving aerospace, space, automotive, electronics, and commercial industries for over 40 years.

Seattle, WA28 days ago

$111,400–$148,533.35 Per Year
Full-time
Employee

The cost team delivers solutions to clients in the areas of conceptual estimating, budget development, cost planning, feasibility studies, value management, economic forecasting, milestone reports, pre- and post-contract auditing, change order review and reconciliation, BIM 5D cost modeling, LEED cost analysis, life cycle costing, and more. To this end, Cumming Group complies with all provisions of Title VII of the Civil Rights Act of 1964 as amended, all of the rules, regulations and relevant orders of the Secretary of Labor, and all similar state and local laws.

Seattle, WA30+ days ago

As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Provide technical guidance to manufacturing personnel regarding approved repair methods and engineering requirements.

Seattle, WA30+ days ago

As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. 2 or more years of experience supporting MRB (Material Review Board) activities related to aircraft systems or structures (Experienced level).

Seattle, WA11 days ago

$40–$65 Per Hour

FireProtectionEngineer #IndustrialSafety We're seeking an Industrial Fire Protection Engineer to play a vital role in developing and implementing fire protection strategies for industrial facilities, ensuring the safety of personnel, equipment, and assets. + Collaborate with consultants, architects, engineers, and facility managers to integrate fire protection systems seamlessly into project design and construction phases.

Kirkland, WA30+ days ago

$37.73–$56.60 Per Hour

Demonstrates proficiency (typically 4-6 years of direct experience in the duties and responsibilities of the position) **Technical Skills:** + Advanced Electrical/electronic circuit/component knowledge + Intermediate knowledge of computer SW and operating systems + Aerospace equipment test experience, such as DO-160 testing, preferred + Aptitude in aircraft power electronics testing and troubleshooting, especially DO-160 qualification testing + Experience in board level testing and component level troubleshooting, repair, and rework + Experience in using computer based tools and procedures to perform, document and track testing + Proficiencey to assemble, test and debug test fixtures utilizing formal and informal test procedures + Ability to work in a fast paced, team structured environment and support extended business hours or weekends, as required. + Aptitude to coordinate work effort with other groups as required + Skill to coordinate with minimal supervision and high personal initiative + Capacity to provide excellent project team support by completing tasks on time + Talent for activelyly supporting company processes and procedures such as Safety, ESD, procurement and calibration of lab equipment + Expertise to troubleshoot and fix switched mode power electronic circuitry down to the component level **Physical Abilities:** + Manual dexterity + Occasionally lift heavy (< 40 lbs.) items + Color differentiation **Work Environment:** + Exposure to high voltage + Exposure to power tools + Exposure to chemicals + Moderate noise environment **EMPLOYMENT ELIGIBILITY REQUIREMENTS:** + As a US Department of Defense Contractor, this position may involve access to items subject to U.S. export-control laws.

Gig Harbor, WA30+ days ago

$140,951–$176,586 Per Year

Working/general knowledge on any of the existing PLC current applications will be required and include, but are not limited to: ESRI, AutoCAD, NISC, Microsoft Report Server, Milsoft IVR/OMS/Engineering Analysis, Survalent ADMS/OMS, Schweitzer Engineering Laboratories (SEL) TEAMS/AcSELerator for relay configuration and management, Tableau, Verizon Grid Wide/Aclara metering. Day to day responsibilities include assigning work, ensuring coordination and cooperation on the flow of work between the all-business Departments, short-and long-range utility system planning, resource estimates and Warehouse inventory support, employee training and development, and on-site review of construction as needed.

Redmond, WA30+ days ago

$122,500–$145,000 Per Year

PREferred SKILLS AND EXPERIENCE: Masters degree or PhD in electrical engineering or computer engineering with an emphasis in electro-optics integrated circuit design Experience using simulation tools such as Spectre, ADS, HFSS or Momentum, Ansys Lumerical, COMSOL Photonics design skills, and experience performing analysis and simulation of optical building blocks such as MZM and Microring modulators, Ge Photo diodes, dWDM filters, waveguides, couplers, dividers and polarization management circuitry Electrical circuit design skills, and experience performing analysis and simulation of both linear and non-linear circuits such as high bandwidth modulator drivers, TIAs, CTLEs, filters, low noise and power amplifiers Knowledge of advanced packaging technology for optical engine integration in a co-package optics (CPO) solution Experience working on wideband circuit designs supporting high speed Serdes links with more than 100Gbps data rate and BW exceeding 10s of GHz Familiarity with high speed SerDes architecture, modulation schemes such as NRZ and PAM4 and link protocols Familiarity with optical and radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generators, high speed oscilloscopes and BERTs Experience characterizing EIC/PIC performance for high speed optical Serdes. RESPONSIBILITIES: Design, simulate and model electro-optical building blocks for a silicon photonics solution Design, simulate and model RF/analog/mixed signal circuits and systems Derive specifications for the Photonics IC/Electrical IC subsystems and circuits Develop Analog/Mixed-Signal/RF/Microwave circuits in SiGe or CMOS processes Work with system architects, DSP and electro-optics, and ASIC engineers to partition functions between hardware and software domains Perform IC floor planning and layout Model package and external parasitic components Evaluate, characterize and measure electrical and optical building blocks of a high-speed optical link solution Assist in the development of automated test lab equipment for lab measurements Work with manufacturing engineers on production testing and qualification of the EIC/PIC components and systems.

New!

SEATTLE, WA2 days ago

$44.20–$45.08 Per Hour

_As a_ Great Place to Work in the U.S. (https://www.greatplacetowork.com/certified-company/1000120) _for thirteen years running, Hyatt is an award-winning culture where you can bring your whole self to work every day, coupled with benefits that empower you to defy expectations and seek excellence._ _The Engineering Supervisor will be responsible for providing leadership support for the second shift engineerig team, across our three-hotel collection: Hyatt Regency Seattle, Hyatt at Olive 8, Grand Hyatt Seattle. This leader must possess strong trouble-shooting skills in all areas of maintenance in guest rooms, meeting space, and front of the house areas, as well as back of house areas including kitchen, laundry, electrical, mechanical and HVAC systems, using a windows based computer system.

Redmond, WA23 days ago

These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license.** A Career That Takes Off.** PDS Tech Commercial is partnering with a leading aerospace manufacturer to hire detail-driven **Assemblers** who are ready to play a hands-on role in producing high-quality aerospace components.

Bellevue, WA7 days ago

USA, CA, San Francisco - 84,300.00 - 126,400.00 USD annually USA, MA, Boston - 76,600.00 - 114,900.00 USD annually USA, NY, New York - 84,300.00 - 126,400.00 USD annually USA, TN, Nashville - 68,900.00 - 103,400.00 USD annually USA, TX, Austin - 76,600.00 - 114,900.00 USD annually USA, TX, Houston - 76,600.00 - 114,900.00 USD annually USA, TX, Irving - 76,600.00 - 114,900.00 USD annually USA, VA, Arlington - 76,600.00 - 114,900.00 USD annually USA, WA, Bellevue - 82,700.00 - 114,900.00 USD annually Daily tasks may comprise of site coordination with operations teams and contractors on project execution activities or changes; deep diving project progress, schedule and resources, while identifying barriers, creating solutions and driving resolutions.

Redmond, WA30+ days ago

$44–$54 Per Hour

Working directly in the Failure Analysis laboratory, this position will support the analysis of failures observed in production, determine the quality of the manufacturing process, and support investigations into nonconforming product. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. \u00a7 1157, or (iv) Asylee under 8 U.S.C. \u00a7 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Seattle, WA30+ days ago

$46.35–$62.60 Per Hour

QUALIFICATIONS * Experience reading engineering drawings, manuals and schematics * Supervisory experience * High school diploma or equivalent * 7+ years proven refrigeration/HVAC experience and satisfactory overall performance * EPA Type 2 Certification * Basic knowledge of Microsoft Office * Advanced technical training or related technical certifications * Ability to use and instruct others in the use of control manufacturer software * Must hold and maintain a valid drivers license * Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary * Demonstrated mentoring and training experience $46.35 - $62.60 per hour * Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store.

Seattle, WA30+ days ago

$41.10–$55.25 Per Hour

QUALIFICATIONS * Experience reading engineering drawings, manuals and schematics * Advanced technical training or related technical certifications * Supervisory experience * High school diploma or equivalent * 57 years proven refrigeration/HVAC experience and satisfactory overall performance * EPA Type 2 Certification * Basic knowledge of Microsoft Office * Ability to use control manufacturers software * Must hold and maintain a valid drivers license * Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary * Demonstrated mentoring and training experience $41.10 - $55.25 per hour * Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store.

Seattle, WA30+ days ago

$36.20–$48.85 Per Hour

QUALIFICATIONS Desired Previous Job Experience/Education: * Experience reading engineering drawings, manuals and schematics * Supervisory experience Minimum Position Qualifications & Education Requirements: * High school diploma or equivalent * 35 years proven refrigeration/HVAC experience and satisfactory overall performance * EPA Type 2 Certification * Basic knowledge of Microsoft Office * Ability to use control manufacturers software * Must hold and maintain a valid drivers license * Ability to work a flexible schedule, including nights, weekends, holidays and overtime when necessary $36.20 - $48.85 per hour * Physical demands include, but are not limited to, high aptitude for standing and walking endurance, sitting while driving to various stores, lifting and carrying up to 70 pounds, pushing and pulling climbing ladders of various types, bending, squatting, and kneeling, and working in different temperatures inside and outside the store.

New!

Joint Base Lewis McChord, WA3 days ago

Carrying, lifting, pushing and/or pulling items weighing up to 100-300 pounds + Frequently standing up and moving about the facility + Frequently handling objects and equipment to maintain the facility + Frequently bending, stooping, kneeling, climbing and crawling **Preferred Qualifications** + Expertise in plumbing, electrical, mechanical, carpentry and related certifications (including Level 3 EPA, HVAC/refrigeration, licensed plumber, or journeyman status) are preferred but not required + Communication skills are utilized a significant amount of time when interacting with the other supervisors, hotel staff and hotel guests. - to ensure repeat business, follow up on events, and generate new business + Self-motivator who can manage the responsibilities of the department without daily supervision + Represent the hotel with a positive attitude and professional attire + Follow sustainability guidelines and practices related to IHG and InterContinental Boston sustainability programs + Carry out any other duties which fall within the broad spirit, scope and purpose of this job description and which are commensurate with the role + Responsible for practicing, managing, and promoting the company's values so that it becomes and intricate part of the everyday operation.

Seattle, WA18 days ago

Strong leadership and organizational skills with the ability to navigate a large, matrixed institution and industry partners + Excellent communication and relationship-building skills to engage faculty, donors, and institutional leaders and funding agencies + Sufficient science and engineering background and understanding for effective communication and excellent writing skills **DESIRED QUALIFICATIONS** + Seven to ten years of experience specific to the position. + Work both independently and in partnership with Advancement staff, on development of campaign priorities and messaging; prospect strategy; participate in the planning of campaign/donor events; attend multiple planning meetings with Advancement staff; participate in campaign committee meetings and meetings with prospects/potential donors.

Federal Way, WA7 days ago

$110,000–$140,000 Per Year

Qualifications** - Experience with temporary structures and/or construction engineering - Accredited Bachelor of Science degree in Civil or Structural Engineering; Master's degree or greater in Structural Engineering is preferred - 10+ years of relevant engineering experience - Professional Engineer licensure or eligibility within the United States - Strong all-around academic knowledge of structural engineering - Experience with engineering design software will be an advantage; this includes AutoCAD, BlueBeam, MathCAD, Navisworks, RISA-3D etc. - May work at various different locations and conditions may vary Base Compensation: $110,000 - $140,000 (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off.

Bellevue, WA30+ days ago

Hands-on experience with cameras, sensors, embedded/edge computing platforms, or IIoT systems Preferred Qualifications - Experience with complex automated material handling equipment, packaging technologies, and systems and high-speed manufacturing - Experience in creating products and services with hardware and software integrated - Experience building complex software systems, especially involving deep learning, machine learning and computer vision, that have been successfully delivered to customers - Experience in embedded wireless systems, or experience in developing and deploying LLMs in production on GPUs, Neuron, TPU or other AI acceleration hardware - 5+ years of hardware design and validation of components, subsystems and systems experience - Experience owning end-to-end programs to drive results - Master's or PhD in mechanical, Industrial Engineering, Operations, or a related STEM field. This role focuses on advancing physical AI and autonomous systems, including SLAM-based navigation, localization, and autonomous decision-making in real-world environments The ideal candidate is a hands-on interdisciplinary engineer with expertise spanning hardware systems or embedded/edge computing, and automation environments, capable of bridging the gap between science (AI/ML models) and real-world deployment in industrial settings.

Redmond, WA21 days ago

$122,500–$145,000 Per Year

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RF SILICON SOFTWARE ENGINEER (RFIC Engineering) At SpaceX we're leveraging our experience in building rockets and spacecraft to deploy Starlink, the world's most advanced broadband internet system.

Redmond, WA14 days ago

$125,000–$145,000 Per Year

RESPONSIBILITIES: + Design ASICs and/or FPGAs for Starlink projects, implementing complex SoC blocks and SoC integration tasks using Verilog/SystemVerilog + Optimize designs for power, performance and area + Participate in the full ASIC/FPGA design lifecycle for Starlink projects, from high-level conceptual and architectural discussions through microarchitecture, design partitioning, and collaboration with backend/implementation teams, and assist in lab bring-up and validation + Contribute to continual improvements to our designs by building physical and digital tools to analyze data collected on orbit and in the lab + Engage in high-level architectural design for test systems to support FPGA/ASIC validation, generational interoperability, and integration with DSP/communications subsystems for comprehensive lab and on-orbit verification. + Collaborate with software engineers in developing production software for your designs BASIC QUALIFICATIONS: + Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or Physics + 1+ years of experience in RTL Design using SystemVerilog, Verilog or VHDL PREFERRED SKILLS AND EXPERIENCE: + ASIC/FPGA system integration experience + Proficiency in Python, C/C++, and Bash + Experience in designing DSP, digital communication system datapath blocks, and/or modem design + Experience with EDA tools such as HDL simulators (e.g.

New!

Bellevue, WA6 days ago

Create and update the wireless network design to improve reliability - Mitigate and Solve Network Availability Risks - Partner with peer networking teams on overall network design to provide feedback and improvements from the wireless network perspective. Description OpsTech IT Wireless and Access Engineering owns delivering software-defined, automated, and incrementally scalable Wireless/Access network infrastructure products that improve the reliability of our wireless services for Amazon's fulfillment centers and transportation sites, worldwide.

Redmond, WA14 days ago

$160,000–$225,000 Per Year

ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We are seeking a motivated, proactive, and intellectually curious engineer who will work alongside world-class cross-disciplinary teams (systems, firmware, architecture, design, validation, product engineering, ASIC implementation).

Redmond, WA21 days ago

$160,000–$225,000 Per Year

RESPONSIBILITIES: + Design, analyze, and simulate optical building blocks such as MZM and Microring modulators, Ge Photo diodes, dWDM filters, waveguides, couplers, dividers and polarization management circuitry in different integrated platforms such as silicon photonics and InGaAs/InP + Derive specifications for the Photonics IC systems and circuits + Design and model package optical interface including edge coupler and grating couplers + Familiar with RF, Analog and mixed signal circuits + Work with system architects, DSP, electro-optics, and ASIC engineers to partition functions between hardware and software domains + Perform IC floor planning and layout + Evaluate, characterize and measure electrical and optical building blocks of a high-speed optical link solution + Assist in the development of automated test lab equipment for lab measurements + Work with manufacturing engineers on production testing and qualification of the PIC circuits and systems + Experience using simulation tools such as Lumerical, COMSOL and HFSS BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 5+ years of photonics or electro-optical integrated circuit design PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in electrical engineering, computer engineering (with emphasis on electro-optics IC design), or applied physics + Experience using electrical simulation tools such as Spectre, ADS + Knowledge of advanced packaging for a co-package optics (CPO) solution + Electrical circuit design skills, and experience performing analysis and simulation linear/non-linear circuits such as high bandwidth modulator drivers, TIAs, CTLEs, filters, low noise and power amplifiers. + Experience working on wideband circuit designs supporting high speed Serdes links with more than 100Gbps data rate and BW exceeding 10s of GHz + Familiarity with high speed SerDes architecture and modulation schemes such as NRZ/ PAM4 and link protocols + Familiarity with optical and radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generators, high speed oscilloscopes and BERTs + Experience characterizing EIC/PIC performance for high speed optical Serdes ADDITIONAL REQUIREMENTS:?

Redmond, WA21 days ago

$160,000–$225,000 Per Year

RESPONSIBILITIES: + Design, simulate and model electro-optical building blocks for a silicon photonics solution + Design, simulate and model RF/analog/mixed signal circuits and systems + Derive specifications for the Photonics IC/Electrical IC subsystems and circuits + Develop Analog/Mixed-Signal/RF/Microwave circuits in SiGe or CMOS processes + Work with system architects, DSP and electro-optics, and ASIC engineers to partition functions between hardware and software domains + Perform IC floor planning and layout + Model package and external parasitic components + Evaluate, characterize and measure electrical and optical building blocks of a high-speed optical link solution + Assist in the development of automated test lab equipment for lab measurements + Work with manufacturing engineers on production testing and qualification of the EIC/PIC components and systems BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 5+ years of photonics or electro-optical integrated circuit design PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in electrical engineering or computer engineering with an emphasis in electro-optics integrated circuit design + Experience using simulation tools such as Spectre, ADS, HFSS or Momentum, Ansys Lumerical, COMSOL + Photonics design skills, and experience performing analysis and simulation of optical building blocks such as MZM and Microring modulators, Ge Photo diodes, dWDM filters, waveguides, couplers, dividers and polarization management circuitry + Electrical circuit design skills, and experience performing analysis and simulation of both linear and non-linear circuits such as high bandwidth modulator drivers, TIAs, CTLEs, filters, low noise and power amplifiers. + Knowledge of advanced packaging technology for optical engine integration in a co-package optics (CPO) solution + Experience working on wideband circuit designs supporting high speed Serdes links with more than 100Gbps data rate and BW exceeding 10s of GHz + Familiarity with high speed SerDes architecture, modulation schemes such as NRZ and PAM4 and link protocols + Familiarity with optical and radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generators, high speed oscilloscopes and BERTs + Experience characterizing EIC/PIC performance for high speed optical Serdes ADDITIONAL REQUIREMENTS:?

Redmond, WA21 days ago

$125,000–$145,000 Per Year

RESPONSIBILITIES: + Design, analyze and simulate optical building blocks such as MZM and Microring modulators, Ge Photo diodes, dWDM filters, waveguides, couplers, dividers and polarization management circuitry in different integrated platforms such as silicon photonics and InGaAs/InP + Derive specifications for the Photonics IC systems and circuits + Design and model package optical interface including edge coupler and grating couplers + Familiar with RF, Analog and mixed signal circuits + Work with system architects, DSP, electro-optics, and ASIC engineers to partition functions between hardware and software domains + Perform IC floor planning and layout + Evaluate, characterize and measure electrical and optical building blocks of a high-speed optical link solution + Assist in the development of automated test lab equipment for lab measurements + Work with manufacturing engineers on production testing and qualification of the PIC circuits and systems + Experience using simulation tools such as Lumerical, COMSOL and HFSS BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 2+ years of photonics or electro-optical integrated circuit design PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in electrical engineering, computer engineering (with emphasis on electro-optics IC design), or applied physics + Experience using electrical simulation tools such as Spectre, ADS + Knowledge of advanced packaging for a co-package optics (CPO) solution + Electrical circuit design skills, and experience performing analysis and simulation linear/non-linear circuits such as high bandwidth modulator drivers, TIAs, CTLEs, filters, low noise and power amplifiers. + Experience working on wideband circuit designs supporting high speed Serdes links with more than 100Gbps data rate and BW exceeding 10s of GHz + Familiarity with high speed SerDes architecture and modulation schemes such as NRZ/ PAM4 and link protocols + Familiarity with optical and radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generators, high speed oscilloscopes and BERTs + Experience characterizing EIC/PIC performance for high speed optical Serdes ADDITIONAL REQUIREMENTS:?

Redmond, WA14 days ago

$210,000–$300,000 Per Year

RESPONSIBILITIES: + Responsible for digital ASIC and/or FPGA verification at block and system level + Lead and execute verification test plan, development, and milestones from beginning to end + Contribute towards pre-silicon verification, chip bring-up and post-silicon validation + Be a hands-on self-starter who can execute the steps required to fully verify a complex digital designs BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 10+ years of experience with design verification and test bench development + 10+ years of experience with design verification and test bench development PREFERRED SKILLS AND EXPERIENCE: + Advanced degree in electrical engineering or computer engineering + Experience with verification methodologies such as UVM/OVM/VMM + Strong object-oriented programming knowledge + Strong problem-solving and coding skills + Experience in constrained random verification + Expertise in developing test plans, implementing coverage models, and analyzing results + Experience with scripting languages, e.g. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA14 days ago

$125,000–$145,000 Per Year

RESPONSIBILITIES: + Responsible for digital ASIC verification at block and system level + Write and review test plans, develop test harnesses and test sequences + Develop SystemVerilog testbench infrastructure (both UVM and non-UVM) for testing designs, including DSP blocks + Responsible for test plan execution, running regressions, code and functional coverage closure + Automate test case generation by using Python and MATLAB programs + Contribute towards pre-silicon verification, chip bring-up and post-silicon validation + Be a hands-on self-starter who can execute the steps required to fully verify a complex digital designs BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer science or computer engineering + 1+ years of experience with design verification and test bench development PREFERRED SKILLS AND EXPERIENCE: + Advanced degree in electrical engineering or computer engineering + Experience with verification methodologies such as UVM + Strong object-oriented programming knowledge + Strong problem-solving and coding skills + Experience in constrained random verification + Expertise in developing test plans, implementing coverage models, and analyzing results + Experience with scripting languages, e.g. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA14 days ago

$165,000–$230,000 Per Year

RESPONSIBILITIES: + Responsible for digital ASIC verification at block and system level + Write and review test plans, develop test harnesses and test sequences + Responsible for test plan execution, running regressions, code and functional coverage closure + Contribute towards pre-silicon verification, chip bring-up and post-silicon validation + Be a hands-on self-starter who can execute the steps required to fully verify a complex digital designs BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering or computer engineering + 5+ years of experience with design verification and test bench development PREFERRED SKILLS AND EXPERIENCE: + Advanced degree in electrical engineering or computer engineering + Experience with verification methodologies such as UVM/OVM/VMM + Strong object-oriented programming knowledge + Strong problem-solving and coding skills + Experience in constrained random verification + Expertise in developing test plans, implementing coverage models, and analyzing results + Experience with scripting languages, e.g. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$160,000–$225,000 Per Year

RESPONSIBILITIES: + Design and develop RF front-end MCMs for 5G NR, LTE, and Wi-Fi applications + Integrate RFICs (PAs, LNAs, switches), power management ICs, BAW/SAW filters, printed passives, and SMDs into compact MCMs + Design custom passives (inductors, couplers, etc.) printed into module laminates + Specify RFIC and BAW filter performances; define pin-to-pin lineups, linearity performances, and coupling specifications of RF modules + Work closely with BAW filter designers, RFIC designers, and package/layout engineers in module floor-planning + Perform detailed circuit and EM simulations, and co-simulation of the full module with sub-components + Conduct lab bring-up, characterization, and debugging of module prototypes; drive learnings into improving and optimizing subsequent prototype iterations + Manage laminate and assembly suppliers + Develop ATE test plans and coordinate with OSAT teams on implementation + Support the integration of RF modules into production PCBAs + Perform yield analysis and implement design improvements for high-volume production BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 5+ years of research and/or industry experience in RF/Microwave engineering or RFIC engineering PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in an engineering discipline with emphasis in RF/microwave circuits/systems, BAW/SAW resonators, advanced semiconductor packaging, or electromagnetic theory + Experience in designing multi-chip RF modules for cellular or Wi-Fi applications + Familiar with MCM substrate/packaging technologies (e.g. double-sided BGA), and manufacturing processes + BAW filter design experience + Thorough understanding of RF passive components and EM principles + Experience in the design of linear and non-linear circuits such as power amplifiers, low noise amplifiers, mixers, filters and PLLs + Module/RF/microwave design using ADS, HFSS, AWR (or similar tools) + Experience in MATLAB, Python or equivalent tools for modeling and analyzing RF systems + Familiar with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generator, network analyzers + Experience characterizing radio performance for cellular and Wi-Fi systems + Python programming experience for test automation ADDITIONAL REQUIREMENTS:?

Redmond, WA30+ days ago

$125,000–$145,000 Per Year

RESPONSIBILITIES: + Design, simulate and model electro-optical building blocks for a silicon photonics solution + Design, simulate and model RF/analog/mixed signal circuits and systems + Derive specifications for the Photonics IC/Electrical IC subsystems and circuits + Develop Analog/Mixed-Signal/RF/Microwave circuits in SiGe or CMOS processes + Work with system architects, DSP and electro-optics, and ASIC engineers to partition functions between hardware and software domains + Perform IC floor planning and layout + Model package and external parasitic components + Evaluate, characterize and measure electrical and optical building blocks of a high-speed optical link solution + Assist in the development of automated test lab equipment for lab measurements + Work with manufacturing engineers on production testing and qualification of the EIC/PIC components and systems BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 2+ years of photonics or electro-optical integrated circuit design PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in electrical engineering or computer engineering with an emphasis in electro-optics integrated circuit design + Experience using simulation tools such as Spectre, ADS, HFSS or Momentum, Ansys Lumerical, COMSOL + Photonics design skills, and experience performing analysis and simulation of optical building blocks such as MZM and Microring modulators, Ge Photo diodes, dWDM filters, waveguides, couplers, dividers and polarization management circuitry + Electrical circuit design skills, and experience performing analysis and simulation of both linear and non-linear circuits such as high bandwidth modulator drivers, TIAs, CTLEs, filters, low noise and power amplifiers. + Knowledge of advanced packaging technology for optical engine integration in a co-package optics (CPO) solution + Experience working on wideband circuit designs supporting high speed Serdes links with more than 100Gbps data rate and BW exceeding 10s of GHz + Familiarity with high speed SerDes architecture, modulation schemes such as NRZ and PAM4 and link protocols + Familiarity with optical and radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generators, high speed oscilloscopes and BERTs + Experience characterizing EIC/PIC performance for high speed optical Serdes ADDITIONAL REQUIREMENTS:?

New!

Redmond, WA4 days ago

$160,000–$225,000 Per Year

RESPONSIBILITIES: + Design, simulate and model RF/analog/mixed-signal circuits and systems + Derive specifications for the RFIC subsystems and circuits + Develop Analog/Mixed-Signal/RF/microwave circuits in SiGe or CMOS processes + Work with system architects, modem/DSP and ASIC engineers to partition functions between hardware and software domains + Perform IC floor planning and layout + Model package and external parasitic components + Evaluate and characterize prototypes of the design + Characterize and analyze full radio performance + Assist in the development of automated test lab equipment for lab measurements + Work with manufacturing engineers on production testing and qualification of the RFIC components and systems BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 5+ years of RF integrated circuit experience PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in electrical engineering or computer engineering with an emphasis in RF/Analog/Mixed-signal integrated circuit design + Experience using simulation tools such as Spectre, ADS, HFSS or Momentum + Circuit design skills, and experience performing analysis and simulation of both linear and non-linear circuits such as phase-locked loops, vector modulators/demodulators, oscillators, mixers, filters, low noise and power amplifiers + Knowledge of digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM + Knowledge of RF transceiver architectures + RF/microwave design in the Ku-band, K-band and Ka-band frequency range + Familiarity with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generator, network analyzers + Experience characterizing radio performance in microwave frequencies ADDITIONAL REQUIREMENTS:? ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

New!

Redmond, WA4 days ago

$125,000–$145,000 Per Year

RESPONSIBILITIES: + Design, simulate and model RF/analog/mixed-signal circuits and systems + Derive specifications for the RFIC subsystems and circuits + Develop Analog/Mixed-Signal/RF/microwave circuits in SiGe or CMOS processes + Work with system architects, modem/DSP and ASIC engineers to partition functions between hardware and software domains + Perform IC floor planning and layout + Model package and external parasitic components + Evaluate and characterize prototypes of the design + Characterize and analyze full radio performance + Assist in the development of automated test lab equipment for lab measurements + Work with manufacturing engineers on production testing and qualification of the RFIC components and systems BASIC QUALIFICATIONS: + Bachelor's degree in electrical engineering, computer engineering, or computer science + 2+ years of RF integrated circuit experience PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in electrical engineering or computer engineering with an emphasis in RF/Analog/Mixed-signal integrated circuit design + Experience using simulation tools such as Spectre, ADS, HFSS or Momentum + Circuit design skills, and experience performing analysis and simulation of both linear and non-linear circuits such as phase-locked loops, vector modulators/demodulators, oscillators, mixers, filters, low noise and power amplifiers + Knowledge of digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM + Knowledge of RF transceiver architectures + RF/microwave design in the Ku-band, K-band and Ka-band frequency range + Familiarity with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generator, network analyzers + Experience characterizing radio performance in microwave frequencies ADDITIONAL REQUIREMENTS:? ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$160,000–$225,000 Per Year

RESPONSIBILITIES + Define and develop KPIs and associated metrics that quantify the cost of every asset of the Starlink Ground Network globally including gateway sites, points of presence, data centers, construction, fiber, power, land, hardware, etc. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Bellevue, WA27 days ago

Operations Engineers value their direct relationship with stakeholders and customers and ensure that all requests are evaluated and prioritized based on data-driven analysis aligned with strategic business directives. You will work closely with planning, engineering, business intelligence, program and central teams to develop data-driven insights and metrics that guide strategic decision-making.

Auburn, WA21 days ago

$151,300–$204,700 Per Year

Basic Qualifications (Required Skills/Experience):** + Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement + 3+ years of experience in a professional engineering role + Candidates must have at least one year of experience in a leadership role (team leader, temp manager, large scale cross functional project/program management, or formal manager experience) OR have completed the Boeing internal course "Exploring Leadership" **Preferred Qualifications (Desired Skills/Experience):** + 3+ years of experience working in a production environment + 3 + years of experience with production systems design + Experience in leading or managing teams + Experience working with cross-functional teams + Experience with build plan development and deployment + Experience with CNC machining processes **Conflict of Interest:** Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

Redmond, WA21 days ago

$135,000–$195,000 Per Year

We are seeking motivated, proactive, and intellectually curious engineers who will work alongside world-class cross-disciplinary teams (systems architecture, ASIC design, firmware, pre-silicon verification, post-silicon validation, product engineering, manufacturing/production, and more). ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA21 days ago

$160,000–$225,000 Per Year

Test RF components (RFIC, MMICs, Modules) in the lab + Develop hardware (PCBAs, coupons, sockets) and procure the necessary test equipment for complete RF component characterization and qualification (probing, bench testing, ESD testing, HTOL, etc.) + Derive RF system and RF block specifications + Work with manufacturing engineers and customer teams on production test and debug of RF assemblies BASIC QUALIFICATIONS: + Bachelor's degree in an engineering discipline + 5+ years of research and/or industry experience in RF/microwave circuit design PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in an engineering discipline with emphasis in RF/microwave circuits/systems or electromagnetic theory + Experience with design of linear and non-linear circuits such as power amplifiers, low noise amplifiers, mixers, filters and PLLs + Thorough understanding of RF passive components and EM principles + MMIC and/or RFIC design (full cycle) experience + Module/SiP design (full cycle) experience + RF/microwave design using ADS, HFSS, AWR or similar + RF/microwave design in cellular, Ku, Ka, V, E, and/or W-band frequency range + Schematic and layout using Altium Designer or other PCB design tools + Experience in Matlab, Python, C++ or equivalent tools for modeling and analyzing RF systems + Familiar with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generator, network analyzers + Experience characterizing radio performance at microwave frequencies + Knowledge of digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM + Python programming experience for test automation ADDITIONAL REQUIREMENTS:? RF/Microwave engineer to help develop cutting-edge RFICs, MMICs, RF modules, and System-in-Package (SiP) solutions for deployment in Starlink's satellites, ground infrastructure, and user terminals.

Redmond, WA21 days ago

$105,000–$120,000 Per Year

Redmond, WA21 days ago

$125,000–$145,000 Per Year

RESPONSIBILITIES: + Simulate/model RF front-end systems, working with system architects, modem/DSP and ASIC engineers to partition functions between hardware and software domains + Derive RF HW specifications for the RF system and RF blocks + Develop RF/microwave circuits, components, MMICs, board and packages + Evaluate and characterize prototypes and RF components + Characterize and analyze full radio performance + Assist in the development of automated test equipment for lab measurements + Work with manufacturing engineers on production testing of RF avionics components and systems BASIC QUALIFICATIONS: + Bachelor's degree in an engineering discipline + 2+ years of research and/or industry experience in RF/microwave circuit design PREFERRED SKILLS AND EXPERIENCE: + Master's degree or PhD in an engineering discipline with emphasis in RF/microwave circuits or electromagnetic theory + Experience with design of linear and non-linear circuits such as power amplifiers, low noise amplifiers, mixers, filters and PLLs + Thorough understanding of RF passive components + Familiar with radio related test equipment such as spectrum analyzers, vector signal analyzers, vector signal generator, network analyzers + Experience characterizing radio performance at microwave frequencies + Knowledge of digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM + RF/microwave design using ADS, HFSS, AWR or similar + Understanding of electromagnetic propagation and antenna systems + Schematic and layout using Altium Designer or other PCB design tools + Experience in Matlab, Python, C++ or equivalent tools for modeling and analyzing RF systems + Python and/or LabVIEW programming experience for test automation + Digital communication theory with emphasis on bit error rate and system noise figure + RF/microwave design in the Ku, Ka, V and E-band frequency range ADDITIONAL REQUIREMENTS:? ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Weekend Engineering job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

Weekend Engineering Jobs in Westwood Village, WA

Engineering - Assistant / Associate Scientist Eclaro

Manufacturing Engineer - Rocket Engines Valves (Weekend Shift) Blue Origin LLC

Production Supervisor, Weekend Shift Sekisui Aerospace

CNC Operator III Weekend Shift Sekisui Aerospace

Aerospace Production - Kit Cutter I - Weekend 2nd Shift Sekisui Aerospace

Aerospace Production - Laminator I - Weekend Shift Sekisui Aerospace

Aerospace Assembler I - Weekend Shift (36 Hrs. + 4 Comp Hrs.) Sekisui Aerospace

Engineering Technician GEO SYNTEC CONSULTANTS

RF Test Technician (Weekend Shift Thur-Mon) - 3036875 Apex Systems, Inc.

Vessel Engineering Manager Matson Navigation Company, Inc

CNC Machinist (Weekend Shift: Fri-Sun 5am-5:30pm) RTC Aerospace

Senior Cost Manager Cumming

Product Review Engineer 3 - Liaison Engineering The Structures Company, LLC

Product Review Engineer 2 - Liaison Engineering The Structures Company, LLC

Fire Protection Engineering Essel

Sr. Engineering Technician (2026-050) Astronics

Engineering Manager Peninsula Light Company

High-Speed Electro-Optical IC Engineer Silicon Engineering Space Exploration Technologies Corp

Maintenance | Engineering Supervisor ($44.20/hour) Hyatt

Assembler - Weekends or overnights PDS Tech Commercial

Operations Engineer, GES NA Ops Engineering Amazon

EEE Parts Lab Specialist Starlink Satellite PCB Engineering Space Exploration Technologies Corp

FACILITY ENGINEERING REFRIGERATION HVAC TECH 5 Kroger Family of Companies

FACILITY ENGINEERING REFRIGERATION HVAC TECH 4 Kroger Family of Companies

FACILITY ENGINEERING REFRIGERATION HVAC TECH 3 Kroger Family of Companies

Full-Time/Supervisor Engineering (Candlewood Suites) IHG

KEMI Administrator - Kren Engineering-based Medicine Institute University of Washington

Senior Structural Engineer - Temporary Structures - Kiewit Infrastructure Engineering Kiewit

Robotics & Computer Vision Engineer, GES NA Ops Engineering Amazon

RF Silicon Software Engineer (RFIC Engineering) SpaceX

FPGA/ASIC Design Engineer (Silicon Engineering) SpaceX

Network Development Engineer II - Wireless, OTIE Wireless Engineering Amazon

Sr. RTL Design Engineer (Silicon Engineering) SpaceX

Sr. Silicon Photonics Design Engineer (RFIC Engineering) SpaceX

Sr. High-Speed Electro-Optical IC Engineer (RFIC Engineering) SpaceX

Silicon Photonics Design Engineer (RFIC Engineering) SpaceX

Principal Design Verification Engineer (Silicon Engineering) SpaceX

Design Verification Engineer (Silicon Engineering) SpaceX

Sr. ASIC Design Verification Engineer (Silicon Engineering) SpaceX

Sr. RF Front-End Module Design Engineer (RFIC Engineering) SpaceX

High-Speed Electro-Optical IC Engineer (RFIC Engineering) SpaceX

Sr. RFIC Design Engineer (RFIC Engineering) SpaceX

RFIC Design Engineer (RFIC Engineering) SpaceX

Sr. Data Engineer, Ground Network Engineering (Business Analytics) SpaceX

Sr. Operations Engineer, North America Sort Center/SSD Engineering Amazon

Production Engineering Manager - Fabrication The Boeing Company

Sr. RFIC Layout Designer (RFIC Engineering) SpaceX

Sr. RF/Microwave Engineer (RFIC Engineering) SpaceX

RFIC Layout Designer (RFIC Engineering) SpaceX

RF/Microwave Engineer (RFIC Engineering) SpaceX

Resume Resources