Aerospace Production - Kit Cutter I - Weekend 2nd Shift Sekisui AerospaceAerospace Production - Kit Cutter I - Weekend 2nd ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Kit Cutter I - Weekend 1st Shift Sekisui AerospaceKit Cutter I - Weekend 1st ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Aerospace Production - Laminator I - Weekend Shift Sekisui AerospaceAerospace Production - Laminator I - Weekend ShiftRenton, WAFull timeE-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. seeking professionals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of production for our Laminator I - weekend shift position at our Renton, WA facility.
CNC Operator III Weekend Shift Sekisui AerospaceCNC Operator III Weekend ShiftRenton, WAFull timePrepare machine by reviewing work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). Competent in basic math and algebra; using all units of measure, whole numbers, common fractions, and decimals; computing rate, ratio, and percent; drawing and interpreting bar graphs.
Aerospace Assembler I - Weekend Shift (36 Hrs. + 4 Comp Hrs.) Sekisui AerospaceAerospace Assembler I - Weekend Shift (36 Hrs. + 4 Comp Hrs.)Renton, WAFull timeThe Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Aerospace Manufacturing Production Worker - All Shifts Sekisui AerospaceAerospace Manufacturing Production Worker - All ShiftsRenton, WAFull timeseeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Advanced Composites Manufacturing Lead - Weekend Shift Sekisui Chemical LtdAdvanced Composites Manufacturing Lead - Weekend ShiftRenton, WA$30.25–$34.25 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.
Manufacturing Engineer - Rocket Engines Valves (Weekend Shift) Blue Origin Enterprises LPManufacturing Engineer - Rocket Engines Valves (Weekend Shift)WA$75,289–$105,404.25 / yearResponsibilities include but are not limited to: Develop manufacturing work instructions to clearly define the following manufacturing process: receiving inspection, fabrication, assembly, test, integration, and refurbishment Closely manage cost, quality, build sequence, and schedule of hardware throughout the entire manufacturing process Perform engineering drawing review and provide final approval for manufacturing Develop process control measures and evaluation through statistical analysis Define and support repair and rework activities Design, procure, install, and integrate custom manufacturing tooling and equipment Collaborate with external suppliers and manufacturing partners to ensure that hardware and equipment is manufactured, processed, packaged, and delivered properly, on time, and on budget Perform root cause analyses when non-conformances and escapes are identified and deploy corrective actions Design proper material handling and packaging to protect hardware throughout the build and test process Manage hardware configuration and maintain pedigree throughout the entire build and test process. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training.
NewManufacturing Engineer II - Rocket Engines Valves (Weekend Shift) Blue OriginManufacturing Engineer II - Rocket Engines Valves (Weekend Shift)Seattle, WA$75,289–$105,404.25 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Experience with AS9100 Quality Management System (QMS).Compensation Range for WA applicants is $75,289.00 - $105,404.25Other site ranges may differOther site ranges may differ.
Weekend Manufacturing Machine Operator - 3 Day Schedule Cascade CoffeeWeekend Manufacturing Machine Operator - 3 Day ScheduleEverett, WashingtonFounded in 1977, the company operates from a 150,000 square foot manufacturing and roasting facility, more than 2 million pounds of green coffee storage facility, over 50 million pounds annually of coffee roasting capacity as well as multiple roasting lines, flavor mixing systems and 14 automated packaging lines. WORK ENVIROMENT AND EQUIPMENT: This position is inside a warehouse roasting facility that requires constant standing on concrete floors, exposed to loud equipment noise and subject to coffee dust and flavoring smells.
Tool Prep I - Aerospace Manufacturing - Weekend Shift Sekisui Chemical LtdTool Prep I - Aerospace Manufacturing - Weekend ShiftRenton, WA$22.25–$26.25 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Oven Operator II (Weekend Shift) - Aerospace Manufacturing Sekisui Chemical LtdOven Operator II (Weekend Shift) - Aerospace ManufacturingRenton, WA$24.25–$28.25 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Manufacturing Engineer, Solar Starlink Space Exploration Technologies CorpManufacturing Engineer, Solar StarlinkRedmond, WA$95,000–$115,000 / yearRESPONSIBILITIES: Design and implement electro-mechanical assembly and test processes Collaborate with the mechanical design team to incorporate design for manufacturability Lead prototype builds ensuring incremental milestones for the production development are met Ensure manufacturing systems are capable of hitting high volume rate, cost and quality targets Lead facilities development, floor layout, headcount requirements and material flow definition Identify tooling and hardware requirements, design and implement into production processes Identify automation opportunities and establish requirements as well as evaluating return on investment for each Work with in-house resources or vendors as necessary to develop these solutions and implement on production line. We are looking for talented, creative, and driven manufacturing engineers to drive manufacturing tools and processes, from initial concept development to full scale production, and will interact regularly with senior leadership during critical design phases.
Manufacturing Engineer - Supplier Development Starlink Space Exploration Technologies CorpManufacturing Engineer - Supplier Development StarlinkRedmond, WA$95,000–$115,000 / yearRESPONSIBILITIES: • Improve quality, cost, delivery, and capacity metrics for mechanical hardware used in the Starlink satellite systems • Collaborate with design, materials, and manufacturing engineers to gain an in-depth knowledge of piece part, assembly, metrology, and/or sub-system design intent • Support the procurement team to strategically source parts matched with supplier competencies by reviewing and assessing supplier manufacturing processes and quality systems • Create and define supplier technical and quality requirements based on customer and program requirements and expectations for NPI and production phases • Lead resolution of supplier quality issues through root cause analysis, while functioning as liaison between purchasing, engineering, production, and suppliers • Define product technical requirements, and ensure supplier compliance with these requirements • Implement and monitor the production part approval process (PPAP) with selected suppliers to enable rate production • Analyze supplier quality and delivery metrics to identify trends and pinpoint systemic performance gaps and root causes to drive supplier improvement plans • Conduct independent research to identify potential new suppliers and capabilities in manufacturing and metrology • Identify and drive product and process improvements to lower part cost, reduce supply risk, eliminate potential defects, and improve cycle time • Effectively manage mission-critical supply chain by establishing excellent working relationships and regular lines of communication with suppliers • Demonstrate a strong sense of ownership, proactivity, technical excellence, creativity, self-direction, and courage • Collaborate with teams, lead projects, and continuously drive improvement in the supply base. • Proven track record of taking ownership of projects, negotiating successfully to reduce costs, and influencing engineering customers to drive results • Knowledge of statistical techniques and methods (design of experiments, Six Sigma, etc.) • Proficiency in Geometric Dimensioning and Tolerancing (GDT) principles and applications • Knowledge of metrology tools and techniques for measuring and characterizing mechanical parts • Knowledge of lean, production, and supply chain concepts • Exceptional analytical, problem-solving, time management, and organizational skills • Ability to act quickly in a fast-moving and high-stress environment.
Manufacturing Engineer - Supplier Development, Optics & Optomechanical Systems Starlink Space Exploration Technologies CorpManufacturing Engineer - Supplier Development, Optics & Optomechanical Systems StarlinkRedmond, WA$95,000–$115,000 / yearRESPONSIBILITIES: • Improve quality, cost, delivery, and capacity metrics for mechanical hardware used in the Starlink satellite and ground station systems • Collaborate with design, materials, and manufacturing engineers to gain an in-depth knowledge of piece part, assembly, metrology, and/or sub-system design intent • Drive design for manufacturing feedback and best practices with peer teams for efficient and highly scalable production designs • Support the procurement team to strategically source parts matched with supplier competencies by reviewing and assessing supplier manufacturing processes and quality systems • Create and define supplier technical and quality requirements based on customer and program requirements and expectations for NPI and production phases • Lead resolution of supplier quality issues through root cause analysis, while functioning as liaison between purchasing, engineering, production, and suppliers • Define product technical requirements, and ensure supplier compliance with these requirements • Implement and monitor the production part approval process (PPAP) with selected suppliers to enable rate production • Analyze supplier quality and delivery metrics to identify trends and pinpoint systemic performance gaps and root causes to drive supplier improvement plans • Conduct independent research to identify potential new suppliers and capabilities in manufacturing and metrology • Identify and drive product & process improvements to lower part cost, reduce supply risk, eliminate potential defects, and improve cycle time • Effectively manage mission-critical supply chain by establishing excellent working relationships and regular lines of communication with suppliers • Demonstrate a strong sense of ownership, proactivity, technical excellence, creativity, self-direction, and courage • Collaborate with teams, lead projects, and continuously drive improvement in the supply base. PREFERRED SKILLS AND EXPERIENCE: • Master's degree in optics, engineering, business, or supply chain • Proven track record of taking ownership of projects, negotiating successfully to reduce costs, and influencing engineering customers to drive results • Knowledge of statistical techniques and methods (design of experiments, Six Sigma, etc.) • Knowledge of lean, production, and supply chain concepts • Exceptional analytical, problem-solving, time management, and organizational skills • Ability to act quickly in a fast-moving and high-stress environment.
Manufacturing Engineer, Components Test Space Exploration Technologies CorpManufacturing Engineer, Components TestRedmond, WA$105,000–$120,000 / yearWe are looking for a talented manufacturing engineer to support the production of Starlink satellites, who will be responsible for leading the efficient and reliable acceptance testing of satellite electronics, development of advanced electrical test systems, and evolution of production and testing processes. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Mechanical Engineer, Optical & Space Lasers Manufacturing Starlink Space Exploration Technologies CorpMechanical Engineer, Optical & Space Lasers Manufacturing StarlinkRedmond, WA$100,000–$117,500 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This team is frequently asked to tackle new, inter-departmental development projects and the ultimate goal is to deliver the optical assemblies required for our satellites to achieve their mission.
Manager, Manufacturing Bristol Myers SquibbManager, ManufacturingBothell, WA$113,930–$138,051 / yearWork-life benefits include:** Paid Time Off + US Exempt Employees: flexible time off (unlimited, with manager approval, 11 paid national holidays (not applicable to employees in Phoenix, AZ, Puerto Rico or Rayzebio employees) + Phoenix, AZ, Puerto Rico and Rayzebio Exempt, Non-Exempt, Hourly Employees: 160 hours annual paid vacation for new hires with manager approval, 11 national holidays, and 3 optional holidays Based on eligibility*, additional time off for employees may include unlimited paid sick time, up to 2 paid volunteer days per year, summer hours flexibility, leaves of absence for medical, personal, parental, caregiver, bereavement, and military needs and an annual Global Shutdown between Christmas and New Years Day. Manager or Associate Director **Qualifications** **Education** + Bachelors in relevant science or engineering discipline, or equivalent in work experience **Experience** + 5+ years of experience in cGMP cell therapy manufacturing, bioprocessing manufacturing, or relevant experience with 2 years leadership experience (i.e. lead or equivalent) including performance management responsibilities is highly desirable + Experience in the following is highly preferred: + Cell therapy manufacturing + Aseptic processing in ISO 5 biosafety cabinets and universal precautions for handling human derived materials in BSL-2/ML-1 containment areas.
Supervisor Manufacturing Biolife SolutionsSupervisor ManufacturingBothell, WashingtonOur tools portfolio includes our proprietary, serum-free and protein-free, fully defined CryoStor® freeze media and HypoThermosol® shipping and storage media, and ThawSTAR® family of automated, water-free thawing products. This position is accountable for the efficient operation of the manufacturing processes, collaborating with supervisors/team leads from multiple shifts to ensuring accuracy of production and performing troubleshooting activities as needed.
Manufacturing Quality Control Technician Cascade CoffeeManufacturing Quality Control TechnicianEverett, WashingtonFounded in 1977, the company operates from a 175,000 square foot manufacturing and roasting facility, more than 2 million pounds of green coffee storage facility, 50 million pounds annually of coffee roasting capacity as well as multiple roasting lines, flavor mixing systems and 14 automated packaging lines. Cascade works behind the scenes to provide innovation, world-class coffee roasting, and a wide variety of packaging options to highlight their loyal customer’s brands.
Manufacturing Quality Control Lead Technician Cascade CoffeeManufacturing Quality Control Lead TechnicianEverett, WashingtonFounded in 1977, the company operates from a 150,000 square foot manufacturing and roasting facility, more than 2 million pounds of green coffee storage facility, 50 million pounds annually of coffee roasting capacity as well as multiple roasting lines, flavor mixing systems and 14 automated packaging lines. Cascade works behind the scenes to provide innovation, world-class coffee roasting, and a wide variety of packaging options to highlight their loyal customer’s brands.
Manufacturing Quality Control Lead Technician Cascade Coffee, Inc.Manufacturing Quality Control Lead TechnicianEverett, WA$24–$28 / hourFounded in 1977, the company operates from a 150,000 square foot manufacturing and roasting facility, more than 2 million pounds of green coffee storage facility, 50 million pounds annually of coffee roasting capacity as well as multiple roasting lines, flavor mixing systems and 14 automated packaging lines. Cascade works behind the scenes to provide innovation, world-class coffee roasting, and a wide variety of packaging options to highlight their loyal customer's brands.
Manufacturing Automation Engineer, Solar - Starlink Space Exploration Technologies CorpManufacturing Automation Engineer, Solar - StarlinkRedmond, WA$100,000–$117,500 / yearSoftware: PLC programming, preferably Beckhoff TwinCAT structured text, state machines, applying Object Oriented Programming to mechanical assemblies, electrical systems, sensors, pneumatics/hydraulics, etc. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Engineer, Solar (Starlink) SpaceXManufacturing Engineer, Solar (Starlink)Redmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We are looking for talented, creative, and driven manufacturing engineers to drive manufacturing tools and processes, from initial concept development to full scale production, and will interact regularly with senior leadership during critical design phases.
Manufacturing Engineer, Supplier Development (Starlink) SpaceXManufacturing Engineer, Supplier Development (Starlink)Redmond, WA$100,000–$115,000 / yearRESPONSIBILITIES: + Improve quality, cost, delivery, and capacity metrics for mechanical hardware used in the Starlink satellite systems + Collaborate with design, materials, and manufacturing engineers to gain an in-depth knowledge of piece part, assembly, metrology, and/or sub-system design intent + Support the procurement team to strategically source parts matched with supplier competencies by reviewing and assessing supplier manufacturing processes and quality systems + Create and define supplier technical and quality requirements based on customer and program requirements and expectations for NPI and production phases + Lead resolution of supplier quality issues through root cause analysis, while functioning as liaison between purchasing, engineering, production, and suppliers + Define product technical requirements, and ensure supplier compliance with these requirements + Implement and monitor the production part approval process (PPAP) with selected suppliers to enable rate production + Analyze supplier quality and delivery metrics to identify trends and pinpoint systemic performance gaps and root causes to drive supplier improvement plans + Conduct independent research to identify potential new suppliers and capabilities in manufacturing and metrology + Identify and drive product & process improvements to lower part cost, reduce supply risk, eliminate potential defects, and improve cycle time + Effectively manage mission-critical supply chain by establishing excellent working relationships and regular lines of communication with suppliers + Demonstrate a strong sense of ownership, proactivity, technical excellence, creativity, self-direction, and courage + Collaborate with teams, lead projects, and continuously drive improvement in the supply base BASIC QUALIFICATIONS: + Bachelor's degree in an engineering or STEM discipline + 2+ years of experience in one of the following: manufacturing, supply chain engineering, supplier development/quality, or design engineering (internship experience is applicable) PREFERRED SKILLS AND EXPERIENCE: + Master's degree in engineering, business, or supply chain + Manufacturing experience in an area such as CNC, Injection Molding, Castings, etc. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Associate Johnson Service GroupManufacturing AssociateBothell, WAThis person will support operations within our cGMP clinical manufacturing facility producing plasmids, viral vectors, and autologous cell therapies. The ideal candidate will have prior experience in biopharmaceutical manufacturing and a strong commitment to quality, teamwork, and operational excellence.
Manufacturing Engineer, Optical Fiber Starlink Space Exploration Technologies CorpManufacturing Engineer, Optical Fiber StarlinkRedmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Our engineers are endlessly curious, love to learn and try out new things, and work collaboratively across disciplines in a dynamic environment with changing needs as we strive to deliver high-impact technology on a global scale.
Manufacturing Engineer - Supplier Development, Optics & Optomechanical Systems (Starlink) SpaceXManufacturing Engineer - Supplier Development, Optics & Optomechanical Systems (Starlink)Redmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.
Manufacturing Planner Level 3 The Structures Company, LLCManufacturing Planner Level 3SeaTac, WAAs trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Assist with development and integration of suppliers, processes, materials, data, and technology to meet manufacturing and delivery requirements.
NewManufacturing Engineer, Solar (Starlink) Space Exploration TechnologiesManufacturing Engineer, Solar (Starlink)Redmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS:* To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We are looking for talented, creative, and driven manufacturing engineers to drive manufacturing tools and processes, from initial concept development to full scale production, and will interact regularly with senior leadership during critical design phases.
Manufacturing Test Technician II, Amazon Leo Amazon.com IncManufacturing Test Technician II, Amazon LeoKirkland, WAExport Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step.
Manufacturing Test Technician II (1st shift), Amazon Leo Amazon.com IncManufacturing Test Technician II (1st shift), Amazon LeoKirkland, WAIts mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Manufacturing Test Technician, Amazon Leo Amazon.com IncManufacturing Test Technician, Amazon LeoKirkland, WAExport Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step.
Manufacturing Test Technician II, Amazon Leo MIST Amazon.com IncManufacturing Test Technician II, Amazon Leo MISTKirkland, WAExport Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step.
NewManufacturing Engineer Matlen SilverManufacturing EngineerRedmond, WAKey Responsibilities Troubleshoot and resolve manufacturing issues, identifying root causesDevelop and improve manufacturing processes and documentationBalance production lines and implement best practicesLead process validations, tooling installation, and equipment qualificationCollaborate on DFx (Design for Excellence) improvementsEnhance material handling, ergonomics, and safety in productionTrain assembly teams on new or revised processesWho We're Looking For Self-starters who drive productivity and process improvementsTeam players who collaborate across engineering, quality, and productionAnalytical thinkers who solve problems with a data-driven mindsetQualifications Bachelor's in Manufacturing, Mechanical, Industrial Engineering, or equivalent experience2+ years in process development, design, or validationStrong data analysis and organizational skills (preferred)Job Details Shifts: 2 Positions Available – 2nd Shift & Weekend ShiftEmployment Type: Full-TimeGet notified about new Manufacturing Engineer jobs in Redmond, WA.#J-18808-Ljbffr. In this role, you'll collaborate with cross-functional teams to improve manufacturing processes, enhance quality, reduce variability, and support production flow.
Manufacturing Automation Engineer, Solar - (Starlink) SpaceXManufacturing Automation Engineer, Solar - (Starlink)Redmond, WA$105,000–$120,000 / yearSafely testing and commissioning integrated systems Software: + PLC programming, preferably Beckhoff TwinCAT structured text, state machines, applying Object Oriented Programming to mechanical assemblies, electrical systems, sensors, pneumatics/hydraulics, etc. PREFERRED QUALIFICATIONS: Hands on experience with at least one of the specific disciplines below and interest in learning the other areas you are not yet strong in: Industrial Automation: + Automation Hardware: PLC's, COTS Robots, servo motion, machine vision, distributed IO, pneumatic controls, etc.
NewManufacturing Automation Engineer, Solar - (Starlink) Space Exploration TechnologiesManufacturing Automation Engineer, Solar - (Starlink)Redmond, WA$100,000–$117,500 / yearQUALIFICATIONS:Hands on experience with at least one of the specific disciplines below and interest in learning the other areas you are not yet strong in:Industrial Automation:* Automation Hardware: PLC's, COTS Robots, servo motion, machine vision, distributed IO, pneumatic controls, etc.* Field Bus Networking protocols: EtherCAT, Profinet, Ethernet/IP, Modbus TCP/RTU, etc.* Machinery and processes: dispenser, pick and place, fastener installation, automated bonding, thermo-compression, soldering, ultrasonic welding, temperature & position control, injection molders, die casters, etc. and design for manufacturing.* BASIC QUALIFICATIONS:* Bachelor's degree in Electrical Engineering, Mechanical Engineering, Computer Science/Engineering or another STEM field.* 1+ years' experience in the design and commissioning of automation and controls systems for manufacturing (internships/co-ops can apply).PREFERRED
Manufacturing Engineer, Optical Fiber (Starlink) SpaceXManufacturing Engineer, Optical Fiber (Starlink)Redmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Our engineers are endlessly curious, love to learn and try out new things, and work collaboratively across disciplines in a dynamic environment with changing needs as we strive to deliver high-impact technology on a global scale.
Manufacturing Assembly Technician II, Amazon Leo Amazon.com IncManufacturing Assembly Technician II, Amazon LeoKirkland, WAExport Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step.
Manufacturing Assembly Technician III, Amazon Leo Amazon.com IncManufacturing Assembly Technician III, Amazon LeoKirkland, WAExport Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step.
Manufacturing Assembly Technician III, 2nd Shift, Amazon Leo Amazon.com IncManufacturing Assembly Technician III, 2nd Shift, Amazon LeoKirkland, WAExport Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step.
Manufacturing Assembly Technician III (2nd Shift), Amazon Leo AmazonManufacturing Assembly Technician III (2nd Shift), Amazon LeoKirkland, WAShifts may vary, depending on program needs - Able to stand for long periods of time and perform repetitive assembly operations - Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift at least 25 lbs. - Process Compliance: Execute work in accordance with established procedures, specifications, and work instructions - Non-Conformance Documentation: Identify and document non-conformities as required to ensure traceability and corrective action.
Aerospace Production - Laminator I & II - Weekend 1st Shift Sekisui Chemical LtdAerospace Production - Laminator I & II - Weekend 1st ShiftRenton, WA$22.25–$26.25 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. Our team members take pride in producing high-quality composite structures and assemblies that support some of the world's leading advanced composites manufacturing.
Aerospace Manufacturing Production Worker - All Shifts Sekisui Chemical LtdAerospace Manufacturing Production Worker - All ShiftsRenton, WA$22.25–$26.25 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. SEKISUI Aerospace is seeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location.
Laminator I - Weekend Shift Sekisui Chemical LtdLaminator I - Weekend ShiftRenton, WA$22.25–$26.25 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Manufacturing Manager The Boeing CoManufacturing ManagerRenton, WA$119,000–$161,000 / yearCandidates must have at least one year of experience in a leadership role (team leader, temp manager, large scale cross-functional project/program management, or formal manager experience) OR have completed the Boeing internal course "Exploring Leadership". The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Manufacturing Specialist Satellite Transceiver Space Exploration Technologies CorpManufacturing Specialist Satellite TransceiverRedmond, WA$34–$40 / hourEnabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Specialist, Solar Starlink Space Exploration Technologies CorpManufacturing Specialist, Solar StarlinkRedmond, WA$34–$40 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.
Manufacturing Specialist Satellite Transceiver - 2nd Shift Space Exploration Technologies CorpManufacturing Specialist Satellite Transceiver - 2nd ShiftRedmond, WA$34–$40 / hourEnabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Aerospace Assembler I - Weekend Shift (36 Hrs. + 4 Comp Hrs.) Sekisui Chemical LtdAerospace Assembler I - Weekend Shift (36 Hrs. + 4 Comp Hrs.)Renton, WA$22.25–$26.25 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.