NewWelding Inspector Synerfac Technical StaffingWelding InspectorVirginia Beach, VAAbout the job: The Welding QC Inspector will support operational excellence by performing inspections, documenting results, and partnering with production and quality teams to identify and resolve non-conformances. Disclaimer: By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners.
NewCertified Welding Inspector Synerfac Technical StaffingCertified Welding InspectorTallahassee, FLThe ideal candidate must be a current AWS Certified Welding Inspector (CWI) with structural and/or bridge experience, along with one of the following: NDT Level II certification in UT Shearwave and Magnetic Particle Testing (PAUT experience is a plus); NACE Level II or III certification; or ICC certification in Structural Steel and Bolting, with a willingness to obtain the ICC Firestopping certification. The role involves performing inspections in accordance with applicable codes and project requirements, ensuring that all aspects of the work align with plans and specifications.
NewENGINEER - RESEARCH ENGINEER - Welding & Fabrication Southwest Research InstituteENGINEER - RESEARCH ENGINEER - Welding & FabricationSan Antonio, TXObjectives of this Role: Apply principles, theories and concepts to welding and fabrication execution, leading project fabrication efforts by translating design intent into qualified, repeatable welding processes for large pressure vessels and structural assemblies. We service all technical areas of Southwest Research Institute and are involved in a large cross section of the total of SwRI's and commissioned pressure vessels of various types for land-based, subsea, manned, and unmanned purposes.
NewCWI Inspector Synerfac Technical StaffingCWI InspectorCharlotte, NC$30–$45 / hourTemporaryContractorBy applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. This person will spend their time primarily at job sites in the greater Charlotte area, with minimal overnight travel expected.
ENGINEER - RESEARCH ENGINEER - Welding & Fabrication Southwest Research Institute - FulltimeENGINEER - RESEARCH ENGINEER - Welding & FabricationSan Antonio, TXFull timeObjectives of this Role: Apply principles, theories and concepts to welding and fabrication execution, leading project fabrication efforts by translating design intent into qualified, repeatable welding processes for large pressure vessels and structural assemblies. We service all technical areas of Southwest Research Institute and are involved in a large cross section of the total of SwRI's and commissioned pressure vessels of various types for land-based, subsea, manned, and unmanned purposes.
QC Inspector JobotQC InspectorStanton, CA$25–$35 / hourWith a focus on overcoming the unique challenges of low-volume runs, our reputation is built on our ability to respond quickly and effectively to complex production and cost challenges, ensuring sustainable growth and excellence in industrial manufacturing. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal.
Senior Inspector The LiRo GroupSenior InspectorGlastonbury, CTRecently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential.
NewManager of Welding Technology Synerfac Technical StaffingManager of Welding TechnologyVirginia Beach, VADisclaimer: By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. The position plays a critical role in advancing welding capabilities, improving quality, and developing workforce expertise.
CWI Inspector PTS AdvanceCWI InspectorSparks, NV$55–$65 / hourFull timeWe are seeking an experienced QA/QC Inspector (CWI) to support industrial and commercial construction projects with a strong emphasis on piping systems, welding quality, and mechanical equipment installations. The ideal candidate will have hands-on experience with ASME B31 piping systems, welding inspections, fabrication processes, and non-destructive testing (NDT).
QC Inspector - Nucor Towers & Structures NucorQC Inspector - Nucor Towers & StructuresBrigham City, UTNucor Towers and Structures (NTS) is a new entity within Nucor, the largest recycler and largest manufacturer of steel and steel products in North America, focused on the execution of our strategy to “Expand Beyond” our core business. With a firm commitment to our teammates, strong benefits and performance incentives, it’s easy to see why Nucor is named one of America’s best employers and ranked as the #1 employer in its industry by Fortune Magazine.
Inspector - Magnetic Penetrant And Dye Check Johnson Service GroupInspector - Magnetic Penetrant And Dye CheckNashville, TNVisually examines iron oxide powder, penetrant oil or dye check patterns basing disposition (accepted, rejected, or rework) upon buildup, location, and course of pattern, depth and number of defects and nature of part and fabrication operations involved. This occupation requires the operation of magnetic, penetrant and dye check inspection equipment and the subsequent inspection for defects in ferrous and non-ferrous welded, forged, cast, raw and machined parts.
NewQC Inspector NucorQC InspectorWest_Hazleton, PANucor Towers and Structures (NTS) is a new entity within Nucor, the largest recycler and largest manufacturer of steel and steel products in North America, focused on the execution of our strategy to “Expand Beyond” our core business. The 1st and 2nd shift QC Inspector’s principal duties include but are not limited to: Verify and document that finished product has been manufactured in such a manner that meets the requirements of the customer specifications and AWS D1.1.
QA Inspector CollaberaQA InspectorQuarryville$50–$60 / hourTemporaryContractorTitle - Site QA Inspector | Mechanical QA/QC Inspector | Mechanical QC Inspector | Piping Inspector | Mechanical Inspector | Piping QA/QC Inspector | Mechanical Quality Engineer | Mechanical Construction Inspector | Pipeline Inspector | Welding Inspector | Mechanical Commissioning Inspector. Job Description: 5-10 years of mechanical, piping, equipment installation QA/QC, commissioning compliance / QA/QC, inspection, or related industrial construction experience.
NewQUALITY INSPECTOR Anderson DahlenQUALITY INSPECTORRamsey, MN$24–$33 / hourDescription: Gray’s Specialty Equipment segment offers a comprehensive range of expert services, including design, manufacturing, integration, installation, and maintenance of some of the most advanced systems in the food, industrial, pharmaceutical, and vacuum science markets. Perform dimensional and visual inspections, interpret engineering drawings and schematics, support compliance activities, and prepare customer documentation packages to ensure products meet all contractual and regulatory requirements.
UT Level II Weld Inspector / QA Technician Wagstaff IncUT Level II Weld Inspector / QA TechnicianSpokane Valley, WA$26–$38 / hourRequirements: Must have at least five (5) years of UT (ultrasonic testing) Shear Wave weld inspection experience in a regulated industry (nuclear, boiler & pressure vessel, aerospace, oil & gas, etc.). Must be physically able to perform inspections in a manufacturing environment, including the operation of overhead cranes, jibs, and forklifts after undergoing company training.
NewQuality Control Manager JobotQuality Control ManagerEau Claire, WI$100,000–$120,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Coordinate with DOT inspectors and customer engineers to schedule inspections, address concerns, and ensure timely completion of required documentation.
Dimensional Inspector I PCT - Pacific Cast TechnologiesDimensional Inspector IScio, ORcomponents and sub-assemblies, supplying the commercial aerospace, military, and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry.
Visual Inspector - 1st Shift (4:00 AM - 12:30 PM) Consolidated Precision ProductsVisual Inspector - 1st Shift (4:00 AM - 12:30 PM)Cudahy, CA$25–$29 / hourConsolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. Performs visual inspection of castings using bore scope and fiber optic, as necessary, to check for broken cores, shrinkage, incomplete welds, cracks, pits, and other surface defects.
Visual Inspector - 1st Shift (5:00 AM - 1:30 PM) Consolidated Precision ProductsVisual Inspector - 1st Shift (5:00 AM - 1:30 PM)City of Industry, CA$19–$21 / hourConsolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. Performs visual inspection of castings using bore scope and fiber optic, as necessary, to check for broken cores, shrinkage, incomplete welds, cracks, pits, and other surface defects.
Senior Geotechnical Engineer JobotSenior Geotechnical EngineerWheeler, AR$80,000–$140,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. We have 49 years of combined experience in the fields of Geotechnical Engineering, Construction Materials Testing, Geotechnical Analysis and Design, and Environmental Compliance Assessments.