Spot Welding/PEM Machine Operator MJ CelcoSpot Welding/PEM Machine OperatorSchiller Park, ILFull timeListens for unusual sounds from machines or equipment to detect malfunctions and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem and/or repair machine. Actively participates in work center readiness audits and verifies the receipt and proper documentation of all required approvals in advance of beginning production job orders.
MIG WELDING (AU#336891) Barton Staffing SolutionsMIG WELDING (AU#336891)NORTH AURORA, IL$21.50Precision Setup: Prepare and align components using calipers, rulers, and other measuring tools; perform prep work with grinders as needed. Welding & Fabrication: Operate manual or semi-automatic welding equipment in various positions to weld, fabricate, and repair components.
MIG WELDING (AU#336383) Barton Staffing SolutionsMIG WELDING (AU#336383)NORTH AURORA, IL$20Precision Setup: Prepare and align components using calipers, rulers, and other measuring tools; perform prep work with grinders as needed. Welding & Fabrication: Operate manual or semi-automatic welding equipment in various positions to weld, fabricate, and repair components.
Welding Engineer TechStaff, IncWelding EngineerChicago, ILdevelop and qualify weld procedures and prepared weld documentation; assists sales and design engineering with drawing, specification and contract reviews to satisfy welding and NDT inspection requirements; develop welder, brazer, and NDT training programs; prepare justifications for purchase of robotic and semi-automatic welding equipment, induction heat treatment equipment, and weld procedure software; review welding consumable material test reports; provide limited shop floor and on-site nondestructive inspection and weld process support, and participate in and conduct onsite vendor reviews. QUALIFIED CANDIDATES MUST SEND A WORD DOCUMENT RESUME AND A BRIEF NOTE STATING AVAILABILITY, SALARY REQUIREMENT AND SPECIFIC LOCATION PREFERENCES TO: ckahn@techstaffwi.com.
Welding Engineer / Inspector - U.S. (Remote) DNV GL SEWelding Engineer / Inspector - U.S. (Remote)Oak Brook, ILRemote$75,000–$115,000 / yearThis position will provide sustainable and continuous service support for PED services, review/approval of permanent joining (welding) processes and personnel and development of welding program under Pressure Equipment certification services, primarily the EU Pressure Equipment Directive (PED). The role of Specialist, Permanent Joining is intended to focus technical support in a uniform manner and support existing portfolio as well as market growth for Pressure Equipment Directive services tied to welding activities.
Welding Technician Holland L PWelding TechnicianIL$27–$30 / hourMinimum 5 years' experience working on or performing maintenance and or repairs on various heavy industrial hydraulic and mechanical operated equipment. Minimum 5 years' experience metal cutting skills using gas oxygen torch and plasma cutting to repair of basic steel structures.
ILUS - Welding Supervisor DaifukuILUS - Welding SupervisorHobart, Indiana$70,000–$90,000 / yearWe provide leading‐edge conveyor and sortation systems, voice and light‐directed order fulfillment equipment, controls and software, robotics, mezzanines, and structures. Position Summary: The Welding Plant Supervisor (1st Shift 6:00am-2:30pm) supervises activities of the Steel Fabrication-Welding Team, which fabricates conveyor steel products for material handling projects.
1st Shift Welding Plant Supervisor (6:00am-2:30 pm CST) Daifuku1st Shift Welding Plant Supervisor (6:00am-2:30 pm CST)Hobart, IN$70,000–$90,000 / yearWe provide leading‐edge conveyor and sortation systems, voice and light‐directed order fulfillment equipment, controls and software, robotics, mezzanines, and structures. Position Summary: The Welding Plant Supervisor (1st Shift 6:00am-2:30pm) supervises activities of the Steel Fabrication-Welding Team, which fabricates conveyor steel products for material handling projects.
Welding Inspector (CWI) Sterling Engineering, Inc.Welding Inspector (CWI)Itasca, IL$38–$45 / hourWe are hiring an experienced Certified Welding Inspector (CWI) to support high-quality industrial fabrication in a fast-paced manufacturing environment. If you take pride in precision work and getting it right the first time, this is a great opportunity to join a strong, team-oriented operation.
Welding Application Engineer AmadaWelding Application EngineerSchaumburg, IllinoisThis role is critical in helping customers optimize processes, validate applications, and ensure the successful integration of our laser welding solutions into real-world production environments. The ideal candidate brings hands-on experience with fiber laser welding, a strong understanding of metallurgical behavior, and the ability to bridge the gap between advanced technology and customer requirements.
ILUS - Welding Supervisor Daifuku Intralogistics AmericaILUS - Welding SupervisorHobart, Indiana$70,000–$90,000 / yearWe provide leading‐edge conveyor and sortation systems, voice and light‐directed order fulfillment equipment, controls and software, robotics, mezzanines, and structures. Position Summary: The Welding Plant Supervisor (1st Shift 6:00am-2:30pm) supervises activities of the Steel Fabrication-Welding Team, which fabricates conveyor steel products for material handling projects.
ILUS - Fabrication & Welding Manager DaifukuILUS - Fabrication & Welding ManagerHobart, IndianaManages the Fabrication and Welding team, including recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising, and reviewing job contributions; planning and reviewing compensation actions; enforcing policies and procedures. We provide leading‐edge conveyor and sortation systems, voice and light‐directed order fulfillment equipment, controls and software, robotics, mezzanines, and structures.
1st Shift Fabrication & Welding Manager (5:00am-1:30pm CST) Daifuku1st Shift Fabrication & Welding Manager (5:00am-1:30pm CST)Hobart, INManages the Fabrication and Welding team, including recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising, and reviewing job contributions; planning and reviewing compensation actions; enforcing policies and procedures. We provide leading‐edge conveyor and sortation systems, voice and light‐directed order fulfillment equipment, controls and software, robotics, mezzanines, and structures.
Adjunct Faculty, Welding Morton CollegeAdjunct Faculty, WeldingILAs a comprehensive community college, Morton College's mission is to enhance the quality of life of our diverse community through exemplary teaching and learning opportunities, community service, and lifelong learning. Respond to e-mails from students, staff, and college administrators in a timely manner while classes are in session using assigned college designated e-mail.
Certified Welding Inspector - Chicago, IL Bureau Veritas SACertified Welding Inspector - Chicago, ILChicago, IL$35–$55 / hourClient oriented approach with emphasis on understanding and fulfilling the needs of the client; Detail oriented with a dedication to the quality control and quality assurance process; ability to understand and read complex design and fabrication plans and specifications; Excellent communication and documentation skills, with ability to communicate technical issues to the Project Manager, clients, BV Employees, and the fabrication facilities. Ability to multi-task and properly execute multiple simultaneous assignments without sacrificing efficiency or quality of the work; Team player willing to work with clients, field staff, other Bureau Veritas offices, and the world wide Bureau Veritas organization.
ILUS - Fabrication & Welding Manager Daifuku Intralogistics AmericaILUS - Fabrication & Welding ManagerHobart, IndianaManages the Fabrication and Welding team, including recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising, and reviewing job contributions; planning and reviewing compensation actions; enforcing policies and procedures. We provide leading‐edge conveyor and sortation systems, voice and light‐directed order fulfillment equipment, controls and software, robotics, mezzanines, and structures.
Senior Materials/Welding Engineer Sargent & LundySenior Materials/Welding EngineerChicago, Illinois$100,019–$152,807 / yearFull timeDescription: The Materials Engineering Group of Sargent & Lundy (S&L) is currently seeking an experienced Materials or Welding Engineer with significant Welding, Nondestructive Examination (NDE), and Quality Control (QC) experience. The position may involve approximately 10-15 % domestic and potential international travel to company locations and related supplier facilities for the purposes of vendor surveillance / expediting, witness of factory testing, and/or inspection activities.
Welding Application Engineer AMADA HOLDINGS CO., LTD. (Inactive)Welding Application EngineerSchaumburg, IL$60,000–$70,000 / yearThis role is critical in helping customers optimize processes, validate applications, and ensure the successful integration of our laser welding solutions into real-world production environments. The ideal candidate brings hands-on experience with fiber laser welding, a strong understanding of metallurgical behavior, and the ability to bridge the gap between advanced technology and customer requirements.
Vocational Lecturer Part-Time Welding City Colleges of ChicagoVocational Lecturer Part-Time WeldingChicago, ILDTI is committed to preparing students to compete in these industries by offering relevant competency to unionized apprenticeships and other relevant trade and utility worker opportunities. Dawson Technical Institute (DTI) is dedicated to providing students with intensive and comprehensive industry validated training in the construction trade and utility industries.
Welding Adjunct - Fall 2026 Elgin Community CollegeWelding Adjunct - Fall 2026Elgin, ILRequired Knowledge, Skills & Abilities: 4000 hours welding experience in industry and welding certification(s) or 2000 hours welding experience with an Associates of Applied Science in Welding Fabrication Technology or Bachelors of Science in Welding Engineering. About ECC: Elgin Community College serves over 9,000 students at every stage of their educational journeys, including university transfer programs, career and technical education, continuing education classes, and adult basic education.
Lab Assistant II - Welding Elgin Community CollegeLab Assistant II - WeldingElgin, IL$34,620–$39,886 / yearAbout ECC: Elgin Community College serves over 9,000 students at every stage of their educational journeys, including university transfer programs, career and technical education, continuing education classes, and adult basic education. As a community, we pride ourselves on nurturing a welcoming campus where every person-students, staff members, faculty members, and campus visitors-feels valued.
1st Shift Welding Plant Supervisor (6:00am 2:30 pm CST) Daifuku Automotive America Corp1st Shift Welding Plant Supervisor (6:00am 2:30 pm CST)Hobart, IN$70,000–$90,000 / yearWe provide leading‐edge conveyor and sortation systems, voice and light‐directed order fulfillment equipment, controls and software, robotics, mezzanines, and structures. Position Summary: The Welding Plant Supervisor (1st Shift 6:00am-2:30pm) supervises activities of the Steel Fabrication-Welding Team, which fabricates conveyor steel products for material handling projects.
Dual Credit Faculty Liaison - Welding Elgin Community CollegeDual Credit Faculty Liaison - WeldingElgin, ILAbout ECC: Elgin Community College serves over 9,000 students at every stage of their educational journeys, including university transfer programs, career and technical education, continuing education classes, and adult basic education. Desired Knowledge, Skills & Abilities: Associate degree in related subject with 4,000 hours documented work experience or, Bachelor's degree in related subject with 2,000 documented work experience.
Welding Instructor - CEWD Faculty - Oakton College Oakton Community CollegeWelding Instructor - CEWD Faculty - Oakton CollegeSkokie, ILLocation: Des Plaines / Skokie, IL Category: Casual Job Type: Part Time Faculty Posted On: Wed May 27 2026 Job Description: Oakton College is seeking a dedicated instructor for a skills course in Welding. Students gain hands-on experience with SMAW and GMAW processes, along with oxy-fuel cutting.
Instructor of Welding and Fabrication - Adjunct Pool McHenry County CollegeInstructor of Welding and Fabrication - Adjunct PoolCrystal Lake, IL$1,129.57–$1,257.21 / yearOur instructors collaborate within the College as discipline experts, helping the College reach its strategic goals through active participation in college committees and by promoting the College to future students throughout our community. Including but are not limited to: Teach the assigned class in accordance with the learning objectives and Concourse syllabus using instructional strategies to engage students.
CTE Teacher- Automotive/Welding Illinois Association of School AdministratorsCTE Teacher- Automotive/WeldingHomewood, ILincluding Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW/MIG), Gas Tungsten Arc Welding (GTAW/TIG), Flux-Cored Arc Welding (FCAW), and Oxyfuel. REQUIRED QUALIFICATIONS: Valid state teaching license/certification in Automotive Technology, Welding Technology, Trade & Industrial Education, or CTE (or eligibility to obtain within one year of hire).
CTE Teacher- Welding Technology Teacher Illinois Association of School AdministratorsCTE Teacher- Welding Technology TeacherHomewood, ILincluding Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW/MIG), Gas Tungsten Arc Welding (GTAW/TIG), Flux-Cored Arc Welding (FCAW), and Oxyfuel. Ensure proper use of personal protective equipment (PPE) including welding helmets, gloves, respirators, and flame-resistant clothing by all students at all times.
Dual Coating & Welding Inspector E2 Consulting Engineers, Inc.Dual Coating & Welding InspectorNaperville, IllinoisFull timeAbout the Organization: E2 Consulting Engineers, Inc. (E2) is a professional services firm established in 1988 specializing in a full spectrum of engineering services including, project engineering and design, federal base operations and infrastructure support services, gas pipeline construction and inspection services, environmental consulting and remediation, and information technology services. Able to perform in both inside and outside environmental conditions in all four seasons throughout the continental United States – extreme cold (temperatures below 32 degrees Fahrenheit) and/or extreme heat (temperatures above 100 degrees Fahrenheit) for periods of more than one hour.
Welding Instruction and Trades Outreach Specialist After School MattersWelding Instruction and Trades Outreach SpecialistChicago, ILFull timeAdministrative and Instructional Management and Support: Lead the planning and instructional facilitation of school-year daytime welding programs as well as after-school and summer programs, expanding access to the welding studio at Lutz. About Us: After School Matters is a Chicago-based nonprofit organization that annually offers after-school and summer programs to nearly 19,000 Chicago high school teens to explore and develop their talents while gaining critical skills that will set them up for success in college and beyond.
Manufacturing Engineer - Welding/Fabrication Dover CorpManufacturing Engineer - Welding/FabricationDowners Grove, ILRemote$130,000–$155,000 / yearSummary: Reporting directly to the Dover Senior Director, Advanced Manufacturing, the Manufacturing Engineer will be responsible for executing the manufacturing roadmap for optimizing Welding/Fabrication processes, proper use of the equipment, design specifications, setup reviews, and new control strategies. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Clean Energy & Fueling, Imaging & Identification, Pumps & Process Solutions and Climate & Sustainable Technologies.
Lab Assistant - Manufacturing, Maintenance and Welding Harper CollegeLab Assistant - Manufacturing, Maintenance and WeldingPalatine, ILAssists in facilitating the successful growth of the Manufacturing, Maintenance, and Welding programs through supporting the Manufacturing, Maintenance, and Welding faculty in the establishment, implementation and ongoing maintenance of MFT/WLD/MNT programs, labs, and equipment. Equipment/Tools Used: CNC machines, welding equipment, drill press, band saw, manual mill, manual lathe, measuring tools, CAD/CAM and verification software, multimeter, etc.
Welding Application Engineer Amada America, Inc.Welding Application EngineerSchaumburg, IL$60,000–$70,000 / yearPart timeThis role is critical in helping customers optimize processes, validate applications, and ensure the successful integration of our laser welding solutions into real-world production environments. The ideal candidate brings hands-on experience with fiber laser welding, a strong understanding of metallurgical behavior, and the ability to bridge the gap between advanced technology and customer requirements.
NDE Welding Inspector - UT/PAUT CB&INDE Welding Inspector - UT/PAUTPlainfield, Illinois$81,125–$100,000 / yearFull timeThrough our two global business units - Storage Solutions, the world leader in tanks, terminals, and storage systems, and Asset Solutions, a leading provider of operations, management, wells and decommissioning services - we combine technical excellence with execution capability to extend asset life, optimize performance, and maximize value. Overview: The NDE Technician/PPL Welding Engineer Technician is responsible for performing welding, NDE, PWHT, machining and other technical functions in the CB&I Welding Technology (CWT) Weld Lab.
Welding Automation Sales Specialist - Great Lakes Territory Illinois Tool Works IncWelding Automation Sales Specialist - Great Lakes TerritoryIL$105,000–$150,000 / yearHOW YOU WILL MAKE AN IMPACT: Effective Communicator: excellent oral and written communication skills, with the ability to clearly connect complex welding concepts to audiences with varying levels of technical expertise. As a Welding Automation Sales Specialist, you will be the expert in the field, leading our teams in the Wisconsin, Illinois, and Indiana area by problem solving, training, and collaborating with customers and distributors.
Adjunct Faculty - Welding Career Link Ivy Tech Community College of IndianaAdjunct Faculty - Welding Career LinkEast Chicago, INPossess an appropriate American Welding Society industry-recognized certifications, certificate or associates degree, in related field needing instruction; Or Possess a Department of Labor, Bureau for Apprenticeship Training recognized journeyman's card in the discipline directly related to credentials, certifications, and competencies listed in the Curriculum of Record (COR); Related field experience based on course; Or Possesses a current Workplace Specialist License granted by the Indiana Department of Education appropriate to course objectives and directly linked to credentials, certifications, and; Possess any specialized certifications, and; Related work experience working in industry. Welding Safety Gas Metal Arc Welding Flux Core Arc Welding Shielded Metal Arc Welding Gas Tungsten Arc Welding Oxy-fuel Welding Robotics Welding Using and interpreting Welding drawings and technical documentation.
Welding Instructor After School MattersWelding InstructorChicago, ILAbout Us: After School Matters is a Chicago-based nonprofit organization that annually offers after-school and summer programs to nearly 19,000 Chicago high school teens to explore and develop their talents while gaining critical skills that will set them up for success in college and beyond. Thirty-five years later, now known as After School Matters, our program has engaged more than 450,000 Chicago teens and is the nation’s largest and most successful provider of after-school and summer programs for high school teens.
Welding Engineer II S&C Electric CoWelding Engineer IIPalatine, IL$87,758–$116,285 / yearS&C provides a comprehensive and competitive benefit package that includes the following (eligibility requirements apply): Health and Welfare Benefits: Medical & Prescription, Dental, Vision, Health Care and Dependent Care Flexible Spending Accounts,, Health Savings Account (HSA), Group Life Insurance, optional Supplemental Life and AD&D Insurance, Wellbeing Resources including Employee Assistance Program and Family Forming Benefits (i.e., Adoption and Fertility support). Today, as the world faces extreme weather events and the demand for electricity grows, S&C continues to innovate and advance the electrical grid, ensuring reliable and resilient power for homes, communities, and critical infrastructure around the world.
1st Shift Fabrication & Welding Manager (5:00am 1:30pm CST) Daifuku Automotive America Corp1st Shift Fabrication & Welding Manager (5:00am 1:30pm CST)Hobart, INResponsibilities include but are not limited to: Manages the Fabrication and Welding team, including recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising, and reviewing job contributions; planning and reviewing compensation actions; enforcing policies and procedures. We provide leading‐edge conveyor and sortation systems, voice and light‐directed order fulfillment equipment, controls and software, robotics, mezzanines, and structures.
Certified Welding Inspector - CWI (Midwest USA) IL, IN, MO, KY PennoniCertified Welding Inspector - CWI (Midwest USA) IL, IN, MO, KYChicago, IllinoisPennoni is currently seeking full-time and part-time AWS Certified Welding Inspectors for fabrication shops that produce bridge and highway products for transportation agencies located in the Chicago, IL; Vincennes, Indiana; Gary, IN; Louisville, KY; St. Louis, MO area: As a 100% employee-owned firm, we continually strive to build a great workplace where our employees trust the people they work for, enjoy the people they work with, and take pride in what they do.
Automated Welding Operator (CNC / Laser) German American Chambers of CommerceAutomated Welding Operator (CNC / Laser)Lombard, IL$30–$35This is a hands-on, shop-floor role for someone who enjoys working directly with advanced machinery, learning new technology, and producing high-quality welds for customers in high-stakes industries. The Automated Welding Operator operates and programs automated welding equipment at pro beam USA, with a primary focus on electron beam (EB) welding systems.
Robotics & Welding Engineer (Chicago Based), OpEx Service LLC On Point HoldingsRobotics & Welding Engineer (Chicago Based), OpEx Service LLCChicago, IllinoisThe Robotics & Welding Field Service Engineer (Engineer II) is responsible for installing, commissioning, troubleshooting, repairing, and optimizing robotic welding and automated manufacturing systems at customer facilities. The Service Engineer functions as the company’s on-site technical representative and is responsible for restoring equipment operation, supporting customer production, and maintaining system reliability.
NewLight Industrial - Welder TriceHealthcareLight Industrial - WelderAurora, ILBasic computer literacy using Microsoft Windows• Basic math skills and ability to use basic measurement equipment (ruler, scale, calipers, tape measure).• PRODUCTION TIG WELDER IIThe responsibilities of the TIG Welder are: Lay out, measure, and align metal work pieces prior to welding using straightedges, rules, and calipers.
Welder ProLogistixWelderBatavia, IL$24–$26 / hourAdditional benefits information can be found here: https://www.prologistix.com/employees/benefits/ . This role involves performing a variety of welding processes—including manual welding, layout welding, orbital welding, and tack welding .
Welder (Level I, II, III) Sterling Engineering, Inc.Welder (Level I, II, III)Skokie, IL$28–$38 / hourSterling Engineering is partnering with a new client in the North Chicagoland suburbs to hire experienced Welders (Levels I–III) for their growing team in Skokie, IL. This organization is part of a global industrial manufacturing group and produces highly engineered products used in demanding industrial applications.
NewWelder II (1:00pm to 9:30 pm) 2nd shift G&W Electric CoWelder II (1:00pm to 9:30 pm) 2nd shiftBolingbrook, IL$27–$30 / hourAssemble, align, square up, fit, stiffen and tack weld a variety of subassemblies and assemblies of moderate to advanced complexity using B/Ms, steel tape, straight edge, squarer, clamps, jacks fixtures, templates and similar equipment. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success.
Welder (2nd shift) GpacWelder (2nd shift)Bartlett, IL26–30GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990. Perform MIG, TIG, Flux-Core, and Stick welding on steel, stainless steel, and aluminum components.
Weld Shop Manager (Lead Welder) Aegis Manufacturing & EngineeringWeld Shop Manager (Lead Welder)Roselle, IL$65,000–$90,000 / hourA well-established custom industrial equipment manufacturer is seeking a hands-on Weld Shop Manager (Working Lead) to oversee a team of welders while remaining actively involved on the shop floor. You'll spend the majority of your time leading by example—fabricating, TIG welding, mentoring less experienced welders, ensuring quality, and helping keep production on schedule.
Welder Total Staffing SolutionsWelderElk Grove Village, ILAssociate can report any hazards and concerns to the Illinois Department of Labor by call the Department s Day and Temporary Labor Services Act toll-free hotline at 1-877-314-7052 or email at DOL.DayLabor@illinois.gov. A growing industrial radiator manufacturing company in Elk Grove Village is seeking an experienced Aluminum Welder to join their 1st shift team.
Welder (MP#337208) Barton Staffing SolutionsWelder (MP#337208)Elk Grove Village, ILHiring: Aluminum MIG/TIG Welders (Temp-to-Hire) Location: Melrose Park Status: Full-Time (Temp-to-Hire) Urgency: High (Immediate Openings) . Available Shifts & Schedules: We are currently hiring for 2nd Shifts to meet our production goals: 2nd shift: 2:30pm-11:00pm (Mon-Fri) Saturdays: 12:00pm-5:00pm PM (as required).
Non-Craft Welder HRT SolutionsNon-Craft WelderGary, INFull timeEnvironment: Requires more than 2/3 of the time working near moving mechanical parts, and being exposed to fumes, airborne particles and outdoor weather conditions; 1/3 to 2/3 of the time in wet or humid conditions, in extreme heat or cold, and exposed to toxic or caustic chemicals; and less than 1/3 of the time in an office setting, in high places, at risk of electrical shock and near vibration. Responsible for all welding duties throughout the shop utilizing types of welders including but not limited to MIG welders, arc welders and plasma cutting torches to perform all aspects of welding duties both within the welding shop and throughout the.