JAG Marine GroupNewMarine Structural Welder Aluminum JAG Marine GroupMarine Structural Welder AluminumSeattle, WA$30–$35 / hourTasks require repetitive sequences that include balancing, climbing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, finger manipulation, grasping, feeling, seeing, hearing, speaking, an acute sense of smell and exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects and/or lift objects. This position requires working in inside and/or outside environmental conditions, shipyard and/or remote locations, teams in opens spaces, heights above 6 feet, and/or alone in confined spaces.
Blue Origin LLCSenior Materials and Process Engineer - Welding Blue Origin LLCSenior Materials and Process Engineer - WeldingSeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Terracon Consultants, Inc.Certified Welding Inspector / NDT Technician - $2,000 Signing Bonus! Terracon Consultants, Inc.Certified Welding Inspector / NDT Technician - $2,000 Signing Bonus!Lynnwood, WAFull timeTerracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 8,000 curious minds focused on solving engineering and technical challenges from more than 200 locations nationwide. General Responsibilities: Construction Inspectors spend the majority of their time working on projects performing construction related inspection requiring specific certifications and/or experience.
TerraPowerMaterials Testing Engineer - Welding & Mechanical Testing TerraPowerMaterials Testing Engineer - Welding & Mechanical TestingEverett, WA$117,922–$176,883 / yearFull timeTerraPower is seeking to hire highly motivated and forward-thinking professionals who are interested in focusing on advanced nuclear reactor research and development and influencing change within the nuclear power landscape and bringing forward the critical production of medical isotopes. As a result, the companys activities in the fields of nuclear energy and related sciences are yielding significant innovations in the safety and economics of nuclear power, hybrid energy and medical applications all for significant human health benefits.
Company ConfidentialCalling all Welders! Company ConfidentialCalling all Welders!Bremerton, WA$54,000–$83,200Full timeThe selected Welders will be supporting our Systems Integrations department working on active class submarines, surface ships, and shore-based communication facilities using various mechanical tools to install, upgrade and remove industrial equipment to assist with alterations and installations. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals.
ASSA ABLOYMIG Welder ASSA ABLOYMIG WelderKent, WA$23.80–$25.87 / hourFull timeWe are the ASSA ABLOY Door Group and we are the global leader in access solutions helping billions of people experience a more open world. We are currently recruiting for Welders of all levels of experience for our Northwest Service Center located in Kent, Washington.
VerstelaWelder VerstelaWelderRedmond, WA$27.49–$27.49 / hourFull timeAs part of the fabrication team, you'll build custom pieces of equipment and fabricate essential parts in their huge worksite—you'll be surrounded by and working with state-of-the-art equipment that is all provided for you! This is a full-time, temporary-to-hire job that offers excellent benefits upon permanent hire, a compressed 4-day workweek, and a great starting pay!
SAFE Boats, InternationalAluminum Welder 3 SAFE Boats, InternationalAluminum Welder 3Bremerton, WA$30–$35 / hourFull timeWith a record backlog of high performance, aluminum boats to build for the military and first responders, SAFE Boats need experienced Aluminum Welders/Fabricators to apply their expertise to our amazing products. The Welder/Fabricator 3 uses welding and other tools and equipment to join metal components or to fill holes, indentations, or seams of fabricated metal to build boats.
SAFE Boats, InternationalAluminum Welder 4 SAFE Boats, InternationalAluminum Welder 4Bremerton, WA$33–$38 / hourFull timeJOB SUMMARY: The Welder/Fabricator 4 uses welding and other tools and equipment to join metal components or to fill holes, indentations, or seams of fabricated metal to build boats. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc & plasma arc.
DeZurik Inc.Welder Fabricator II DeZurik Inc.Welder Fabricator IIRedmond, WAFull timeMust have an understanding of the use of various types of equipment and tools common to the welding trade (e.g., mig welder, tig welder, oxyacetylene torch, arc welder, plasma cutter, saw, drill press, grinder, etc.). When working occasionally in some shop areas, personal protection equipment (PPE) will be recommended and/or required (safety shoes, safety glasses w/side shields, hearing protection, face shield, gloves, apron and boots).
QED SystemsMarine Welder QED SystemsMarine WelderPORT ORCHARD, WA$26–$30 / hourFull timeCandidate must be able to join metal components together through the process of welding or brazing in both shop and shipboard environments, lay out work to be accomplished, select materials required to accomplish removals / installations / repairs / alterations, and cut / burn / grind surfaces (as directed). Job Requirements/skill sets: Experienced (5+ years) Marine Welder with a complete understanding of production processes and specialty trades functions and tools.
Valkyrie EnterprisesWelder II (Job ID: 4046) Valkyrie EnterprisesWelder II (Job ID: 4046)Silverdale, WAFull timeIf position requires travel by domestic flight or access to secure federal facilities/military bases, candidate must be able to obtain (by start of position) and maintain appropriate identification credentials, such as REAL ID. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
Valkyrie EnterprisesWelder II (Job ID: 4179) Valkyrie EnterprisesWelder II (Job ID: 4179)Silverdale, WAFull timeIf position requires travel by domestic flight or access to secure federal facilities/military bases, candidate must be able to obtain (by start of position) and maintain appropriate identification credentials, such as REAL ID. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
Parker Hannifin CorporationExperienced TIG Welder (Aftermarket Aerospace) - Swing Shift Parker Hannifin CorporationExperienced TIG Welder (Aftermarket Aerospace) - Swing ShiftWoodmont Beach, WA$24.85–$33.30 / hourFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Parker Hannifin CorporationExperienced TIG Welder (Aerospace) - Swing Shift Parker Hannifin CorporationExperienced TIG Welder (Aerospace) - Swing ShiftKent, WA$24.85–$33.30 / hourFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Parker Hannifin CorporationNewExperienced TIG Welder (Aftermarket Aerospace) Parker Hannifin CorporationExperienced TIG Welder (Aftermarket Aerospace)Woodmont Beach, WA$24.85–$33.30 / hourFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Belcan CorpTIG Welder Belcan CorpTIG WelderKent, WAFull timeLocation: Kent, WAArea Code: 253ZIP Code: 98032Start Date: Right AwayKeywords: #AerospaceWelderJobs; #Kentjobs;Shift: 2 swing shifts and Two 4-day shifts available4x10s (Mon-Thurs)Schedule: Swing: 2:30pm - 1am, (10-hour shifts Mon- Thurs).Schedule: Day shift could vary but likely an early start at 3:30am or 4am (10-hour shifts Mon- Thurs). Successfully complete the Exotic Metals TIG weld training program and/or have equivalent experience.* Hold multiple, basic Exotic Metals weld qualification/certifications, including Fillet Welding as required.*
Tradesmen InternationalShop Welder Tradesmen InternationalShop Weldermountlake terrace, WA$29–$29 / hourFull timeDuties: * Develops welding projects by analyzing work orders, prints, and completed assembly; calculating requirements; studying metals; determining appropriate welding techniques. * Fabricates components by using equipment to clean, prepare, cut, burn, and weld pieces; setting-up and measuring assemblies; selecting appropriate method.
22nd Century Technologies, Inc.Aerospace TIG Welder - Experienced 22nd Century Technologies, Inc.Aerospace TIG Welder - ExperiencedKent, WA$21.55–$38 / hourFull timeWith a strong focus on the public sector, 22nd Century currently holds government contracts with 14 out of 15 Federal Executive agencies including DoD, 37 other Federal agencies, 50 States, 115+ Local agencies, and 37 School Districts. As part of our unrelenting focus on quality and compliance, 22nd Century Technologies’ delivery is based on Certified Matured Processes including CMMI L3 Dev & SVC, ISO 20000, ISO 27001, and ISO 9001 quality processes.
Airgas USA LLCWelder Repair Technician Airgas USA LLCWelder Repair TechnicianWoodinville, WAFull timeThis is evident not only through our competitive compensation but also through a comprehensive benefits package that includes medical, dental, and vision plans, short-term and long-term disability, life and accidental death and dismemberment (AD&D) insurance, Employee Assistance Program (EAP), pre-tax commuter transportation benefit, parental leave, vacation, sick time, floating holidays, jury duty and funeral/bereavement leave, and paid holidays for all eligible full-time employees. Airgas, an Air Liquide company, is a leading U.S. supplier of industrial, medical and specialty gases, as well as hardgoods and related products; one of the largest U.S. suppliers of safety products; and a leading U.S. supplier of ammonia products and process chemicals.
Blue Origin LLCLaser Operator - Welder (Multiple Shifts) Blue Origin LLCLaser Operator - Welder (Multiple Shifts)Seattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
EnduranceNewWelding & Fabrication Specialist EnduranceWelding & Fabrication SpecialistSeattle, WAYou'll gain hands-on experience with GTAW and handheld laser welding of stainless steel, nickel alloys, and titanium while helping us manufacture the world's first subsea geothermal power plant. As a welder at Endurance Energy, you'll work alongside engineers to develop welding processes, fabricate novel heat exchanger designs, and develop repeatable manufacturing processes.
Bee Talent SolutionsWelding Engineer Bee Talent SolutionsWelding EngineerBellevue, WA$63–$80 / hourThis role will work as part of a high functioning team of engineers focused on materials processing, supply chain development and supplier qualification for next generation material and components for sodium-cooled fast reactors. Oversee test programs for qualification of welds such as mechanical properties, burst testing, thermal creep, creep-fatigue, neutron irradiation, thermal aging, and sodium exposure.
AllegionWelding Department Strider AllegionWelding Department StriderSnoqualmie, WA$23–$30.24 / hour40+ hours per week will typically be necessary to accomplish performance objectives and to provide satisfactory job presence and/or responsiveness **What You'll Get from Us:** + Immediate health, dental and vision insurance coverage, helping you "be safe, be healthy" (https://www.allegion.com/corp/en/careers/culture.html#serve) + Wellness incentives, such as up to $1000 HSA contributions depending upon participation. There is a frequent need to stand, stoop, walk, twist, bend, lift and move heavy objects (up to 70 pounds) and occasionally lift and move very heavy objects (up to 100 pounds) and perform other similar actions during the course of the work day.
AllegionFrontline Leader (Welding) AllegionFrontline Leader (Welding)Snoqualmie, WA$27–$51.25 / hourThere is a frequent need to stand, stoop, walk, twist, bend, lift and move heavy objects (up to 70 pounds) and occasionally lift and move very heavy objects (up to 100 pounds) and perform other similar actions during the course of the workday. This role works closely with welding employees and collaborates with the day/swing shift Supervisors and Frontline Leaders for seamless continuation of activities and administrative support to reach production goals.
Allegion PlcWelding Department Strider Allegion PlcWelding Department Stridersnoqualmie, WA$20.87–$30.24 / hourThere is a frequent need to stand, stoop, walk, twist, bend, lift and move heavy objects (up to 70 pounds) and occasionally lift and move very heavy objects (up to 100 pounds) and perform other similar actions during the course of the work day. This Material Strider reports to our Welding Supervisor and is responsible for verifying the correct materials and quantities are supplied to the welding team to keep production flowing efficiently and on-time.
ProtingentWelding Engineer ProtingentWelding EngineerBellevue, WA$65–$85 / yearAbout Protingent: Protingent is an Award-Winning provider of top-tier Engineering and IT talent, trusted by companies at the forefront of innovation — from Software and Aerospace to AI, Clean Tech, Medical Devices, and Connected Technologies. Oversee test programs for qualification of welds such as mechanical properties, burst testing, thermal creep, creep-fatigue, neutron irradiation, thermal aging, and sodium exposure.
Sound Resource Group IncStructural/Aluminum (MIG) Welders Needed for Seattle WA Shipyard Sound Resource Group IncStructural/Aluminum (MIG) Welders Needed for Seattle WA ShipyardSeattle, WA$30–$34 / hourJob Description: Venture Dynamics is seeking skilled Structural/Aluminum (MIG) Welders to join our team, specializing in NAVSEA welding projects within shipyards. Position Overview: This role requires a proactive and detail-oriented professional to engage in Structural and Aluminum (MIG) Welder tasks, ensuring excellence in every aspect of the job.
SAFE Boats InternationalNewWelder/Fabricator/Aluminum 3 - Experienced SAFE Boats InternationalWelder/Fabricator/Aluminum 3 - ExperiencedBremerton, WAWhy we need you and what you'llbe responsible for: With a record backlog of high performance, aluminum boats to build for the military and first responders, SAFE Boats need experienced Aluminum Welders/Fabricators to apply their expertise to our amazing products. The Welder/Fabricator 3 uses welding and other tools and equipment to join metal components or to fill holes, indentations, or seams of fabricated metal to build boats.
AllegionFinish Welder AllegionFinish WelderSnoqualmie, WA$27–$30.24 / hourThis year, Allegion also received Gallup's With Distinction honor - a designation reserved for a select group of organizations that go above and beyond in building exceptional workplace cultures._ **Finish Welder - Technical Glass Products - Snoqualmie, WA** Allegion is seeking a Production Finish Welder to fulfill a full-time position in Snoqualmie, WA at our Technical Glass Products facility. With more than 40 brands, 14,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond._ _Additionally, Allegion is proud to be recognized with the 2026 Gallup Exceptional Workplace Award (GEWA) for the third consecutive year, earning distinction in both the employee engagement and strengths categories.
Federal SignalProduction Line Welder I Federal SignalProduction Line Welder ISnohomish, WA$22–$26 / hourAs a Welder on our growing Production Line, you are contributing to the success of the company by safely and efficiently welding, cutting, and brazing metal pieces and products using flame-cutting and hand welding equipment on dump trucks, trailers, and parts. Aluminum experienced encouraged + 1-2 years of Fabrication with Welding & Layout experience + 1-2 years of Mechanical experience with Hydraulics (preferred) Physical Requirements: + Must be able to weld components that are vertical, flat, or overhead.
Federal SignalProduction Line Welder II Federal SignalProduction Line Welder IISnohomish, WA$22–$30 / hourHigh School Graduate (preferred) + 1 - 4 years of Experience with wire feed welding Steel & Aluminum experience + 1-3 years of Fabrication with Welding & Layout experience + 1-3 years of Mechanical experience with Hydraulics (preferred) Physical Requirements: + Must be able to weld components that are vertical, flat, or overhead. As a Welder II on our growing Production Line, you are contributing to the success of the company by safely and efficiently welding, cutting, and brazing metal pieces and products using flame-cutting and hand welding equipment on dump trucks, trailers, and parts.
GraviticsNewAerospace Aluminum Welder (TIG) GraviticsAerospace Aluminum Welder (TIG)Seattle, WA$35–$40 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. The work includes operating mechanized welding systems, fabricating tooling, handling raw materials, and supporting shop operations in a fast‑paced environment where quality and safety are essential.
L3HarrisFabrication D (TIG Welder) L3HarrisFabrication D (TIG Welder)Redmond, WA$30.05–$56.01 / hourThis position is responsible for welding various metals of Company products, fixtures, test stands, industrial structures, tooling and related equipment, components and product parts by using available welding processes including manual fusion welding and by mechanized or automated processes, including laser, in-place-tube, to do longitudinal and circumferential welding of assemblies. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) .
Tradesmen International, Inc.Pipe Welder Tradesmen International, Inc.Pipe WelderSEATTLE, WAIf in doubt, pleasecall or visit your closest Tradesmen office (https://www.tradesmeninternational.com/directory/) to verify the request. **Location** US-WA-SEATTLE **Posted Date** _3 months ago_ _(3/19/2026 3:59 PM)_ **_Req ID_** _2026-365988_ **_Category_** _Welder - Flat_ **_Travel_** _No_ **_Location_** _US-WA-SEATTLE_
SAFE Boats InternationalNewWelder Helper SAFE Boats InternationalWelder HelperBremerton, WA$20–$24 / hourWith a record backlog of high performance, aluminum boats to build for the military and first responders, SAFE Boats needs committed, passionate go-getters who hope to pursue a career in welding and are looking for an opportunity to get their start working for one of the best boat builders in the industry. You will perform supporting tasks to maximize the efficiency and productivity of more experienced welders/fabricators by ensuring that the proper parts and materials are set up to be welded and/or fabricated within the production environment.
J&D's Hydraulic and Repair Co.NewWelder/fabricator J&D's Hydraulic and Repair Co.Welder/fabricatorAuburn, WALays out, positions and secures parts and assemblies according to specifications, using straightedge, combination square, calipers, and tape measure, etc.• Tack welds or welds components and assemblies, using electric, gas, arc, or other welding equipment.• Qualifications• Must be a minimum of 18 years of age or older• Must pass pre-employment assessment(s) of welding capabilities• Understand, read and write communications• Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Crane Aerospace & ElectronicsProduction Assembler (Hipot Tester - Spot Welder) Crane Aerospace & ElectronicsProduction Assembler (Hipot Tester - Spot Welder)Lynnwood, WAAbilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in a moderate to high paced work environment in a high volume setting. + Skills: Strong verbal and written communication; Proficiency in reading comprehension (understanding written sentences and paragraphs in work related documents) of the English language; Basic computer skills (understanding of basic software).
PEAK Technical Services Inc.Tig Welder PEAK Technical Services Inc.Tig WelderKent, WA$21–$24 / hourPerform physical activities requiring considerable use of arms and legs and frequent movement of the whole body, such as climbing, lifting up to 50 pounds, balancing, and handling material. Apply basic welding processes to join sheet metal aircraft components as specified by instructions, weld schedules, and drawings.
First Tek, Inc.Tig Welder (1st & Swing Shift) First Tek, Inc.Tig Welder (1st & Swing Shift)Kent, WAThe welder performs physical activities that require considerable use of arms and legs and frequent movement of the whole body, such as climbing, lifting up to 50 pounds, balancing and handling of material. Level 1: Applies basic welding processes to join sheet metal aircraft components as specified by written instructions, weld schedules and drawings.
First Tek, Inc.Tig Welder (Swing & Day Shifts) First Tek, Inc.Tig Welder (Swing & Day Shifts)Kent, WAThe welder performs physical activities that require considerable use of arms and legs and frequent movement of the whole body, such as climbing, lifting up to 50 pounds, balancing and handling of material. Applies advanced welding processes to join sheet metal aircraft components as specified by written instructions, weld schedules and drawings.
PEAK Technical StaffingTig Welder PEAK Technical StaffingTig WelderKent, WA$21–$24 / hourCandidate Privacy To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://peaktechnical.com/privacy-policy/and https://peaktechnical.com/ca-residents-privacy-rights/ Perform physical activities requiring considerable use of arms and legs and frequent movement of the whole body, such as climbing, lifting up to 50 pounds, balancing, and handling material.
Peak Technical Staffing USANewTig Welder Peak Technical Staffing USATig WelderKent, WAKent, WA, is a vibrant community located in the heart of the Seattle metropolitan area, known for its diverse culture, thriving industries, and beautiful parks. Physical RequirementsPerform physical activities requiring considerable use of arms and legs and frequent movement of the whole body, such as climbing, lifting up to 50 pounds, balancing, and handling materials.
Delphinus EngineeringNewWelder Delphinus EngineeringWelderSeattle, WA$22.25–$43 / hourSummary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer).
General Dynamics Information TechnologyWelder General Dynamics Information TechnologyWelderSeattle, WA$25.50–$34.50 / hourReq ID:** RQ212303 **Type of Requisition:** SCA **Clearance Level Must Be Able to Obtain:** None **Public Trust/Other Required:** None **Job Family:** SCA **Skills:** Blueprints,Welding,Welding Procedures **Experience:** 1 + years of related experience **US Citizenship Required:** Yes **Job Description:** Welder, Combination, Maintenance This is a waterfront shipboard construction and re-modernization position, working within shipyards and drydocks onboard U.S. Naval ships. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available.
TERRA Staffing GroupNewTIG Welder | Direct Hire TERRA Staffing GroupTIG Welder | Direct HireKent, WA$21.55–$35 / hourIn this TIG welder role, you will perform routine and advanced TIG welding on aerospace assemblies that support critical aircraft operations. If you are looking to build long-term skills in a stable, high-demand industry, this TIG welder position is a great opportunity.
Gary Merlino Construction GroupNewCertified Welder Gary Merlino Construction GroupCertified WelderSeattle, WACertified Welder Seattle, Washington · 35-45 per hour Apply Now Gary Merlino Construction Co., Inc is a privately held locally owned and operated general contractor specializing in heavy civil construction. Ideal candidates have steel and aluminum fabrication experience, mechanical experience including electrical and troubleshooting, or with 5+ years of related work history.
US Marine CorpsNewWELDER LEADER (EXPERT) US Marine CorpsWELDER LEADER (EXPERT)Everett, WAYou will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program. You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
General Dynamics Land SystemsNewWelder 1/Class-Bremerton General Dynamics Land SystemsWelder 1/Class-BremertonBremerton, WA$29.61–$38.87 / hourAssures that any other safety issues are complied with that relate to the specific job being accomplished (Example: special staging, face shields for grinding, protective clothing for hot work-related jobs, breathing apparatus with correct cartridges, etc). The Welders are responsible for accomplishing work in accordance with work specifications safely, with the highest quality and in a professional manner.
Tradesmen International, Inc.Structural Welder Tradesmen International, Inc.Structural WelderBremerton, WAAll position fillet and butt welds using the following processes: SMAW Shielded Metal Arc Welding, GMAW Gas Metal Arc Welding, FCAW Flux Cored Arc Welding and GMAWP Pulse Arc Welding + Using Oxygen/Propane heating torch + Air Carbon Arc Gouging + Use fillet and butt weld gauges **Requirements:** + OSHA 10; may be provided to qualified candidates + 4+ year NNS or Naval shipyard experience + Must pass various weld test + Experience working in a physically demanding environment shipboard sub-assemblies ladders staging etc **Company Details** Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. **Location** US-WA-Bremerton **Posted Date** _5 months ago_ _(1/13/2026 2:27 PM)_ **_Req ID_** _2026-365450_ **_Category_** _Marine Trades - Marine_ **_Travel_** _Yes_ **_Job Board_** _SPS Team_ **_Location_** _US-WA-Bremerton_