434 Results for

1st Shift Manufacturing Jobs in Times Square, WA

Jobs

New!

Kent, WA3 days ago

As the largest wire manufacturer in the Western United States, our impressive range of products are used in a wide variety of fields, including agriculture, construction, transportation, communications, and industrial applications. The Shipping and Receiving position is responsible for ensuring that finished products are shipped to the Company’s customers in a timely and cost-effective manner and unloads raw materials.

Renton, WA29 days ago

Full-time
Employee

With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.

New!

Kent, WA3 days ago

As the largest wire manufacturer in the Western United States, our impressive range of products are used in a wide variety of fields, including agriculture, construction, transportation, communications, and industrial applications. Our belief in our people and their capabilities drives our decentralized structure, which fosters entrepreneurship — a key driver of our long-term growth.

New!

Seattle, WAToday

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.

New!

Kent, WA5 days ago

As the largest wire manufacturer in the Western United States, our impressive range of products are used in a wide variety of fields, including agriculture, construction, transportation, communications, and industrial applications. Our belief in our people and their capabilities drives our decentralized structure, which fosters entrepreneurship — a key driver of our long-term growth.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Hands on experience in hardware manufacturing (i.e. tight tolerance assembly, leak testing, final acceptance testing of integrated hardware, and castings, forgings, additively manufactured components, welding, machining, cleaning, non-destructive testing methods, Manufacturing Execution Systems/Software).

Woodinville, WA30+ days ago

$29.64–$29.65 Per Hour
Full-time
Employee

Manufacturing Production Workers focus on setting up, operating, maintaining, and troubleshooting manufacturing production (i.e., machining, processing, assembly, or packaging) equipment including Moving, packing, and sorting raw materials or finished goods. Load & Unload racks of parts, mask and unmask parts, touchup/rework, process rejects, inspect parts coming down lines, operates a hoist where necessary.

Renton, WA15 days ago

Full-time
Employee

E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance.

Renton, WA30+ days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. Strong communication and interpersonal skills, both written and verbal, with the ability to communicate effectively with a diverse community of customers and employees at all levels.

Redmond, WA18 days ago

Job Title: Manufacturing Technician D Job Code: 37677 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) .

Renton, WA19 days ago

Full-time
Employee

With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. If you enjoy detail-oriented work, thrive in a hands-on environment, and want to be part of an industry built on precision and innovation, we want to hear from you. 1st Shift Schedule:

Renton, WA15 days ago

Full-time
Employee

seeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Woodmont Beach, WA30+ days ago

Full-time
Employee

Follow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Renton, WA30+ days ago

Full-time
Employee

Experience in Manufacturing Engineering Planning systems such as Product Data Manager (PDM), Computer Aided Process Planning (CAPP), Reference Engineering Data Automated Retrieval System (REDARS), and Wire Integration Retrieval System (WIRS). This role will require collaboration with a cross-functional electrical team, which includes Manufacturing Engineers, Design Engineers, and Shop Investigators, tasked with investigating and resolving emergent factory producibility issues.

Crystal Mountain, WA30+ days ago

$22.45–$27.25 Per Hour
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Our Purpose - Enabling Engineering Breakthroughs that Lead to a Better Tomorrow - comes to life through our people-first culture where teamwork drives performance, inclusion fuels innovation and growth is encouraged.

Woodmont Beach, WA30+ days ago

Full-time
Employee

This position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in the facility. Prioritizes and processes orders from certification department; verifies documentation is complete and places orders in the proper area for shipping via Hytek truck or common carrier.

Renton, WA30+ days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Renton, WA30+ days ago

Full-time
Employee

Bonney Lake, WA30+ days ago

$21.75–$25.75 Per Hour
Full-time
Employee

Renton, WA30+ days ago

Full-time
Employee

Bonney Lake, WA30+ days ago

Full-time
Employee

Renton, WA19 days ago

Full-time
Employee

Redmond, WA30+ days ago

$27.40–$49.04 Per Hour

Job Title: Manufacturing Technician C Job Code: 36935 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) .

Bonney Lake, WA30+ days ago

$21.75–$25.75 Per Hour
Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to takt time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.

Renton, WA30+ days ago

Full-time
Employee

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.

Renton, WA19 days ago

Full-time
Employee

The Assembler works according to task time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Follow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

Woodmont Beach, WA15 days ago

Full-time
Employee

Woodmont Beach, WA15 days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

l learn a range of techniques and tools for polishing parts including the use of wheel lathes, Dynafiles, and various hand tools to achieve customer driven visual requirements, most often to achieve a grain finish appearance. *FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Woodmont Beach, WA30+ days ago

Full-time
Employee

Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. The Flight test Manufacturing Engineer is an assembly and installation engineer within Boeing Test and Evaluation (BT&E) that supports installation planning by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and supports during the build/installation.

Algona, WA17 days ago

Full-time
Employee

During the first year of service, hired applicants will earn Paid Time Off in the form of Vacation and Flex PTO at the accrual rate of 1 hour for every 30 hours worked, earning a maximum of 40 hours of Vacation and 40 hours of Flex PTO, for a combined maximum total of 80 hours. Tim's Cascade Snacks, a subsidiary of Utz Quality Foods is looking to grow our loyal, career driven, and customer focused team, and is currently recruiting for a Lineperson to work from our manufacturing facility located in Algona, WA on 1st Shift.

Algona, WA30 days ago

Full-time
Employee

During the first year of service, hired applicants will earn Paid Time Off in the form of Vacation and Flex PTO at the accrual rate of 1 hour for every 30 hours worked, earning a maximum of 40 hours of Vacation and 40 hours of Flex PTO, for a combined maximum total of 80 hours. Tim's Cascade Snacks, a subsidiary of UTZ Quality Foods is looking to grow our loyal, career driven, and customer focused team, and are currently recruiting for a Packer to work 1st Shift for our manufacturing facility in Algona, WA.

Seattle, WA30+ days ago

Full-time
Employee

Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration, build plan, and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. Required SkillS: * Bachelor, Master or Doctorate of Science degree required from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry is required.

Redmond, WA30+ days ago

$22.83–$42.54 Per Hour

Job Title: Manufacturing Technician B Job Code: 36929 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) .

Redmond, WA30+ days ago

Full-time
Employee

We design and manufacture advanced specialty vehicles-including fire, ambulance, and recreational vehicles-alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry. Through our global dealer, parts and service network and true value-creating digital solutions, we deliver best-in-class lifecycle support, helping customers maximize return on investment.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Redmond, WA30+ days ago

Full-time
Employee

Redmond, WA30+ days ago

Full-time
Employee

The Senior Manufacturing Engineer - Design for Automation (DFA) is responsible for enabling automationready, scalable, and repeatable manufacturing solutions for Genie products by leading DFA efforts upstream through New Product Development (NPD) and supporting robust execution across Manufacturing Engineering and Manufacturing Technical Services (MTS). Genie Industries, a business segment of the Terex Corporation, is headquartered in Bothell, WA with branch offices worldwide; we manufacture material lifts, aerial work platforms, trailer-mounted booms and light towers, telehandlers, scissor lifts and self-propelled telescopic and articulating booms.

Mill Creek, WA28 days ago

Full-time
Employee

Execute the day-to-day production of the Company's consumables to meet customer demand* Collaborate with manufacturing engineers to identify, troubleshoot, and resolve system or process excursions* Perform complex, mechanical assembly and quality inspection of products according to established specifications* Ensure the on-time delivery of high value, time-sensitive material to both vendors and customers* Maintain a clean, safe, and orderly work area* Other duties as assigned. or B.S. degree in STEM discipline* 2-10 years of experience working in a high-tech manufacturing setting either in a technician or production control capacity* Experience operating within Enterprise Resource Planning (ERP) and Manufacturing Execution Systems (MES)* Ability to run predefined recipes on CVD chambers, liquid handles, ovens, and imaging systems.

Renton, WA30+ days ago

$100–$135 Per Hour
Full-time
Employee

Capable of designing or defining the requirements for the development of equipment, robotics, Lay-up molds, Vacuum Holding Fixtures, Shop Aids, Positioning fixtures, Go-No-Go inspection tools required for the manufacturing of new products. Essential Functions: Essential functions, including how an individual is to perform them and the frequency with which the tasks are performed; the tasks must be part of the job function and truly necessary or required to perform the job.

Kent, WA30+ days ago

$77,968–$130,228 Per Year
Full-time
Employee

Hexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.

Renton, WA30+ days ago

Full-time
Employee

This responsibility encompasses the entire R&D manufacturing value chain, including, but not limited to, Design for Manufacturability work, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and documentation associated with the processes that the Manufacturing Engineer oversees. Pay ranges may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets.

Redmond, WA30+ days ago

$20.52–$34.20 Per Hour
Intern
Full-time

With our wide range of technologies, including in the clean tech space, we help our customers solve their most complex engineering challenges by living our purpose: enabling engineering breakthroughs that lead to a better tomorrow. Our Purpose - Enabling Engineering Breakthroughs that Lead to a Better Tomorrow - comes to life through our people-first culture where teamwork drives performance, inclusion fuels innovation and growth is encouraged.

Woodmont Beach, WA18 days ago

$83,250–$138,550 Per Year
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.

Kent, WA30+ days ago

$77,968–$117,324 Per Year
Full-time
Employee

Redmond, WA30+ days ago

Full-time
Employee

We design and manufacture advanced specialty vehicles-including fire, ambulance, and recreational vehicles-alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry. Develop and evaluate Engineering Change Request (ECR)/Engineering Change Notice (ECN)/Special Manufacturing Instruction (SMI) proposals/processes for production, including design improvements, and prototyping.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 1st Shift Manufacturing job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

1st Shift Manufacturing Jobs in Times Square, WA

Shipping 1st Shift M-F 7am to 3:30pm Davis Wire Corporation

Advanced Composites Manufacturing Lead - 1st Shift Sekisui Aerospace

Machine Operator 2nd Shift - Davis Wire Corporation - Kent, WA Davis Wire Corporation

Manufacturing Engineer II, III, Sr (Multiple Shifts) - Lunar Blue Origin LLC

Machine Operator 2nd Shift - Davis Wire Corporation - Kent, WA Davis Wire

Manufacturing Engineer - Rocket Engines Valves (Weekend Shift) Blue Origin LLC

Production Associate, 1st Shift PPG Industries, Inc.

Aerospace Production - Laminator I - 1st Shift Sekisui Aerospace

Production Supervisor 1st Shift Sekisui Aerospace

Manufacturing Technician D - 1st Shift 1 L3Harris

Aerospace Production - Kit Cutter I - 1st Shift Sekisui Aerospace

Aerospace Manufacturing Production Worker - All Shifts Sekisui Aerospace

Aerospace Anodize Operator - 1st Shift Hytek Finishes

Manufacturing Planner 3 Spectraforce Technologies Inc.

Material Handler - 1st Shift Parker Hannifin Corporation

Shipping Clerk and Back Up Driver - 1st Shift Hytek Finishes

Trimmer II - 1st Shift Sekisui Aerospace

Laminator I- 1st Shift Sekisui Aerospace

Laminator I, 1st Shift Sekisui Aerospace

Laminator II - 1st Shift Sekisui Aerospace

Trimmer I, 1st Shift Sekisui Aerospace

Kit Cutter I - Weekend 1st Shift Sekisui Aerospace

Manufacturing Technician C - 1st Shift L3Harris

Assembler I, 1st Shift Sekisui Aerospace

Aerospace Assembler II - 1st Shift Sekisui Aerospace

Aerospace Assembler I - 1st Shift Sekisui Aerospace

Aerospace Chrome Assistant - 1st Shift Hytek Finishes

Aerospace Zinc Nickel Assistant - 1st Shift Hytek Finishes

Aerospace Cadmium Assistant - 1st Shift Hytek Finishes

Aerospace Drylube/10-85 Painter - 1st Shift Hytek Finishes

Aerospace Chrome Masker - 1st Shift Hytek Finishes

Aerospace Shot Peen Assistant - 1st Shift Hytek Finishes

Aerospace Polish Operator - 1st or 2nd Shift Hytek Finishes

Manufacturing Engineer 3 Spectraforce Technologies Inc.

Lineperson-1st Shift Utz Brands

Packer - 1st Shift Utz Brands

Manufacturing Engineer 2 Spectraforce Technologies Inc.

Manufacturing Technician B - 1st Shift L3Harris

Manufacturing Engineer II Terex Corporation

Machine Tool Manufacturing Engineer III Blue Origin LLC

Manufacturing Engineer I Terex Corporation

Manufacturing Engineer III/Sr. - Design for Automation Terex Corporation

Manufacturing Production Technician Bruker Nano Inc

Manufacturing Engineer II Sekisui Aerospace

Manufacturing Engineer 3 Hexcel Corporation

Manufacturing Engineer III - Product Development Sekisui Aerospace

Manufacturing Engineer Intern (Summer 2026) Parker Hannifin Corporation

Manufacturing Engineer 2 (Aerospace) Parker Hannifin Corporation

Manufacturing Engineer II Hexcel Corporation

Manufacturing Engineer I/II - Weld Engineer Terex Corporation

Resume Resources