Laser Operator - Welder (Multiple Shifts) Blue Origin LLCLaser Operator - Welder (Multiple Shifts)Seattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. ITAR RequirementsTo conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.
Team Assembler, 2nd shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2026-074) (WA, Kirkland) Astronics CorpTeam Assembler, 2nd shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2026-074) (WA, Kirkland)Kirkland, WA$20.12–$27.22 / hourAstronics AES offers a competitive benefits package including: Stay Healthy - Health, dental, vision, disability, life insurance, FSA, HSA, as well as voluntary life/AD&D, voluntary critical illness, accident prevention and hospital indemnity. Perform basic electronic, electromechanical, mechanical or measurement product assembly operations on product components, assemblies, or subassemblies.
Production Test Technician, 2nd Shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2025-127) AstronicsProduction Test Technician, 2nd Shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2025-127)Kirkland, WA$24.52–$36.79 / hourESSENTIAL JOB FUNCTIONS** + May occasionally perform the set-up, testing and troubleshooting of circuits, components, instruments and mechanical assemblies + Test and troubleshoot (less complex) assemblies and/or final systems + May occasionally complete rework on assemblies and/or systems as a result of testing + May occasionally prepare reports of summarizing findings + May occasionally assist in the set-up of specialized test equipment + Monitor and adjust production processes for quality and productivity + Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components **MINIMUM QUALIFICATIONS** **Education/Experience:** + Associate degree (AS) in Electronics Technology or related field/ equivalent electronics military schooling and experience required * _High-power electronics and/or high-power avionics technician experience may be considered in lieu of formal education. If you are interested in working at a dynamic company with a winning culture which has **won awards as one of Washington's Best Places to work for 16 years consecutively, please read on!** **JOB SUMMARY** The Production Test Technician should have a basic mechanical/electrical knowledge, seeking further guidance from Sr.
Diamond Turning Technician Starlink - 2nd Shift Space Exploration Technologies CorpDiamond Turning Technician Starlink - 2nd ShiftRedmond, WA$22–$26.50 / hourli>Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Supervisor, Precision Machining Starlink - 2nd Shift Space Exploration Technologies CorpSupervisor, Precision Machining Starlink - 2nd ShiftWoodinville, WA$110,000–$140,000 / yearAs a technical leader, the Precision Machining Supervisor will meet customer rate demands, proactively identify and resolve production schedule issues, continuously develop and improve production processes, and inspire the team to achieve consistent machining excellence. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Assembly Technician III (2nd Shift), Amazon Leo AmazonManufacturing Assembly Technician III (2nd Shift), Amazon LeoKirkland, WAShifts may vary, depending on program needs - Able to stand for long periods of time and perform repetitive assembly operations - Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift at least 25 lbs. - Process Compliance: Execute work in accordance with established procedures, specifications, and work instructions - Non-Conformance Documentation: Identify and document non-conformities as required to ensure traceability and corrective action.
Manufacturing Engineer - 2nd shift, Amazon Leo AmazonManufacturing Engineer - 2nd shift, Amazon LeoRedmond, WABasic Qualifications - Bachelor's degree in mechanical engineering, electrical engineering, material science, physics or equivalent - 3+ years of hardware design and validation of components, subsystems and systems experience - Knowledge of Lean Manufacturing - Experience in root cause analysis and troubleshooting or problem solving - Experience working with interdisciplinary teams to execute product design from concept to production - Familiarity with Low-Rate Manufacturing Environments & New Product Introduction Preferred Qualifications - Knowledge of engineering practices of hardware development life cycle, including control management, build processes, and testing. - 10% - Mentorship settings with other engineers on the team, performing collaborative work & coaching to develop the team members skillsets, while ensuring common team execution to your technical vision About the team The Optical Inter-Satellite Link Production team is a multi-disciplinary organization responsible for all aspects of production of the key modules enabling satellite-to-satellite communication.
Receiving Specialist Starlink - 2nd Shift Space Exploration Technologies CorpReceiving Specialist Starlink - 2nd ShiftWA$22–$24 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Leveraging advanced satellites and user hardware coupled with our deep experience with both spacecraft and on-orbit operations, Starlink delivers high-speed, low-latency internet to users all over the world.
CNC Machinist Starlink - 2nd Shift Space Exploration Technologies CorpCNC Machinist Starlink - 2nd ShiftRedmond, WA$23–$29 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We've only begun to scratch the surface of Starlink's potential global impact and are looking for best-in-class CNC Machinists to help maximize Starlink's utility for communities and businesses around the globe.
CNC Machinist Starlink - 2nd Shift - Level 4/5 Space Exploration Technologies CorpCNC Machinist Starlink - 2nd Shift - Level 4/5Redmond, WA$38–$45 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We've only begun to scratch the surface of Starlink's potential global impact and are looking for best-in-class CNC Machinists to help maximize Starlink's utility for communities and businesses around the globe.
Lead Process Technician - 2nd Shift, Amazon Leo Amazon.com IncLead Process Technician - 2nd Shift, Amazon LeoEverett, WAThe ideal candidate will have strong leadership skills, excellent problem-solving abilities, and a keen eye for process improvement to drive our team"s success in meeting service level agreements and maintaining high customer satisfaction. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Manufacturing Assembly Technician III, 2nd Shift, Amazon Leo Amazon.com IncManufacturing Assembly Technician III, 2nd Shift, Amazon LeoKirkland, WAExport Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step.
Lab Engineer, OISL Rework/Recovery Area 2nd Shift, OISL Amazon.com IncLab Engineer, OISL Rework/Recovery Area 2nd Shift, OISLRedmond, WAp>As a Lab Engineer in the OISL Rework/Recovery area on 2nd shift, you will be responsible for performing hardware rework, failure analysis, and recovery operations for Optical Inter-Satellite Link (OISL) components and assemblies. Perform hardware rework operations on OISL components including complex assembly/disassembly, component replacement, and precision alignment procedures.
Final Integration Technician II (2nd Shift), Final Integration Amazon.com IncFinal Integration Technician II (2nd Shift), Final IntegrationKirkland, WAWe are seeking talented mid-level integration technicians on back half (Wed-Sat) 2nd shift to execute development and production integration and test activities of the Leo satellite in final integration. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Manufacturing Engineer - 2nd Shift, Amazon Leo Amazon.com IncManufacturing Engineer - 2nd Shift, Amazon LeoRedmond, WA25% - Independent development work such as deep diving on available data sets to identify and implement key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc. You'll be the leading technical voice for a team of manufacturing engineers working on the product, solving challenging technical problems associated with delivering an ultra-high-performing optical, electrical, and mechatronic module to space.
Test Specialist Starlink - 2nd Shift Space Exploration Technologies CorpTest Specialist Starlink - 2nd ShiftRedmond, WA$34–$40 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Diamond Turning Technician (Starlink) - 2nd Shift SpaceXDiamond Turning Technician (Starlink) - 2nd ShiftRedmond, WA$22–$26.50 / hourunassisted + Ability?to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay Range: Level 1: $22.00 - $26.50 Level 2: $25.50 - $31.00 Level 3: $29.50 - $37.00 ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Technician C - 2nd Shift L3Harris Technologies IncManufacturing Technician C - 2nd ShiftRedmond, WA$27.40–$49.04 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Manufacturing Technician B - 2nd Shift L3Harris Technologies IncManufacturing Technician B - 2nd ShiftRedmond, WA$22.83–$42.54 / hourTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
Laser Production Technician Starlink - 2nd Shift Space Exploration Technologies CorpLaser Production Technician Starlink - 2nd ShiftRedmond, WA$22–$26.50 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Manufacturing Specialist Optical Production - 2nd Shift Space Exploration Technologies CorpManufacturing Specialist Optical Production - 2nd ShiftRedmond, WA$34–$40 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.
NewManufacturing Specialist Satellite Transceiver - 2nd Shift Space Exploration Technologies CorpManufacturing Specialist Satellite Transceiver - 2nd ShiftRedmond, WA$34–$40 / hourEnabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Material Handler, 2nd Shift (2026-083) AstronicsMaterial Handler, 2nd Shift (2026-083)Kirkland, WA$20.12–$27.22 / hourCustomer service** - Understand and quickly respond to customer needs + **Near Vision** - See details at close range (within a few feet of the observer) **Technical Skills:** + Data base user interface and query software + Electronic mail software + Enterprise resource planning ERP software + Inventory management software + Spreadsheet software + Label making software + Materials requirements planning logistics and supply chain software **Work Environment:** + Manufacturing environment + Time Pressure + Operating a forklift, pallet jack and/or manlift operator + Standing for long periods of time + Lifting heavy (typically 30 lbs) items **Employment Eligibility Requirements** **:** + This role may involve access to items subject to U.S. export-controls laws or other applicable U.S.-government legal or contractual requirements. + Prepare and maintain records of items shipped (i.e. purchase orders, manual shippers, and work orders) + Perform daily cycle counts + Periodically rotate in RECEIVING for cross training + May drive a non-CDL box truck for deliveries + Other duties as assigned **MINIMUM QUALIFICATIONS** **Education/Experience:** + High school diploma or GED required + Demonstrates familiarity of job duties (typically 1-2 years of direct experience in the essential functions of the position) **Competencies:** + **Comprehension** - Understand and apply information conveyed in written and oral methods + **Communication** - Communicate information and ideas, written and verbal, so others will understand + **Problem Sensitivity** - Tell when something is wrong or is likely to go wrong.
Material Handler, 2nd Shift (2026-082) AstronicsMaterial Handler, 2nd Shift (2026-082)Kirkland, WA$20.12–$27.22 / hourCustomer service** - Understand and quickly respond to customer needs + **Near Vision** - See details at close range (within a few feet of the observer) **Technical Skills:** + Data base user interface and query software + Electronic mail software + Enterprise resource planning ERP software + Inventory management software + Spreadsheet software + Label making software + Materials requirements planning logistics and supply chain software **Work Environment:** + Manufacturing environment + Time Pressure + Operating a forklift, pallet jack and/or manlift operator + Standing for long periods of time + Lifting heavy (typically 30 lbs) items **Employment Eligibility Requirements** **:** + This role may involve access to items subject to U.S. export-controls laws or other applicable U.S.-government legal or contractual requirements. + Prepare and maintain records of items shipped (i.e. purchase orders, manual shippers, and work orders) + Perform daily cycle counts + Periodically rotate in RECEIVING for cross training + May drive a non-CDL box truck for deliveries + Other duties as assigned **MINIMUM QUALIFICATIONS** **Education/Experience:** + High school diploma or GED required + Demonstrates familiarity of job duties (typically 1-2 years of direct experience in the essential functions of the position) **Competencies:** + **Comprehension** - Understand and apply information conveyed in written and oral methods + **Communication** - Communicate information and ideas, written and verbal, so others will understand + **Problem Sensitivity** - Tell when something is wrong or is likely to go wrong.
Test Specialist (Starlink) - 2nd Shift SpaceXTest Specialist (Starlink) - 2nd ShiftRedmond, WA$34–$40 / hourThis role will be covering 2nd shift (typical start time is 4pm) + Must be able to stand for long periods of time + Must be able to lift up to 25 pounds unassisted + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay Range: Level 1: $34.00 - $40.00 Level 2: $38.00 - $45.00 Level 3: $42.00 - $51.00 ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Receiving Specialist (Starlink) - 2nd Shift SpaceXReceiving Specialist (Starlink) - 2nd ShiftWoodinville, WA$22–$24 / hourITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. RECEIVING SPECIALIST (STARLINK) - 2ND SHIFT Starlink is the world's first and largest satellite constellation using a low Earth orbit to deliver broadband internet capable of supporting streaming, online gaming, video calls and more.
CNC Machinist (Starlink) - 2nd Shift - Level 4/5 SpaceXCNC Machinist (Starlink) - 2nd Shift - Level 4/5Redmond, WA$38–$45 / hourRESPONSIBILITIES: + Responsible for setting up, operating multi-axis CNC machines (mills and lathes) up to and including 5 Axis mills and 6 axis lathes + Responsible for all types of drilling, tapping and milling and turning + Completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for machining complex, tight tolerances parts and various materials + Material prep, deburring parts, hauling chips, oiling machines, sweeping up and initiating or assisting in organizational tasks BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 7+ years of experience in the setup and operation of CNC machines + G-code experience PREFERRED SKILLS AND EXPERIENCE: + 10+ years of experience in the setup and operation of CNC machines + Experience with GD&T or interpreting blueprints/manufacturing drawings + Short run, prototype, non-production machining experience + Horizontal mill experience + Basic programming experience + Experience running lathes + live tooling ADDITIONAL REQUIREMENTS: + Must be available for 10 hour shifts. unassisted + Able to stand for extended periods- 8 hours min + Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces + Repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay Range: Level 4: $38.00 - $45.00 Level 5: $43.00 - $52.00
CNC Machinist (Starlink) - 2nd Shift SpaceXCNC Machinist (Starlink) - 2nd ShiftRedmond, WA$23–$29 / hourRESPONSIBILITIES: + Responsible for setting up, operating multi-axis CNC machines (mills and lathes) up to and including 5 Axis mills and 6 axis lathes + Responsible for all types of drilling, tapping and milling and turning + Completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for machining complex, tight tolerances parts and various materials + Material prep, deburring parts, hauling chips, oiling machines, sweeping up and initiating or assisting in organizational tasks BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 3+ years of experience in the setup and operation of CNC machines + G-code experience PREFERRED SKILLS AND EXPERIENCE: + Experience with GD&T or interpreting blueprints/manufacturing drawings + Short run, prototype, non-production machining experience + Horizontal Mill experience + Experience running lathes + live tooling ADDITIONAL REQUIREMENTS: + Must be available for 10 hour shifts. unassisted + Able to stand for extended periods- 8 hours min + Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces + Repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay Range: Level 1: $23.00 - $29.00 Level 2: $28.00 - $34.50 Level 3: $33.00 - $40.00
Development Technician PCBA - 2nd Shift Starlink Space Exploration Technologies CorpDevelopment Technician PCBA - 2nd Shift StarlinkRedmond, WA$23–$29 / hourp>The ideal candidate: has strong SMT/PCBA experience; enjoys working directly with engineers; proven skills for troubleshooting complex issues; possesses excellent attention to detail; and thrives in a fast-paced environment with shifting priorities. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Microelectronics Production Supervisor Starlink - 2nd Shift Space Exploration Technologies CorpMicroelectronics Production Supervisor Starlink - 2nd ShiftRedmond, WA$115,000–$145,000 / yearp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ability to read, interpret controlled documentation, and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists.
Manufacturing Technician C - 2nd Shift 1 L3Harris Technologies IncManufacturing Technician C - 2nd Shift 1Redmond, WATo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
OISL MFG Functional Lead - 2nd shift, Amazon Leo Amazon.com IncOISL MFG Functional Lead - 2nd shift, Amazon LeoRedmond, WAIts mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Assemble mechanical and electrical satellite components, sub-assemblies, and integration assemblies, fabricating and/or processing materials into complex manufactured products, and operating testing equipment and tooling, all in a Cleanroom and ESD control environment.
Manufacturing Assembly Technician II (2nd Shift), Amazon Leo Amazon.com IncManufacturing Assembly Technician II (2nd Shift), Amazon LeoKirkland, WAp>Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step.
NewQuality Inspector-2nd shift, Amazon Leo - Quality Receiving Amazon.com IncQuality Inspector-2nd shift, Amazon Leo - Quality ReceivingEverett, WAIts mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. We value data driven decision making, a comfort with dealing in ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.
Integration Specialist Starlink Aviation - 2nd Shift Space Exploration Technologies CorpIntegration Specialist Starlink Aviation - 2nd ShiftWA$34–$40 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Demonstrated ability to read, interpret controlled documentation and processes such as: cable harnesses, wiring diagrams, layout drawings, mechanical drawings, GD&T, assembly procedures/work instructions, schematics, engineering drawings, and parts lists.
Microelectronics Production Supervisor (Starlink) - 2nd Shift SpaceXMicroelectronics Production Supervisor (Starlink) - 2nd ShiftRedmond, WA$115,000–$145,000 / yearThis role will be covering 1st shift (typical start time is 5AM) + Must be able to stand for long periods of time + Must be able to lift up to 25 pounds unassisted + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION & BENEFITS: Pay range: Supervisor: $115,000.00 - $145,000.00/per year Base salary is just one part of your total rewards package at SpaceX. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Specialist (Optical Production) - 2nd Shift SpaceXManufacturing Specialist (Optical Production) - 2nd ShiftRedmond, WA$34–$40 / hourEstimated shift start time: 4PM + Must be able to stand for long periods of time + Must be able to lift up to 25 pounds unassisted + Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS: Pay Range: Level 1: $34.00 - $40.00 Level 2: $38.00 - $45.00 Level 3: $42.00 - $51.00 ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewReceiving Inspector Starlink - 2nd Shift Space Exploration Technologies CorpReceiving Inspector Starlink - 2nd ShiftWA$22–$26.50 / hourWe provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Production Machinist Starlink - 2nd Shift - Level 4/5 Space Exploration Technologies CorpProduction Machinist Starlink - 2nd Shift - Level 4/5WA$38–$45 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes.
SMT Specialist - 2nd Shift Space Exploration Technologies CorpSMT Specialist - 2nd ShiftRedmond, WA$34–$40 / hourli>Provide solutions to streamline space-grade circuit board assembly and test processes which may include flying probe, AOI, and functional testing, reflow soldering, selective soldering, and conformal coating. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Integration & Test Specialist Bus & Payload Sub-Assemblies - 2nd shift Space Exploration Technologies CorpIntegration & Test Specialist Bus & Payload Sub-Assemblies - 2nd shiftRedmond, WA$34–$40 / hourEnabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Production Machinist (Starlink) - 2nd Shift - Level 4/5 SpaceXProduction Machinist (Starlink) - 2nd Shift - Level 4/5Woodinville, WA$38–$45 / hourRESPONSIBILITIES: + Responsible for setting up and operating multi-axis CNC machines, machining micron-level tolerance parts at production volumes + Responsible for maintaining maximum machine uptime by troubleshooting off-nominal issues such as resolving alarms, repairing tooling, and actively maintaining best practices + Responsible for troubleshooting + Responsible for completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for working with complex, tight tolerance parts and various materials BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 5+ years of experience with g-code, set up, operation and/or programming of CNC mills/lathes + Experience working in production machining cells + Experience machining parts PREFERRED SKILLS AND EXPERIENCE: + 5+ years of horizontal mill setup experience + 5+ years of vertical mill setup experience + Experience using pallet systems and cells + 1+ years of CNC programming experience using NX + Diamond turning experience + Experience with micron level tolerance parts and how to handle/inspect them + Experience working with aluminum and copper ?ADDITIONAL REQUIREMENTS: + Must be available to work all shifts, overtime and weekends as needed. unassisted + Ability to stand for extended periods - 8 hours min + Ability to stoop, bend, crawl, and being able to maneuver in tight spaces + Ability to work in an environment with repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: Production Machinist/Level 4: $38.00 - $45.00/hour Production Machinist/Level 5: $43.00 - $52.00/hour
Manufacturing Technician C - 2nd Shift L3HarrisManufacturing Technician C - 2nd ShiftRedmond, WAPlease click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) . L3Harris announced (https://www.l3harris.com/newsroom/press-release/2026/01/l3harris-sell-majority-stake-space-propulsion-power-business-ae) on January 5th, that AE Industrial Partners ("AE Industrial") has agreed to acquire a controlling interest in L3Harris' Space Propulsion and Power Systems business.
Lab Engineer SSL 2nd shift, Amazon Leo Amazon.com IncLab Engineer SSL 2nd shift, Amazon LeoRedmond, WAFrom individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks.
Dynamics Test Engineer - 2nd Shift, Amazon Leo Amazon.com IncDynamics Test Engineer - 2nd Shift, Amazon LeoKirkland, WAIts mission is to deliver fast, reliable internet to customers and communities around the world, and we"ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers - from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. We value data driven decision making, a comfort in dealing with ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.
Production Supervisor, 2nd Shift BH, Amazon Leo Amazon.com IncProduction Supervisor, 2nd Shift BH, Amazon LeoKirkland, WAIts mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. This position requires a high degree of skill in many areas, including technical leadership, technician development, mechanical assembly, avionics integration, troubleshooting, electrical checkouts and environmental testing.
Starlink Production Technician - 2nd Shift Space Exploration Technologies CorpStarlink Production Technician - 2nd ShiftRedmond, WA$22–$26.50 / hourp>ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Manufacturing Specialist - 2nd Shift Space Exploration Technologies CorpManufacturing Specialist - 2nd ShiftRedmond, WA$34–$40 / hourJoin the Starlink printed circuit board assembly (PCBA) team and take ownership of Surface Mount Technology (SMT) processes that enable the high-volume production of electronics designed for spaceflight. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Material Handler, 2nd Shift (2026-083) (WA, Kirkland) Astronics CorpMaterial Handler, 2nd Shift (2026-083) (WA, Kirkland)Kirkland, WA$20.12–$27.22 / hourFactors such as experience in comparable roles, skill set, training, education, certifications, other qualifications, market conditions, and business needs influence the actual salary offered. The Material Handler will manually move freight, stock, or other materials or perform other general labor in relation to managing materials for the production line.
Material Handler, 2nd Shift (2026-091) (WA, Kirkland) Astronics CorpMaterial Handler, 2nd Shift (2026-091) (WA, Kirkland)Kirkland, WAp>Factors such as experience in comparable roles, skill set, training, education, certifications, other qualifications, market conditions, and business needs influence the actual salary offered. The Material Handler will manually move freight, stock, or other materials or perform other general labor in relation to managing materials for the production line.