62 Results for

2nd Shift Military Jobs in Redmond, WA

Jobs

Poulsbo, WA22 days ago

Full-time

Experience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. As a 2nd Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.).

Poulsbo, WA22 days ago

Full-time

Experience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. As a 1st Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.).

Kent, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Additional support will be in assisting department Paint Assistants with guidance on laying parts out on screens, transport loaded screens in and out of paint booths/ovens, and sand parts.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

Kent, WA30+ days ago

Full-time
Employee

Follow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Woodmont Beach, WA20 days ago

Full-time
Employee

Woodmont Beach, WA12 days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

Woodmont Beach, WA12 days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA20 days ago

Full-time
Employee

Follow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Woodmont Beach, WA12 days ago

Full-time
Employee

l learn a range of techniques and tools for polishing parts including the use of wheel lathes, Dynafiles, and various hand tools to achieve customer driven visual requirements, most often to achieve a grain finish appearance. *FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Seattle, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Who we are: Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world.

Seattle, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA20 days ago

Full-time
Employee

Woodmont Beach, WA20 days ago

Full-time
Employee

Woodmont Beach, WA20 days ago

Full-time
Employee

Woodmont Beach, WA20 days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA20 days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.

Woodmont Beach, WA20 days ago

Full-time
Employee

Woodmont Beach, WA12 days ago

Full-time
Employee

Woodmont Beach, WA12 days ago

Full-time
Employee

Kent, WA12 days ago

Full-time
Employee

Algona, WA13 days ago

Full-time
Employee

is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries.

Kirkland, WA10 days ago

$21.93–$29.67 Per Hour

They will complete the following job duties: + Perform inspection of manufacturing goods during the manufacturing process + Conducts dimensional and electrical inspection of sub-assemblies or final systems assemblies + Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers + Interprets prints, manufacturing drawings, diagrams, wire cards and lists in approving or rejecting in-process or final assemblies + May perform in process inspections of rework items **MINIMUM REQUIREMENTS** **Education:** + High School Diploma or equivalent is required. + Demonstrates familiarity (typically 1-2 years of Production experience in the essential functions of the position) **Technical Skills:** + Basic computer skills, including email + Basic ERP skills + Basic Microsoft Office Suite + Ability to obtain J-Std and IPC certifications + May require flight critical certification **Physical Abilities:** + May be stationary for long periods of time + May lift up to 25 pounds + Near Vision - The ability to see details at close range (within a few feet of the observer) **Competenices:** + Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong.

Kirkland, WA30+ days ago

$24.52–$36.79 Per Hour

ESSENTIAL JOB FUNCTIONS** + May occasionally perform the set-up, testing and troubleshooting of circuits, components, instruments and mechanical assemblies + Test and troubleshoot (less complex) assemblies and/or final systems + May occasionally complete rework on assemblies and/or systems as a result of testing + May occasionally prepare reports of summarizing findings + May occasionally assist in the set-up of specialized test equipment + Monitor and adjust production processes for quality and productivity + Read blueprints, wiring diagrams, schematic drawings, or engineering instructions for assembling electronics units, applying knowledge of electronic theory and components **MINIMUM QUALIFICATIONS** **Education/Experience:** + Associate degree (AS) in Electronics Technology or related field/ equivalent electronics military schooling and experience required * _High-power electronics and/or high-power avionics technician experience may be considered in lieu of formal education. If you are interested in working at a dynamic company with a winning culture which has **won awards as one of Washington's Best Places to work for 16 years consecutively, please read on!** **JOB SUMMARY** The Production Test Technician should have a basic mechanical/electrical knowledge, seeking further guidance from Sr.

Kirkland, WA24 days ago

Shifts may vary, depending on program needs - Able to stand for long periods of time and perform repetitive assembly operations - Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift at least 25 lbs. - Process Compliance: Execute work in accordance with established procedures, specifications, and work instructions - Non-Conformance Documentation: Identify and document non-conformities as required to ensure traceability and corrective action.

Kirkland, WA12 days ago

System Integration & Setup: Perform functions associated with all manufacturing operations, including working with engineers in set-up, as well as performing troubleshooting, rework, and quality testing related to the production of parts, components, subassemblies, and final assemblies. This role performs high-level technical functions across the full manufacturing lifecycle, assisting engineering with the setup of complex systems, rigorous quality testing, and the troubleshooting and rework required to bring aerospace components to final flight-readiness.

Kirkland, WA15 days ago

Basic Qualifications - Bachelor's degree or equivalent - 2+ years of professional experience leading a team - 5+ years of hands-on experience in mechanical or electrical hardware assembly, test, and/or installation - Must be able to work 2nd shift hours (5pm to 3:30am, Sun-Wed or Wed-Sat) Preferred Qualifications - Experience hiring, training and leading production teams. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.

Kirkland, WA24 days ago

$31.76–$47.64 Per Hour

Technical Skills:** + Data base user interface and query software + Electronic mail software + Enterprise resource planning ERP software + Microsoft Office + Microsoft Excel + Electrical/electronic knowledge + Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming **Physical Abilities:** + Manual dexterity + Lifting heavy (typically 40 lbs.) items + Color differentiation **Work Environment:** + Exposure to high voltage + Exposure to LN2 + Exposure to power tools + Exposure to chemicals + Moderate noise environment **EMPLOYMENT ELIGIBILITY REQUIREMENTS** + As a US Department of Defense Contractor, this position may involve access to items subject to U.S. export-control laws. If you are interested in working at a dynamic company with a winning culture which has **won awards as one of Washington's Best Places to work for 16 years consecutively, please read on!** **JOB SUMMARY** The Test Engineering Technician will build, test, troubleshoot, repair, and modify developmental and production electronic components, parts, equipment, and systems while applying principles and theories of electronics, electrical circuitry, and electronic and electrical testing.

Kent, WA30+ days ago

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical DemandsAbility to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

New!

Auburn, WA4 days ago

$107,100–$144,900 Per Year

Employer will not sponsor applicants for employment visa status.** **Basic Qualifications (Required Skills/ Experience):** + 3+ years of relevant work experience + Ability to read and interpret engineering drawings + Ability to work 2nd shift is required by this position **Preferred Qualifications (Desired Skills/Experience):** + Experience with Machine Control Data (MCD) **Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.** **Drug Free Workplace:** Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. **Boeing Commercial Airlines (BCA)** is hiring for **2nd shift** **Numerical Control Programmers (Mid Level)** to join the Numerical Control Quality Assurance team in **Auburn, WA.** **Position Responsibilities:** + Assists in numerous tasks related to numerical controlled manufacturing, including research and data collection to support cross functional teams, establishing technical requirements for manufacturing and producibility and planning the integration of new machining techniques and manufacturing methods, processes, software and equipment.

Lynnwood, WA30+ days ago

$22.26–$27.45 Per Hour

Abilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in a moderate to high paced work environment in a high volume setting. Beyond an associate’s base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement — as well as performance-based bonus programs for certain positions.

Renton, WA12 days ago

$35.78–$45.75 Per Hour

Responsibilities include but are not limited to repairing, maintaining, installing and troubleshooting industrial equipment, systems and components including but limited to washers, dryers, steam tunnels, conveyor systems and boilers; performing preventive/predictive maintenance; performing various welding activities; preforming boiler chemical testing and making necessary chemistry adjustments; resolving safety concerns; performing indoor and outdoor housekeeping; maintaining inventory supplies; preparing maintenance records; identifying and evaluating, monitoring work performed by inside and outside service companies; responding to emergency alarms; and mentoring Maintenance Technician I partners. With offerings including uniforms, mats, mops, towels, restroom supplies, workplace water services, first aid and safety products, eye-wash stations, safety training, fire extinguishers, sprinkler systems and alarm service, Cintas helps customers get Ready for the Workday®.

Renton, WA7 days ago

$31.67–$40.47 Per Hour

Responsibilities include assisting with repairing, maintaining, installing and troubleshooting industrial equipment, systems and components including, but not limited to, washers, dryers, steam tunnels, conveyor systems and boilers; assisting with performing preventive/predictive maintenance; resolving safety concerns; performing indoor and outdoor housekeeping; monitoring inventory supplies and maintaining maintenance records. With offerings including uniforms, mats, mops, towels, restroom supplies, workplace water services, first aid and safety products, eye-wash stations, safety training, fire extinguishers, sprinkler systems and alarm service, Cintas helps customers get Ready for the Workday®.

Redmond, WA12 days ago

$23–$29 Per Hour

RESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 2nd Shift 3:30 PM to 2:00 AM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Lynnwood, WA30+ days ago

$25.61–$32.80 Per Hour

Abilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in high paced work environment in a high-volume setting. Beyond an associate’s base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement — as well as performance-based bonus programs for certain positions.

Lynnwood, WA30+ days ago

$20.76–$28.97 Per Hour

Abilities:Accurate color vision, near vision, and depth perception and other vision capabilities required;Manipulative skills, including finger and manual dexterity;Adept hand-eye coordination and arm-hand steadiness;Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams;Ability to work well in high paced work environment in a high volume settingEducation/Certification:High School diploma or equivalent;Fine soldering certificate or equivalent experience. + Skills:Strong verbal and written communication;Proficiency in reading comprehension (understanding written sentences and paragraphs in work related documents) of the English language;Basic computer skills (understandingofbasic software).

Lynnwood, WA30+ days ago

$25.15–$34.18 Per Hour

Preferred Qualifications:** + Ability to coach and mentor as well as have input into employment process + Ability to do part marking, wrapping and packaging finished goods and transport to other work areas + Ability to ensure all paperwork is completed appropriately and close work orders + Ability to perceive and pre-determine sequence of operations and installation requirements from sketches and oral instructions + Experience maintaining equipment on a stringent calibration schedule + IPC solder rework certification + Designated Inspection certification **Top Benefits:** As a team member at Crane Aerospace and Electronics, you'll enjoy: + **Benefits:** Health care, dental, vision, life and disability insurance starting the first day of the month + **Time Off:** 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year. Beyond an associate's base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement - as well as performance-based bonus programs for certain positions.

Lynnwood, WA30+ days ago

$21.64–$30.30 Per Hour

Assemble parts or units, and position, align, and fasten units to assemblies using hand or power tools, such as soldering irons, solder suckers, wire strippers, high voltage soldering irons, resistance (module) welders, bench spot welders, nut drivers, torque wrenches, drill presses, sanders, and microscope. Beyond an associate’s base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement — as well as performance-based bonus programs for certain positions.

New!

Lynnwood, WA4 days ago

$28.24–$37.38 Per Hour

Abilities: Ability to learn new test software and equipment and to identify abnormal conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter, on-line training PDM and MRP systems ? Calibrate or otherwise adjust assigned units by such means as potentiometer adjustment, clocking or other positioning, shimming, tension or coil adjustments, bearing and gear adjustments, as appropriate for specific unit; Make required mathematical calculations for voltage, resistance, current, impedance, amplification, flow rate and mass, mechanical dimensions and adjustments ?

New!

Redmond, WA6 days ago

$23–$29 Per Hour

RESPONSIBILITIES: + Support production engineering during development and pre-production phases by building, assembling, and testing pre-production, qualification, and flight PCBA hardware + Assist with initial PCBA line setup, equipment programming, qualification of test setups, and transition of new designs into production + Program, load, and operate automated SMT production machines including pick & place, reflow ovens, stencil printers, conformal coating, AOI, and X-ray systems + Operate and troubleshoot SMT equipment (pick & place, reflow ovens, stencil printers, conformal coating, AOI, X-ray) with a focus on process stability and yield improvement + Perform rework and recovery on non-conforming hardware while maintaining design integrity and documenting root causes + Support continuous improvement projects including test rack builds, factory automation, and production line enhancements + Thoroughly document processes, failures, and improvements using data to drive corrective actions and yield increases + Provide surge support for critical production, qualification, or development builds + Collaborate with engineers to give real-time feedback on manufacturability, DFM opportunities, and process issues + Assist with training of junior technicians on SMT equipment operation and basic troubleshooting + Work with production support teams to guarantee the daily success of PCBA production safely, reliably, and at rate BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ years of hands-on experience in SMT/PCBA manufacturing, assembly, or test PREFERRED SKILLS AND EXPERIENCE: + Associates degree, apprenticeship, or military electronics technician training + Experience working directly with engineers in development or new process introduction (NPI) environments + Hands-on experience programming and optimizing SMT processes (pick & place, reflow, conformal coating, through-hole, AOI, or X-ray inspection) + Proficiency reading and interpreting schematics, assembly drawings, Gerber files, and work instructions + Soldering experience with IPC-A-610 or J-STD-001 certification (Class 2 or 3) + Strong troubleshooting and problem-solving skills with minimal supervision + Proficient with Microsoft Excel, Word, PowerPoint, and basic ERP systems + Excellent attention to detail with the ability to identify subtle defects and maintain high-quality output in a high-volume environment + Positive attitude, strong team player, and willingness to provide constructive feedback to improve designs and tooling + Previous aerospace, automotive, or high-reliability electronics manufacturing experience COMPENSATION AND BENEFITS: Pay range: Production Development Technician/Level 1: $23.00 - $29.00/hour Production Development Technician/Level 2: $28.00 - $34.50/hour Production Development Technician/Level 3: $33.00 - $40.00/hour The ideal candidate: has strong SMT/PCBA experience; enjoys working directly with engineers; proven skills for troubleshooting complex issues; possesses excellent attention to detail; and thrives in a fast-paced environment with shifting priorities.

Marysville, WA30+ days ago

Annual salary** USD 48,360 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Have a sincere desire to work and be able to work independently or with a team to complete tasks in a timely manner.

Marysville, WA24 days ago

Annual salary** USD 44,200 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Have a sincere desire to work and be able to work independently or with a team to complete tasks in a timely manner.

Seattle, WA30+ days ago

$34.85–$38.80 Per Hour

Job Qualifications Education: + High School degree or equivalent Experience: + Experience working as a maintenance technician or equivalent education + Experience with truck repair, body and frame repair + Must provide own tools to perform job duties + Ability to complete required paperwork and records + Must possess a valid Commercial Driver's License (when required) + Working knowledge of most systems located on a truck/truck tractor, a semi-trailer or converter dolly + Proficient at reading precision instruments such as micrometers, dial indicators, bore gauges, voltmeters, digital multi-meters, calibrators + and other electronic diagnostic tools + Ability to troubleshoot and do failure analysis of some of the component parts and systems on the truck or truck tractor; or the component parts and systems of the trailer or converter dolly (This requirement may not apply to body and frame specialists) + Knowledge of DOT, EPA, ICC and OSHA rules and regulations + Willingness to participate in training classes offered and/or requested by the company and willingness to attend when the class is offered which might require a shift change + Willing to take written and/or oral tests to provide management with information to be used for management and classification + Consistent with company policies, individuals are expected to maintain superior customer relations + Willing to work on any piece of rolling stock and associated equipment as directed by the company Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Primary Responsibilities + Build, rebuild and repair all parts of company equipment as may be required in the department + Diagnose any mechanical, electrical or other breakdown or failure to a motor truck or related equipment + Read precision instruments such as micrometers, dial indicators, bore gauges, voltmeters, digital multi-meters, calibrators and other electronic diagnostic tools + Troubleshoot and perform failure analysis of the component parts and systems on the truck or truck tractor; or the component parts and systems of the trailer or converter dolly (This requirement may not apply to body and frame specialists) + When applicable use welding skills and knowledge of metals to complete truck repairs + Individuals who work on converter dollies must be able to weld horizontally and vertically without air pockets in the bead + Apply knowledge of DOT, EPA, ICC, and OSHA rules and regulations + This is not an all-inclusive list of job responsibilities and duties.

Lynnwood, WA25 days ago

Non-Essential Functions:** + Understand and/or participate with internal/external audits + Review work instructions for errors and/or clarification improvements + May be required to repair/rework defective or returned assemblies **Minimum Qualifications:** + Experience: 10+ years of Small Component Assembly experience in a manufacturing environment o Minimum 1 year of specific micro soldering experience + Knowledge: Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods + Skills: Strong verbal and written communication; Proficiency in reading comprehension (understanding written sentences and paragraphs in work related documents) of the English language; Basic computer skills (understanding of basic software) + Abilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept handeye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in high paced work environment in a high volume setting + Education/Certification: High School diploma or equivalent; Fine soldering certificate or equivalent experience + **Eligibility Requirement:** This position may require access to Controlled Data or Information. **Preferred Qualifications:** + Ability to coach and mentor as well as have input into employment process + Ability to do part marking, wrapping and packaging finished goods and transport to other work areas + Ability to ensure all paperwork and work order transactions are completed appropriately and close work orders + Ability to perceive and pre-determine sequence of operations and installation requirements from sketches and oral instructions + Experience maintaining equipment on a stringent calibration schedule + IPC solder certification + Designated Inspection certification **Working Conditions:** + Working conditions could include a Class 7 or 8 Cleanroom, or general manufacturing environment + Up to7hours of Microscope Work Daily + Manufacturing operations may require the use of safety equipment to include but not limitedto:eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE + May be exposed to unusual environmental conditions such as loud noises + Standing:25%*percentage is approximate and may vary depending on work task + Sitting:75%*percentage is approximate and may vary depending on work task + Lifting (in pounds):up to 40 pounds + Pushing (in pounds):up to 40 pounds + Mental/Visual:use of soldering equipment, microscopes/magnifying glasses + Workspace:assembly cell **Top Benefits:** As a team member at Crane Aerospace and Electronics, you'll enjoy:?

New!

Marysville, WA6 days ago

Annual salary** USD 45,760 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Have a sincere desire to work and be able to work independently or with a team to complete tasks in a timely manner.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 2nd Shift Military job opportunities. Plus, receive relevant job recommendations in your inbox.

2nd Shift Military Jobs in Redmond, WA

Jobs

Cannabis Production Worker 2nd ShiftGreen Revolution

Cannabis Production Worker 1st ShiftGreen Revolution

Aerospance Painter - 2nd ShiftHytek Finishes

Aerospace Chrome Assistant - 2nd ShiftHytek Finishes

Aerospace Packager - 2nd ShiftHytek Finishes

Aerospace Cadmium Assistant - 2nd ShiftHytek Finishes

Aerospace Cadmium Masker - 2nd ShiftHytek Finishes

Aerospace Painter - 2nd ShiftHytek Finishes

Aerospace Titanium-Cadmium Assistant - 2nd ShiftHytek Finishes

Aerospace Titanium Cadmium Assistant - 2nd ShiftHytek Finishes

Aerospace Anodize Operator - 2nd ShiftHytek Finishes

Aerospace Polish Operator - 1st or 2nd ShiftHytek Finishes

Machinist Weekday 2nd ShiftBlue Origin LLC

Additive Manufacturing Machine Technician (2nd Shift)Blue Origin LLC

Warehouse Coordinator 2nd shift Monday - Friday 3:00PM - 12:00AMAtkore International

CNC Laser Operator - C ShiftBlue Origin LLC

Aerospace Zinc Nickel Assistant - 3rd ShiftHytek Finishes

Aerospace Zinc Nickel Assistant - 1st ShiftHytek Finishes

Aerospace Chrome Assistant - 1st ShiftHytek Finishes

Aerospace Abrasive Blast Operator - 3rd ShiftHytek Finishes

Aerospace Anodize Operator - 1st ShiftHytek Finishes

Aerospace Paint Masker - 3rd ShiftHytek Finishes

Aerospace Cadmium Assistant - 1st ShiftHytek Finishes

Aerospace Drylube/10-85 Painter - 1st ShiftHytek Finishes

Aerospace Cadmium Assistant - 3rd ShiftHytek Finishes

Aerospace Painter - 3rd ShiftHytek Finishes

Tool Crib Attendant - Level 1 - Weekday Night ShiftPrimus International LLC

Production Inspector, 2nd shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2026-059)Astronics

Production Test Technician, 2nd Shift (Mon - Thurs 3:30 p.m. to 2:00 a.m.) (2025-127)Astronics

Manufacturing Assembly Technician III (2nd Shift), Amazon LeoAmazon

Sr. Production Test Technician - 2nd ShiftProtingent

Production Supervisor, 2nd Shift BH, Amazon LeoAmazon

Test Engineering Technician, 2nd Shift (Mon - Thurs 3:00 pm - 1:30 am) (2026-048)Astronics

Aerospace Abrasive Blast Operator - 2nd ShiftHytek Finishes

2nd Shift Numerical Control Programmer - Quality Assurance (Mid-Level)The Boeing Company

Electronics Assembler- 1st & 2nd Shift (Soldering Required) (Open)Crane Aerospace & Electronics

Maintenance Technician II - 2nd ShiftCintas

Maintenance Technician I - 2nd ShiftCintas

Integration Technician (Starlink) - 2nd ShiftSpaceX

Electronics Assembler III (2nd Shift)Crane Aerospace & Electronics

Cleanroom Assembler II-IV (Soldering Technician) -2nd ShiftCrane Aerospace & Electronics

Electronics Assembler II (2nd Shift)Crane Aerospace & Electronics

Cleanroom Assembler II-Soldering Technician (Contract to Hire)- 2nd shiftCrane Aerospace & Electronics

Technician II Production - 2nd ShiftCrane Aerospace & Electronics

Development Technician (PCBA) - 2nd Shift (Starlink)SpaceX

Resin Application Lead Technician - 2nd Shift - $23.25/hr - SCM MVSafran

Core Saw Operator - 2nd Shift - $21.25/hr - SCM MVSafran

Tractor/Trailer Tech 2nd shiftOld Dominion Freight Line

Cleanroom Micro-Soldering Specialist - 2nd Shift (1:30pm-10pm)Crane Aerospace & Electronics

Print Shop Technician - 2nd Shift (4p start) - $22/hr - SCM MVSafran

Resume Resources