Med-Trans CorporationAircraft Maintenance Technician - RW (NE) Med-Trans CorporationAircraft Maintenance Technician - RW (NE)Andrews, NC$65,239–$94,567Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients.
Republic ServicesNewFleet Maintenance Diesel Technician (B) - bonus if hired Republic ServicesFleet Maintenance Diesel Technician (B) - bonus if hiredStatesville, NCPOSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.
HSGI, Inc.Aircraft Maintenance Technician - Kinston, NC HSGI, Inc.Aircraft Maintenance Technician - Kinston, NCKinston, NC$68,640–$73,320 / yearWork with the team to conduct preflight and post flight inspections on B747 aircraft, refuel aircraft, reposition aircraft, repair any aircraft systems written up during flight. Work with the team to conduct pref-light and post flight inspections on B747 aircraft, refuel aircraft, re-position aircraft, repair any aircraft systems.
HSGI, Inc.Aircraft Mechanic - Kinston, NC HSGI, Inc.Aircraft Mechanic - Kinston, NCKinston, NCWork with the team to conduct preflight and post flight inspections on B747 aircraft, refuel aircraft, reposition aircraft, repair any aircraft systems written up during flight. Work with the team to conduct pref-light and post flight inspections on B747 aircraft, refuel aircraft, re-position aircraft, repair any aircraft systems.
HSGI, Inc.Airframe Powerplant Technician - Kinston, NC HSGI, Inc.Airframe Powerplant Technician - Kinston, NCKinston, NCUnder minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. HSGI, Inc. is a full service staffing company supplying qualified technical and professional employees to the most reputable companies in the Aerospace/Aircraft industry—across the United States and abroad.
Fly Exclusive, LLCMilitary DoD SkillBridge - Airframe and Powerplant Aircraft Maintenance Technician Fly Exclusive, LLCMilitary DoD SkillBridge - Airframe and Powerplant Aircraft Maintenance TechnicianKinston, NCWhile performing the duties of this job, employees are frequently exposed to fumes or airborne particles, moving mechanical parts, vibrations, and loud noise levels both inside and outside the hangar. The Airframe and Powerplant Aircraft Maintenance Technician must accurately repair and perform scheduled maintenance on all airplanes, as well as perform inspections as required by the Federal Aviation Administration (FAA).
Company ConfidentialEW Electronic Technician II Company ConfidentialEW Electronic Technician IICherry Point, NC$75,649.60–$75,649.60Full timeApplies comprehensive technical knowledge to solve complex problems by interpreting manufacturer’s manuals or similar documents following relevant Work Instructions and direction from higher-level technicians. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class.
Sparta NetworkingAircraft Maintenance Technician (A&P Required) - Charlotte, NC Sparta NetworkingAircraft Maintenance Technician (A&P Required) - Charlotte, NCCharlotte, NCThis is a hands-on role working on aircraft systems, inspections, and repairs in a professional maintenance environment. We are hiring Aircraft Maintenance Technicians to support ongoing maintenance operations.
HSGI, Inc.Sheet Metal Assembler - Kinston, NC HSGI, Inc.Sheet Metal Assembler - Kinston, NCKinston, NC$50,438–$67,592 / yearUse complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. The Sheetmetal Technician works under general supervision to safely layout, fabricate, and install parts, equipment and fabricated items on aircraft following established operating procedures.
HSGI, Inc.Sheet Metal Assembly - Kinston, NC HSGI, Inc.Sheet Metal Assembly - Kinston, NCKinston, NC$62,500–$95,000 / yearUse complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. The Sheetmetal Technician works under general supervision to safely layout, fabricate, and install parts, equipment and fabricated items on aircraft following established operating procedures.
The Structures Company, LLCAircraft Technician, Service Center (Weekend Shift) The Structures Company, LLCAircraft Technician, Service Center (Weekend Shift)Greensboro, NC$33As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Perform inspections, maintenance, and repairs on airframe and powerplant systems in accordance with approved methods and practices.
Honda Motor Co LtdAircraft Technician, Service Center Honda Motor Co LtdAircraft Technician, Service CenterGreensboro, NCPull, push, carry, lift or move materials/people/items/equipment weighing 50 lbs or more during the work shift, with the use of Company provided "reach assistance technology" or "movement assist technology" (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment; people movers etc.), as required by job duties. The Aircraft Technician, GSO Service Center works within an established FAR 145 Repair Station and is responsible for assigned maintenance tasks and associated inspections, functional/operational checks, and troubleshooting affected aircraft systems.
American AirlinesNewSupervisor, Aircraft Line Maintenance Hub (Charlotte, NC, US) American AirlinesSupervisor, Aircraft Line Maintenance Hub (Charlotte, NC, US)Charlotte, NCOur 20+ Employee Business Resource Groups are focused on connecting our team members to our customers, suppliers, communities and shareholders, helping team members reach their full potential and creating an inclusive work environment to meet and exceed the needs of our diverse world. They do this by effectively managing the workload, resources, and work relationships of both internal customers & support groups and external regulatory authorities & vendors.
American AirlinesManager, Aircraft Base Maintenance American AirlinesManager, Aircraft Base MaintenanceCharlotte, NCOur 20+ Employee Business Resource Groups are focused on connecting our team members to our customers, suppliers, communities and shareholders, helping team members reach their full potential and creating an inclusive work environment to meet and exceed the needs of our diverse world. + Responsible for leading a team of supervisors, crew chiefs, aircraft maintenance technicians, and administrative team members as a key member of the dynamic and fast-paced American Airlines Maintenance organization.
The Structures Company, LLCNewAircraft Composite Technician The Structures Company, LLCAircraft Composite TechnicianKinston, NCAs trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Keywords: aerospace, aviation, composite bonding, aircraft assembly, manufacturing, defense, engineering, maintenance, aviation production.
The Structures Company, LLC(P) Aircraft Assembly Technician The Structures Company, LLC(P) Aircraft Assembly TechnicianKinston, NC$36As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Perform a range of repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies.
The Structures CompanyAircraft Technician, Service Center (Weekend Shift) The Structures CompanyAircraft Technician, Service Center (Weekend Shift)Greensboro, NC$33–$45 / hourAs trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Perform inspections, maintenance, and repairs on airframe and powerplant systems in accordance with approved methods and practices.
AAA USAAircraft Paint Technician AAA USAAircraft Paint TechnicianGreensboro, North Carolina$20–$28About AAA USA:AAA USA is an in-situ manufacturing company that offers specialized subcontracting and technical assistance services related to industrialization, production and supplier monitoring processes in the Aerospace and Transportation sector. Supported by the international expertise of the AAA Group, we offer our customers the benefit of a proven approach to deliver a high-quality finished product.
AAA USANewAircraft Composite Technician AAA USAAircraft Composite TechnicianGreensboro, North Carolina$40About AAA USA:AAA USA is an in-situ manufacturing company that offers specialized subcontracting and technical assistance services related to industrialization, production and supplier monitoring processes in the Aerospace and Transportation sector. Previous experience with lay-ups, assembling, pre-fitting, and bonding a variety of metal, composite or laminate fabrications, assemblies, parts, skins or equipment.
The Structures CompanyNewAircraft Composite Technician The Structures CompanyAircraft Composite TechnicianKinston, NCAs trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Keywords: aerospace, aviation, composite bonding, aircraft assembly, manufacturing, defense, engineering, maintenance, aviation production.
PSA Airlines, IncAircraft Mechanic PSA Airlines, IncAircraft Mechaniccharlotte, NCJoin our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.
Air MethodsAviation Maintenance Technician 135 Air MethodsAviation Maintenance Technician 135Elm City, North CarolinaHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. • Performs inspections and repairs of aircraft and components in accordance with maintenance procedures, airworthiness directives, service bulletins, service letters, and applicable Federal Aviation Regulations.
Kay and Associates, Inc.Aircraft Mechanic III - MAG-14 Kay and Associates, Inc.Aircraft Mechanic III - MAG-14havelock, NCFour or more years experience with NALCOMISOOMA Basic Corrosion Control Course Advanced Corrosion Control CoursePaint and Final Finish Hydraulic Contamination Qualification Aircraft EngineAPU Qualification Aircraft Jacking Qualification Previously certified FA-18 and or F-35 CDICDQAR Basic Qualifications Six or more years FA-18 or F-25 experience Low Observable Paint Qualified Individual I Aircraft Maintenance Qualification Must be able to work shift schedules as required per Performance Work Statement PWS Must be able to work work-week schedules i.e. M-F Sn-Th or as required per PWS Must be able to pass a background check Must be able to obtain favorable National Agency Check with Written Inquires NACI IAW DTM-08-003 Next Generation Common Access Card CAC Implementation Guidance Secret security clearance Must be able to climb ladders raised platforms and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Must be able to pass employment physicals Must be able to deploy to support off station exercises and perform other support duties if required Compensation 38.82hour Other Compensation Employees will receive a health and welfare benefit of 2.65 for every hour worked. Task Requirements Scheduled and unscheduled maintenance support for assigned FA-18 and F-35 aircraft Aircraft maintenance action documentation via logs records forms and electronic means Support Equipment SE operation and inspections Aircraft inspections Aircraft movement Corrosion ControlAircraft PaintingLow Observable Material Restoration Preservation and de-preservation General aircraft maintenance Low Observable Health Assessment System Data Entry Perform general housekeeping and organization of workstations shops maintenance facility to provide a clean safe and FOD free environment Perform shift work andor overtime as required Perform other tasks as directed.
EagleViewNewAviation Maintenance Technician Apprentice EagleViewAviation Maintenance Technician ApprenticeBurlington, North Carolina$22–$26 / hourThe compensation offered to the successful candidate will be based on a variety of factors, including but not limited to, the candidate’s work experience, education and licenses, work-related training, key skills, the core duties of the role and its associated responsibilities, additional benefits offered, and the location where the work will be performed. Ability to read and understand maintenance manuals, Illustrated Parts catalogs (IPCs), service instructions, service bulletins, and Airworthiness directives (ADs) in both paper print and electronic format.
PSA AirlinesNewAircraft Mechanic PSA AirlinesAircraft MechanicCharlotte, NCJoin our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.
Victory Lane Aviation LLCAviation Maintenance Lead/Senior Technician Victory Lane Aviation LLCAviation Maintenance Lead/Senior TechnicianCharlotte/Concord, NCActual work experience must include troubleshooting, use of specialized tools, ground support equipment, and the use of aircraft maintenance manuals, parts catalogs, technical reports and forms. Completing tasks assigned to himself / herself in accordance with the procedures set forth in VLA’s Repair Station and Quality Control Manual (RSQCM), and / or the FAR’s as applicable.
Air Methods CorpAviation Maintenance Technician 135 Air Methods CorpAviation Maintenance Technician 135Rocky Mount, NCResponsible for validating or confirming the data in the Status Report concerning the aircraft he or she is working on including: Request aviation parts and supplies in order to maintain an adequate and orderly inventory of all stock items to ensure prompt repairs for operational readiness. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractors legal duty to furnish information.
Victory Lane Aviation LLC1st Shift Aviation Maintenance Technician Victory Lane Aviation LLC1st Shift Aviation Maintenance TechnicianCharlotte/Concord, NCCompleting tasks assigned to himself / herself in accordance with the procedures set forth in VLA's various maintenance manuals (Repair Station & Quality Control Manual and Air Carrier Operations General Maintenance Manual). Must be a highly organized and have effective communication skills to efficiently and clearly receive and communicate pass down/hand-off of work in process to include new and completed work.
EagleViewAviation Maintenance Technician II (Burlington NC) EagleViewAviation Maintenance Technician II (Burlington NC)Burlington, North Carolina$26–$32 / hourThe candidate will also be responsible for inspections, repairs, modifications, periodic maintenance, and service of aircraft within the limits of the employee’s Federal Aviation Association (FAA) Airframe & Power Plant (A&P) certificate with respect to Part 91 operations. • Experienced with reading and understanding maintenance manuals, Illustrated Parts catalogs (IPCs), service instructions, service bulletins, and Airworthiness directives (ADs) in both paper print and electronic format.
Victory Lane Aviation LLCAOG Flex Maintenance Technician Victory Lane Aviation LLCAOG Flex Maintenance TechnicianCharlotte/Concord, NC$36–$60The AOG Flex Maintenance Technician works directly with the AOG Manager to ensure AOG, unscheduled and scheduled aircraft are supported at JQF, CLT and surrounding areas. Work experience must include troubleshooting, use of specialized tools, ground support equipment, and the use of aircraft maintenance manuals, parts catalogs, technical reports and forms.
TIMCO Aviation Services IncAviation Maintenance Technician TIMCO Aviation Services IncAviation Maintenance TechnicianGreensboro, NCWhat you will be responsible for: Perform such typical maintenance operations as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting, rigging, and safety wiring to include powerplant, and flight control removal/installation. Headquartered in the Chicago, Illinois area, AAR supports commercial and government customers in more than 100 countries through four operating segments: Parts Supply, Integrated Solutions, Repair and Engineering and Expeditionary Services.
Victory Lane Aviation LLC2nd Shift Aviation Maintenance Technician Victory Lane Aviation LLC2nd Shift Aviation Maintenance TechnicianCharlotte/Concord, NC$32–$40Completing tasks assigned to himself / herself in accordance with the procedures set forth in VLA's various maintenance manuals (Repair Station & Quality Control Manual and Air Carrier Operations General Maintenance Manual). Must be a highly organized and have effective communication skills to efficiently and clearly receive and communicate pass down/hand-off of work in process to include new and completed work.
Republic Services IncMaintenance Shop Technician B Republic Services IncMaintenance Shop Technician BBrowns Summit, NCPOSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. • Tackle a new challenge every day; • Maintain and repair highly intricate and powerful machinery; • Receive training on new technologies and equipment • Work a regular shift in a stable industry • Be recognized for exceptional performance • Serve your community and your customers • Follow strong career paths for professional growth • Enjoy competitive wages and benefits • Join us and help make a positive impact on your community, your environment and your world.
GE AerospaceNewCNC Electro-Mechanical Maintenance Technician - 2nd shift GE AerospaceCNC Electro-Mechanical Maintenance Technician - 2nd shiftWilmington, NCMaintain, diagnose, repair, calibrate, and modify, as assigned, mechanical, electro-mechanical and electronic control systems for CNC machine tools, manufacturing processes, test equipment and other associated equipment. With 600,000 square feet of manufacturing space, 300+ CNC machines, and 21 special processes, we're proud to be the career home of 500+ employees who thrive on purpose and challenge.
INTER-OP NETAircraft Mechanic I - Electrical (2nd Shift) INTER-OP NETAircraft Mechanic I - Electrical (2nd Shift)Elizabeth City, NCFull timeRepair, replace, and rebuild aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. Replace or repair worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment.
INTER-OP NETAircraft Mechanic I - Sheetmetal INTER-OP NETAircraft Mechanic I - SheetmetalElizabeth City, NCFull timeRepair, replace, and rebuild aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. Replace or repair worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment.
Tyonek Native CorporationNewAircraft Mechanic II - Avionics Tyonek Native CorporationAircraft Mechanic II - AvionicsJacksonville, NCMust have the following certifications or qualifications, or the ability to obtain within 90 days from employment: Auxiliary Power Unit (APU); Blade Fold Wing Stow (BFWS); Brake Rider; Egress Certified. Support O/I/D-Level scheduled and unscheduled maintenance to include documentation, troubleshooting, inspections, corrosion prevention/treatment, servicing, lubricating, adjusting and the removal and replacement of aeronautical components.
Airline Maintenance ServiceAircraft Mechanic Airline Maintenance ServiceAircraft MechanicGreensboro, NCAirline Maintenance Service, Inc. (AMS) is looking for several certificated A/P's to become part of our growing team in GSO, CLT, COU, and BNA. Drug screening and background check are part of our hiring process and are required to access secure areas of airports if required.
The Structures Company, LLCAircraft Structures Sealant Mechanic (C01XN3) The Structures Company, LLCAircraft Structures Sealant Mechanic (C01XN3)Kinston, NCJOB TITLE: Aircraft Structures ?Sealant MechanicLOCATION: Kinston, NCPAY RATE: $34.00/hourWe are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier aerospace and defense company. As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense.
The Structures Company, LLC787 A&P Avionics/Electrical Technician - $5K Bonus The Structures Company, LLC787 A&P Avionics/Electrical Technician - $5K BonusCharlotte, NC$29–$36 / hourEducation and experience typically acquired through basic education (e.g., High School diploma or GED) and typically 1+ years of related work experience, or an equivalent combination of education and experience (e.g., vocational training or Associate degree). Assist in troubleshooting pneumatic, hydraulic, electrical, and avionics systems to isolate mechanical and/or electrical/electronic faults and support repair of faulty components.
The Structures Company, LLCElectrical & Electronic Functional Test Technician (Early Career) - $5K Relocation Bonus The Structures Company, LLCElectrical & Electronic Functional Test Technician (Early Career) - $5K Relocation BonusCharlotte, NC$26–$31 / hourAbility to meet physical requirements: flexion/extension (head bent down/up), kneeling, bending at the waist, reaching overhead, twisting, standing, walking, climbing/balancing (stairs, ladders, scaffolding), crawling, and crouching. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries.
Mountain Air CargoNewMaintenance Training Instructor Mountain Air CargoMaintenance Training InstructorKinston, NCResponsible to assure training documentation is maintained properly and made available as needed to meet required criteria for continued airworthiness. Assure Company maintenance personnel are qualified and available to meet the Maintenance Department needs and to assure continued airworthiness of MAC aircraft.
Victory Lane Aviation LLCAOG Maintenance Coordinator Victory Lane Aviation LLCAOG Maintenance CoordinatorCharlotte/Concord, NC$90,000This role serves as the central point of contact for VLA’s Part 135, external customers, mobile field technicians, logistics providers, and internal departments to ensure timely, compliant, and efficient return-to-service during AOG events. Ensure dispatched personnel hold appropriate Federal Aviation Administration (FAA) Airframe and Powerplant (A&P) License, company authorizations, and training currency.
The Structures Company787 A&P Avionics/Electrical Technician - $5K Bonus The Structures Company787 A&P Avionics/Electrical Technician - $5K BonusCharlotte, NC$29–$36 / hourEducation and experience typically acquired through basic education (e.g., High School diploma or GED) and typically 1+ years of related work experience, or an equivalent combination of education and experience (e.g., vocational training or Associate degree). Assist in troubleshooting pneumatic, hydraulic, electrical, and avionics systems to isolate mechanical and/or electrical/electronic faults and support repair of faulty components.
Victory Lane Aviation LLCAviation Director of Maintenance (DOM) Victory Lane Aviation LLCAviation Director of Maintenance (DOM)Charlotte/Concord, NCActual work experience must include troubleshooting, use of specialized tools, ground support equipment, and the use of aircraft maintenance manuals, parts catalogs, technical reports and forms. This role involves leading a team, managing budgets, developing maintenance programs, and maintaining strong relationships with VLA customers.
Victory Lane Aviation LLCAviation Avionics Technician Victory Lane Aviation LLCAviation Avionics TechnicianCharlotte/Concord, NCActual work experience must include troubleshooting, use of specialized tools, ground support equipment, and the use of aircraft maintenance manuals, parts catalogs, technical reports and forms. Duties include the following (other duties may be assigned as required by management): Responsible for installing, inspecting, testing, adjusting, and repairing electronic equipment on aircraft.
MHC KenworthNewDiesel Service Technician / Mechanic MHC KenworthDiesel Service Technician / MechanicRaleigh, NCAny person performing the position while under the influence of marijuana or any other illegal drug may constitute a threat to health or safety or in which a lapse of attention could result in injury, illness, or death, including without limitation a position that includes the operating, repairing, maintaining, or monitoring of heavy equipment, machinery, aircraft, motorized watercraft, or motor vehicles or handling of hazardous materials and/or waste as part of the job duties. Gains experience by working on the following items with minimal supervision: engine overhaul, fuel systems, electrical systems, transmissions, cooling systems, chassis, brakes, engine tune-up, and general maintenance.
Harnett County, North CarolinaLine Technician- Part Time- Harnett Regional Jetport Harnett County, North CarolinaLine Technician- Part Time- Harnett Regional JetportLillington, NCWORK ENVIRONMENT: The employee works under both indoor and outside environmental conditions; is exposed to significant noise and vibrations and physical conditions such as proximity to moving mechanical part and electrical current; works in high places, narrow aisles, crawl spaces, and areas which could cause claustrophobia; and has exposure to high heat, chemicals, oils, fumes, dusts, odors, or poor ventilation. Semi-skilled work abilities related to the needs of clients and airport facilities; performs routine checks of the airport and is responsible for guiding, towing, parking, greeting and organizing aircraft that arrive and/or depart from the airport gate or ramp.
Amentum Services IncAvionics Technician II (Cherry Point, NC) Amentum Services IncAvionics Technician II (Cherry Point, NC)Cherry Point, NCWork typically requires an understanding of the interrelationships of circuits exercising independent judgment in performing such tasks as making circuit analyses calculating wave forms and tracing relationships in signal flow using complex test instruments such as high frequency pulse generators frequency synthesizers distortion analyzers and complex computer control equipment. Must be eligible to gain and maintain one of the following IAT Level II certifications CCNA Security CySA GICSP Security CE SSCP or GSEC IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or before second deployment.
Fly Exclusive, LLCAOG Hangar Technician Fly Exclusive, LLCAOG Hangar TechnicianKinston, NCWhile performing the duties of this job, employees are frequently exposed to fumes or airborne particles, moving mechanical parts, vibrations, and loud noise levels both inside and outside the hangar. The ideal candidate thrives in a fast-paced, high-pressure environment, possesses deep knowledge of aircraft systems, engines, and structures, and is willing to travel approximately 25% of the time to support AOG events.