52 Results for

Assembler Jobs in Clearwater, FL

Jobs

Oldsmar, FL11 days ago

$20–$25 Per Hour

Job Summary: We are seeking a highly skilled Solder assembler to join our team, specializing in advanced rework on circuit card assemblies and knowledge of mechanical assembly related to circuit cards. Key Responsibilities: • Perform advanced rework on circuit card assemblies, including but not limited to: • BGA (Ball Grid Array) reballing and replacement.

Oldsmar, FL13 days ago

$18–$30 Per Hour

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

New!

Oldsmar, FL5 days ago

$18–$30 Per Hour

Oldsmar, FL18 days ago

$24–$27 Per Hour

The ideal candidate will be proficient in reworking and repairing a wide range of components-including bottom?terminated devices such as QFNs, BGAs, and LGAs-using advanced rework equipment and X?ray inspection methods. Remove, replace, and re?work components, including bottom?terminated devices (QFNs, BGAs, LGAs) using hot?air pencils, hot plates, reflow ovens, and specialty rework stations.

Oldsmar, FL11 days ago

$18–$25 Per Hour

Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. We are seeking a detail oriented Cable Harness and Soldering Assembler with a high mechanical aptitude.

Oldsmar, FL7 days ago

$23–$26 Per Hour

The successful candidate will be responsible for assembling printed circuit boards (PCBs) by soldering a wide variety of components, performing defect identification, and ensuring all work meets stringent quality and reliability requirements. * Conduct visual inspections and use inspection tools (e.g., microscopes, AOI) to identify solder defects such as bridges, cold joints, tombstoning, insufficient wetting, and voids.

Oldsmar, FL11 days ago

$24–$27 Per Hour

The ideal candidate will be proficient in reworking and repairing a wide range of components—including bottom terminated devices such as QFNs, BGAs, and LGAs—using advanced rework equipment and X ray inspection methods. Remove, replace, and re work components, including bottom terminated devices (QFNs, BGAs, LGAs) using hot air pencils, hot plates, reflow ovens, and specialty rework stations.

Pinellas Park, FL11 days ago

Must have experience using hand tools (i.e. torque wrench, drills and inspection tools, riveting tools, and various other hand tools). Seeking 2nd shift aircraft assemblers with the availability to work OT on the weekends depending on business needs.

Pinellas Park, FL11 days ago

$16–$18 Per Hour

Must have experience using hand tools (i.e. torque wrench, drills and inspection tools, riveting tools, and various other hand tools). Seeking two 1st shift aircraft assemblers with the availability to work OT on the weekends depending on business needs.

Pinellas Park, FL10 days ago

Must have experience using hand tools (i.e. torque wrench, drills and inspection tools, riveting tools, and various other hand tools). Experience with locating holes from blueprints by hand Client out, required tooling, and/or technology-based platforms.

New!

Oldsmar, FLToday

$18–$25 Per Hour

The successful candidate will be an expert in both surface mount technology (SMT) and through hole soldering, with a proven track record of removing, repairing, and replacing a wide variety of components-including bottom terminated parts such as QFNs, BGAs, and LGAs. Execute removal, replacement, and repair of bottom terminated components (QFNs, BGAs, LGAs) using hot air pencils, hot plates, and other rework tools.

Clearwater, FL30+ days ago

This is a hands-on production role supporting assembly, soldering, inspection, testing, and rework of electronic and electromechanical products in a fast-paced manufacturing environment. We are looking for candidates with strong soldering skills, attention to detail, and experience working with PCBs, small mechanical assemblies, and precision electronic components.

Clearwater, FL30+ days ago

This is a hands-on production role supporting the assembly, soldering, testing, and inspection of electronic and mechanical assemblies in a fast-paced manufacturing environment. The Panther Group is seeking an Electronic Assembler for an exciting long-term opportunity with a leading aerospace and defense manufacturing company in Clearwater, FL.

New!

Clearwater, FL2 days ago

$55,000–$78,000 Per Year

We are seeking Electro Mechanical Assemblers for Clearwater and Tampa, FL locations, offering both 1st and 2nd shift temp-to-hire opportunities with excellent benefits. At least 2 years of electronic assembly experience, including wiring, cable harnessing, and soldering.

Clearwater, FL29 days ago

Able to sit at a work station for 8 hours, with breaks while occasionally bending, stooping, and twisting and do repetitive work 2 to 4 hours at a time. Description: About the position: Assemble low-power electronic components accurately while maintaining highest quality and.

Oldsmar, FL30+ days ago

The ideal candidate will be experienced in handling bottom-terminated components (QFNs, BGAs, LGAs) and performing high-precision work under a microscope using specialized rework and inspection equipment. This role requires expertise in both surface-mount technology (SMT) and through-hole soldering, with strong capability in advanced rework and repair of complex PCB assemblies.

Oldsmar, FL30+ days ago

Remove, replace, and rework components, including bottom-terminated devices (QFNs, BGAs, LGAs), using hot-air tools, hot plates, reflow ovens, and specialized rework stations. As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense.

Clearwater, FL30+ days ago

We are looking for candidates with strong attention to detail, steady hands, and experience working with SMT and through-hole components, including fine-pitch and high-density assemblies. This role focuses on advanced soldering, rework, and inspection of complex circuit board assemblies, supporting aerospace and defense-related production.

New!

Oldsmar, FL5 days ago

$18–$24 Per Hour

Tampa, FL30+ days ago

As a Flight Simulator Mechanic, you will work hands-on with advanced simulator systems, structural components, motion platforms, and integrated mechanical assemblies that replicate real-world aircraft environments. Assemble, install, and modify flight simulator structural and mechanical components including control linkages, throttle systems, consoles, cabinets, fuselage components, and motion system actuators.

Pinellas Park, FL7 days ago

$22.66

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Experience using hand tools including torque wrenches, drills, inspection tools, riveting tools, and similar equipment.

Pinellas Park, FL7 days ago

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Utilize hand tools and precision equipment including torque wrenches, drills, riveting tools, inspection tools, and other assembly equipment.

Pinellas Park, FL7 days ago

$22.66

Oldsmar, FL30+ days ago

Operate automated pick-and-place machines (e.g., Juki, Fuji, Samsung); load/unload boards, feeders, and solder paste printers. As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense.

Oldsmar, FL15 days ago

New!

Oldsmar, FL5 days ago

$22–$26 Per Hour

Responsibilities:Perform advanced rework on circuit card assemblies, including but not limited to: Utilize various soldering techniques, including hand soldering and reflow soldering. IPC (Institute for Printed Circuits) certification in soldering and rework (e.g., IPC-A-610, IPC-7711/7721).

New!

Oldsmar, FL5 days ago

$22–$26 Per Hour

Responsibilities:Perform advanced rework on circuit card assemblies, including but not limited to: BGA (Ball Grid Array) reballing and replacement. IPC (Institute for Printed Circuits) certification in soldering and rework (e.g., IPC-A-610, IPC-7711/7721).

Oldsmar, FL30+ days ago

$23–$26 Per Hour

The successful candidate will be responsible for assembling printed circuit boards (PCBs) by soldering a wide variety of components, performing defect identification, and ensuring all work meets stringent quality and reliability requirements. • Conduct visual inspections and use inspection tools (e.g., microscopes, AOI) to identify solder defects such as bridges, cold joints, tombstoning, insufficient wetting, and voids.

Clearwater, FL30+ days ago

Full-time

This job is with Encode, Inc a fully owned subsidiary of Lancesoft** Job Description: The Assembler II is responsible for performing a variety of moderately complex assembly tasks in support of Department of Defense (DoD) electronic products and systems. 1st Shift (6:00am - 2:30pm Mon - Fri) Pay Rate: $22/hr Key Responsibilities: • Assemble electronic components, wiring, and hardware into sub-assemblies and final products in accordance with engineering drawings, schematics, and written instructions.

Clearwater, FL30+ days ago

Full-time

Description: 1st Shift (6:00am - 2:30pm Mon - Fri) The Assembler II is responsible for performing a variety of moderately complex assembly tasks in support of Department of Defense (DoD) electronic products and systems. Key Responsibilities: • Assemble electronic components, wiring, and hardware into sub-assemblies and final products in accordance with engineering drawings, schematics, and written instructions.

New!

Oldsmar, FL6 days ago

The ideal candidate will be proficient in reworking and repairing a wide range of componentsincluding bottom?terminated devices such as QFNs, BGAs, and LGAsusing advanced rework equipment and X?ray inspection methods. Remove, replace, and re?work components, including bottom?terminated devices (QFNs, BGAs, LGAs) using hot?air pencils, hot plates, reflow ovens, and specialty rework stations.

Oldsmar, FL27 days ago

We are seeking a detail oriented Cable Harness and Soldering Assembler with a high mechanical aptitude.

Oldsmar, FL22 days ago

Clearwater, FL29 days ago

Assembly requires riveting using a compressed air rivet gun, siliconing parts, twisting . Job Duties include, but not limited to: Perform assembly operations to build light fixtures and accessories with quality in .

Oldsmar, FL30+ days ago

Full-time

The incumbent will assemble printed circuit boards (PCBs) using surface mount technology, perform in process inspections, and ensure that every product meets our rigorous quality and reliability requirements. • Perform manual rework and hand soldering for components that require special handling (BGAs, QFNs, fine pitch).

Clearwater, FL30+ days ago

If you have experience identifying solder defects, performing touch-up/rework, and working in a fast-paced electronics production environment, we want to hear from you. This is a hands-on role for candidates with strong soldering skills, SMT assembly experience, and a sharp eye for quality.

Oldsmar, FL30+ days ago

Pinellas Park, FL8 days ago

$22.26–$26 Per Hour

Pinellas Park, FL8 days ago

$22.26–$26 Per Hour

Pinellas Park, FL8 days ago

$25–$30 Per Hour

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Utilize hand tools and precision equipment including torque wrenches, drills, riveting tools, inspection tools, and other assembly equipment.

CLEARWATER, FL12 days ago

With a legacy dating back more than 350 years, Saint-Gobain offers employees the stability and security of a leading Global 500 corporation while operating like multiple small and agile start-ups, where entrepreneurial spirit, pioneering teamwork, and bold, forward-thinking ideas pave new paths.-. Within its Life Sciences division, teams are solving critical problems for customers who are getting life-saving medical devices to the front lines of healthcare, discovering essential medications, and nourishing and connecting the world through consumer, industrial and electronics applications.

Oldsmar, FL25 days ago

Full-time

We are seeking a detail oriented Cable Harness and Soldering Assembler with a high mechanical aptitude. US Citizenship/Permanent Resident Required.

New!

Oldsmar, FL2 days ago

Operate dispensing and coating machines to meet customer specifications, including masking circuit boards and inspecting coatings for quality. • Maintain and clean machines, change fluids, and perform manual touch-ups for consistent high-quality coatings.

New!

Oldsmar, FL5 days ago

$18–$25 Per Hour

Our Client, an Aerospace and Defense company, is looking for a Cable Assembler for their Oldsmar, FL location. Technical Skills Electro-mechanical sensors and actuators Yes 1 .

New!

Largo, FL2 days ago

Candidates should have a high school diploma, with at least one year of experience in soldering or electromechanical assembly, and be skilled in component identification, interpreting blueprints, and using tools such as soldering irons, microscopes, and hand tools. This role involves assembling electronic components, subassemblies, and products, often working independently with minimal supervision.

New!

Largo, FL2 days ago

Requires a high school diploma, with at least one year of experience in PC board assembly, component identification, blueprint reading, and precision soldering (IPC-A-610C). Performs electromechanical assembly tasks involving electronic components, subassemblies, and systems, often working independently with minimal supervision.

New!

Largo, FL2 days ago

Essential duties include following work instructions, setting up and operating assembly machines, crimping, connecting wires to PCBs, identifying components, preparing parts, hand assembly, and maintaining a clean work environment. This position supports infrastructure solutions for power and utility markets and emphasizes sustainable, ethical, and inclusive work practices.

New!

Oldsmar, FL5 days ago

The ideal candidate will be proficient in reworking and repairing a wide range of components—including bottom‑terminated devices such as QFNs, BGAs, and LGAs—using advanced rework equipment and X‑ray inspection methods. Remove, replace, and re‑work components, including bottom‑terminated devices (QFNs, BGAs, LGAs) using hot‑air pencils, hot plates, reflow ovens, and specialty rework stations.

Tampa, FL11 days ago

$20–$28

We are the trusted provider to the world's largest brands like Walmart, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers in 2023.

New!

Pinellas Park, FL2 days ago

The role involves assembling, aligning, drilling, fitting, and repairing aircraft parts using blueprints, tools, and controlled tooling. Join a dynamic team in the Tampa Bay area as an Aircraft Parts Assembler, contributing to aerospace manufacturing and refurbishment.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Assembler job opportunities. Plus, receive relevant job recommendations in your inbox.

Assembler Jobs in Clearwater, FL

Soldering Assembler Nesco Resource

Assembler - 2nd Shift Butler Aerospace and Defense

Assembler Butler Aerospace and Defense

Solder Assembler - 2nd Shift Butler Aerospace and Defense

Cable Assembler - 2nd Shift Butler Aerospace and Defense

Assembler-2nd Shift Butler Aerospace and Defense

Soldering Assembler - 2nd Shift Nesco Resource

Aircraft Assembler - 2nd Shift Butler Aerospace and Defense

Aircraft Assembler Butler Aerospace and Defense

F16 Aircraft Assembler Butler Aerospace and Defense

Solder Assembler Butler Aerospace and Defense

Electronic Assembler II - 2nd Shift The Panther Group

Electronic Assembler The Panther Group

Electro Mechanical Assembler SNI USA

Electronic Assembler Total Staffing Solutions

Solder Assembler -1st Shift The Structures Company, LLC

Solder Assembler - 2nd Shift The Structures Company, LLC

Advanced Solder Assembler The Panther Group

Assembler Iconma

Mechanical Assembler The Staffing Resource Group, Inc

Aircraft Assembler - 1st Shift The Structures Company, LLC

F16 Aircraft Assembler The Structures Company, LLC

Aircraft Assembler - 2nd Shift The Structures Company, LLC

SMT Assembler The Structures Company, LLC

Assembler Lancesoft

PCB/ Electromechanical Assembler Iconma

Assembler / Solder Technician Iconma

Assembler-2nd Shift PlanIT Group

Assembler - Level 2 LanceSoft Inc

US- DOD - Assembler - Level 2 LanceSoft Inc

Light Industrial - Assembler-2nd Shift The Structures Company, LLC

Light Industrial - Cable Assembler The Structures Company, LLC

Solder Assembler -1st Shift The Structures Company

General Assembler Total Staffing Solutions

Assembler Donatech Corporation

Solder Assembler The Panther Group

Assembler PlanIT Group

Aircraft Assembler - 2nd Shift The Structures Company

Aircraft Assembler - 1st Shift The Structures Company

F16 Aircraft Assembler The Structures Company

Assembler - 2nd Shift Saint-Gobain

Cable Assembler Donatech Corporation

PCB Assembler - 1st shift NESCO Rentals

Cable Assembler Iconma

Assembler - Manufacturing Hubbell Incorporated

Final Assembler - Largo, FL Hubbell Incorporated

Assembler - Hiring Now Hubbell Incorporated

Light Industrial - Assembler-2nd Shift The Structures Company

Product Assembler Technician (IHC) National Assemblers

Entry Level Aircraft Assembler - 1st Shift Lockheed Martin Corporation

Resume Resources