54 Results for

Assembler Jobs in Tampa, FL

Jobs

Oldsmar, FL12 days ago

$20–$25 Per Hour

Job Summary: We are seeking a highly skilled Solder assembler to join our team, specializing in advanced rework on circuit card assemblies and knowledge of mechanical assembly related to circuit cards. Key Responsibilities: • Perform advanced rework on circuit card assemblies, including but not limited to: • BGA (Ball Grid Array) reballing and replacement.

New!

Oldsmar, FLToday

$18–$30 Per Hour

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

New!

Oldsmar, FL6 days ago

$18–$30 Per Hour

New!

Oldsmar, FL4 days ago

$23–$26 Per Hour

The successful candidate will be responsible for assembling printed circuit boards (PCBs) by soldering a wide variety of components, performing defect identification, and ensuring all work meets stringent quality and reliability requirements. • Conduct visual inspections and use inspection tools (e.g., microscopes, AOI) to identify solder defects such as bridges, cold joints, tombstoning, insufficient wetting, and voids.

Oldsmar, FL19 days ago

$24–$27 Per Hour

The ideal candidate will be proficient in reworking and repairing a wide range of components-including bottom?terminated devices such as QFNs, BGAs, and LGAs-using advanced rework equipment and X?ray inspection methods. Remove, replace, and re?work components, including bottom?terminated devices (QFNs, BGAs, LGAs) using hot?air pencils, hot plates, reflow ovens, and specialty rework stations.

Oldsmar, FL12 days ago

$18–$25 Per Hour

Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. We are seeking a detail oriented Cable Harness and Soldering Assembler with a high mechanical aptitude.

Oldsmar, FL8 days ago

$23–$26 Per Hour

The successful candidate will be responsible for assembling printed circuit boards (PCBs) by soldering a wide variety of components, performing defect identification, and ensuring all work meets stringent quality and reliability requirements. * Conduct visual inspections and use inspection tools (e.g., microscopes, AOI) to identify solder defects such as bridges, cold joints, tombstoning, insufficient wetting, and voids.

New!

Oldsmar, FL5 days ago

Oldsmar, FL12 days ago

$24–$27 Per Hour

The ideal candidate will be proficient in reworking and repairing a wide range of components—including bottom terminated devices such as QFNs, BGAs, and LGAs—using advanced rework equipment and X ray inspection methods. Remove, replace, and re work components, including bottom terminated devices (QFNs, BGAs, LGAs) using hot air pencils, hot plates, reflow ovens, and specialty rework stations.

Pinellas Park, FL12 days ago

$16–$18 Per Hour

Must have experience using hand tools (i.e. torque wrench, drills and inspection tools, riveting tools, and various other hand tools). Seeking two 1st shift aircraft assemblers with the availability to work OT on the weekends depending on business needs.

Pinellas Park, FL12 days ago

Must have experience using hand tools (i.e. torque wrench, drills and inspection tools, riveting tools, and various other hand tools). Seeking 2nd shift aircraft assemblers with the availability to work OT on the weekends depending on business needs.

Pinellas Park, FL11 days ago

Must have experience using hand tools (i.e. torque wrench, drills and inspection tools, riveting tools, and various other hand tools). Experience with locating holes from blueprints by hand Client out, required tooling, and/or technology-based platforms.

New!

Oldsmar, FL1 day ago

$18–$25 Per Hour

The successful candidate will be an expert in both surface mount technology (SMT) and through hole soldering, with a proven track record of removing, repairing, and replacing a wide variety of components-including bottom terminated parts such as QFNs, BGAs, and LGAs. Execute removal, replacement, and repair of bottom terminated components (QFNs, BGAs, LGAs) using hot air pencils, hot plates, and other rework tools.

Clearwater, FL30+ days ago

This is a hands-on production role supporting assembly, soldering, inspection, testing, and rework of electronic and electromechanical products in a fast-paced manufacturing environment. We are looking for candidates with strong soldering skills, attention to detail, and experience working with PCBs, small mechanical assemblies, and precision electronic components.

Clearwater, FL30+ days ago

This is a hands-on production role supporting the assembly, soldering, testing, and inspection of electronic and mechanical assemblies in a fast-paced manufacturing environment. The Panther Group is seeking an Electronic Assembler for an exciting long-term opportunity with a leading aerospace and defense manufacturing company in Clearwater, FL.

New!

Clearwater, FLToday

$55,000–$78,000 Per Year

Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using soldering. We are seeking electro-mechanical assemblers to assemble cutting-edge products in a fast-paced manufacturing environment.

Clearwater, FL30 days ago

Able to sit at a work station for 8 hours, with breaks while occasionally bending, stooping, and twisting and do repetitive work 2 to 4 hours at a time. Description: About the position: Assemble low-power electronic components accurately while maintaining highest quality and.

Oldsmar, FL30+ days ago

The ideal candidate will be experienced in handling bottom-terminated components (QFNs, BGAs, LGAs) and performing high-precision work under a microscope using specialized rework and inspection equipment. This role requires expertise in both surface-mount technology (SMT) and through-hole soldering, with strong capability in advanced rework and repair of complex PCB assemblies.

Oldsmar, FL30+ days ago

Remove, replace, and rework components, including bottom-terminated devices (QFNs, BGAs, LGAs), using hot-air tools, hot plates, reflow ovens, and specialized rework stations. As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense.

Clearwater, FL30+ days ago

We are looking for candidates with strong attention to detail, steady hands, and experience working with SMT and through-hole components, including fine-pitch and high-density assemblies. This role focuses on advanced soldering, rework, and inspection of complex circuit board assemblies, supporting aerospace and defense-related production.

Tampa, FL30+ days ago

As a Flight Simulator Mechanic, you will work hands-on with advanced simulator systems, structural components, motion platforms, and integrated mechanical assemblies that replicate real-world aircraft environments. Assemble, install, and modify flight simulator structural and mechanical components including control linkages, throttle systems, consoles, cabinets, fuselage components, and motion system actuators.

New!

Oldsmar, FL6 days ago

$18–$24 Per Hour

Pinellas Park, FL8 days ago

$22.66

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Experience using hand tools including torque wrenches, drills, inspection tools, riveting tools, and similar equipment.

Pinellas Park, FL8 days ago

$22.66

Pinellas Park, FL8 days ago

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Utilize hand tools and precision equipment including torque wrenches, drills, riveting tools, inspection tools, and other assembly equipment.

Oldsmar, FL30+ days ago

Operate automated pick-and-place machines (e.g., Juki, Fuji, Samsung); load/unload boards, feeders, and solder paste printers. As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense.

New!

Largo, FLToday

We are looking for an experienced Manufacturing Assembler Level I that has precision, speed, reliability and excellent teamwork skills. DITEK, a leader in surge protection solutions, is proud to have been voted one of Tampa Bay's Top Workplaces for 16 years in a row.

New!

Oldsmar, FL6 days ago

$22–$26 Per Hour

Responsibilities:Perform advanced rework on circuit card assemblies, including but not limited to: Utilize various soldering techniques, including hand soldering and reflow soldering. IPC (Institute for Printed Circuits) certification in soldering and rework (e.g., IPC-A-610, IPC-7711/7721).

New!

Oldsmar, FL6 days ago

$22–$26 Per Hour

Responsibilities:Perform advanced rework on circuit card assemblies, including but not limited to: BGA (Ball Grid Array) reballing and replacement. IPC (Institute for Printed Circuits) certification in soldering and rework (e.g., IPC-A-610, IPC-7711/7721).

Oldsmar, FL7 days ago

The ideal candidate will be proficient in reworking and repairing a wide range of componentsincluding bottom?terminated devices such as QFNs, BGAs, and LGAsusing advanced rework equipment and X?ray inspection methods. Remove, replace, and re?work components, including bottom?terminated devices (QFNs, BGAs, LGAs) using hot?air pencils, hot plates, reflow ovens, and specialty rework stations.

Oldsmar, FL28 days ago

We are seeking a detail oriented Cable Harness and Soldering Assembler with a high mechanical aptitude.

Clearwater, FL30+ days ago

Full-time

This job is with Encode, Inc a fully owned subsidiary of Lancesoft** Job Description: The Assembler II is responsible for performing a variety of moderately complex assembly tasks in support of Department of Defense (DoD) electronic products and systems. 1st Shift (6:00am - 2:30pm Mon - Fri) Pay Rate: $22/hr Key Responsibilities: • Assemble electronic components, wiring, and hardware into sub-assemblies and final products in accordance with engineering drawings, schematics, and written instructions.

Clearwater, FL30+ days ago

Full-time

Description: 1st Shift (6:00am - 2:30pm Mon - Fri) The Assembler II is responsible for performing a variety of moderately complex assembly tasks in support of Department of Defense (DoD) electronic products and systems. Key Responsibilities: • Assemble electronic components, wiring, and hardware into sub-assemblies and final products in accordance with engineering drawings, schematics, and written instructions.

Oldsmar, FL15 days ago

$18–$24 Per Hour
Full-time

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Title: Assembler Duration: 12+ months Location: Oldsmar, FL Pay Range: $18.00 - $24.00 Hourly / W2 Work Schedule: 4/10-1st Shift Shift hours are Mon-Thurs 5 AM-3:30 PM EST Soldering wires to terminals and PCBs a must!

Oldsmar, FL23 days ago

Oldsmar, FL30+ days ago

Full-time

The incumbent will assemble printed circuit boards (PCBs) using surface mount technology, perform in process inspections, and ensure that every product meets our rigorous quality and reliability requirements. • Perform manual rework and hand soldering for components that require special handling (BGAs, QFNs, fine pitch).

Clearwater, FL30 days ago

Assembly requires riveting using a compressed air rivet gun, siliconing parts, twisting . Job Duties include, but not limited to: Perform assembly operations to build light fixtures and accessories with quality in .

Clearwater, FL30+ days ago

If you have experience identifying solder defects, performing touch-up/rework, and working in a fast-paced electronics production environment, we want to hear from you. This is a hands-on role for candidates with strong soldering skills, SMT assembly experience, and a sharp eye for quality.

New!

Pinellas Park, FLToday

$22.66–$26 Per Hour

The Aircraft Assembler will support aircraft production by performing hands-on assembly work using drawings, work instructions, hand tools, inspection tools, torque wrenches, drills, riveting tools, and related manufacturing equipment. Experience with aircraft assembly, airframe assembly, riveting, drilling, torque tools, inspection tools, manufacturing work instructions, and aerospace production.

New!

Oldsmar, FLToday

$18–$25 Per Hour

PGS Worldwide is seeking a Cable Harness and Soldering Assembler in Oldsmar, Florida for a one-year contract-to-hire role supporting a leading aerospace & defense company. As a Veteran Founded company, we know that the military has given you the skills and training you need to succeed in positions like this, and we want to support your success in the civilian sector however we can.

CLEARWATER, FL13 days ago

With a legacy dating back more than 350 years, Saint-Gobain offers employees the stability and security of a leading Global 500 corporation while operating like multiple small and agile start-ups, where entrepreneurial spirit, pioneering teamwork, and bold, forward-thinking ideas pave new paths.-. Within its Life Sciences division, teams are solving critical problems for customers who are getting life-saving medical devices to the front lines of healthcare, discovering essential medications, and nourishing and connecting the world through consumer, industrial and electronics applications.

Pinellas Park, FL9 days ago

$22.26–$26 Per Hour

Pinellas Park, FL9 days ago

$25–$30 Per Hour

As trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Utilize hand tools and precision equipment including torque wrenches, drills, riveting tools, inspection tools, and other assembly equipment.

Pinellas Park, FL9 days ago

$22.26–$26 Per Hour

Oldsmar, FL26 days ago

Full-time

We are seeking a detail oriented Cable Harness and Soldering Assembler with a high mechanical aptitude. US Citizenship/Permanent Resident Required.

New!

Oldsmar, FLToday

Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of components and assemblies, inclusive of all finishing processes. • Remove any excess coating and perform manual touch-up of any areas the coating machine may miss so boards maintain a consistent high quality.

New!

Oldsmar, FL6 days ago

$18–$25 Per Hour

Our Client, an Aerospace and Defense company, is looking for a Cable Assembler for their Oldsmar, FL location. Technical Skills Electro-mechanical sensors and actuators Yes 1 .

New!

Oldsmar, FL6 days ago

The ideal candidate will be proficient in reworking and repairing a wide range of components—including bottom‑terminated devices such as QFNs, BGAs, and LGAs—using advanced rework equipment and X‑ray inspection methods. Remove, replace, and re‑work components, including bottom‑terminated devices (QFNs, BGAs, LGAs) using hot‑air pencils, hot plates, reflow ovens, and specialty rework stations.

Tampa, FL12 days ago

$20–$28

We are the trusted provider to the world's largest brands like Walmart, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers in 2023.

New!

Oldsmar, FL6 days ago

$18–$25 Per Hour

The successful candidate will be an expert in both surface mount technology (SMT) and through hole soldering, with a proven track record of removing, repairing, and replacing a wide variety of components including bottom terminated parts such as QFNs, BGAs, and LGAs. Execute removal, replacement, and repair of bottom terminated components (QFNs, BGAs, LGAs) using hot air pencils, hot plates, and other rework tools.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Assembler job opportunities. Plus, receive relevant job recommendations in your inbox.

Assembler Jobs in Tampa, FL

Soldering Assembler Nesco Resource

Assembler - 2nd Shift Butler Aerospace and Defense

Assembler Butler Aerospace and Defense

Assembler-2nd Shift PlanIT Group

Solder Assembler - 2nd Shift Butler Aerospace and Defense

Cable Assembler - 2nd Shift Butler Aerospace and Defense

Assembler-2nd Shift Butler Aerospace and Defense

Assembler PlanIT Group

Soldering Assembler - 2nd Shift Nesco Resource

Aircraft Assembler Butler Aerospace and Defense

Aircraft Assembler - 2nd Shift Butler Aerospace and Defense

F16 Aircraft Assembler Butler Aerospace and Defense

Solder Assembler Butler Aerospace and Defense

Electronic Assembler II - 2nd Shift The Panther Group

Electronic Assembler The Panther Group

Electro Mechanical Assembler SNI USA

Electronic Assembler Total Staffing Solutions

Solder Assembler -1st Shift The Structures Company, LLC

Solder Assembler - 2nd Shift The Structures Company, LLC

Advanced Solder Assembler The Panther Group

Mechanical Assembler The Staffing Resource Group, Inc

Assembler Iconma

Aircraft Assembler - 1st Shift The Structures Company, LLC

Aircraft Assembler - 2nd Shift The Structures Company, LLC

F16 Aircraft Assembler The Structures Company, LLC

SMT Assembler The Structures Company, LLC

MANUFACTURING ASSEMBLER I DTI

PCB/ Electromechanical Assembler Iconma

Assembler / Solder Technician Iconma

Light Industrial - Assembler-2nd Shift The Structures Company, LLC

Light Industrial - Cable Assembler The Structures Company, LLC

Assembler - Level 2 LanceSoft Inc

US- DOD - Assembler - Level 2 LanceSoft Inc

Assembler LanceSoft Inc

Solder Assembler -1st Shift The Structures Company

Assembler Donatech Corporation

General Assembler Total Staffing Solutions

Solder Assembler The Panther Group

Aircraft Assembler PGS Worldwide

Cable Harness and Soldering Assembler PGS Worldwide

Assembler - 2nd Shift Saint-Gobain

Aircraft Assembler - 2nd Shift The Structures Company

F16 Aircraft Assembler The Structures Company

Aircraft Assembler - 1st Shift The Structures Company

Cable Assembler Donatech Corporation

PCB Assembler - 1st shift NESCO Rentals

Cable Assembler Iconma

Light Industrial - Assembler-2nd Shift The Structures Company

Product Assembler Technician (IHC) National Assemblers

Solder Assembler(SMT) Iconma

Resume Resources