Aviation Director El Paso County, TexasAviation DirectorEl Paso, TX$250,000–$270,000 / yearAviation, Security, and Regulatory Expertise - Success in this role requires a solid grounding in commercial-service airport operations, airport planning, FAA and TSA requirements, emergency management, risk mitigation, environmental compliance, airfield and facility maintenance, airport finance, lease management, concessions, capital planning, and the operational requirements needed to protect safety, security, and regulatory compliance. Community-Focused and Politically Aware - The candidate must be able to work in a highly visible municipal environment and balance the needs of City leadership, elected officials, employees, airlines, tenants, passengers, public safety partners, Fort Bliss, Destination El Paso, economic development organizations, community institutions, and the broader binational region.
Training Specialist Aviation (SUAS/C-SUAS TRAINING INSTRUCTOR) United States Air ForceTraining Specialist Aviation (SUAS/C-SUAS TRAINING INSTRUCTOR)TX$89,508–$138,370 / yearThe primary purpose of this position is to serve as a Training Specialist developing programs of instruction for the Small Unmanned Aerial Systems and Counter- Small Unmanned Aerial Systems for the Training and Air Operations Branch of the Air Force Security Forces Center, Detachment 3, a Primary Sub Unit (PSU) of the Air Force Installations and Mission Support Center. Expert knowledge of military, Federal Aviation Administration or International Civil Aviation Organization (ICAO) SUAS regulations and operating procedures, expert knowledge of flight operations (manned or unmanned) and working knowledge of fixed and deployable C-SUAS equipment and technology is critical to the successful performance of the work.
Traveling Project Manager- Aviation J.E. Dunn Construction Group IncTraveling Project Manager- AviationTXValid and unrestricted drivers license required Must be able to lift up to 25 pounds May require periods of travel and/or relocation Must be willing to work non-traditional hours to meet project needs May be exposed to extreme conditions (hot or cold) Assignment location may include project sites and/or in the office Frequent activity: Sitting, Viewing Computer Screen Occasional activity: Standing, Walking, Bending, Climbing, Reaching above Shoulder, Pushing, Pulling. • Supports the preconstruction team including quantity takeoff, trade coordination and scope of work development, scope review, bid package development, schedule development, bid list creation and bid advertisement.
Traveling General Superintendent- Aviation J.E. Dunn Construction Group IncTraveling General Superintendent- AviationEl Paso, TXOur diverse teams around the country strive to enrich lives through inspired people and places everyday, and we need inspired people like you to join us in our pursuit of building perfection. By hiring inspired people, giving them interesting and challenging work, enabling them with innovative tools, and letting them share in the company's rewards, we've found a sustainable way to grow in our industry for the last 100+ years.
Traveling Project Director- Aviation J.E. Dunn Construction Group IncTraveling Project Director- AviationEl Paso, TXThis position is responsible for providing operational excellence, financial management, team leadership and relationship management with all stakeholders, driving the contracting and comprehensive risk management in order to meet or exceed all contractual and financial targets. Community & Industry Engagement: Assumes an influential leadership role in community and industry relationship building through networking, representing the organization on boards and serving as the face of the organization to help promote the interests of the company.
Aircraft Mechanic III (LUH A&P) CBA Fort Bliss, TX Amentum Services IncAircraft Mechanic III (LUH A&P) CBA Fort Bliss, TXTX$44.45–$49.22 / hourAircraft Mechanic III (LUH72) A&P Performs scheduled and unscheduled aircraft maintenance, to include repairs, modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise and guidance to solve complex problems by interpreting technical data such as; blue prints and manufactures manuals. Required to possess the level of experience necessary to inspect all required aeronautical type maintenance to be performed by skill class Mechanic I and must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions.
Aircraft Mechanic III (LUH A&P)(TDY Locations vary) CBA Fort Bliss, TX Amentum Services IncAircraft Mechanic III (LUH A&P)(TDY Locations vary) CBA Fort Bliss, TXTX$44.45–$49.22 / hourAircraft Mechanic III (LUH72) A&P Performs scheduled and unscheduled aircraft maintenance, to include repairs, modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise and guidance to solve complex problems by interpreting technical data such as; blue prints and manufactures manuals. Required to possess the level of experience necessary to inspect all required aeronautical type maintenance to be performed by skill class Mechanic I and must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions.
Aircraft Mechanic I (UH-60 Specialty) CBA Fort Bliss, TX Amentum Services IncAircraft Mechanic I (UH-60 Specialty) CBA Fort Bliss, TXFort Bliss, TXBasic knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Aircraft Maintenance Technician - A&P Mechanic Ameriflight LLCAircraft Maintenance Technician - A&P MechanicEl Paso, TXAmeriflight, LLC is the nation's largest Part 135 cargo airline and the leading provider of scalable, outsourced aviation services for the regional express airfreight market. You'll work in a fast-paced Part 135 operation where your expertise directly impacts safety, reliability, and operational success.
Maintenance Manager Ameriflight LLCMaintenance ManagerEl Paso, TXMay be required to stand; walk; use hands to finger, handle, or feel objects, required to sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Familiarity with business skills related to aircraft maintenance operations, i.e. budgeting, cost control, labor allocation, parts/inventory management.
Quality Assurance Inspector II, | different shifts available AST SpaceMobileQuality Assurance Inspector II, | different shifts availableEl Paso, TXThe Quality Inspector II – Composites Integration performs advanced in-process and final inspections of composite structures, bonded assemblies, mechanical integrations, and avionics-related hardware used in satellite production. This is a hands-on role for a highly skilled inspector who can independently evaluate aerospace-grade composite assemblies, identify nonconformances, and ensure hardware meets engineering, manufacturing, and quality requirements throughout the integration process.
Aircraft Fueler Menzies Aviation LtdAircraft FuelerEl Paso, TXYou will need to perform simple mathematical functions such as adding, subtracting, multiplying, and dividing with regards to weight, measurement and volume to interpret aircraft weight and balance loading instructions as they pertain to fueling. Perform fueling in a safe and efficient manner, drive and operate fuel trucks, hydrant cards, and stationary carts to fuel aircraft.
Mechanisms Technician Mon-Thurs 6pm-4:00am (El Paso, TX Midland, TX) AST SpaceMobileMechanisms Technician Mon-Thurs 6pm-4:00am (El Paso, TX Midland, TX)El Paso, TXThis role focuses on building precision mechanisms used within large phased-array satellite structures, including deployment assemblies, hinges, release mechanisms, actuators, and structural hardware. If you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home.
Mechanisms Technician (Dayshift Mon-Thurs 7:30am-5:30pm) (El Paso, TX Midland, TX) AST SpaceMobileMechanisms Technician (Dayshift Mon-Thurs 7:30am-5:30pm) (El Paso, TX Midland, TX)El Paso, TXThis role focuses on building precision mechanisms used within large phased-array satellite structures, including deployment assemblies, hinges, release mechanisms, actuators, and structural hardware. If you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home.
Mechanisms Technician Weekend Night shift, Fri–Sun 6pm–6am (El Paso, TX Midland, TX) AST SpaceMobileMechanisms Technician Weekend Night shift, Fri–Sun 6pm–6am (El Paso, TX Midland, TX)El Paso, TXThis role focuses on building precision mechanisms used within large phased-array satellite structures, including deployment assemblies, hinges, release mechanisms, actuators, and structural hardware. If you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home.
Mechanisms Technician Weekend shift, Fri–Sun 6am–6pm (El Paso, TX Midland, TX) AST SpaceMobileMechanisms Technician Weekend shift, Fri–Sun 6am–6pm (El Paso, TX Midland, TX)El Paso, TXThis role focuses on building precision mechanisms used within large phased-array satellite structures, including deployment assemblies, hinges, release mechanisms, actuators, and structural hardware. If you are open to relocating to Midland, this can be a career changing, and life changing, move into the high-tech aerospace world offering a new skill set and job security in a very similar environment that will soon feel like home.
2nd Shift Maintenance Technician. Mon-Thurs 6pm-4:00am (El Paso Midland) AST SpaceMobile2nd Shift Maintenance Technician. Mon-Thurs 6pm-4:00am (El Paso Midland)El Paso, TXThis role is responsible for performing preventative maintenance, diagnosing mechanical and electrical issues, repairing equipment, and supporting continuous improvement initiatives to maximize equipment uptime, reliability, and operational efficiency. AST SpaceMobile is seeking an Industrial Maintenance Technician to support the maintenance, repair, troubleshooting, and reliability of production equipment, facility systems, and manufacturing operations within our satellite production facility.
3rd & 4th Shift Maintenance Technician (El Paso Midland) AST SpaceMobile3rd & 4th Shift Maintenance Technician (El Paso Midland)El Paso, TXThis role is responsible for performing preventative maintenance, diagnosing mechanical and electrical issues, repairing equipment, and supporting continuous improvement initiatives to maximize equipment uptime, reliability, and operational efficiency. AST SpaceMobile is seeking an Industrial Maintenance Technician to support the maintenance, repair, troubleshooting, and reliability of production equipment, facility systems, and manufacturing operations within our satellite production facility.
Flight Nurse Air MethodsFlight NurseEl Paso, TexasFull timeYou’ll assess the nature and extent of illness or injury to establish and prioritize the care needed for the safe transport of the critical patient to the appropriate facility and are responsible for carrying out the mission and goals of Air Methods CBS, assuring that safety remains the highest priority throughout the transport continuum. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.
Aircraft Technician JetviaAircraft TechnicianEl Paso, TXParticipate, collaborate and facilitate weekly meetings to review maintenance projects progress, resolve issues related to phase inspection, service and repair to report to Director of Maintenance. Adhere to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company's, FAA Approved Continuous Airworthiness Maintenance Program.
4th Shift Structures Mechanic (Fri, Sat, Sun) 6pm - 6am AST SpaceMobile4th Shift Structures Mechanic (Fri, Sat, Sun) 6pm - 6amEl Paso, TXAST SpaceMobile is in search of a Structures Mechanic plays a critical role in the fabrication, assembly, and integration of spacecraft structural components used in our large-scale Low Earth Orbit (LEO) satellites. The ideal candidate is highly detail-oriented, comfortable working from engineering drawings, and experienced with precision assembly in aerospace, aviation, or similarly demanding manufacturing environments.
THAAD Field Engineer (OCONUS - Clearance) Akima, LLCTHAAD Field Engineer (OCONUS - Clearance)Fort Bliss, TexasThe candidate will aid the customer in the operation and maintenance of the THAAD Fire Control & Communication (TFCC) Systems and THAAD Launching Station in accordance with established Interactive Electronic Technical Manuals (IETMs), Technical Manuals (TMs), policies, procedures, and processes. Performs all maintenance actions and troubleshooting procedures that are above the level of the Enhanced Operator/Maintainers (EOM) to include but not limited to software, hardware, interconnecting cabling, electrical system, and networks.
Field Service Technician II (Cargo) Smiths Group PlcField Service Technician II (Cargo)El Paso, TX$75,240–$101,860 / yearMaintains field service log and filing system to properly initiate, organize and maintain all field service and job files until work is completed Demonstrates initiative and dedication through positive use of downtime and an overall willingness and eagerness to consistently exceed customer and company requirements. Establishes and maintains a close relationship with senior level FST's and Product Managers in order to support the needs of the customer and remain aware of current technical trends.
THAAD Field Engineer (OCONUS - Clearance) NANA Regional Corporation IncTHAAD Field Engineer (OCONUS - Clearance)TXThe candidate will aid the customer in the operation and maintenance of the THAAD Fire Control & Communication (TFCC) Systems and THAAD Launching Station in accordance with established Interactive Electronic Technical Manuals (IETMs), Technical Manuals (TMs), policies, procedures, and processes. Performs all maintenance actions and troubleshooting procedures that are above the level of the Enhanced Operator/Maintainers (EOM) to include but not limited to software, hardware, interconnecting cabling, electrical system, and networks.