CONTRACTOR

FEED

UNKNOWN

Excellent development and troubleshooting skills on embedded targets ¿ Excellent knowledge of OS coding techniques, interfaces, hardware subsystems and driver development ¿ Development experience with device drivers, board support package, boot code and knowledge of embedded system buses and protocols (e.g. GCC, LLVM), static analysis tools, dynamic analysis, and QEMU based development are preferred ¿ Knowledge and experience with software configuration management tools, defect tracking tools, and peer review processes.

HOUR

Embedded Software Engineer (Avionics) 
Contract 12+ months 40 hours weekly 9/80 Schedule 
Security Clearance is required ¿ Secret or above ¿ Candidates must be available to work from our Cambridge office, and travel to the Lowell office upon request. 
Hourly rate to $100 per hour based on Education and Experience 
Responsibilities 
Client is seeking a software engineer for development of embedded real-time avionics systems.  The engineer will develop high performance embedded solutions for resource constrained targets. These will include next-generation resilient and fault tolerant software solutions in the application domains of undersea, terrestrial, air, hypersonic systems and space. 
 The engineer will be involved in the full software development life cycle from the design and requirements stage all the way to testing and deployment in the field. 
Qualifications 
B.S. or M.S. in Computer Engineering, Computer Science, or equivalent with 5+ year of experience. ¿ Candidate must have experience in embedded software development with o RISC-V and Ultrascale+ (Arm) processors or other low power microcontrollers (e.g. PowerPC, TMS320), o Real-time operating systems (RTOSs), such as VxWorks, Integrity, embedded Linux, Zephyr and FreeRTOS, o C/C++ and assembly programming languages  
 Excellent development and troubleshooting skills on embedded targets ¿ Excellent knowledge of OS coding techniques, interfaces, hardware subsystems and driver development ¿ Development experience with device drivers, board support package, boot code and knowledge of embedded system buses and protocols (e.g. CAN, I2C, SPI, Serial, SpaceWire, 1553) ¿ Expertise in development tools (e.g. GCC, LLVM), static analysis tools, dynamic analysis, and QEMU based development are preferred ¿ Knowledge and experience with software configuration management tools, defect tracking tools, and peer review processes. 
 Experience with in-circuit emulators, JTAG debuggers, and laboratory test equipment. ¿ Experience with developing formal requirements, design and test documentation and supporting formal reviews

We are a national technical recruiting firm.   At GCR, you'll discover a team of experienced and technically knowledgeable recruiters all working for you. We specialize in contract, contract to hire, and permanent staffing solutions across a variety of industries including, Information Technology, Commercial, Automotive, Medical Device, Pharmaceutical, and Manufacturing. We have well established relationships with companies from startup to large enterprise organizations.

GCR Professional Services

Embedded Software Engineer (Avionics)

Assembly Language

Avionics

Boundary Scan

Bug Tracking/Defect Management

Buses

C Programming Language

C++ Programming Language

Computer Engineering

Computer Science

Debugging Tools

Device Drivers

Dynamic Analysis

Embedded Linux

Embedded Software

Embedded Systems

GNU C Compiler

Identify Issues

In-Circuit Emulator

Laboratory Equipment

Laboratory Testing

Low Power

Microcontroller

Operating Systems

PowerPC Processor

Programming Tools

RISC Processors

Realtime Operating System

Security Clearance

Software Configuration Management

Software Development

Software Development Lifecycle (SDLC)

Software Engineering

Static Analysis

Support Documentation

Test Design

Test Equipment

Testing

VxWorks

Willing to Travel

With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. Calibration Technicians at this level typically can calibrate, troubleshoot, and adjust higher-level equipment across a minimum of six (6) disciplines, with expert knowledge in two (2) disciplines (e.g., Electrical, Dimensional or Pressure).

Overview:
Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond.  With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities.  We fulfill this promise through our employees, who live Our Values every day, the Transcat Way.  Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve.  Are you ready to join a company where the work you do makes a difference, and where you can grow in your career?   Here’s what Transcat has to offer—<ul><li>Work that matters.</li><li>A values-based culture where people care about each other and the work they do together.</li><li>Flexibility</li><li>Training and development to accelerate learning and career advancement.</li><li>Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE!</li><li>Pay Range: $28.00 - $36.00/hr</li></ul>Calibration Technician III is a mid to upper-level technician position with a minimum of four (4) years commercial calibration experience preferred. Calibration Technicians at this level typically can calibrate, troubleshoot, and adjust higher-level equipment across a minimum of six (6) disciplines, with expert knowledge in two (2) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat’s technician skills progression matrix. A Calibration Technician III will be capable of completing work independently within the lab or onsite at a customer location, with limited or no guidance. Completion of a professional CCT or CMT certification is desired for this role.

Responsibilities:
Essential Duties and Responsibilities<ul><li>Perform calibration work with little to no supervision</li><li>Conduct independent research when necessary</li><li>Coordinate and manage daily workloads without direction from manager</li><li>Identify and utilize appropriate measurement techniques</li><li>Maintain calibration standards</li><li>Understand and apply uncertainties to measurements made</li><li>Read and interpret labs’ scopes of accreditation</li><li>Work effectively with lab support staff</li><li>Working knowledge and competency in six (6) disciplines and expert in two (2) disciplines preferred</li><li>Perform calibrations within a laboratory or customer onsite setting </li><li>Work at customer on-sites with little to no direction</li><li>Fulfill duties safely under working conditions, in keeping with Company requirements and standards</li><li>Other duties as assigned</li><li>Travel requirement: up to 50% of work schedule </li></ul> Primary Objectives<ul><li>Learn and develop fundamental calibration skills and techniques, which includes high level production with few errors </li><li>Develop team lead skills and responsibilities </li><li>Develop skills necessary to train and advise lower-level technicians</li><li>Develop skills necessary to advance to Senior Calibration Technician position, which includes a working knowledge and competency in at least eight (8) disciplines and expert competency in three (3) disciplines.</li><li>Deliver on Transcat’s Quality Policy (QAC-F01-001)</li></ul>

Qualifications:
Required Knowledge, Skills, Abilities, and Qualifications<ul><li>Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction</li><li>Strong interpersonal and customer service skills </li><li>Excellent attention to detail</li><li>Self-motivated learner with the ability to learn new skills related to calibration and calibration processes</li><li>Ability to take direction and learn from feedback</li><li>Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team</li><li>3+ years driving experience with a valid driver’s license</li></ul> Education and ExperienceRequired: <ul><li>Associates degree from college or technical school, or four+ (4+) years related experience and/or training, or equivalent combination of education and experience</li><li>Experience working within ISO 17025 and the ability to create, edit and maintain uncertainty budgets with an extensive understanding of statistics </li></ul>Preferred:  <ul><li>Four+ (4+) years of commercial calibration experience</li><li>CCT or CMT certification</li><li>Previous experience or training in electronics or machining</li><li>Extensive statistical background</li><li>Familiarity with basic hand tools</li><li>Proficiency with Microsoft Office computer software including Word, Excel, and Outlook Advanced organizational and time management skills</li><li>Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics </li></ul>Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment:The work environment described here is representative of what an employee encounters while performing the essential functions of this job.  While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report. Ind1

Transcat, Inc.

Calibration Technician III

Aerospace and Defense

American Society for Quality (ASQ)

Biology

Budgeting

Calibration

Communication Skills

Computer Skills

Computer Software

Customer Support/Service

Detail Oriented

Disability Accommodations

Driver's License

Electricity

Electronics

Energy & Utilities

Finance

Hand Tools

ISO (International Organization for Standardization)

Interpersonal Skills

Machining

Metrology

Microsoft Excel

Microsoft Office

Microsoft Outlook

Microsoft Word

Online Training

Physical Demands

Problem Solving Skills

Research Skills

Risk

Safety/Work Safety

Sales

Statistics

Team Lead/Manager

Technical Consulting

Time Management

Training/Teaching

[AW]-iCims

This role offers nationwide travel, strong overtime potential, and hands‑on work supporting essential infrastructure across major industrial sites. Join a growing industrial services team where your electrical and mechanical skills keep critical systems running safely and efficiently.

YEAR

Overview:
<h2>Field Service Technician – $80–95K + OT | Heavy Travel | Immediate Hire</h2>Join a growing industrial services team where your electrical and mechanical skills keep critical systems running safely and efficiently. This role offers nationwide travel, strong overtime potential, and hands‑on work supporting essential infrastructure across major industrial sites.<h3> What You’ll Do</h3><ul><li>Install and service heat trace systems that protect pipelines and equipment.</li><li>Perform electrical installations, including control panels, wiring, and system connectivity.</li><li>Support full project installations, including scaffolding, coatings, and multi‑phase field work.</li><li>Complete routine and emergency repairs on industrial systems.</li><li>Execute scheduled preventive maintenance to reduce downtime and extend equipment life.</li><li>Work directly with customers to ensure systems meet safety and performance standards.</li><li>Travel extensively to industrial sites, including overnight travel.</li></ul><h3> Why This Role Stands Out</h3><ul><li>Competitive pay: $80–95K base + overtime</li><li>Variety of work across multiple industries and sites</li><li>Independence and field autonomy</li><li>Clear growth into Lead Tech, Project Supervisor, or Specialist roles</li><li>All travel expenses covered</li></ul><h3>藺 What You Bring</h3><ul><li>Experience with electrical systems (industrial or military strongly preferred)</li><li>Ability to install, troubleshoot, and repair control panels and wiring</li><li>Strong organizational skills and comfort working in fast‑paced environments</li><li>Commitment to safety and high‑quality workmanship</li><li>Ability to travel extensively, including overnights</li></ul>Veterans with electrical, avionics, or mechanical backgrounds are strongly encouraged to apply.

Veterans Prime, Inc.

Field Service Technician

Electrical Wiring

Maintenance - Electrical

On Site Support

Preventative Maintenance

Project/Program Management

Safety Standards

Scaffolding

Technical Leadership

FULL_TIME

OTHER

Join our team as a Test Equipment Technician supporting the design, integration, maintenance, and troubleshooting of advanced electronic and electro-mechanical aerospace test systems. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion.

Join our team as a Test Equipment Technician supporting the design, integration, maintenance, and troubleshooting of advanced electronic and electro-mechanical aerospace test systems. This position is part of the Sensors and Fluid Management Systems Business Unit within AMETEK Aerospace & Defense's Measurement and Power Systems Division.This position reports directly to the Sr Test Equipment EngineerKey Responsibilites <ul><li>Support calibration and maintenance of test equipment systems</li><li>Collaborate with manufacturing and design engineers to develop or improve new or existing testing procedures</li><li>Apply knowledge of aerospace manufacturing and testing standards including AS9100/ISO9001</li><li>Create detailed technical documentation, including instruction manuals, schematics and other detailed diagrams</li><li>Research and make recommendations for new materials, parts and equipment</li><li>Support continuous improvement initiatives</li><li>Provide technical recommendations for upgrading and maintaining test infrastructure</li><li>Demonstrate a willingness to participate in career growth initiatives</li></ul>Requirements for Consideration <ul><li>Minimum of an Associates degree in a STEM discipline</li><li>5+ years in a technical manufacturing or engineering environment with bench testing and troubleshooting expertise</li><li>Proficiency in test methods, data acquisition, and control software</li><li>Familiarity with industry-standard data acquisition and comm bus devices, DMM, Oscilloscopes, power supplies and other test equipment</li><li>Ability to create wiring diagrams and electro-mechanical schematics for reverse engineering analysis</li><li>Knowledge of electrical components, circuitry, and basic software development</li><li>Experience with aerospace or avionics manufacturing preferred</li><li>Strong analytical and problem-solving skills</li><li>Excellent organizational, written, and verbal communication skills</li><li>Proficiency utilizing Microsoft Office</li><li>Knowledge of AI tools for research and problem-solving is desirable</li><li>Ability to research, recommend and source materials, parts and equipment</li><li>Ability to interpret technical data sheets and specifications</li><li>Strong mechanical aptitude and soldering skills desired</li><li>Ability to lift up to 50lbs and work in confined areas</li><li>Ability to work independently and within a team environment</li><li>Adaptability to shifting priorities and tight deadlines</li><li>Exposure to continuous improvement, and related best practices is a plus</li><li>Team player with strong interpersonal skills and commitment to collaboration and initiative</li><li>Self-directed, detail-oriented, and able to work under pressure</li><li>Due to contracts with the United States Government, candidates must be either a US Citizen or US Permanent Resident</li></ul>CompensationEmployee Type: Exception Hourly Salary Minimum: $60,000 Salary Maximum: $80,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location.For more information on AMETEK's competitive benefits, please click here.AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion.AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit https://www.ametek.com/careers for more information.We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359.Nearest Major Market: Boston

<img alt=" " height="1" src="https://ars2.equest.com/?response_id=13cdc2963ed5306b970165f4ca518593&view" width="1"/>

AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion.
AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers’ most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit <a title="www.ametek.com" href="https://urldefense.com/v3/__https:/jobs.ametek.com/job/Peabody-Mechanical-Assembler-2nd-Shift-MA-01960/1227162200/www.ametek.com__;!!D1XWH5In!Qe6CY6Xjeo7hJeMe15YOtCEgPEXWMI-tgryDnyf9xk9G-u30G60-2eSWkgNSopi-5Aw934gT_JIuhwSVKLBpr9dv3kA$" target="_blank" rel="noopener">www.ametek.com</a> for more information.

Avionics Jobs in Cambridge, MA

Resume Resources

Get noticed by top employers!

Avionics Jobs in Cambridge, MA

Embedded Software Engineer (Avionics) GCR Professional Services

Calibration Technician III Transcat, Inc.

Field Service Technician Veterans Prime, Inc.

Test Equipment Technician AMETEK, Inc

Resume Resources