Manufacturing Engineer: 1st shift; Monday-Friday 7am-3:30pm SKILLS INCManufacturing Engineer: 1st shift; Monday-Friday 7am-3:30pmAuburn, WA$27–$42 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Solution orientated, able to define problems, collect data, establish facts and draw valid conclusions to solve a wide range of difficult problems in practice and cost effective ways.
Assembler I – 1st & 2nd Shift | Aerospace Kelly ServicesAssembler I – 1st & 2nd Shift | AerospaceSumner, WA$21.75–$25.75 / hourKelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. + Assemble aerospace components using hand and power tools, including rivet guns and pneumatic/air tools such as impact wrenches, ratchets, sanders, grinders, drills, and air hammers.
1st Shift Medical Device Assembler iMPact Business Group1st Shift Medical Device AssemblerRedmond, WAAssembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairing units or products that have failed to meet requirements.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift ELDEC AerospaceRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, Washington$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Shipping 1st Shift M-F 7am to 3:30pm The HEICO Companies, LLCShipping 1st Shift M-F 7am to 3:30pmKent, WashingtonThe Shipping and Receiving Material Handler is responsible for ensuring that finished products are shipped to the Company's customers in a timely and cost-effective manner and unloads raw materials such as wooden pallets, zinc and lead and so forth. As the largest wire manufacturer in the Western United States, our impressive range of products are used in a wide variety of fields, including agriculture, construction, transportation, communications, and industrial applications.
ASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) Royell ManufacturingASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT)Everett, WA$22–$28 / hourLocation 3817 SMITH AVE, Everett, WA, 98201-4547, United States. Phone 425-259-9258 Ext 211.
Production Machinist Starlink - 1st Shift Space Exploration Technologies CorpProduction Machinist Starlink - 1st ShiftWoodinville, WA$23–$29 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron level tolerance machined parts at production volumes.
Production Machinist Starlink - 1st Shift - Level 4/5 Space Exploration Technologies CorpProduction Machinist Starlink - 1st Shift - Level 4/5Woodinville, WA$38–$45 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As a CNC Production Machinist on the Ultra Precision Machining team, you will be responsible for manufacturing, developing, and continuously improving key technologies consisting of micron-level tolerance machined parts at production volumes.
Integration & Test Specialist Starlink Propulsion - 1st Shift Space Exploration Technologies CorpIntegration & Test Specialist Starlink Propulsion - 1st ShiftRedmond, WA$34–$40 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable.
CNC MACHINIST (1st SHIFT) ROYELL MANUFACTURING INC.CNC MACHINIST (1st SHIFT)Everett, WAFull timeWorking independently while setting up and running new and proven jobs, they are technical leaders who instruct others while giving technical direction and solving technical problems. You must instruct others to improve productivity and run machine qualification checks, read G-Code, qualify fixtures, and test new cutters with the assistance of the ME department.
CNC ENTRY LEVEL MACHINIST (1st Shift) ROYELL MANUFACTURING INC.CNC ENTRY LEVEL MACHINIST (1st Shift)Everett, WAFull timeThe company is committed to delivering exceptional value to our customers through sustainable solutions focusing on quality, productivity and affordability. CNC Entry Level Machinists start out learning to operate machines while on the job.
ASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT) ROYELL MANUFACTURING INC.ASSEMBLY SPECIALIST- AEROSPACE (1st SHIFT)Everett, WAFull timeThis position completes a range of assemblies from uncomplicated assemblies in high volume to more complex assemblies as they develop skills with technical assistance. The company is committed to delivering exceptional value to our customers through sustainable solutions focusing on quality, productivity and affordability.
Aerospace Production - Laminator I - 1st Shift Sekisui Chemical LtdAerospace Production - Laminator I - 1st ShiftRenton, WA$22.25–$26.65 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Assembler I, 1st Shift Sekisui Chemical LtdAssembler I, 1st ShiftSumner, WA$22.25–$26.25 / hourPay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. The Assembler works according to takt time on a moving line or bench, performing finish assembly processes to mass-produce commercial aircraft composite products.
Avionics Electronics Technician - 1st Shift (Onsite) RTX CorpAvionics Electronics Technician - 1st Shift (Onsite)Federal Way, WARegardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. Aligns and adjusts advanced electronic components on units being repaired to ensure proper functioning of electronic circuits, utilizing established calibration procedures.
NewPMO - Packaging Machine Operator - 1st Shift Utz Quality Foods LLCPMO - Packaging Machine Operator - 1st ShiftAlgona, WAUtz Quality Foods is looking to grow our loyal, career driven, and customer focused team and is currently recruiting for a Packaging Machine Operator (PMO) to work from our UTZ manufacturing facility located in Algona, WA on 1st Shift. The Packaging Machine Operator is responsible for the efficient operation of the packaging machines ensuring proper weight, spicing, sealing and code date of finished product.
Production Operator Packaging -1st Shift Champion Petfoods EuropeProduction Operator Packaging -1st ShiftAuburn, WashingtonThe base pay range for this position at commencement of employment is expected to be between the range listed above, however, base pay offered may vary depending on multiple individualized factors, including but not limited to, market location, job-related knowledge, skills, and experience. Overview: The Packaging Production Operator has primary responsibility to operate the equipment safely and efficiently within the Packaging department at the state-of-the-art pet food production facility located in Auburn, Kentucky.
Account Manager - 1st Shift GXO Logistics IncAccount Manager - 1st ShiftEverett, WA$67,337–$101,006 / yearAt GXO, we know our greatest asset is people like you - energetic, innovative people of all experience levels and talents who make GXO a great place to work. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.
Integration Technician Starlink - 1st Shift Space Exploration Technologies CorpIntegration Technician Starlink - 1st ShiftRedmond, WA$23–$29 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.