Inventory Clerk – Manufacturing AtWork Personnel - Saint PaulInventory Clerk – ManufacturingStacy, MN$18–$20 / hourWe currently have multiple openings with opportunities to focus on either shipping/receiving and warehouse inventory or inventory and material kitting for electronics/SMT production . This is a great opportunity for someone with experience in inventory, shipping and receiving, warehouse operations, material handling, kitting, or manufacturing.
Manufacturing Associate I - Day Shift Takeda Pharmaceutical Co LtdManufacturing Associate I - Day ShiftBrooklyn Park, MN$19.81–$31.10 / hourThe actual hourly wage offered may depend on a variety of factors, including the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. Carry weight, Pushing, Pulling Lifting - Required to carry, lift, push, and pull up to 50 pounds several times a day for 15-minute durations while handling production equipment and materials.
Manufacturing Technology Leader Amrize LtdManufacturing Technology LeaderMNRemoteABOUT THE ROLE: The Isocyanurate Technology Leader will develop and improve the polyisocyanurate insulation board manufacturing process in the ISO facilities within Amrize. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit test.
Manufacturing Equipment Engineer II NexternManufacturing Equipment Engineer IIMaple Grove, MN$95,000–$110,000 / yearDirect experience with laser micrometer / non-contact dimensional gauging systems (e.g., Mitutoyo, Keyence, LaserLinc, or similar) laser welders, HIPOT/ electrical safety equipment, Oscilloscopes, Hotbox and reflow towers and other calibration required manufacturing equipment, Experience building or formalizing a preventive maintenance program from an informal/ad hoc state preferred. We are seeking an Manufacturing Equipment Engineer II to own the equipment and inspection-equipment lifecycle for our manufacturing lines — equipment specifications and drawings, preventive maintenance, fixture and tooling ownership, and the selection and qualification of new equipment, including precision dimensional metrology such as laser micrometers.
Manufacturing Engineer II (2nd Shift) NexternManufacturing Engineer II (2nd Shift)Maple Grove, MN$88,000–$100,000 / yearThe Manufacturing Quality Engineer ensures that manufacturing programs meet applicable quality, regulatory, and customer requirements by providing quality oversight, driving compliant execution, and supporting continuous improvement across the product lifecycle. Manufacturing Quality Engineers also support development activities as programs prepare to launch into commercial manufacturing, including manufacturing readiness, audits, and clinical builds.
Manufacturing Engineer - Medical Device NexternManufacturing Engineer - Medical DeviceMaple Grove, MN$135,000–$165,000 / yearProblem Solving & Continuous Improvement: Lead root cause analysis investigations, implement corrective and preventive actions (CAPA), and drive continuous improvement initiatives to enhance product quality, reduce waste, and improve manufacturing efficiency. • Technical Skills: Proficiency in CAD software (SolidWorks, AutoCAD, or similar); knowledge of statistical process control (SPC) and lean manufacturing; understanding of medical device validation processes (Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ)).
Sr. Manufacturing Engineer Intellectt INCSr. Manufacturing EngineerMinnetonka, MNThe ideal candidate will have hands-on experience developing and optimizing manufacturing processes while ensuring compliance with quality and regulatory requirements. We are seeking a Manufacturing Engineer with strong experience in medical device manufacturing, process development, validation, and continuous improvement.
Manufacturing Assembler I (USA) eTeam Inc.Manufacturing Assembler I (USA)Chanhassen, MN$1–$22 / hourProven mechanical aptitude and/or knowledge of various electrical and mechanical assembly techniques, including knowledge of soldering techniques, plumbing/piping systems, and various pneumatic and electro-mechanical components. Works with manufacturing engineering and document control to maintain work instructions and other manufacturing documentation such as as-build documents, marking up and redlining drawings, etc.
NewManufacturing Engineer Apollo Professional Solutions IncManufacturing EngineerBurnsville, MNOur client is seeking a manufacturing engineer who can creatively apply engineering knowledge to efficiently solve complex manufacturing problems to support the production of sensors in the Engines and Space product portfolio. Our ideal candidate will be an enthusiastic learner with a bias for action that works well with other engineers and values collaboration while also being able to work independently with minimal input required from other engineers.
NewManufacturing Engineer- Aerospace SussekManufacturing Engineer- AerospaceBloomington, MNResponsibilities: Lead changes as an example to shop floor personnel to improve the operation, effectiveness, quality improvement and profitability on the shop floor. Further responsibilities include documentation, continuous improvement, method improvement, contract review, and storage of programs, tool lists, and processes.
Sr. Manufacturing Engineer Cirtec Medical Corp.Sr. Manufacturing EngineerBrooklyn Park, MN$100,000–$128,000 / yearFull timeKey Responsibilities: Implement, plan, and execute continuous improvement projects for cost reduction, quality improvements and efficiency from conception to fully established production. Manufacturing Engineers document processes and could implement creative ideas or solutions to improve assembly operations which may include development of tooling/fixturing as needed to accomplish this task.
Manufacturing Engineering Co-Op Entegris IncManufacturing Engineering Co-OpBloomington, MN$20–$30 / hourWhat You'll Do: Own and execute a significant manufacturing engineering project focused on your area of study while delivering measurable results by the end of the co-op term that can be presented to site leadership. Values-driven culture with colleagues that rally around People, Accountability, Creativity and Excellence Entegris does not provide immigration-related sponsorship for this role.
Manufacturing Engineer Banner EngineeringManufacturing EngineerMinneapolis, MN$82,245–$116,000 / yearFrom Fortune 500 leaders to innovative startups, Banner's award-winning products and solutions are helping companies around the world increase efficiency, reduce costs, safeguard equipment, and protect personnel. Evaluate opportunities to improve various manufacturing processes by using knowledge of product fabrication, assembly, design, materials, tooling, and feedback from equipment vendors and operators.
Manufacturing Engineer Egan CompanyManufacturing EngineerChamplin, MN$85,000–$110,000 / yearFrom general contractors and architects to building owners and facility engineers, Egan collaborates throughout the entire construction or project process with the shared goal of maintaining best-in-class relationships with our internal teams, customers, and business partners. To ensure a strong start, we ask for a minimum of 90 days in the office at the start to wrap your arms around the role, build essential in-person connections, and gain the organizational knowledge needed for success before transitioning to our hybrid schedule.
Manufacturing Engineer - PLY Building Banner EngineeringManufacturing Engineer - PLY BuildingMinneapolis, MN$82,245–$116,000 / yearFrom Fortune 500 leaders to innovative startups, Banner's award-winning products and solutions are helping companies around the world increase efficiency, reduce costs, safeguard equipment, and protect personnel. Evaluate opportunities to improve various manufacturing processes by using knowledge of product fabrication, assembly, design, materials, tooling, and feedback from equipment vendors and operators.
Manufacturing Electronics Technician (1St Shift) Banner EngineeringManufacturing Electronics Technician (1St Shift)Minneapolis, MN$21.65–$29.76 / hourFrom Fortune 500 leaders to innovative startups, Banner's award-winning products and solutions are helping companies around the world increase efficiency, reduce costs, safeguard equipment, and protect personnel. This role serves as the primary technical support during 1st shift operations, quickly diagnosing issues and implementing corrective actions to keep manufacturing lines running safely and efficiently.
Manufacturing Leadership Program Engineer - Class of 2027 General Dynamics CorpManufacturing Leadership Program Engineer - Class of 2027Bloomington, MN$77,843–$86,358 / yearParticipants gain hands-on experience across manufacturing engineering, production operations, quality engineering, and related technical functions while developing leadership and business acumen. General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation.
Controls Engineer (Process Controls & Manufacturing) Egan CompanyControls Engineer (Process Controls & Manufacturing)Champlin, MN$100,000–$120,000 / yearFrom general contractors and architects to building owners and facility engineers, Egan collaborates throughout the entire construction or project process with the shared goal of maintaining best-in-class relationships with our internal teams, customers, and business partners. To ensure a strong start, we ask for a minimum of 90 days in the office at the start to wrap your arms around the role, build essential in-person connections, and gain the organizational knowledge needed for success before transitioning to our hybrid schedule.
Manufacturing Technician III Talent Software Services, Inc.Manufacturing Technician IIIArden Hills, MN$30–$32 / hourResponsible for performing functions associated with all manufacturing operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the production of parts, components, subassemblies, and final assemblies. Installs and validates equipment and processes in the production area to improve yield and/or reduce cycle time following the established validation procedure.
Design Services & Technical Oversight Lead - Pharmaceutical Manufacturing AtkinsRealisDesign Services & Technical Oversight Lead - Pharmaceutical ManufacturingHudson, WI$170,000–$200,000 / yearThe successful candidate will partner with client stakeholders, EPC firms, design consultants, construction teams, commissioning personnel, and operations leaders to validate technical solutions, challenge assumptions, identify risks, and improve overall project outcomes. Note to staffing and direct hire agencies: In the event a recruiter or agency who is not on our preferred supplier list submits a resume/candidate to anyone in the company, AtkinsRéalis family of companies, we explicitly reserve the right to recruit and hire the candidate(s) at our discretion and without any financial obligation to the recruiter or agency.