Post-Doctoral Research Associate: Department of Electrical Engineering and Computer Science - UTK University of Tennessee SystemPost-Doctoral Research Associate: Department of Electrical Engineering and Computer Science - UTKKnoxville, TNThe University of Tennessee, Knoxville (UTK) is an R1 research university located in Knoxville, Tennessee, with strong collaborative ties to Oak Ridge National Laboratory (ORNL) - one of the largest U.S. Department of Energy national laboratories - offering unique opportunities for joint research in AI security, cyber-physical systems, and high-performance computing. The position offers significant autonomy in shaping research directions, opportunities to co-author publications at top venues (CCS, NDSS, USENIX Security, IEEE S&P), mentor graduate/undergraduate students, and participate in proposal development for federal funding agencies (NSF, DARPA, ARO, DoE).
Visiting Lecturer of Computer Science Maryville CollegeVisiting Lecturer of Computer ScienceMaryville, TNThe Division of Mathematics and Computer Science at Maryville College, a selective four-year liberal arts college committed to superior teaching, invites applications for a one-year, full-time Visiting Lecturer of Computer Science position beginning in August 2026. "Maryville College prepares students for lives of citizenship and leadership as we challenge each one to search for truth, grow in wisdom, work for justice and dedicate a life of creativity and service to the peoples of the world.".
NewComputer Science Intern Launch TNComputer Science InternKnoxville, TNA basic understanding of control systems and systems engineering for electrical devices [relevant co-op, internship, or thesis experience is desirable]Desirable QualificationsExperience in code development for managing Arduino, other microcontrollers and higher level circuit systemsKnowledge of sensors and process control to manage electrical and electronics systemsFuel cell, electrolysis or other electrochemical system design and test experienceYour contributions to design and code will contribute to solving the most important problems the world faces today: Climate Change. It will involve using the latest and most complex technical updates in the areas of bioelectrochemical process control, distributed energy production systems, data management, automation, and optimization.#J-18808-Ljbffr.
Computer Science and Information Technology - Adjunct Instructor/Faculty SOUTH COLLEGE OF TENNESSEEComputer Science and Information Technology - Adjunct Instructor/FacultyKnoxville, TNCandidates must evidence the following: • A minimum of an acceptable master's degree in the specific subject matter field (doctorate preferred) for undergraduate courses • An earned doctoral degree and satisfactory completion of 18 graduate semester hours in subject matter field for graduate courses • Experience teaching similar courses at a higher education institute • Preference will be given for candidates with experience teaching online. In order to fully meet our Mission to our students, we require a diverse combination of perspectives, backgrounds, life experiences, and ideas from our faculty and staff and will provide them with an equitable and inclusive work environment -where respect and open interchange of ideas are at the heart of that culture.
NewComputer Scientist Oak Ridge National LaboratoryComputer ScientistOak Ridge, TNOverview: We are seeking a Computer Scientist or Engineer with a focus on Vulnerability Research who will support the Cyber Resilience and Intelligence Division in the National Security Science Directorate at Oak Ridge National Laboratory (ORNL). About ORNL: As a U.S. Department of Energy (DOE) Office of Science national laboratory, ORNL has an impressive 80-year legacy of addressing the nation's most pressing challenges.
Director of Information Technology: Tickle College of Engineering - UTK University of Tennessee SystemDirector of Information Technology: Tickle College of Engineering - UTKKnoxville, TN$135,000–$150,000 / yearServes as a TCE representative and expert resource on campus-level IT infrastructure initiatives, evaluates emerging technologies for potential college and campus deployment, and advises IT personnel on policies and best practices related to information security, networking, AV technology, system configuration, and system monitoring. Resolves complex IT issues, manages competing priorities, leads cross-functional IT groups, and provides oversight for IT programs, initiatives, projects, documentation, equipment life-cycle management, software renewals, and installed systems databases.
NewSenior Manager Software Engineering First Horizon CorpSenior Manager Software EngineeringMaryville, TNHeadquartered in Memphis, TN, the banking subsidiary First Horizon Bank operates in 12 states across the southern U.S. The Company and its subsidiaries offer commercial, private banking, consumer, small business, wealth and trust management, retail brokerage, capital markets, fixed income, and mortgage banking services. In addition to being able to build a strong team, the Senior Manager must skillfully manage multiple suppliers providing a range of services to ensure proper value delivery to First Horizon, while also maintaining adequate long term control and efficiency.
NewProject Manager-Mechanical Engineering Professional Project Services IncProject Manager-Mechanical EngineeringKnoxville, TNAdditionally, assists the Mechanical department in day-to-day project coordination with: - developing process flow diagrams, and sequences of operations; selection and layout of mechanical equipment and associated piping systems; and developing mechanical construction and equipment specifications, test and inspection plans, and system design descriptions. heating and chilled water hydronic piping systems, natural gas piping systems, domestic water and wastewater piping systems, steam and condensate piping systems, compressed air systems, and mechanical system controls, etc.
Engineering Physicist- Diagnostics Type One Energy GroupEngineering Physicist- DiagnosticsKnoxville, TennesseeB.S. in Engineering Physics, Mechanical Engineering, Nuclear Engineering, Physics, Electrical Engineering, or a related field; Familiarity in designing, developing, and/or operating advanced diagnostic systems for fusion or plasma physics experiments; Experience in data acquisition, analysis, and interpretation using scientific software and programming languages (e.g., Python, MATLAB); Familiarity with Computer Aided Design and Analysis software; Excellent problem-solving skills with the ability to troubleshoot and resolve technical issues related to diagnostic systems; Strong communication and interpersonal skills to collaborate effectively with multidisciplinary teams, present findings to diverse audiences, and contribute to scientific publications and proposals; Familiarity with safety protocols and procedures related to fusion experiments and diagnostics; and. Our FusionDirect development program pursues the lowest-risk, shortest-schedule path to a fusion power plant over the coming decade, using a partner-intensive and capital-efficient strategy.
Design Engineering Manager Kelvion Holding GmbHDesign Engineering ManagerKnoxville, TNDrive design excellence through implementation of Design Failure Mode and Effects Analysis (DFMEA) and Design for Manufacturing & Assembly (DFMA) principles. Collaborate with Operations, Manufacturing, and Supply Chain to ensure designs are manufacturable, cost-effective, and aligned with plant capabilities.
NewDirector of Design and Engineering WALTON SIGNAGE, LTDDirector of Design and EngineeringKnoxville, TNRemoteWe are currently recruiting for a DIRECTOR OF DESIGN AND ENGINEERING for interpreting business needs and client briefs and turning them into compelling creative solutions with oversight over creative teams including art directors, content strategists, graphic artists, designers, and engineers. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.
NewProject Manager-Electrical Engineering Professional Project Services IncProject Manager-Electrical EngineeringKnoxville, TNProfessional Project Services, Inc. (Pro2Serve) is a nationally-recognized technical and engineering services firm dedicated to providing critical infrastructure engineering services in support of our Nation's security. We support the defense, energy, and science markets through responsive, cost-effective execution of critical security, facilities and infrastructure, nuclear defense and nonproliferation, and environmental projects.
Electrical Engineering Associate Barge Design Solutions IncElectrical Engineering AssociateKnoxville, TNThis role supports the design and development of electrical systems for a diverse portfolio of industrial, commercial, and healthcare projects, contributing to solutions that power critical infrastructure and enhance the built environment. Perform electrical calculations for voltage drop and cable sizing, electrical service sizing, panelboard, and electrical equipment designs.
Engineering Dept Administrative Assistant Full Time Days East Tennessee Children's Hospital AssociationEngineering Dept Administrative Assistant Full Time DaysKnoxville, TennesseeDemonstrates respect and regard for the dignity of all patients, families, visitors, and fellow employees to ensure a professional, responsible, and courteous environment, and interacts with all patients, staff, volunteers, etc. in a considerate, helpful, and courteous manner, as observed by management observation and peer input. Supports the Computerized Maintenance Management System by building the scheduling of PMs, originating work orders, completing the loop on work orders/PMs/projects and monitors and runs reports for aging work orders.
Engineering Dept Administrative Assistant Full Time Days East Tennessee Childrens HospitalEngineering Dept Administrative Assistant Full Time DaysKnoxville, TNDemonstrates respect and regard for the dignity of all patients, families, visitors, and fellow employees to ensure a professional, responsible, and courteous environment, and interacts with all patients, staff, volunteers, etc. in a considerate, helpful, and courteous manner, as observed by management observation and peer input. REPORTS TO Engineering Manager JOB REQUIREMENTS Supervisory Responsibilities: No Minimum Education: High School Diploma/GED Degree: General License/Certification Required: None Minimum Work Experience: 2 years of administrative office duties, clerical or related experience preferred.
Technical Assistant: Tennessee Ion Beam Laboratory, Department of Nuclear Engineering - UTK University of Tennessee SystemTechnical Assistant: Tennessee Ion Beam Laboratory, Department of Nuclear Engineering - UTKKnoxville, TNThe university holds the highest Carnegie classification for research activity and has deep partnerships with industry leaders and the US Department of Energy's largest multidisciplinary laboratory, Oak Ridge National Laboratory. The position provides support to The Tennessee Ion Beam Laboratory (TIBML) by troubleshooting and repairing equipment and assisting faculty and students with research equipment and experiments as well as new lab set up.
Adjunct Instructor – Audio Production Engineering TNBR CareersAdjunct Instructor – Audio Production EngineeringKnoxville, TennesseeRequired Qualifications: Associate’s degree or higher from a regionally accredited college/university in the teaching field or closely related field, and three years’ work experience in the Audio Production Engineering field. Please note: to scan, upload, or attach documents, a computer and scanner are available at the Hardin Valley Campus Educational Resources Center, if needed.
Adjunct Instructor – Mechanical Engineering Technology TNBR CareersAdjunct Instructor – Mechanical Engineering TechnologyKnoxville, TennesseeRequired Qualifications: Bachelor’s degree or higher from a regionally accredited college/university in the teaching field or closely related field and three years’ work experience in the Mechanical Engineering Technology field. Please note: to scan, upload, or attach documents, a computer and scanner are available at the Hardin Valley Campus Educational Resources Center, if needed.
Adjunct Instructor – Civil Engineering Technology TNBR CareersAdjunct Instructor – Civil Engineering TechnologyKnoxville, TennesseeRequired Qualifications: Bachelor’s degree or higher from a regionally accredited college/university in the Civil Engineering Technology teaching field or closely related field and three years’ work experience in the field. Please note: to scan, upload, or attach documents, a computer and scanner are available at the Hardin Valley Campus Educational Resources Center, if needed.
Adjunct Instructor – Electrical Engineering Technology TNBR CareersAdjunct Instructor – Electrical Engineering TechnologyKnoxville, TennesseeRequired Qualifications: Bachelor’s degree or higher from a regionally accredited college/university in the Electrical Engineering Technology teaching field or closely related field and three years’ work experience in the field. Please note: to scan, upload, or attach documents, a computer and scanner are available at the Hardin Valley Campus Educational Resources Center, if needed.
Summer Scholar , Engineering Standard AeroSummer Scholar , EngineeringMaryville, TNOur services include MRO for aircraft and rotorcraft engines, auxiliary power units (APUs) and components; airframe services including major alterations; FAA authorized avionics capabilities; comprehensive engineering services; and custom exterior and interior design, completion and paint. Our goal is to be the best place to work, giving each and every employee the opportunity to reach their maximum potential through continuous learning and advancement opportunities, allowing all team members to exceed their potential and empower everyone’s success.
Electrical Engineering Manager, Power & Electronics GEM TechnologiesElectrical Engineering Manager, Power & ElectronicsOak Ridge, TennesseeThe ideal candidate is a highly-skilled and experienced manager that can effectively lead a multidisciplinary team responsible for facility electrical power systems, machine power distribution, machine control electronics, and electrical hardware design. Founded in 1994 as a nuclear engineering firm to support federal operations in East Tennessee, GEM has since expanded into a nationwide, multi-disciplinary provider with over 270 employees and a diverse portfolio of contracts in the environmental, nuclear, and defense sectors.
Power and Electronics Engineering Manager Geosyntec Consultants, Inc.Power and Electronics Engineering ManagerOak Ridge, TennesseeFull timeEssential Duties and Responsibilities: We are seeking a highly skilled and experienced manager to lead a multidisciplinary team responsible for facility electrical power systems, machine power distribution, machine control electronics, and electrical hardware design. Geosyntec is an innovative, international engineering and consulting firm serving private and public-sector clients to address new ventures and complex problems involving our environment, natural resources, and civil infrastructure.
NewEngineering Tech II - Offsite Locations Full Time Days East Tennessee Children's Hospital AssociationEngineering Tech II - Offsite Locations Full Time DaysKnoxville, TennesseeCoordinates shutdown of the various plumbing systems, as needed: Natural gas, Medical gases (e.g., oxygen, air and vacuum), Heating systems (traps, valves, controls, piping and various types of heating equipment), Outside utilities (on premises) sewer and storm drains, gas, water, Water distillers, Renal dialysis equipment, Various pumps, Hot and cold water tanks and systems, Drain cleaning, Steam piping, Water booster systems, Fire protection, and Piping for machinery. Provides correct and timely maintenance of various aspects of facility: Maintains the facility heating, ventilation, air conditioning, refrigeration, and related control systems.
NewEngineering Tech II - Offsite Locations Full Time Days East Tennessee Childrens HospitalEngineering Tech II - Offsite Locations Full Time DaysKnoxville, TNCoordinates shutdown of the various plumbing systems, as needed: Natural gas, Medical gases (e.g., oxygen, air and vacuum), Heating systems (traps, valves, controls, piping and various types of heating equipment), Outside utilities (on premises) sewer and storm drains, gas, water, Water distillers, Renal dialysis equipment, Various pumps, Hot and cold water tanks and systems, Drain cleaning, Steam piping, Water booster systems, Fire protection, and Piping for machinery. Provides correct and timely maintenance of various aspects of facility: Maintains the facility heating, ventilation, air conditioning, refrigeration, and related control systems.
Engineering Technician III Terracon Consultants IncEngineering Technician IIITNICC certification in two or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding. American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT).
Engineering Technician II Terracon Consultants IncEngineering Technician IIPowell, TNAmerican Welding Society (AWS) Certified Associate Welding Inspector (CAWI)American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT).Other national, regional, state, and local Materials related certifications requiring experience and written examination will also be considered if deemed appropriate by the Terracon Department Manager. NICET Level II certification in Geotechnical in one or more of the following categories: Construction, Laboratory, Exploration, GeneralistICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding.
Control Systems Engineering Group Supervisor Bechtel CorpControl Systems Engineering Group SupervisorKnoxville, TNExtraordinary teams building inspiring projects: Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world''s infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. In addition, it will be required that the candidate have excellent communication skills (both verbal and written), and can be the "face" of Bechtel, promoting our leadership, quality, and safety values, to external partners including vendors, construction companies, and other subcontractors.
Fusion Power Opportunities - Knoxville - TN - Engineering & Design AECOMFusion Power Opportunities - Knoxville - TN - Engineering & DesignKnoxville, TNWe invite you to bring your bold ideas and big dreams and become part of a global team of nearly 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. AECOM''s broad technical capabilities, global footprint and experience in executing large scale projects uniquely position us to lead in traditional steam, thermal power generation and advanced nuclear technologies.
Engineering System Administrator, Principal Centrus Energy CorpEngineering System Administrator, PrincipalOak Ridge, TNIn addition, once employe, employees will become part of a random drug testing program and may also be tested in the event of any incident causing injury or causing damage to property, or if it is determined that there is a reasonable suspicion the employee is under the influence of drugs or alcohol. In this position, you'll design, secure, and sustain the control systems and OT infrastructures that keep essential DOE and energy‑sector operations running-spanning nuclear facilities, accelerator systems, experimental platforms, and site‑wide operational technologies.
Associate R&D Staff Member in Data Science for Advanced Manufacturing (Temporary) Oak Ridge National LaboratoryAssociate R&D Staff Member in Data Science for Advanced Manufacturing (Temporary)Knoxville, TNOverview: We are seeking an Associate R&D Staff Member in Data Science for Advanced Manufacturing who will focus on the development of next-generation, data-driven manufacturing systems that integrate artificial intelligence, real-time sensing, and digital twins to transform how critical components are designed, produced, and qualified. Major Duties/Responsibilities: Develop and deploy data analytics, machine learning, and statistical modeling methods for multimodal manufacturing datasets, including sensor streams, in-process signals, post-process characterization data, simulation outputs, and digital twin data.
Applications Engineer - Advanced Manufacturing Oak Ridge National LaboratoryApplications Engineer - Advanced ManufacturingKnoxville, TNBasic Qualifications: BS in mechanical engineering, electrical engineering, mechatronics, robotics, computer engineering, computer science, or closely related field with at least four years of relevant experience. This position resides in the Manufacturing Systems Analytics (MSA) Group in the Manufacturing Science Division (MSD), Energy Science and Technology Directorate (ESTD), at Oak Ridge National Laboratory (ORNL).
Section Head, Data and AI Systems Research Oak Ridge National LaboratorySection Head, Data and AI Systems ResearchOak Ridge, TNRequisition Id 16046 Overview: The Computer Science and Mathematics Division (CSMD) is seeking an internationally recognized and research active computational scientist to lead and grow world class research capabilities focused on solving the world's most challenging problems through artificial intelligence and data driven algorithms and systems. Purpose: As part of our research team, you will provide Research and Development (R&D) leadership to a thematic area of science and technology that integrates several thematically aligned R&D groups consistent with ORNL's aspiration to be the world's premier R&D institution and ORNL's science culture.
Postdoctoral Research Associate - Data Science for Advanced Manufacturing Oak Ridge National LaboratoryPostdoctoral Research Associate - Data Science for Advanced ManufacturingOak Ridge, TNOverview: We are accepting applications for Postdoctoral Research Associate positions in Data Science for Advanced Manufacturing that will focus on the development of next-generation, data-driven manufacturing systems that integrate artificial intelligence, real-time sensing, and digital twins to transform how critical components are designed, produced, and qualified. Develop and deploy data analytics, machine learning, and statistical modeling methods for multimodal manufacturing datasets, including sensor streams, in-process signals, post-process characterization data, simulation outputs, and digital twin data.
AI Security Systems Architect Oak Ridge National LaboratoryAI Security Systems ArchitectOak Ridge, TNRequired Qualifications: MS Degree in Computer Science, Computer Engineering, Cybersecurity, or related fields with 2-7 years of experience or PhD in Computer Science, Computer Engineering, Cybersecurity, or related fields with 2 years of experience. This person will play a key role within ORNL's Center for AI Security Research (CAISER) where he or she will work to advance the state-of-the-art in Automated, Agentic workflows for AI Security research, testing and evaluation.
Electrical Controls Engineer 3 Denso CorpElectrical Controls Engineer 3Maryville, TN$96,000–$120,000 / yearJOB SUMMARY: Under limited supervision, designs, documents, fabricates, implements and troubleshoots controls for semi-automatic and automatic manufacturing equipment, with end goals of improving production safety, quality, capacity and/or lower costs. ESSENTIAL DUTIES AND RESPONSIBILITIES: Designs safety and operational controls for new and existing equipment and troubleshoots any issues with these controls, referring complex issues to more experienced engineers when needed.
Postdoctoral Research Associate - Programming Systems for Extreme Heterogeneity Oak Ridge National LaboratoryPostdoctoral Research Associate - Programming Systems for Extreme HeterogeneityOak Ridge, TNYou will explore how compilers, runtimes, and AI-driven agents can co-optimize complex architectures, reasoning across conventional processors (CPUs/GPUs), custom accelerators, and next-generation quantum and analog devices. Performance Engineering at Scale: Profile, model, and optimize distributed codes using MPI, OpenMP, CUDA, ROCm, and related HPC technologies while bridging theoretical AI models with real hardware constraints.
SCADA Engineer Hoffman Mechanical Solutions IncSCADA EngineerTNThis role is suited for an experienced engineer who can work independently on complex tasks while collaborating closely with project managers, designers, and customers to deliver reliable, scalable systems. Bachelor's degree Computer Science, Computer Engineering, Electrical Engineering, Mechanical Engineering, Mechatronics, Industrial Engineering or equivalent experience.
Enterprise Architect Team Health Holdings IncEnterprise ArchitectKnoxville, TNThis role partners with business and IT stakeholders to understand the "how" and the "why" behind processes, capabilities, and technology needs, and translates those needs into clear, decision-grade architecture artifacts. Participate in architecture governance forums (e.g., ARB, design panels) by reviewing materials, facilitating working sessions as needed, documenting outcomes, and tracking follow-up actions.
Real-Time Engineer Type One Energy GroupReal-Time EngineerKnoxville, TennesseeThe successful candidate will work closely with the PCS lead scientist and CODAC (Control, Data Access, and Communication) engineers to design, implement, test, and maintain real-time control software and supporting hardware infrastructure. Our FusionDirect development program pursues the lowest-risk, shortest-schedule path to a fusion power plant over the coming decade, using a partner-intensive and capital-efficient strategy.
Senior Research Scientist, HPC and AI Oak Ridge National LaboratorySenior Research Scientist, HPC and AIOak Ridge, TNOverview: The Analytics and AI methods at Scale (AAIMS) group in the National Center for Computational Science (NCCS) is hiring Senior Research Scientist to push the frontier of AI for science such as: scientific reasoning, federated & collaborative learning, and reinforcement learning (RL) for self-improving models on leadership-class supercomputers. Federated & Collaborative Learning: Cross-silo training across institutions and facilities; privacy-preserving learning (secure aggregation, differential privacy, MPC/HE); personalization under heterogeneity; governance-aware data/model sharing; collaborative evaluation.
Junior Developer - Platform Integration Specialist Oak Ridge National LaboratoryJunior Developer - Platform Integration SpecialistKnoxville, TNThe MDF hosts a diverse set of advanced manufacturing systems - including powder bed, directed energy deposition, machining, polymer, and convergent manufacturing systems - used to produce critical components from advanced materials. Overview: We are seeking a Technical Professional who will focus on support to develop software to help create the digital factory of the future, assist industry in optimizing their organizations, and supporting the energy needs of the public.
Postdoctoral Research Associate - HPC and Al Oak Ridge National LaboratoryPostdoctoral Research Associate - HPC and AlOak Ridge, TNPreferred Requirements: The prospective candidate should be well-versed with deep neural networks, have experience working on PyTorch or similar DL frameworks, programming in Python (preferred), NLP packages and pipelines, usage and understanding of basic Machine Learning algorithms and tools. Overview: The Analytics and AI Methods at Scale (AAIMS) group at the National Center of Computational Science (NCCS) at the Oak Ridge National Laboratory (ORNL) is seeking motivated and talented postdoctoral research associate(s) to join our dynamic team.
Research Scientist, Distributed Workflows Oak Ridge National LaboratoryResearch Scientist, Distributed WorkflowsOak Ridge, TNWorking within the Workflows and Ecosystem Services (WES) Group at the National Center for Computational Sciences (NCCS), you will design and deploy APIs, service meshes, and workflow orchestration systems that bridge leadership computing resources, instruments, and cloud platforms. WES designs and implements workflow, data, and ecosystem technologies that enable reliable, automated execution of scientific applications across heterogeneous, geographically distributed computing environments, integrating compute, storage, networking, and visualization resources into cohesive, end-to-end systems.
Full Stack Developer Xcel EngineeringFull Stack DeveloperOak Ridge, TNFull timeXCEL Engineering is a part of IT Lab Partners (ITLP) whichwas created to support Oak Ridge National Laboratory (ORNL) in recruiting the best and the brightest technical talent to East Tennessee region. All qualified applicants will receive consideration for employment without regards to race, color, religion, religious creed, gender, sexual orientation, gender identity, gender expression, transgender, pregnancy, marital status, national origin, ancestry, citizenship status, age, disability, protected Veteran Status, genetics or any other characteristics protected by applicable federal, state or local law.
HPC Software Engineer Oak Ridge National LaboratoryHPC Software EngineerOak Ridge, TNBasic Qualifications: BS degree in computer science, computer engineering, information technology, information systems, science, engineering, business, or a related discipline and a minimum of 5 years of aligned professional experience is required for consideration. Major Duties/Responsibilities: Advocate and promote HPC and clustered computing software solutions to researchers who process large data sets, run simulations, and develop scientific code as part of their projects.
Senior Research Scientist Advanced Computing Systems Oak Ridge National LaboratorySenior Research Scientist Advanced Computing SystemsOak Ridge, TNThe ATS is an applied research and development organization that provides scientific, technical, and thought leadership for the deployment of compute- and data-intensive computing environments, partnering closely with system vendors, national laboratories, and the broader HPC research community to shape the trajectory of leadership computing. Overview: The Advanced Technologies Section (ATS) at Oak Ridge National Laboratory is seeking a highly motivated and experienced Senior Research Scientist to provide scientific and technical leadership in systems architecture for next-generation leadership-class high-performance computing.
Group Leader, Multimodal Sensor Analytics Oak Ridge National LaboratoryGroup Leader, Multimodal Sensor AnalyticsKnoxville, TNThis position resides in the Multimodal Sensor Analytics (MSA) group in the Energy Sensing Analytics and Communications (ESAC) section, Electrical and Energy Infrastructures Division (EEID), Energy Science and Technology Directorate (ESTD), at Oak Ridge National Laboratory (ORNL). The MSA Group Leader will be responsible for leading research in AI/ML for sensor analytics systems, work with the section head to develop strategies for maintaining and growing technical application spaces and leading a group of 8-12 researchers within MSA.
Multi-Function Information Systems Engineer Oak Ridge National LaboratoryMulti-Function Information Systems EngineerOak Ridge, TNBasic Qualifications: A BS in information technology, information systems, computer science, computer engineering, business, science, or a related field of study and a minimum of 5 years of Windows systems engineering and administration experience is required for consideration. Overview: We are seeking a Multi-Function Information Systems Engineer who will be responsible for the end-to-end design, development, integration, deployment, and sustainment of complex systems that include both software and hardware/infrastructure components.
NewHybrid Full-Stack Developer Own Complex, Apps SegraHybrid Full-Stack Developer Own Complex, AppsKnoxville, TNYou will collaborate closely with cross-functional teams to ensure effective solutions and integration with various platforms. Segra is looking for a role that involves application development, focusing on lifecycle, maintenance, and testing of enterprise software.