Metrology Engineering Technician- 1st Shift Karman Holdings IncMetrology Engineering Technician- 1st ShiftArlington, TXWe enable successful space operations with mission-critical technology supporting every step from first launch to final landing, including launch vehicle subsystems, propulsion systems, aerodynamic and interstage systems, and payload protection and deployment. Building on nearly 50 years of success, we deliver Payload & Protection Systems, Aero/Hydrodynamic Interstage Systems, and Propulsion & Launch Systems to more than 80 prime contractors supporting over 130 space and defense programs.
Engineering Technician II (Nights) Entegris IncEngineering Technician II (Nights)Austin, TXPrevious manufacturing experience is a plus; Knowledge of inventory management; SAP experience is a plus; Working knowledge of ISO 9001, ISO 45000; Frequently lift up to 50lbs and push up to 130lbs; Flexible, able to rapidly respond to new situations and to perform multiple tasks. What You'll Do: Run purifications systems under specific quality and engineering controls; Perform decontamination of manufacturing equipment; Sample, fill, and inspect final products.
P&C Technician II - Senior (Victoria, TX) American Electric Power Co IncP&C Technician II - Senior (Victoria, TX)Victoria, TX$34.96–$52.70 / hourThe following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions:, DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task., What We Are Looking for: Education requirements are listed below: Associate's degree in electrical engineering technology, electronic technology or related technology field., or equivalent education and/or experience.
P&C Technician II American Electric Power Company, Inc.P&C Technician IICorpus Christi, TX$34.96–$52.70 / hourThe following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task. What We Are Looking for: Education requirements are listed below: Associate's degree in electrical engineering technology, electronic technology or related technology field., or equivalent education and/or experience.
Mechanical Engineering Technician IV KULR Technology Group IncMechanical Engineering Technician IVWebster, TX$34.48–$42.79 / hourThe Mechanical Technician will combine manual dexterity, attention to detail, and use of hand and power tools and commercial production equipment in a range of fabrication and maintenance processes that support a number of KULR's development activities. Conduct, assist, and/or facilitate lithium-ion battery testing, including electrical cycling and/or forms of destructive thermal runaway experiments (on-the-job training can be provided for this function).
Advanced PAUT Technician Oceaneering International IncAdvanced PAUT TechnicianHouston, TXPerform specialized NDE inspections, including PAUT, AUT Corrosion Mapping, and other advanced ultrasonic testing methods on piping, pressure vessels, pipelines, and structural components in onshore and offshore environments. The role emphasizes advanced ultrasonic testing (UT) methods, including Phased Array Ultrasonic Testing (PAUT) and Automated Ultrasonic Testing (AUT) Corrosion Mapping.
Equipment Engineering Technician, Metrology Tower Semiconductor LtdEquipment Engineering Technician, MetrologySan Antonio, TXPlease SelectCAL STATE LONG BEACHCal State Los AngelesCalifornia Institute of TechnologyCARNEGIE MELLON UNIVERSITYCSU - Dominguez HillsCypress CollegeDE VRY INSTITUTE OF TECHNOLOGYGEORGE WASHINGTON UNIVERSITYGeorgia Tech, AtlantaGolden West CollegeCollege-Not ListedIrvine Valley CollegeITT Technical InstituteLong Beah City CollegeOrange Coast CollegeOregon State UniversityPATTS Colleges of Aeronautics-ManilaPENN STATEPEPPERDINE UNIVERSITYPURDUE UNIVERSITYRensselaer Polytechnic InstituteArizona State UniversityRochester Institute of TechnologySaddleback CollegeSanta Ana CollegeSt. Mary''s UniversityStanford UniversityTexas A&M, College StationTexas A&M, San AntonioTexas State Technical College, WacoTexas State UniversityTexas Tech UniversityBaylor UniversityThe Ohio State UniversityTrinity UniversityUC BERKELEYUC IRVINEUC LOS ANGELESUC RIVERSIDEUC San DiegoUC Santa BarbaraUC, San DiegoUCLABrown UniversityUNIVERSITY OF ARIZONAUniversity of PhoenixUniversity of Texas, AustinUniversity of Texas, San AntonioUniversity of the Incarnate WordUSCVanguard UniversityWASHINGTON STATE UNIVERSITYCA STATE NORTHRIDGEOtherCAL POLY POMONACAL STATE DOMINGUEZ HILLSCAL STATE FULLERTON.
NewPropulsion Engineering Technician (R6045) Shield AI IncPropulsion Engineering Technician (R6045)Dallas, TX$29–$44 / hourWe may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. You will be part of a small, high-performance group responsible for designing, building, and executing propulsion system tests that push the limits of autonomous aircraft capability.
Geotechnical Field Technician Engineering Consulting Services LtdGeotechnical Field TechnicianFort Worth, TXLifting - The employee will regularly lift and/or move/shake up to 40 pounds [soil and/or concrete tests and related apparatus]; frequently lift and/or move up to 60-80 pounds [soils and sand samples, and nuclear density equipment]; and occasionally move more than 100 pounds [such as a loaded wheelbarrow of concrete samples]. As experience increases, ECS will encourage and aid technicians in increasing level of competence and skills through both internal and external training programs of certification provided by ACI, ASNT, AWS, ICC, NICET, NRCA, IIBEC, various State DOT's, WACEL and others, as appropriate.
Maintenance Technician Steris PlcMaintenance TechnicianEl Paso, TX$21.63–$30 / hourOptimizes processing and reduces downtime by performing predictive and preventative maintenance on all equipment, machinery and facility buildings; participating in the installation of new equipment as required; maintaining electrical system, including facility lighting by installing and repairing wiring and fixtures; and performing general maintenance tasks, including landscaping, painting, and carpentry. Additionally, this position includes responsibility for maintaining shop tools, inventory, and keeping the department's CMMS (computerized maintenance management system) updated all while adhering to Lean and 5S principles.
NewEngineering Technician AcutronicEngineering TechnicianAustin, TXFull timeAcutronic is looking for an Engineering Technician who will perform a critical role within the Aerospace Components Division and serves as a champion of product development prototyping and testing within the Engineering Team. These products are used on next-generation aerospace programs and include a range of electric power systems, servo-actuators, micro-turbines, and Hybrid-Electric-Propulsion-Systems.
Field Service Technician Five and FlyField Service TechnicianVarious Locations, Texas$30–$40 / hourPrior experience as an electrician or electrical technician working with any of the following technologies: three-phase systems, uninterruptible power supplies, electrical generation and distribution systems, power electronics, automatic transfer switches, and microprocessor-based control platforms. Technical diploma, Journeymen Certification, Electrician Certification in a technical field, and relevant industry experience of 4 years (electrician, electronics technician, field service, technician, test engineer, etc.).
Pharmacy Technician II Sofie Biosciences IncPharmacy Technician IIHouston, TXEnsure aseptic operations follow internal procedures (gowning, cleaning/sanitation, sterility, environmental monitoring, etc.), customer requirements, and FDA regulations. Responsible for opening change controls and initiating, maintaining, and reviewing SOFIE network and site specific.
CMT Field Technician - Wichita Falls Universal Engineering SciencesCMT Field Technician - Wichita FallsWichita Falls, TXFull timeAbility to effectively present information and respond to questions from groups of managers, clients, customers and the general public Travel Requirements: This position requires extensive travel, approximately up to 70% of the time, in support of business objectives and client engagements. Physical Demands & Work Environment: Work normally performed outside includes exposure to weather conditions such as precipitation, extreme cold or heat, dusty and noisy work environments.
Construction Material Testing Technician Universal Engineering SciencesConstruction Material Testing TechnicianHouston, TXFull timeAbility to effectively present information and respond to questions from groups of managers, clients, customers and the general public Physical Demands & Work Environment: Work normally performed outside includes exposure to weather conditions such as precipitation, extreme cold or heat, dusty and noisy work environments. Who We Are: At UES, we’re a team of more than 4,000 engineers, scientists, geologists, inspectors, technicians, and drillers united by a shared purpose—to make a meaningful impact in the communities we serve.
CMT Field Technician Universal Engineering SciencesCMT Field TechnicianROUND ROCK, TXFull timeAbility to effectively present information and respond to questions from groups of managers, clients, customers and the general public Travel Requirements: This position requires extensive travel, approximately up to 70% of the time, in support of business objectives and client engagements. Physical Demands & Work Environment: Work normally performed outside includes exposure to weather conditions such as precipitation, extreme cold or heat, dusty and noisy work environments.
NewCMT Field Testing Technician Universal Engineering SciencesCMT Field Testing TechnicianROUND ROCK, TXFull timeAbility to effectively present information and respond to questions from groups of managers, clients, customers and the general public Travel Requirements: This position requires extensive travel, approximately up to 70% of the time, in support of business objectives and client engagements. Physical Demands & Work Environment: Work normally performed outside includes exposure to weather conditions such as precipitation, extreme cold or heat, dusty and noisy work environments.
CMT Technician/ICC Inspector Atlas Technical Consultants IncCMT Technician/ICC InspectorLubbock, TXYou will be a part of seasoned, highly-qualified team that performs Geotechnical and Materials Engineering, Construction Materials Testing (CMT), ICC Special Inspections, and Construction Inspections of some of the most complex and transformational infrastructure and industrial projects in our region. Performs field soil and Hot-Mix Asphalt (HMA) density testing using a nuclear density gauge and maintains proper handling procedures in accordance with radiation safety and HAZMAT requirements.
Travelling CMT Technician/ICC Inspector Atlas Technical Consultants IncTravelling CMT Technician/ICC InspectorSan Antonio, TXYou will be a part of seasoned, highly-qualified team that performs Geotechnical and Materials Engineering, Construction Materials Testing (CMT), ICC Special Inspections, and Construction Inspections of some of the most complex and transformational infrastructure and industrial projects in our region. Performs field soil and Hot-Mix Asphalt (HMA) density testing using a nuclear density gauge and maintains proper handling procedures in accordance with radiation safety and HAZMAT requirements.
Concrete & Density Quality Control Technician Mario Sinacola & Sons Excavating IncConcrete & Density Quality Control TechnicianDallas, TXAbility to read project specifications, mix designs, batch tickets, Proctor reports, and testing documentation. We are a 100% employee-owned organization, fostering a strong team atmosphere where everyone shares in the success through our Employee Stock Ownership Plan.