94 Results for

Controls Technician Jobs in Grand Rapids, MI

Jobs

New!

Dutton, MI2 days ago

$23.80–$43.85 Per Hour

Additional Requirements and Environmental Exposure : Must be able to safely and legally operate a vehicle using a seat belt Must be able to wear helmets, safety goggles, fall protection harness, and safety boots to safely perform job duties Must be able to twist the trunk of your body 90 degrees in each direction Must be able to squat and touch the floor with both hands Must be able to reach your hands over your head Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling, and climbing ladders. · Must be able to maneuver access areas, as small as 30” vertical x 45” horizontal · Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally up to 50 feet · This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location.

New!

Dutton, MI2 days ago

$28.96–$39.02 Per Hour

Additional Requirements and Environmental Exposure: Must be able to safely and legally operate a vehicle using a seat belt Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties Must be able to twist the trunk of your body 90 degrees in each direction Must be able to squat and touch the floor with both hands Must be able to reach your hands over your head Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. or less Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location Annual Base Salary Range or Hourly Base Pay Range: $28.96 - $39.02 Compensation Type: Hourly Incentive Eligible: No Sales Commission Eligible: No Disclaimer : We strive to provide competitive compensation for this position, tailored to a variety of factors.

Greenville, MI15 days ago

$28.50–$41

This position is in Cargill’s protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196.

Kentwood, MI15 days ago

$28.50–$41

Belding, MI15 days ago

$28.50–$41

Wayland, MI15 days ago

$28.50–$41

New!

Comstock Park, MIToday

Full-time

Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles.

New!

Holland, MI5 days ago

$62,400–$68,640

Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual’s skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual’s skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs.

Byron Center, MI12 days ago

Ada, MI13 days ago

$28–$42 Per Hour

As an Electronic Control Technician on the team, your focus will be on installing, calibrating, maintaining and repairing electrical systems, devices and components applicable to manufacturing and facilities related equipment which requires broad knowledge of electrical principles and PLC controls. The Technician will also work with and/or partner with maintenance personnel (including HVAC Mechanics, Electricians, and Apprentices) on troubleshooting issues, installing systems and handling upgrades, as well as overseeing outside contractors and vendors.

Holland, MI7 days ago

The Maintenance / Controls Technician at Magna Engineered Glass supports the Maintenance and Manufacturing Engineering team with change overs, troubleshooting, repairing and performing Preventative Maintenance activities (PM’s) on robotic, electrical, hydraulic, pneumatic, and automated systems. Meets all Level 1 requirements plus: Associate’s degree in a technical discipline and / or significant amount of related work experience or completion of apprenticeship as mechanic or electrician (i.e. journeyman card) and 2-3 years of experience in an automation environment.

Grand Rapids, MI30+ days ago

If you're passionate about automation, eager to roll up your sleeves on a variety of challenging projects, and thrive in environments where continuous improvement is the norm, this role could be the perfect fit. The successful candidate will focus on installing, programming, troubleshooting, and maintaining control systems for all test and assembly equipment on-site.

New!

Grand Rapids, MI2 days ago

The role demands physical capability, requiring you to lift up to 40 lbs, operate a vehicle, and perform on-site work in varying conditions. A leading climate solutions company in Grand Rapids is seeking a skilled HVAC Controls Technician.

Grand Rapids, MI30+ days ago

Plans and performs work requiring a thorough knowledge of electrical/electronic theories and principles, writing specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment. The Controls Technician primary responsibility is to perform installation, Continuous Improvement, Preventive Maintenance, troubleshooting and repair of Test and Assembly Equipment.

Rockford, Michigan30+ days ago

$90,000–$115,000

Responsibilities of the Controls Technician:Layout, design, build, wire, install, program, and troubleshoot electrical control panels, junction boxes, limit switches, sensors, motors (AC/DC), conduit, and other electrical components. Previous experience as a Maintenance Controls Tech, Controls Electrician, Field Service Tech, Controls Engineer is desired.

Marne, MI13 days ago

$23–$30 Per Hour

This role focuses primarily on commercial pest control accounts, including restaurants, office buildings, apartment complexes, and industrial spaces. This position is ideal for someone who takes pride in their work, communicates well, and thrives in a fast-paced, team-driven environment.

Grand Rapids, Michigan22 days ago

$50,000–$60,000 Per Year

Holland, Michigan22 days ago

The Maintenance / Controls Technician at Magna Engineered Glass supports the Maintenance and Manufacturing Engineering team with change overs, troubleshooting, repairing and performing Preventative Maintenance activities (PM's) on robotic, electrical, hydraulic, pneumatic, and automated systems. The Magna Exteriors portfolio of products includes access systems such as liftgates, exterior trim, modular systems, front-end modules including fascia, active aerodynamic systems and other lightweight structural components for automotive, commercial truck and other industrial markets.

Grand Rapids, MI30+ days ago

$75,000–$110,000 Per Year

Controls Engineer, Level 2/3: Minimum 2 years of experience in Controls Engineering and Controls Design, with recognized technical expertise, ability to lead larger projects, interface with customers, support other team members, and be a self-starter. Position Description: Controls Engineers work with peer groups, Project Managers, Mechanical Engineers, Builders, Technicians and other personnel to design, implement and document control systems for various types of automation and robotic equipment.

Grand Rapids, Michigan25 days ago

$18–$19 Per Hour
Temporary

Holland, MI9 days ago

Our Client: A leader in the engineering, manufacturing, and installation of custom equipment and integrated systems is seeking a motivated and skilled Level 1 PLC and ACADE Controls Designer to join their innovative team. Write and develop PLC programs from scratch, utilizing various documentation such as sequence of operation, order acknowledge write-ups, ACADE wiring diagrams, and P&ID diagrams.

Grand Rapids, MI26 days ago

In this pivotal role, you will play an integral part in supporting manufacturing processes, troubleshooting equipment, and ensuring optimal performance across a range of systems. Manufacturing Engineering TechnicianOur client is seeking a dedicated and skilled Manufacturing Engineering Technician - to join their growing team.

Grand Rapids, MI30+ days ago

Carry out monthly and yearly electrical maintenance procedures, repairing/or replacing parts as required, in accordance with our client's preventative maintenance program. Lead development of cell(s) during launch to de-bug and assist in correcting all tooling, robotic, controls, weld cycles, and all other equipment-related improvements.

New!

Wayland, MI2 days ago

$50,000–$77,000 Per Year

Calibration Technician, Instrument Technician, Metrology Technician, Calibration Specialist, Test Equipment Technician, Lab Calibration Technician, Measurement Technician, Quality Control Technician (Calibration), Industrial Calibration Technician, Field Calibration Technician . If you're ready to take the next step in your career and connect with a firm that values fit over speed, we invite you to reach out at The Pivot Group Network offers resources to support your search-market insights, resume feedback, and interview preparation.

Grand Rapids, MI30+ days ago

Troubleshoot, repair, and maintain production equipment, including CNC and manual machines such as brake presses, lasers, mills, saws, compressors, and dryers. We are seeking a skilled Maintenance Technician to support production by troubleshooting, repairing, and maintaining a variety of equipment.

Kentwood, MI30+ days ago

The Maintenance Tech performs highly diversified duties including, but not limited to: Mechanical, electrical, pneumatic, and hydraulic troubleshooting. Repair of machines, equipment, and plant facilities including scheduled, unscheduled, or emergency repairs.

Grand Rapids, MI13 days ago

$25–$30 Per Hour

Hands-on maintenance role responsible for preventive maintenance, troubleshooting, and repair of manufacturing equipment, ensuring maximum uptime, safety compliance, and production efficiency in a cleanroom environment. Electrical troubleshooting and machine controls 2 years.

Coopersville, MI30+ days ago

POSITION OVERVIEW:The Service Technician is responsible for diagnosing, repairing, and maintaining commercial car wash equipment throughout Michigan. We are expanding and seeking an experienced Service Technician who can operate independently, troubleshoot efficiently, and represent our company professionally in the field.

Grand Rapids, MI8 days ago

$20–$23 Per Hour

Requests new orders from referring offices when necessary; Coordinates specialty pharmacy/free drug programs and medication delivery when needed; Completes and documents appropriately related to filling prescriptions and receiving drug orders. The employee may be required to use safety equipment, PPE (personal protective equipment) that may include but not be limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment.

Grand Rapids, MI14 days ago

Ability to assist with managing projects and resources effectively, including PLC programming and troubleshooting, understanding advanced electrical prints and schematics to facilitate complex repairs or installation of equipment . Complete appropriate paperwork, including machine documentation, panel documentation, and preventive maintenance records to ensure adequate documentation needed to enhance the elimination of equipment downtime.

Ada, MI30+ days ago

Support equipment—Conair, multiple grinders and auto-deflashers, air and belt conveyance systems, bottle hoppers, Mettler Toledo vision systems, leak detectors, and takeout system. Frequent bending and continuous twisting for the purpose of working on equipment from below level to overhead, picking, gathering and packing orders from shelves to conveyors and loading and combining orders, adding raw materials to blends and weigh-up .

New!

Fennville, MIToday

$20.75–$24.75 Per Hour

PHYSICAL DEMANDS: While performing the duties of this job, the associate is required to stand, walk, use hands and fingers, handle or feel objects, tools, or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. **Please note that Life EMS tries to accommodate all schedules, but as an EMS agency, you may be required to work shifts outside of your requested availability so we can assist our patients and communities.

Lake Odessa, MI13 days ago

$38–$41 Per Hour

Hands-on maintenance role focused on electrical systems, PLC troubleshooting, and equipment reliability in a fast-paced food manufacturing environment. Use diagnostic tools (multimeters, oscilloscopes, calibration tools).

Grand Rapids, MI30+ days ago

Inspect, monitor and maintain coolant filters, washers, paint systems, air handling systems, etc. for sump changes and cleaning, as required to keep fluids within proper limits under limited direction of Site Manager or Program Manager. Provide other specifically agreed Fluidcare services as and when required by the Site Manager and/or Lead Technician – this may include operating a fork truck, recycling equipment, etc.

New!

Grand Rapids, MI1 day ago

$43,000–$68,000 Per Year

Welder Technician,Welding Technician,Weld Tech,Welding Tech,Fabricator Welder,Welder Fabricator,Structural Welder,Maintenance Welder,Industrial Welder,Certified Welder,Precision Welder,Robotic Welder,Weld Specialist,Welding Specialist,Field Welder,Shop Welder,Metal Fabricator . If you're ready to take the next step in your career and connect with a firm that values fit over speed, we invite you to reach out at The Pivot Group Network offers resources to support your search-market insights, resume feedback, and interview preparation.

New!

Byron Center, MI1 day ago

$46,000–$71,000 Per Year

Weld Technician,Welder,Fabricator,Brazing Technician,Soldering Technician,Welding Specialist,Maintenance Welder,Structural Welder,Pipe Welder,Robotic Welder,Custom Welder,Field Welder,Shop Welder,Metal Fabricator,Precision Welder . If you're ready to take the next step in your career and connect with a firm that values fit over speed, we invite you to reach out at The Pivot Group Network offers resources to support your search-market insights, resume feedback, and interview preparation.

New!

Grand Rapids, MI1 day ago

With a dedication to honoring commitments, creating positive experiences, fostering lifelong learning, exhibiting a pioneering spirit, and demonstrating good stewardship, you will contribute to our mission of providing top-notch service to our customers. Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, or parts, showcasing innovative problem-solving skills and techniques.

Grand Rapids, Michigan21 days ago

New!

Grand Rapids, MI3 days ago

Pro Services, Inc. is partnering with a leading global manufacturer to hire aMaintenance Technicianfor their Grand Rapids facility. You’ll join a collaborative maintenance team that prioritizes training, mentorship, and continuous improvement.

New!

Wyoming, Michigan6 days ago

Must possess a valid Driver’s License with at least one year of driving experience, a clean driving record (no major violations within last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by Company policy, and the ability to safely operate a vehicle required. Install, program and configure commercial electronic security systems for enterprise commercial clients (door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, ect.).

Grand Haven, MI30+ days ago

$25–$34 Per Hour

Perform preventive and corrective maintenance on equipment such as CNC laser cutters, press brakes, welders, powder coat lines, conveyors, and mechanical assembly stations. Kaidi LLC is a Smart Office division of Kaidi Electrical, and we produce inline actuators and understructure assemblies for height-adjustable desks.

New!

Middleville, MI4 days ago

Our essential products continue to support the health, safety, sanitation, and infrastructure of communities and for 2022 we've been recognized as an Energy Star Partner of the Year Sustained Excellence Award Winner for the third straight year. About the Company: Throughout a history dating back to 1881, Bradford White Corporation has been manufacturing some of the most high-performing, technologically advanced, and energy-saving products to the world market.

New!

Grand Rapids, MI2 days ago

This role partners closely with Engineering, Operations, Sales, and Customer Service to ensure accurate product data, technical support, and continuous improvement. Our customer, a local Grand Rapids Manufacturer, is seeking a Product Engineering Support Technician to join their growing team!

Grand Rapids, Michigan17 days ago

This position is expected to fulfill any service request in a timely manner acting independently to analyze problems and implement solutions while actively working with the Facilities team and internal customers Facilities Technician II will be expected to provide insight into projects as the subject matter expert and operate as the lead project manager when assigned. This person must be detail-oriented with excellent communication, specifically writing skills, project a professional image, display an exceedingly high level of customer service and organizational skills and be an excellent multi-tasker balancing several service requests and projects at one time across multiple facilities across the state.

Zeeland, Michigan30+ days ago

$26–$36

The employee must comply with the assigned location PPE requirements including but not limited to safety glasses, hearing protection, appropriate gloves, clothing, and shields for required tasks, and closed-toed or safety shoes as required by facility safety policies. With an ongoing tradition of providing excellent products and outstanding service for our customers, Energy Systems is one of the longest existing Generac Industrial Distributors in the United States.

Grand Rapids, MI30+ days ago

$20–$45 Per Hour

Completes all work orders in a timely manner, ensuring all labor and parts are charged to the appropriate work order line and comments are entered; understands reason and task codes and signs and checks parts order form. Overhaul and repair heavy duty engines, clutches, transmissions, differentials, and power systems, cooling systems, steering systems, hydraulic systems, or any other system used on medium and heavy-duty trucks.

New!

Caledonia, MI4 days ago

$45,000–$70,000 Per Year

Welder Technician,Welding Technician,Weld Tech,Welder,Fabricator Welder,Maintenance Welder,Robotic Welder,Structural Welder,Pipe Welder,Certified Welder,Welding Specialist,Welding Fabricator,Sheet Metal Welder,TIG Welder,MIG Welder,ARC Welder . If you're ready to take the next step in your career and connect with a firm that values fit over speed, we invite you to reach out at The Pivot Group Network offers resources to support your search-market insights, resume feedback, and interview preparation.

New!

Wyoming, MI5 days ago

$48,000–$74,000 Per Year

Weld Technician,Welder,Fabricator,Brazing Technician,Soldering Technician,Welding Specialist,Maintenance Welder,Structural Welder,Pipe Welder,Robotic Welder,Metal Fabricator,Welding Inspector,Welding Fitter,Custom Welder,Industrial Welder . If you're ready to take the next step in your career and connect with a firm that values fit over speed, we invite you to reach out at The Pivot Group Network offers resources to support your search-market insights, resume feedback, and interview preparation.

New!

Grand Haven, MI5 days ago

$49,000–$76,000 Per Year

Weld Technician,Welder,Fabricator,Welding Specialist,Maintenance Welder,Pipe Welder,Structural Welder,Industrial Welder,Custom Welder,Field Welder,Shop Welder,Brazing Technician,Soldering Technician,Welding Fabricator,Metal Fabricator,Precision Welder,Robotic Welder,Welding Inspector . If you're ready to take the next step in your career and connect with a firm that values fit over speed, we invite you to reach out at The Pivot Group Network offers resources to support your search-market insights, resume feedback, and interview preparation.

Grand Rapids, MI30+ days ago

Someone in this position at TRUNO will: Respond to all service requests timely, keep customer fully updated, and ensure service call completions are documented accurately with comprehensive details, as well as ensure any parts/equipment used are appropriately accounted for. Overall responsibility includes ensuring customer needs for any POS hardware, as well as additional hardware, issues that are reported are responded to, and the appropriate troubleshooting, diagnostics, repair, and thorough testing are completed.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Controls Technician job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

Controls Technician Jobs in Grand Rapids, MI

Controls Technician Trane Technologies

HVAC Controls Service Technician Trane Technologies

Boiler Technician Cargill

Ammonia Refrigeration Technician Cargill

HVAC Technician Cargill

Industrial Refrigeration Technician Cargill

Diesel Technician/Mechanic III - Entry Level Penske

Tech Team Lead Vaco LLC

Diesel Technician/Mechanic III - Entry Level Penske Truck Leasing Co., L.P.

Electronic Controls Technician - Day Shift (Ada, MI, United States, 49355) Amway

Maintenance / Controls Technician Magna Engineered Glass

Controls Technician (Night shift) iMPact Business Group, Inc.

HVAC Controls Technician: On-Site Diagnostics & Service Trane Technologies

Controls Technician - Night Shift ABC Technologies (USA Region)

Field Service Controls Tech Opportunity Group, Inc.

Pest Control Technician Parshall Companies

Pest Control Technician - Seasonal Orkin

Magna Engineered Glass: 2nd Shift Maintenance / Controls Tech Magna International, Inc

Controls Engineer Levels 2/3 Axis Automation

Pest Control Start Technician EcoShield Pest Solutions

Controls Design Engineer iMPact Business Group, Inc.

Manufacturing Engineering Technician iMPact Business Group, Inc.

Maintenance Technician iMPact Business Group, Inc.

Calibration Technician - Wayland Area the pivot group

Maintenance Technician Arrow Staffing Services

Maintenance Technician Makers Pride - USA

Maintenance Technician Three Point Solutions, Inc.

Car Wash EQUIPMENT Service Technician CrossFire Group

Certified Pharmacy Technician - Grand Rapids, MI Vivo Infusion

Maintenance Technician Tier II Pridgeon & Clay Inc

Manufacturing Technician I - Screen-Printing Focus (3rd Shift Plastics) (Ada, MI, United States, 49355) Amway

Emergency Medical Technician Life EMS Ambulance

Maintenance Technician (Electrical/PLC) Three Point Solutions, Inc.

Fluidcare Technician II Quaker Houghton

Weld Technician - Grand Rapids Area the pivot group

Weld Technician - Byron Center Area the pivot group

Experienced Service Technician/Diesel Mechanic JX Enterprises

Field Service Technician- Seasonal Orkin

Industrial Maintenance Technician Pro Services

Security Installation Technician II Allied Universal

Machine Maintenance Technician (1st shift) Kaidi LLC

Manufacturing Engineering Technician - 2nd Shift Bradford White

Product Engineering Technician iMPact Business Group

Technician II Facilities Versiti, Inc.

Industrial Generator Technician Generac Power Systems, Inc.

Diesel Technician - 2nd Shift - Grand Rapids Airoldi Brothers Inc

Weld Technician - Caledonia Area the pivot group

Weld Technician - Wyoming Area the pivot group

Weld Technician - Grand Haven Area the pivot group

Field Service Technician Truno

Resume Resources