NewSenior ASIC Physical Design Engineer Johns Hopkins Applied Physics Laboratory (APL)Senior ASIC Physical Design EngineerLaurel, MD$105,000–$290,000 / yearWe leverage our multi-disciplinary set of capabilities in custom application-specific integrated circuits (ASIC), printed circuit board (PCB), embedded software, field-programmable gate array (FPGA), and signal processing design to create ultra-small, low-power solutions that exceed comparable commercial alternatives. In this role, you will be responsible for all back-end flow aspects, including synthesis, top-level floor-planning, timing analysis and design partitioning to meet timing requirements, SCAN and BIST insertion, and physical verification checks.
NewElectronics Manufacturing Engineer Johns Hopkins Applied Physics Laboratory (APL)Electronics Manufacturing EngineerLaurel, MD$85,000–$195,000 / yearYour primary responsibility will be to interface with electrical and mechanical engineers from around the Laboratory, develop process plans and technical capabilities to build their hardware, and be hands on while leading the hardware development through the surface mount electronics fabrication area. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development.
Prin Engineer (Underground Transmission) ExelonPrin Engineer (Underground Transmission)Washington, DC$122,400–$168,300Develops and/or leads teams in studies, plans, criteria, specifications, calculations, evaluations, design documents, performance assessments, integrated systems analysis, cost estimates, budgets, associated with the planning, design, licensing, construction, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas, and telecommunication facilities/systems. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).
NewComputer Aided Manufacturing Engineer Johns Hopkins Applied Physics Laboratory (APL)Computer Aided Manufacturing EngineerLaurel, MD$100,000–$245,000 / yearComputer Aided Manufacturing Engineering for incoming printed circuit boards including rigid, rigid-flex, and flexible circuits, as well as developing processing flows for the fabrication area using CAM software. APL provides eligible staff with a comprehensive benefits package including retirement plans, paid time off, medical, dental, vision, life insurance, short-term disability, long-term disability, flexible spending accounts, education assistance, and training and development.
NewStructural Team Leader (Engineer) Synerfac Technical StaffingStructural Team Leader (Engineer)Fairfax, VADisclaimer: By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. About the Company: Our client is a broad-spectrum civil engineering, structural base building design, and specialty engineering services.
NewStructural Engineer Synerfac Technical StaffingStructural EngineerGaithersburg, MDperforms field surveys of existing construction, documents visual findings, devises and directs intrusive sampling work and prepares written reports regarding findings. About the Company: Our client is a consulting structural engineering firm specializing in the repair and rehabilitation of structures, structural elements and waterproofing systems.
POWER SYSTEMS DIVISION (PSD) APPLICATIONS ENGINEER Carter Machinery Company, IncPOWER SYSTEMS DIVISION (PSD) APPLICATIONS ENGINEERElkridge, MD$85,000–$115,000 / yearThe PSD Applications Engineer is responsible for assisting consulting engineers, contractors, and end-users in the design of power plants that result in the sale of Caterpillar power generation products. In addition to base pay, the compensation package may include participation in performance-based incentive programs (e.g., discretionary or non-discretionary plans), as well as overtime eligibility depending on the role.
NewSoftware Tester / QA Automation Engineer NuAxis InnovationsSoftware Tester / QA Automation EngineerWashington DC, DCThis role is expected to build and maintain a robust automated testing capability, with Cypress as a core browser/end-to-end automation framework, and integrate automated quality gates into CI/CD pipelines. · Create reusable test utilities, fixtures, data-management patterns, page/component abstractions, mocks/stubs where appropriate, and stable selector strategies to reduce flaky tests.
Systems Engineer - Mid Level DCS CorpSystems Engineer - Mid LevelQuantico, VirginiaReview, analyze, develop, and comment on technical documentation (e.g., DLA 339s, requirements, CAD files, test plans/reports, technical review documents, engineering change documents, processes and procedures) to address vehicle issues and identify technical risks. Represent the Program Office on site and provide the primary communication conduit for engineering issues related to the Depot PoP and Inspect and Repair Only As Necessary (IROAN) of ACVs (manufacturing processes; plant operations; production quality).
Model-Based Systems Engineer LeidosModel-Based Systems EngineerWashington, DC$69,550–$125,725Bachelor’s degree in engineering or related field with 2+ years of prior relevant experience or a master’s degree with at least a year experience in one of these areas: systems engineering, software engineering, test engineering or related field. March 30, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
NewCommercial Construction Project Engineer HITT ContractingCommercial Construction Project EngineerFalls Church, VA$77,000–$82,000 / yearMaster required job-specific and technical skills in order to promote to an assistant superintendent or assistant project manager following the 12-month training program including, but not limited to, the ability to: Set up and maintain jobsite office and all jobsite records, including project directory, construction documents, subcontractor directory, daily reports, submittal logs, RFI logs, subcontractor correspondence, etc. Ability to learn sector- and project-specific software systems, including but not limited to: Microsoft Office 365 (Project, Excel, Word, Outlook, PowerPoint, etc.), ProCore, Adobe Suite, BlueBeam, and JD Edwards software suite.
Senior Model Based Systems Engineer LeidosSenior Model Based Systems EngineerAlexandria, VA$107,900–$195,050Bachelor’s degree in engineering or related field with 8+ years of prior relevant experience or a master’s degree with 6+ years of experience in one of these areas: systems engineering, software engineering, test engineering or related field. Your role will directly support our diverse portfolio of programs through a combination of requirements and design architecture analysis; MBSE Model development; mentoring junior engineers and assisting technical leadership develop briefing material.
NewLead Specialist, Privileged Access Management (PAM) Engineer KPMGLead Specialist, Privileged Access Management (PAM) EngineerWashington, DCIf you're looking for a firm with a strong team connection where you can be your whole self, have an impact, advance your skills, deepen your experiences, and have the flexibility and access to constantly find new areas of inspiration and expand your capabilities, then consider a career in Advisory. Drive alignment between PAM strategies and overarching initiatives, ensuring seamless integration with Identify Governance and Administration (IGA, Single Sign-On (SSO, Multi-Factor Authentication (AFA), and directory services.
NewLead Specialist, Federal Cyber AppGate Engineer KPMGLead Specialist, Federal Cyber AppGate EngineerWashington, DCQualifications: A minimum of five years of experience with network security technology and diverse Zero Trust Network Access (ZTNA) solutions, including hands-on AppGate SDP implementation experience; U.S. Federal government consulting experience preferred. If you're looking for a firm with a strong team connection where you can be your whole self, have an impact, advance your skills, deepen your experiences, and have the flexibility and access to constantly find new areas of inspiration and expand your capabilities, then consider a career in Advisory.
NewWeapons Systems Test Engineer Johns Hopkins Applied Physics Laboratory (APL)Weapons Systems Test EngineerLaurel, MD$100,000–$245,000 / yearLead and contribute to multidisciplinary teams comprised of government sponsors, government labs, industry partners, and other UARCs/FFRDCs focusing on requirements decomposition and analysis, concept/technology development, acquisition, test planning and execution, system evaluation, post test data analysis decision support, and risk assessments. Have 3+ years of systems test engineering experience in the development and test and evaluation of complex systems, including one or more of the following: system requirements analysis; understanding system design and architecture; testing and analysis within a weapon/missile system development cycle; system verification and validation; ground / flight test planning and execution.
NewSenior Reliability Engineer Johns Hopkins Applied Physics Laboratory (APL)Senior Reliability EngineerLaurel, MD$100,000–$245,000 / yearFMEA, FMECA, Reliability Block Diagrams, Fault Tree Analysis, Probabilistic Risk Assessment and so forth) to quantify risk and inform program decisions in early concept development, acquisition, requirements analysis, design, test and evaluation, and sustainment. You will participate as a reliability SME in various projects, studies, and technical working groups focusing on requirements development, analysis, concept/technology development, acquisition, risk assessments, test planning and system evaluation.
Civil Project Engineer ASD GLOBALCivil Project EngineerHerndon, VA$90,000–$100,000 / yearFull timeResponsibilities include site evaluation, feasibility studies, concept planning, stormwater management, utility design, roadways, client interaction, and related aspects of the land development design process. You will experience a collaborative and collegial design team environment working closely with senior management to achieve client goals and objectives.
NewProgram Chief Engineer FIBERTEK, INC.Program Chief EngineerHerndon, VA$200,000–$250,000 / yearThe Program Chief Engineer will have high-impact responsibilities that include: Technical leadership of select programs resulting in the successful delivery of laser-based systems and technologies that demonstrate new operational capabilities critical to national interests in defense and space exploration. Leadership and mentoring of a diverse and extremely talented program team of engineers and scientists with expertise across related disciplines including laser physics, electro-optics, systems engineering, electronics, signal processing, and others.
Senior Software Simulation Engineer By Light Professional IT ServicesSenior Software Simulation EngineerChantilly, VAVeraxx has a high level of expertise in flight simulation hardware and software development, as well as computer architecture, tactical environments, interoperability (HLA/DIS), avionics systems, graphics and real-time embedded systems. Candidate will have the opportunity to work on a variety of flight simulators and develop/integrate software in areas such as avionics, tactical environments, interfaces to audio, visual, motion, and I/O systems, and Instructor Operator Stations (IOS).
NewSenior Wireless Reverse Engineer Johns Hopkins Applied Physics Laboratory (APL)Senior Wireless Reverse EngineerLaurel, MD$105,000–$290,000 / yearHave deep knowledge of digital communications, signal processing, software-defined radio receiver design, modulation/demodulation, synchronization, channel coding, statistical signal processing, or detection theory. Have extensive experience with reverse-engineering platforms such as Ghidra, IDA Pro, Binary Ninja, or similar tools and with reverse engineering embedded devices, communications firmware, or wireless protocols.