CNC MACHINIST (2nd SHIFT) Royell Manufacturing, Inc.CNC MACHINIST (2nd SHIFT)Everett, WA$21–$35 / hourCNC MACHINIST (2nd SHIFT) Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $21.00 - $35.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Mike Lacerda + Phone 425-259-9258 Ext 139 + Email mikel@royell.com Requirements + Job Requirement + Upload, download, and cycle NC programs effectively establishing "production rhythms" to produce the number of expected parts according to OEE goals.
CNC MACHINIST (EXPERIENCED) 1st SHIFT Royell Manufacturing, Inc.CNC MACHINIST (EXPERIENCED) 1st SHIFTEverett, WA$25–$30 / hourCNC MACHINIST (EXPERIENCED) 1st SHIFT Show All Jobs Apply Show Map + Location 3817 SMITH AVE, Everett, WA, 98201-4547, United States + Base Pay $25.00 - $30.00 / Hour + Employee Type Non-Exempt + Manage Others No Contact information + Name Bill Ward + Phone 425-259-9258 Ext 133 + Email BillW@royell.com Actively participate in the companiesSafety Committee, use provided Personnel Protective Equipment (PPE), operate equipment and use hand tools safely, and personally behave using manufacturing best practices.
CNC Machinist East End WeldingCNC MachinistKent, WashingtonIt is the responsibility of all employees to meet our customer's quality needs and to follow the quality policy and procedures as set forth in the Quality Procedure Manual. Position Summary: Machine quality parts from blueprints and work orders provided in a timely and accurate manner.
CNC Machinist - B and D Shift Blue Origin Enterprises LPCNC Machinist - B and D ShiftWA$39.34–$55.07 / hourand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Technician/Welder/CNC operator/Assembler Pride Technologies LLCManufacturing Technician/Welder/CNC operator/AssemblerSeattle, WA$25–$30 / hourTools like hand scraper, de-burning tools, larger equipment like Sand Blusters, media blusters, tumbler, working on the 3D printer and some lifting and operating jacks. Only applicable for San Francisco Candidates: Under the San Francisco Lactation in the Workplace Ordinance, we will provide written notice of lactation accommodation rights, and this notice will automatically be given upon hiring, any inquiry of parental leave or lactation accommodation.
CNC Machinist Trelleborg Sealing SolutionsCNC MachinistRenton, Washington$26–$30 / hourFounded in 1905, Trelleborg is an international organization operating within a multitude of industries including aerospace, automotive, medical, industrial, and food, water and beverage. During your workday you would run various parts, perform minor machine maintenance, clean and deburr parts to ensure quality parts.
CNC Machinist Level II HalmaCNC Machinist Level IIRedmond, WashingtonOur products are surgeon-designed and meticulously crafted to instill confidence and assurance in Cataract and Glaucoma procedures and include a wide range of surgical instruments such as forceps, scissors, hooks, spatulas, and knives, all designed for the delicate and intricate procedures required in microsurgery. Founded in 1976 and headquartered in Redmond, Washington, MicroSurgical Technology's passion is creating exceptional surgical devices and instruments used to restore or improve sight for patients all over the world.
CNC Machinist: 4th Shift Friday-Sunday 6:00am-6:30pm SKILLS INCCNC Machinist: 4th Shift Friday-Sunday 6:00am-6:30pmAuburn, WA$18–$38 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Skill in performing mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fraction and decimals).
CNC Machinist: 2nd Shift; Monday-Friday 3:30pm-12:00am SKILLS INCCNC Machinist: 2nd Shift; Monday-Friday 3:30pm-12:00amAuburn, WA$18–$38 / hourITAR - US PERSON STATUS Due to Skills Inc.s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Skill in performing mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fraction and decimals).
CNC Machinist: 1st Shift; Monday-Friday 7am-3:30pm SKILLS INCCNC Machinist: 1st Shift; Monday-Friday 7am-3:30pmAuburn, WA$18–$38 / hourDue to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed or shared by US Persons as defined by law. Skill in performing mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fraction and decimals).
CNC Mill Operator II Pioneer Human ServicesCNC Mill Operator IISeattle, WA$28.08–$35.10 / hourCompensation: New hires for this position typically start between $28.08 and $35.10 hourly, depending on factors such as work location, experience, qualifications, skills, competencies, internal equity, and market conditions. This is an exciting opportunity to be involved with an organization focused on a transformative path towards social change, creating pathways for rehabilitation, reintegration, and redemption.
CNC Operator II Pioneer Human ServicesCNC Operator IISeattle, WA$28.08–$35.10 / hourCompensation: New hires for this position typically start between $28.08 and $35.10 hourly, depending on factors such as work location, experience, qualifications, skills, competencies, internal equity, and market conditions. This is an exciting opportunity to be involved with an organization focused on a transformative path towards social change, creating pathways for rehabilitation, reintegration, and redemption.
CNC Machinist Starlink - 2nd Shift Space Exploration Technologies CorpCNC Machinist Starlink - 2nd ShiftRedmond, WA$23–$29 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. We've only begun to scratch the surface of Starlink's potential global impact and are looking for best-in-class CNC Machinists to help maximize Starlink's utility for communities and businesses around the globe.
__Production Supervisor - CNC - WA - March 2025 Keltia Design Inc__Production Supervisor - CNC - WA - March 2025Auburn, WAITAR (International Traffic in Arms Regulation) - US Person Status: Due to Clients' participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed, or shared by US Persons as defined by law. If interested, please send your updated resume in Word doc format to Varsha at varsha@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
CNC Machinist-Sept23 Keltia Design IncCNC Machinist-Sept23Tacoma, WARunning DMG Mori Machines From Horizontal to Vertical and Lathe 3. AUTHORITY: Determine product defects or out of tolerance condition, notify quality and/or supervisor to have product corrected or production stopped if defects exist. If interested, please send your updated resume in Word doc format to Varsha at varsha@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
CNC Machinist / Operator - Snohomish WA-July 2025 Keltia Design IncCNC Machinist / Operator - Snohomish WA-July 2025Snohomish, WAOur client in the Snohomish, WA area is a fast-growing contract manufacturer specializing in medical device implants and instruments who is looking for CNC Operators of various years of experience responsible for providing support for their Company. Position purpose/core responsibilities: The Operator will have exemplary manufacturing skills, working knowledge and experience on a variety of CNC machines and controls, and a dedication to being part of a world-class manufacturing team.
__CNC Machinist / Operators / Programmers-Jan 2024 Keltia Design Inc__CNC Machinist / Operators / Programmers-Jan 2024Everett, WAMonitors actual time taken to manufacture a product against the scheduled cycle time to manufacture a product and takes actions to ensure product is operating under set cycle time or meets scheduled cycle times. If interested, please send your updated resume in Word doc format to Varsha at varsha@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.
Sr. CNC Machinist/Lathe Operator Keltia Design IncSr. CNC Machinist/Lathe OperatorKent, WAThe ideal candidate will have 5+ years experience setting up and operating lathes and performs progressive machining operations on work involving very close tolerances. Job Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.
__CNC Machinist / Operator- WA- Dec 2024 Keltia Design Inc__CNC Machinist / Operator- WA- Dec 2024Snohomish, WAOur client in the Everett, WA area is a fast-growing contract manufacturer specializing in medical device implants and instruments who is looking for CNC Operators of various years of experience responsible for providing support for their Company. Position purpose/core responsibilities: The Operator will have exemplary manufacturing skills, working knowledge and experience on a variety of CNC machines and controls, and a dedication to being part of a world-class manufacturing team.
Senior Manufacturing Engineer, CNC Machining Amazon.com IncSenior Manufacturing Engineer, CNC MachiningSeattle, WAThis role requires deep experience with multi-axis CNC machining, fixturing, tooling, and process validation, along with the ability to think holistically-connecting machine selection, process architecture, and operational performance. Build and manage relationships with machine tool OEMs, tooling suppliers, and integration partners, leading technical evaluation, qualification, and deployment of solutions.