NewContracting HVAC Controls Technician Trane TechnologiesContracting HVAC Controls TechnicianPineville, NC$23.80–$43.85 / hourAdditional Requirements and Environmental Exposure: Must be able to safely and legally operate a vehicle using a seat belt Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties Must be able to twist the trunk of your body 90 degrees in each direction Must be able to squat and touch the floor with both hands Must be able to reach your hands over your head Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. or less Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location Annual Base Salary Range or Hourly Base Pay Range: $23.80 - $43.85 Compensation Type: Hourly Incentive Eligible: No Sales Commission Eligible: No Disclaimer: We strive to provide competitive compensation for this position, tailored to a variety of factors.
Principal Document Controls- Utility/ Energy - # 26-13357 US Tech Solutions, Inc.Principal Document Controls- Utility/ Energy - # 26-13357Charlotte, NC$65–$75 / hourDrive issue identification and resolution by reviewing project records (engineering packages, alignment sheets, pressure test packages, bill of material, material test records, etc.) tracking deficiencies, recommending solutions, and escalating issues as appropriate to maintain project schedule and quality objectives. Job Description: The Principal Maximum Allowable Operating Pressure Project Information Management Specialist (MAOP PIMS) is a key role responsible for leading project information management, document control, MAOP verification and deliverable management for large-scale infrastructure projects.
Document Control Lead ITACDocument Control LeadKings Mountain, NC$70,000–$100,000From humble beginnings to an ENR-Ranked Top Design Firm with a nationwide footprint and over 450 employees operating from 6 offices in Virginia, North Carolina and South Carolina, we provide Fortune 500 companies with innovative design-build solutions. Develop and maintain positive working relationships horizontally throughout the project team including Corporate Functional Leadership, Engineering, Procurement, Commissioning, vendors, and contractors.
NewCAD & Document Support Engineer - Automotive Drives SWJ TechnologyCAD & Document Support Engineer - Automotive DrivesCharlotte, NCA technology engineering firm is seeking a CAD & Document Support – Engineering professional to ensure the accuracy and traceability of CAD data across engineering documents. Located in Charlotte, NC, the position requires at least a bachelor's degree in a relevant field and a minimum of three years of experience, with proficiency in CAD systems.
Lockbox Processor / Document Scanner/ Opex Operator Veterans Sourcing GroupLockbox Processor / Document Scanner/ Opex OperatorCharlotte, NCPrevious experience in document processing, data entry, or machine operation preferred (not required; training provided). This role involves operating Falcon machines to scan and process work while ensuring accuracy and completeness.
NewQuality Assurance - Quality Control Engineer Turner ConstructionQuality Assurance - Quality Control EngineerCharlotte, NCReports to: Quality Assurance/Quality Control Manager, Project Manager or Project ExecutiveDevelop a comprehensive working knowledge and understanding of the contract documents (including Turner's contract, plans, specifications and applicable codes).Develop and execute the project-specific QA/QC Plan with scopes of work and work procedures. Develop engineering procedures, including document control, submissions management, creation and tracking of Request For Information (RFIs), material samples, documentation and tracking of potential cost changes, documentation and tracking of approved change orders, within budgetary guidelines.
Business Control Manager Bank of AmericaBusiness Control ManagerCharlotte, North CarolinaJob expectations include supporting the implementation of quality assurance and quality control processes within the LOB or ECF through ongoing monitoring and testing of controls, identifying issues and control improvements for remediation, and building out actions plans and milestones. We value the unique perspectives individuals bring from all backgrounds and career paths - whether shaped by military service, community college education, or a wide range of work and life experiences.
NewAutomation & Controls Solutions Account Manager ViziRecruiterAutomation & Controls Solutions Account ManagerCharlotte, NCRequirements High school diploma or GED.3 years of HVAC or controls services-related sales.5 years of building automation and control systemsexperience or vocational training. JOB SUMMARYThe ACS Account Manager is focused on new controls contract sales, customer relations, collection resolution, project management, and retrofit/upgrade project sales.
Records Management Business Control Mgr Bank of AmericaRecords Management Business Control MgrCharlotte, North CarolinaUS - CA - San Francisco - 315 Montgomery St - 315 Montgomery (CA5704), US - IL - Chicago - 110 N Wacker Dr - Bank Of America Tower Chicago (IL4110), US - MA - Boston - 100 Federal St - 100 Federal St Lp (MA5100), US - MA - Waltham - 1025 Main St - 1025 Main St - Waltham (MA6536), US - NJ - Pennington - 1500 American Blvd - Hopewell Bldg 5 (NJ2150), US - NY - New York - 114 W 47th St - 114 W 47th St - Ust (NY8114), US - VA - Richmond - 8007 VILLA PARK DR - VILLA PARK OPS CENTER BLDG A (VA2150). Job expectations include supporting the implementation of quality assurance and quality control processes within the LOB or ECF through ongoing monitoring and testing of controls, identifying issues and control improvements for remediation, and building out actions plans and milestones.
Senior Cost Control Manager - Data Center Construction Turner & Townsend LtdSenior Cost Control Manager - Data Center ConstructionRock Hill, SCThis role will have a strong emphasis on change management, cost control, and commercial governance, ensuring that all project changes are effectively evaluated, managed, and communicated throughout the construction lifecycle within a fast-paced, high-volume program environment. Turner & Townsend are looking for an experienced Senior Cost Control Manager to act as the key day-to-day client interface, delivering cost management services across a large-scale data center program.
Service Manager - Pest Control Butler PlusService Manager - Pest ControlCharlotte, North CarolinaRemoteActive structural pest control applicator credential in the assigned state — North Carolina Certified Applicator in Phase P (Household/General Pest) and Phase W (Wood-Destroying Organisms), issued by the NCDA & CS Structural Pest Control & Pesticides Division, and/or South Carolina Commercial Applicator License in Category 7A (Industrial, Institutional, Structural & Health-Related Pest Control), issued by the Clemson University Department of Pesticide Regulation . This role holds the state-required certified applicator credentials necessary to legally supervise unlicensed technicians and is directly responsible for the day-to-day management of service delivery, technician performance, documentation compliance, and customer satisfaction within an assigned branch or territory.
NewQuality Control Coordinator - HVAC MSS Solutions, LLCQuality Control Coordinator - HVACCharlotte, NCPhysical Demands: Constant sitting, walking short distances, bending, stooping, twisting, reaching above and/or below shoulder, handling/grasping documents or office equipment, clear speaking and adequate hearing sufficient to communicate effectively and respond appropriately in-person and/or on the telephone, vision sufficient to read source materials and computer screen data, repetitive motions for computer equipment use, lift 25 lbs. At MSS, we value our employees by providing a supportive culture with competitive compensation and a benefits package that continues to evolve based on our business’ growth and our employees' needs.
Project Manager – Transportation, Risk & Program Controls Resilience360 AdvisoryProject Manager – Transportation, Risk & Program ControlsCharlotte, NCThis role is for a Project Management Professional with demonstrable depth in risk management within highly complex transportation environments, ideally transit, light rail, BRT, or transit asset management programs. Develop and maintain program-level risk registers - identify, assess, and document key risks across transit programs in a centralized risk register, supporting proactive management and oversight.
Inventory Control Manager Marmon Holdings IncInventory Control ManagerCharlotte, NCThis position ensures inventory accuracy, material availability, efficient warehouse operations, and continuous improvement of inventory management processes while supporting production schedules and customer commitments. The Inventory Control Manager will lead initiatives to improve inventory control, warehouse organization, material flow, and operational efficiency while maintaining a safe, clean, and productive work environment.
Quality Control Inspector McCarl's Technical ServicesQuality Control InspectorCharlotte, NCFull timeThe Quality Control Inspector will play a critical role in overseeing the fabrication and field installation bycoordinating, conductingand recording examinations whileidentifying and resolving quality issues. Inspect welded joints of work in progress and/or completed units for; visible defects, correct dimensions, weld penetration, and conformance with client specifications.
SOX Controls Coach (Cyber GRC) - 3610604 Lighthouse Technology ServicesSOX Controls Coach (Cyber GRC) - 3610604Charlotte, NC$53–$63 / hourMUST HAVE a Cybersecurity GRC Background Previous experience working in a Cyber GRC role specifically managing SOX Compliance (not just general audit or compliance). Hands-On Design Experience Proven track record of designing controls from scratch, not just reviewing or auditing existing ones.
Project Controls Manager DPR Construction IncProject Controls ManagerNCIn addition, the project controls manager will have a client facing role, meeting regularly with the owners site based project managers and the owners project controls manager when he or she visits site for financial reviews. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets.
NewSite Quality Control-Mechanical AndritzSite Quality Control-MechanicalCharlotte, NCQualificationsA BS degree in engineering (preferably in mechanical, electrical or material science).A minimum of 2 years of experience in the hydropower industry or equivalent experience in an industrial construction environment. Alternative Qualification PathHigh School Diploma or GED.7+ years of experience in the hydropower industry preferred or an equivalent education and experience in an industrial construction or manufacturing environment.
Business Controls Lead City National BankBusiness Controls LeadCharlotte, North CarolinaRemote$99,000–$176,000 / yearFull timeProvides risk management expertise while working with operations managers and other 2nd line risk partners (to include Operational and Enterprise Risk Management teams, Regulatory Compliance, Business Continuity, IT Risk, Third Party Risk, Corp. Build, cooordinate, and lead monthly risk working groups to show thematic trends, themes, testing and audit updates, and business needs regarding risk program maturity in conjunction with key objectives.
Program Controls Specialist Stantec IncProgram Controls SpecialistCharlotte, NCIn the role, the individual will be able to apply technical skills in cost controls, schedule management, communications, and problem solving in a fast-paced, professional, design and construction environment under the guidance of lead program staff. Primary Location: United States | IL | Chicago Organization: 2249 Water-US PMCM-Chicago IL Employee Status: Regular Business Justification: New Position Travel: Yes Schedule: Full time Job Posting: 19/06/2026 04:06:53 Req ID: 1006293.
Controls BAS System Specialist (Relocation assistance provided) MSS Solutions, LLCControls BAS System Specialist (Relocation assistance provided)Charlotte, NCWork Environment: Exposure to weather, extreme heat or cold, high noise intensity level, atmospheric conditions, exposure to electrical shock, exposure to toxic or caustic chemicals, wet and/or humid, vibration, proximity to moving mechanical parts, working high exposure places. As a result of our phenomenal growth, MSS Solutions, LLC has an opening for a Controls BAS System Specialist If you are an experienced professional who is looking to grow your career and contribute fresh and innovative ideas to serve our customers, this is an opportunity you should explore!
BAS Controls Service Technician (Relocation assistance provided) MSS Solutions, LLCBAS Controls Service Technician (Relocation assistance provided)Charlotte, NCWork Environment: Exposure to weather, extreme heat or cold, high noise intensity level, atmospheric conditions, exposure to electrical shock, exposure to toxic or caustic chemicals, wet and/or humid, vibration, proximity to moving mechanical parts, working high exposure places. Effectively documents work performed by completing necessary paperwork on each job to include: entering daily time, detailing scope of service progression, and maintaining an electronic database.
Centralized Governance & Control Specialist-Remediation Quality Assurance Testing The Toronto-Dominion BankCentralized Governance & Control Specialist-Remediation Quality Assurance TestingCharlotte, NC$91,000–$136,240 / yearJob Description: The Centralized Governance & Control - Remediation Quality Assurance Testing team performs in-flight Assurance Testing Activities throughout the Issue Remediation Lifecycle to ensure Management Action Plans (MAPs) are designed to sufficiently mitigate and manage risk drivers of the issues and operate effectively. Total Rewards at TD includes base salary and variable compensation/incentive awards (e.g., eligibility for cash and/or equity incentive awards, generally through participation in an incentive plan) and several other key plans such as health and well-being benefits, savings and retirement programs, paid time off (including Vacation PTO, Flex PTO, and Holiday PTO), banking benefits and discounts, career development, and reward and recognition.
NewWater Business Group Project Controls Business Class Lead HDRWater Business Group Project Controls Business Class LeadCharlotte, NC$116,000–$231,000 / yearExperience in the understanding of AACEi, PMI, and PMBOK Industry Best PracticesRequired QualificationsBachelor's degreeA minimum of 10 years' experience in project controls work on engineering and construction projects, including planning, estimating, forecasting, scheduling, cost control, schedule control, and project reportsAbility to manage proposal preparation, contract review and negotiation, client relationship and win strategy for medium to large EPC ProjectsStrong decision-making skillsStrong interpersonal and leadership skillsAbility to coordinate and prioritize multiple long- and short-term tasks simultaneouslyStrong organizational, analytical and problem-solving abilitiesStrong oral and written communication skillsAn attitude and commitment to being an active participant of our employee-owned culture is a mustSponsorship (visa) for US employment authorization is not available now or in the future for this positionWhat We BelieveHDR is our company. Primary ResponsibilitiesAs the Water Business Class Lead, we will count on you to provide regular coordination across the business group with project controls personnel, project managers, project staff, Geographic Operations Leadership, Regional Directors of Operations and Business Group Professional Services Directors to drive the following:Implementation of continuous improvement and quality into the project controls practice in alignment with the Quality Management SystemAssume leadership responsibilities to introduce effective and efficient project controls approach and technologies in projects across market sectors in the Water Business Group.
Quality Control Manager Dixon Valve & Coupling CoQuality Control ManagerNCThis is a high-visibility leadership role for a quality professional who wants to make a lasting impact-developing people, strengthening systems, and shaping the future of quality at the site. What Were Looking For: Experience: 7+ years of progressive experience in manufacturing quality, including leadership responsibility in a quality, engineering, or operations role.
Senior Compliance Manager - Control Testing & GRC Oversight CBRE Group IncSenior Compliance Manager - Control Testing & GRC OversightCharlotte, NCCBRE serves clients through four business segments: Advisory (leasing, sales, debt origination, mortgage serving, valuations); Building Operations & Experience (facilities management, property management, flex space & experience); Project Management (program management, project management, cost consulting); Real Estate Investments (investment management, development). Charlotte - North Carolina - United States of America, Chicago - Illinois - United States of America, Dallas - Texas - United States of America, Fayetteville - Arkansas - United States of America, Tulsa - Oklahoma - United States of America.
Controls Technician MCI - Mechanical Contractors LLCControls TechnicianCharlotte, NC$25–$45Academic Credentials, Certifications, Licenses: BS Degree in engineering technology, or Diploma or certificate from a two-year community college, or technical school, or 5 years of experience in BAS controls systems. MCI seeks a Building Automation System (BAS) C ontrols Technician to install, program, and service, digital control systems while maintaining quality, profitability, and customer satisfaction.
Quality Control Lab Technician Bionique Testing Laboratories LLCQuality Control Lab TechnicianConcord, North CarolinaThe QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.
Senior Engineer, Project Controls Holder ConstructionSenior Engineer, Project ControlsMooresville, North CarolinaSupport development of workflows for RFIs, Submittals, Material Status, Design Management, Risk Management, Quality, and Closeout. Holder Construction is a nationally recognized leader in the construction industry, consistently ranked among the top firms on ENR’s Top 400 Contractors list.
Inventory Control Manager Marmon HoldingsInventory Control ManagerCharlotte, North CarolinaThis position ensures inventory accuracy, material availability, efficient warehouse operations, and continuous improvement of inventory management processes while supporting production schedules and customer commitments. The Inventory Control Manager will lead initiatives to improve inventory control, warehouse organization, material flow, and operational efficiency while maintaining a safe, clean, and productive work environment.
Quality Control Lab Technician Asahi Kasei Semiconductor, Inc.Quality Control Lab TechnicianCharlotte, North CarolinaThe QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.
P & C Designer (Protection and Controls) GFT Infrastructure IncP & C Designer (Protection and Controls)Charlotte, NCRemote$70,000–$90,000 / yearIn this capacity, the successful candidate will be responsible for the following: Design and execution of high-voltage substations projects in the 4kV - 765kV range with an emphasis on project safety, cost, quality, and reliability. Our team excels in providing solutions for power transmission, distribution, and renewable energy, utilizing advanced technologies and creative problem-solving to meet today's diverse energy needs.
Quality Control Inspector IES Holdings IncQuality Control InspectorRock Hill, SCTitle: Quality Control Inspector Department: Quality Location: Rock Hill, SC (On-Site) Role Type: Full-Time, Hourly Reports To: Quality Supervisor Direction From: Quality Manager Shift: 2nd Position Summary The Quality Control Inspector is responsible for ensuring products meet all engineering, regulatory, and customer requirements. As of the end of IES's 2025 fiscal year ending September 30, 2025, IES produced over $3.3 billion in revenue and employed over 10,200 employees at over 174 domestic locations across the United States.
Senior Operations Control Specialist Bank of AmericaSenior Operations Control SpecialistCharlotte, North CarolinaKey responsibilities include understanding and anticipating inherent risks to the business, applying knowledge by conducting research and analysis in multiple applications to solve complex problems and escalation inquiries, documenting procedure changes, providing guidance to employees, and effectively communicating information and data across the Line of Business. Executes against regulatory, BSA/anti-money laundering, and economic sanctions compliance practices relevant to the specialists specific area of responsibility with sufficient expertise and or experience to require some direction, but little day-to-day guidance from the specialist's manager.
Quality Control Lab Technician Asahi Kasei Battery Separator Canada CorporationQuality Control Lab TechnicianCharlotte, North CarolinaThe QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.
Electrical Quality Control Inspector M.C. Dean, IncElectrical Quality Control InspectorRock Hill , South CarolinaFull timePerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
Consumer & Small Business Products Business Control Manager Bank of AmericaConsumer & Small Business Products Business Control ManagerCharlotte, North CarolinaJob expectations include supporting the implementation of quality assurance and quality control processes within the LOB or ECF through ongoing monitoring and testing of controls, identifying issues and control improvements for remediation, and building out actions plans and milestones. We value the unique perspectives individuals bring from all backgrounds and career paths - whether shaped by military service, community college education, or a wide range of work and life experiences.
Quality Control Associate Evergreen SyscoQuality Control Associate EvergreenCharlotte, NCCommunicate with Inventory Control Manager or Compliance Manager and buyers all quality issues and assists them in resolving them to ensure the customer receives the highest quality products possible. Most important decisions made with review and approval of other individuals or supervisors (include the reviews/approvals required): Shrink issues.
NewQuality Assurance/Quality Control (QA/QC) Technician– Facilities Support Services LAUKOAQuality Assurance/Quality Control (QA/QC) Technician– Facilities Support ServicesCharlotte, NCAs DAWSON’s QA Technician, you assist the DAWSON QA/QC Manager oversee quality assurance and quality control for all facilities support services, including maintenance, janitorial, groundskeeping, and environmental functions. Shall possess at least two (2) years of recent experience in quality assurance or performance evaluation for federal support services contracts, including experience with facility maintenance, janitorial, or base operations support.
Senior Analyst, IT Internal Controls & SOX Compliance Circle Internet Financial LLCSenior Analyst, IT Internal Controls & SOX ComplianceCharlotte, NCRemote$112,500–$147,500 / yearCircle's platform includes the world's largest regulated stablecoin network anchored by USDC, Circle Payments Network for global money movement, and Arc, an enterprise-grade blockchain designed to become the Economic OS for the internet. The Senior Analyst will partner closely with Engineering, Security, Finance, Compliance, and business stakeholders to ensure controls are effectively designed, documented, tested, and monitored to support regulatory and financial reporting requirements.
RISK AND CONTROLS MANAGER (HYBRID) Compass Group North AmericaRISK AND CONTROLS MANAGER (HYBRID)CHARLOTTE, NCFor positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information: https://www.compass-usa.com/wp-content/uploads/2023/08/2023_WageTransparency_CorpAndFoodbuy.pdf. • Minimum 5 years of experience in financial controls, internal audits, SOX audits, risk and controls assessment, risk assurance, preferably in a Big-4 firm or Fortune 500 organization.
NewControl Panel Technician SunSourceControl Panel TechnicianMatthews, NCCarotek represents over 85 manufacturers as their process equipment distributor, representative, and repair center for pumps, blowers, heat exchangers, valves, instrumentation, IIoT, steam, hydronics and municipal products. Carotek, a SunSource company, provides process equipment solutions for the industrial, commercial and municipal markets in North Carolina, South Carolina, Tennessee, Georgia and Virginia.
Quality Control Lab Technician Asahi Kasei Advance AmericaQuality Control Lab TechnicianConcord, North CarolinaThe QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.
Quality Control Lab Technician Bionique ScientificQuality Control Lab TechnicianCharlotte, North CarolinaThe QC Technician will support the plant in aligning Celgard systems and processes to the automotive requirements; specifically in the product quality testing lab, and will assist the quality team in maintaining and performing other quality-related duties in the manufacturing area that directly support the on-going success of the value stream. Reporting to the Quality Supervisor, the Quality Control Technician serves as part of a team responsible for performing all duties associated with product quality testing in a plastic separator manufacturing facility, and is responsible for maintaining the safe and secure operation of the quality lab on his/her shift.
Controls Technician AIR Control ConceptsControls TechnicianCharlotte, NCFull timeComputer Skills- To perform this job successfully, an individual should be proficient in personal computer skills including electronic mail, record keeping, routine database activity, word processing, spreadsheet, etc. This partnership allows us to provide even greater value to our customers by combining our trusted local expertise with the broad support, resources, and innovation of a larger organization.
Controls Technician Apprentice-PLC Hoffman Mechanical Solutions IncControls Technician Apprentice-PLCCharlotte, NCKey Responsibilities: Install, terminate, and test electrical wiring, control panels, and instrumentation for HVAC and industrial process systems. Job Summary: We are seeking a Controls Technician Apprentice to join our team, specializing in HVAC and industrial process systems.
NewAutomation & Controls Account Manager ViziRecruiterAutomation & Controls Account ManagerCharlotte, NCMust have basic experience in Windows or macOS environments, working knowledge of word processing, spreadsheets, e‑mail, Web‑enabled applications, and database softwarePREFERRED REQUIREMENTSControls service experienceBachelor's DegreeSales and presentation experienceKnowledge, Skills, and AbilitiesMust have experience in Windows or MacOS environments, including a working knowledge of spreadsheets, e‑mail, and Web‑enabled applications. OverviewThe ACS Account Manager is focused on new controls contract sales, customer relations, collection resolution, project management, and retrofit/upgrade project sales.
Engineer, Instrumentation & Controls Aecon Group IncEngineer, Instrumentation & ControlsCharlotte, NCCandidate must complete complex engineering assignments including preparation of packages that include specifications and data sheets, calculations, and modifications to existing plant drawings; provide support to proposals, prepare purchase requisitions; review vendor drawings and develop cost and budget estimates and schedules and scope of work documents. Are committed to supporting and investing in inclusive work environments, through initiatives like Diversity, Equity, Inclusion, & Accessibility training, our Aecon Women in Trades and Aecon Diversity in Trades programs, and our Employee Resource Groups (ERGs) to ensure we are building inclusion into every aspect of our culture at Aecon.
Quality Control Analyst Glenmark Pharmaceuticals Inc.Quality Control AnalystMonroe, NCGlenmark Pharmaceuticals Inc., USA is a subsidiary of Glenmark Pharmaceuticals Ltd., a leading player in the discovery of new molecules – both New Chemical Entities (NCE's) and New Biological Entities (NBEs'), with eight molecules in various stages of clinical development. Knowledge and Skills : Knowledge of cGMP, Validations and Qualifications, regulatory guidelines, US Pharmacopoeias, Internal auditing, Handling of regulatory Inspections, well acquainted with QMS, well versed with Change control/deviations and market compliant management system.
Principal Project Controls - Cost Westinghouse Electric Co LLCPrincipal Project Controls - CostRock Hill, SCRemoteQualifications: • Bachelors degree in a relevant field (e.g., Engineering, Finance, Data Science) or equivalent experience • 8+ years experience in project management, project controls, or cost engineering • Familiarity with project controls systems such as Primavera P6 and EVMS platforms • Experience working with large datasets and integrating data across systems • Write code (e.g., Python, VBA, and SQL) • Develop structured, scalable work processes • Experience with modern data tools (e.g., Power BI, SharePoint integration) is desirable • Advanced proficiency in Excel, including modeling, pivot tables, and complex formulas. • Work with teams including project managers, estimators, schedulers, risk analysts, technical leads, and financial analysts to maintain an updated and risk-informed financial picture of projects and provide insights.