NewTest Specialist - Multiple Shifts (Components) Space Exploration TechnologiesTest Specialist - Multiple Shifts (Components)Hawthorne, CA$33–$39 / hourThe components test operations group designs, builds, operates and maintains custom test stands and test fixtures for valves, regulators, and actuators that must perform in extreme environments, with temperatures ranging from +900F to -400F and pressures beyond 10,000 psig. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewBuild Reliability Engineer (Falcon/Dragon) Space Exploration TechnologiesBuild Reliability Engineer (Falcon/Dragon)Hawthorne, CA$100,000–$117,500 / yearConduct regular build quality reviews to ensure that design intent is achieved and well-communicated; identify opportunities for risk reduction and removal of complexity in designs and processes to improve manufacturability, collaborating with integrated product teams to drive improvements and address high-impact and repeating non-conformances. RESPONSIBILITIES: Partner with design engineering and manufacturing teams through product development and production to create quality plans for flight hardware, including identification of key characteristics, prototype testing for functionality and manufacturability, first article and detailed inspection planning, and consideration of past failures and lessons learned.
Supplier Development Engineer, Mechanical (Falcon & Dragon) Space Exploration TechnologiesSupplier Development Engineer, Mechanical (Falcon & Dragon)Hawthorne, CA$100,000–$117,500 / yearOwn the new product introduction of new parts and assemblies on the rocket, including determining the ideal manufacturing method, identifying and reviewing suppliers, and developing a reliable process for ramping to rate for parts that are new, undergoing drawing changes, or undergoing re-sourcing at a new supplier. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewPropulsion Engineer (Raptor Final Assembly & Tube Shop) Space Exploration TechnologiesPropulsion Engineer (Raptor Final Assembly & Tube Shop)Hawthorne, CA$100,000–$115,000 / yearThink creatively; question the status quo; challenge engineering and manufacturing requirements to drive efficient production of Raptor engines on schedule through collaboration with a multidisciplinary team of engineers (design, build, and reliability), internal production teams, and external vendors. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewSupplier Development Engineer, Manufacturing (Falcon & Dragon) Space Exploration TechnologiesSupplier Development Engineer, Manufacturing (Falcon & Dragon)Hawthorne, CA$100,000–$117,500 / yearOwn the new product introduction of new parts and assemblies on the rocket, including determining the ideal manufacturing method, identifying and reviewing suppliers, and developing a reliable process for ramping to rate for parts that are new, undergoing drawing changes, or undergoing re-sourcing at a new supplier. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
DFM Project Engineer XometryDFM Project EngineerLos Angeles, CA$65,000–$85,000 / yearAdditionally, you will take on special projects related to expanding the capabilities of our manufacturing partner network, working with OEM equipment makers, and our internal team of experts to improve our core competencies. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity.
Customer Success Data Scientist Cloud Software Group IncCustomer Success Data ScientistCA$128,080–$192,120 / yearNY generally ranges: $128,080-$192,120 CA generally ranges: $146,011-$219,017 All other locations fall under our General State range: $128,080-$192,120 Benefits may vary depending on the nature of your employment with Cloud Software Group and the country where you work. Cross-functional Collaboration - Collaborate with sales, support, product management, and engineering to align and support strategy, improve customer outcomes, help resolve escalations, find sales opportunities, and provide product roadmap input.
NewSr. Propulsion Design Engineer (Raptor Engine Systems) Space Exploration TechnologiesSr. Propulsion Design Engineer (Raptor Engine Systems)Hawthorne, CA$135,000–$190,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You will maintain and improve department-wide design documentation (including DCRs, PDRs, CDRs), drive corrective actions on deficiencies, and uphold best practices in design, development, and production.
NewManufacturing Engineer (Falcon & Dragon) Space Exploration TechnologiesManufacturing Engineer (Falcon & Dragon)Hawthorne, CA$100,000–$117,500 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You will work on launch vehicles and spacecraft that deliver satellites into Earth's orbit, ferry humans to and from the International Space Station, and ultimately extend humanity's reach beyond the Earth and moon.
Machinist AMETEK IncMachinistIrvine, CAJob Description: Position Summary: This role is a skilled role responsible for setting up and running CNC equipment to machine or fabricate a variety of precision components to specifications by following drawings, work instructions and in-process inspection requirements. Measure and inspect part features per drawing to ensure conformance and detect defects using precision instruments using basic gaging and inspection tools (i.e. Dial Calipers, Gage Pins, Micrometers).
ASSOCIATE PROCESS SAFETY ENGINEER State Of CaliforniaASSOCIATE PROCESS SAFETY ENGINEERLos Angeles, CA$3.50–$8 / hourUnder the general direction of the Senior Process Safety Engineer (Supervisor) (SPSE), the Associate Process Safety Engineer (APSE) performs process safety, mechanical, petroleum, and facility engineering work to ensure the safe operation of state lease oil and gas facilities including offshore platforms. This position may be eligible for hybrid telework under Government Code 14200 for eligible applicants residing in California, subject to the candidate meeting telework eligibility criteria set forth in the State Lands Commission policy and/or future program need.
NewSr Thermal Analysis Engineer - Honeybee Robotics Space Exploration Systems Blue OriginSr Thermal Analysis Engineer - Honeybee Robotics Space Exploration SystemsAltadena, California$145,188–$203,263.20 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Intern/Co-op – Geotechnical Engineering (Fall 2026) Langan Engineering & Environmental ServicesIntern/Co-op – Geotechnical Engineering (Fall 2026)Irvine, CaliforniaA student actively pursuing a 4-year or advanced degree in Civil or Geotechnical Engineering; Geotechnical coursework preferred; A cumulative GPA of 3.0 or greater is preferred; Working knowledge of AutoCAD and Microsoft Office Suite applications; Excellent written and verbal communication skills; Strong attention to detail with excellent analytical, multitasking, and judgment capabilities; Ability to effectively work independently and in a team environment; and. Employees thrive at Langan, a firm that fosters an inclusive and supportive work environment for all; prioritizes wellbeing, health, and safety; encourages volunteerism and philanthropy; offers workplace flexibility, along with carbon-neutral office spaces; and empowers individuals to contribute their skills and knowledge to make impactful contributions.
Senior Staff Geotechnical Engineer Langan Engineering & Environmental ServicesSenior Staff Geotechnical EngineerIrvine, California$76,000–$110,000 / yearBachelor's degree in Civil or Geotechnical Engineering required, Master's degree in Geotechnical Engineering strongly preferred; 3+ years of related geotechnical experience in geotechnical investigations and construction inspections; FE/EIT certification preferred; Office experience with investigation and field work coordination, geotechnical reports, and specification writing; Prior field experience in earthwork, driven and drilled pile construction, load testing, footings subgrade and backfill inspection, ground improvements, retaining wall design and construction, and excavation support system design and inspection; Desired software knowledge: gINT, Slide/SLOPE/W, PLAXIS, LPILE, GRLWEAP, MSEW, SHAKE; Excellent written and verbal communication skills; Strong attention to detail with excellent analytical, multitasking, and judgment capabilities; Ability to effectively work independently and in a team environment; Ability to perform field work as required; and. Employees thrive at Langan, a firm that fosters an inclusive and supportive work environment for all; prioritizes wellbeing, health, and safety; encourages volunteerism and philanthropy; offers workplace flexibility, along with carbon-neutral office spaces; and empowers individuals to contribute their skills and knowledge to make impactful contributions.
NewMachinist Senior BelcanMachinist SeniorIrvine, CA$31–$35 / hourOperates hand and power tools to deburr precision and complex machine parts in accordance with semicomplicated engineering blueprints and route sheets to close tolerances. Wire EDM Responsibilities: Programming & Setup · Create, modify, and optimize Wire EDM programs (at the machine and/or offline software) based on prints, G1/G2/G3 geometry programs.
Machining Tech I, Mechanical Assembly (1st Shift) Howmet Aerospace IncMachining Tech I, Mechanical Assembly (1st Shift)Carson, CA$20–$23.80 / hourOur products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools.
2nd Shift - Machining Tech III, Threadroll Howmet Aerospace Inc2nd Shift - Machining Tech III, ThreadrollCarson, CA$19.48–$29.19 / hourThe Company's primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report.
Principal Thermal Analysis Engineer - Space Exploration Systems Blue Origin Enterprises LPPrincipal Thermal Analysis Engineer - Space Exploration SystemsLos Angeles, CA$169,624–$237,473.25 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Machining Tech II, Threadroll Howmet Aerospace IncMachining Tech II, ThreadrollCarson, CA$22–$28.47 / hourOur products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools.
Manufacturing Engineer - Mechanical Oligo SpaceManufacturing Engineer - MechanicalHawthorne, CaliforniaLeveraging cutting edge AI-driven generative design and automated manufacturing , our ex-MIT, Harvard, and NASA JPL team work to create the most advanced payload-specific spacecraft at scale in weeks over months. With world‑class advisors on our board, and fresh funding from top investors like Lux Capital , we’re always on the lookout for exceptional builders, fast learners, and ambitious engineers.