NA Power Supply EV Program & Unit Applications Supervisor Ford Motor CoNA Power Supply EV Program & Unit Applications SupervisorDearborn, MI$115,500–$218,100 / yearProblem Solving & Continuous Improvement: Proactively identify and address complex issues related to packaging & electrical design; leading root cause analysis, defining effective corrective actions, and overseeing their implementation. Team & Technical Leadership: Guide and mentor a team of engineers through the implementation of low-voltage power supply module hardware, from initial architecture design to final implementation/Launch in vehicles.
Project Engineer NiowaveProject EngineerLansing, MichiganUnderstands how to integrate into a new team/organization – appreciates the history of current state, knows how and when to make suggestions, as well as using just the right pace to reach the improved future state. Project Engineer Who we are… We are a group of scientists, engineers, designers, technicians, and many others who are dedicated to changing the world by developing medical isotopes to treat and eradicate cancer.
Jr Controls Engineer on-site USA GFX Solutions CareerJr Controls Engineer on-siteWestland, MichiganThis role collaborates with Robotics, Process engineering groups and other team members to design controls systems to project specifications while mentoring and training entry level PLC Specialists. Produce and maintain project drawings and documents including, electrical and controls schematics, control panel layout, PLC I/O layout, operation and maintenance manuals.
High Performance Compute (HPC) Software Engineer – HPC SW Systems KLAHigh Performance Compute (HPC) Software Engineer – HPC SW SystemsAnn Arbor, MichiganDesign, develop, and optimize HPC software running on large-scale Linux clusters, including distributed and parallel workloads (MPI, multithreading, GPU-accelerated pipelines, containerized workloads). Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years.
Controls Engineer (CMMS) Henpen CorporationControls Engineer (CMMS)Detroit, MichiganProficiency with Allen-Bradley ControlLogix PLCs, PowerFlex drives, and HMI platforms (e.g., PanelView, Wonderware, Ignition). • Knowledge in the installation, basic maintenance, or operation of mine ventilation and materials processing/handling systems and/or mine shaft maintenance.
High Performance Computing Hardware / Systems Engineer KLAHigh Performance Computing Hardware / Systems EngineerAnn Arbor, MichiganDoctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years. Evaluate and select HPC components (CPUs, GPUs, memory, NICs, storage, PCIe cards) based on performance, reliability, and cost.
CNC Software Engineer Integrity Staffing GroupCNC Software EngineerSterling Heights, Michigan$35–$55 / hourExperience collaborating with mechanical/electrical engineering teams to integrate and refine CNC machine performance- knowledge of machine centers, cell controllers and transfer machines. These are exciting opportunities for Software Engineers with solid CNC software design experience looking for an opportunity with minimal travel, good work/home life balance, and excellent growth and development opportunities.
Design Release Engineer HireTalentDesign Release EngineerAuburn Hills, MIDepending on program assignments, engineer may be required to support sourcing activities and/or once a supplier is sourced, coordinate and track supplier progress to ensure part maturity and milestones are met and aligned to best practice designs and methodologies including Design Failure Mode and Effects Analysis (DFMEA) and Design Validation Plans (DVP&R) to minimize risk. Components include various types of low-pressure clean and dirty side ducts, air cleaners, make-up air hoses, and other related items including resonators, air filters, and brackets.
Regulatory & Homologation Engineer Artech LLCRegulatory & Homologation EngineerAllen Park, MIIn this position, you will be identifying safety regulatory and homologation requirements for vehicles and working with Product Development engineers to ensure vehicle compliance demonstration in support of program timing milestones throughout the development cycle, product launch phase, ongoing change management, and field evaluations. Track compliance documentation submissions and homologation progress and provide the vehicle program team with a risk assessment at appropriate major program milestones and reviews.
Computer AI Engineer Howmet AerospaceComputer AI EngineerWhitehall, MIFollow: LinkedIn , Twitter , Instagram , Facebook , and YouTube . To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report .
Project Engineer Optimal Inc.Project EngineerWarren, MIFull timeProject Engineers: Develop and optimize a deep learning-based defect detection system for electrode defects using the YOLO algorithm, integrating attention mechanisms and additional detection layers for high-precision on tiny defect detection. Build GUI-based visualization software via PyQt for interactive defect analysis, supporting ROI (region of interest) marking, dynamic scaling, defect result display and automated quality analysis reports generation.
NewCalibration Engineer - Electrification Battery Systems General Motors CoCalibration Engineer - Electrification Battery SystemsMilford, MIFour (4) years of experience with the following: Embedded Controls; Tools commonly used in calibration including INCA, Vehicle Spy, CRETA, MDA, Matlab, and Simulink; Hardware and Software-in-the-Loop Systems; and Vehicle Control System Integration and Debugging. REQUIREMENTS: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field of study and Four (4) years of experience as a Calibration Engineer, Mechanical Engineer, or related role.
NewVehicle Systems Engineer General Motors CoVehicle Systems EngineerWarren, MIOne (1) year of experience in the following: Issue identification, support and resolution; In vehicle test setup and configuration for OTA execution; Retrieval and analysis of CGM/TCP/CAN logs; Operational process requirement including Back Office processes for connected vehicle services; Make issues and OTA impacts to specific modules and features; and Problem-solving skills to triage and resolve ambiguity issues that frequently surface during Over-The-Air update. REQUIREMENTS: Bachelor's degree in Electrical Engineering, Electronics Engineering, Computer Science, or related field of study and two (2) years of experience as a Senior Software Engineer, Software Engineer, or related occupation.
Software Engineer - New Grad (December 2026) Applied Intuition IncSoftware Engineer - New Grad (December 2026)Ann Arbor, MIApplied Intuition is headquartered in Sunnyvale, California, with offices in Washington, D.C. San Diego; Ft. Walton Beach, Florida; Ann Arbor, Michigan; London; Stuttgart; Munich; Stockholm; Bangalore; Seoul; and Tokyo. Nice to have: Working knowledge of frontend, API layer, database ORM, containerization, or cluster orchestration frameworks (such as React, GraphQL, SQLAlchemy, Docker, or Kubernetes).
Senior Software Engineer - Software Integration Manager General Motors CoSenior Software Engineer - Software Integration ManagerMilford, MIFive (5) years of experience with the following: Software integration, CI, CD, and DevOps; Tooling, infrastructure solutions and automated testing; Project management; Programming using C, C++, and Assembly; Scripting languages including Perl and Python; Operating systems including Unix, Linux, and RTOS for embedded system; Instrumentation including INCA, in circuit emulators, dSpace; and Configuration management system including Git and build tools using Jenkins and eflow. REQUIREMENTS: Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, Software Engineering, Mechanical Engineering, or related field of study and Five (5) years of experience as an Integration Engineer, Software Engineer, Controls Engineer, or related role.
Senior Hardware Engineer: Connectivity Modules General Motors CoSenior Hardware Engineer: Connectivity ModulesWarren, MI$135,000–$209,000 / yearBenefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more. The ideal candidate has strong experience in hardware architecture, system bring-up, and cross-functional integration of complex embedded systems combining high-performance compute and wireless connectivity.
Diagnostics & Data Systems Engineer Ford Motor CoDiagnostics & Data Systems EngineerDearborn, MI$109,453.80–$169,530.72 / yearPerform meticulous analysis of vehicle Controller Area Network (CAN) communication logs to diagnose and isolate the source of complex behavioral faults and performance anomalies, informing the continuous improvement and refinement of the automated diagnostic algorithms. Engineer and manage complex algorithms designed to automatically analyze vehicle data streams, critical for the advanced identification, prediction, and root cause analysis of systemic issues within the vehicle''s integrated electronic and software systems.
Virtual Validation Engineer Ford Motor CoVirtual Validation EngineerDearborn, MI$99,600–$166,600 / yearThe engineer in this role will develop and maintain electronic control unit (ECU) simulations at multiple abstraction levels (Level 4 target-native hardware emulation and Level 3 host-native simulations). 3+ years of experience in developing simulation or virtualization frameworks, or equivalent experience in system programming (e.g., embedded systems, RTOS, hardware controllers, etc).
Process Controls Engineer General Motors CoProcess Controls EngineerWarren, MIRequires five (5) years of experience with the following: Electrical and control systems; Mechanical concepts involving machine designs, process requirements involved in the manufacturing process; PLC and HMI programming, Ethernet and/or Devicenet networks; Servo motors, motion control and drives; Fanuc robots setup and programming; Design and trouble shoot electrical controls systems; and Siemens or Allen-Bradley. Conduct machinery acceptance run-off and process statistical process control during the procurement of automation equipment and machinery including computer numerically controlled devices, industrial robotics, human-machine interfaces, motion sensing devices, programmable logic controllers, and vision systems.
NewSwaaP Controls Engineer (PP) Nexteer Automotive Group LtdSwaaP Controls Engineer (PP)Auburn Hills, MIExperience must include: Experience with, gained through either employment or schooling: Signal Analysis, such as Frequency Analysis & Fourier Transforms, in Control Systems; Stability Analysis in Control Systems; Vehicle Chassis Design & Dynamics (CarSim); Automotive Powertrain Design; Computer Vision; Hybrid Electric Powertrain Theory; MATLAB & Simulink Software; Path Planning Algorithms; Automotive System Integration of Mechanical, Electrical, Electronic, and Software components; Algorithm Deployment to Embedded Systems; Simulation Programs to Test Algorithms, Model Sensors, and Create Physics-Based Interactions. MINIMUM REQUIREMENTS: Masters Degree (or foreign academic equivalent) in Mechanical Engineering, Electrical Engineering, or Automotive Systems, or a related field.