Electrical Engineer Elite Recruiting CoElectrical EngineerDayton, OHAs a member of the Defense Customer Engagement Team, the Electrical Engineer II supports program milestones and deliverable timelines, with periodic client-facing interaction to help project teams meet schedules and deliver effective, compliant engineering solutions. Support the development and refinement of 3D Technical Data Packages (3D TDPs) with a cross- functional engineering team to aid part procurement, manufacturing, and reverse engineering activities for aerospace and defense programs.
NewElectrical Designer AMG Inc.Electrical DesignerDayton, OHOur E&I department is responsible for working cohesively with our cross-disciplinary team of engineers to support industrial, manufacturing and chemical process plants with greenfield, brownfield, retro-fits, upgrades, automation integration, install and programming support, and consulting on niche engineering design solutions. You will design electrical systems including power distribution, controls systems, lighting for industrial environments, and helping bring ideas to life by developing electrical drawings for a wide variety of industrial facilities and process plants.
NewPosition, Navigation, and Timing (PNT) Engineering Support F-16 WAM (Top-Secret) CredencePosition, Navigation, and Timing (PNT) Engineering Support F-16 WAM (Top-Secret)Wright-Patterson Air Force Base, OHSupport engineering and technical requirements derivation, design, development, integration, verification, qualification for airworthiness certification, and fielding of F-16 PNT systems, including Inertial Navigation Systems (INS), transponders, Global Positioning System (GPS), and other forms of alternate PNT as defined in, or derived from, program requirements. Credence has an immediate opening for an Position, Navigation, and Timing (PNT) Engineering Support at the senior level who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at Wright Patterson AFB, OH.
NewElectrical Controls Engineer ActalentElectrical Controls EngineerHamilton, OH$38–$48 / hourWe are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. Work typically involves office-based design activities using tools such as AutoCAD and AutoCAD Electrical, along with hands-on testing and troubleshooting of control systems in-house and occasionally in the field.
NewSr. Construction Manager, MLZ Data Center Construction Amazon Data Services, Inc.Sr. Construction Manager, MLZ Data Center ConstructionNew Carlisle, OHBachelor’s degree in Mechanical Engineering, Electrical Engineering, Construction Management, or an equivalent engineering science plus 7+ years of relevant construction experience, OR 11+ years of relevant construction experience in lieu of a degree. • Work alongside partner teams such as Operations, Networking, Controls, Security, and Commissioning to build Data Centers that directly support our Customers.
NewEngineering Technician ActalentEngineering TechnicianLebanon, OH$26–$32 / hourYou will collaborate closely with cross-functional teams including R&D, Engineering, Manufacturing, and Quality in a hands-on, technology-driven setting that emphasizes safety, quality, and continuous improvement, while offering opportunities for professional growth as the operation scale. The position offers hands-on involvement with cutting-edge battery technology, automated test systems, and electronics assembly, and provides clear opportunities for growth into more advanced technical roles as the organization expands.
NewAMER Regional Program Manager, AMER Construction Programs Amazon Data Services, Inc.AMER Regional Program Manager, AMER Construction ProgramsNew Carlisle, OHKey responsibilities include: • Deploy periodic business reviews to monitor progress and influence business decisions with regional and cross-regional impact • Conduct analytical deep dives on milestone misses and KPI performance to identify root cause and fix actions • Deliver weekly progress reporting, build readiness support, escalation reports, and regional pre-syncs at T-6 • Serve as single point of contact for regional initiative management — from concept through AMER-wide deployment • Drive alignment with partner teams to reduce CM level of effort and remove blockers • Compile monthly build health metrics across Safety, Quality, Delivery, Cost, and Security pillars • Develop and scale processes, tools, and templates that prevent and remediate delivery issues. Regional Program Managers are constantly challenged to deliver analytical insight, identify delivery risks before they impact milestones, and drive alignment across cross-functional partner teams — all while ensuring leadership has the information it needs to make timely, informed decisions.
NewAMER Schedule Controls Manager, AMER Schedule Controls Amazon Data Services, Inc.AMER Schedule Controls Manager, AMER Schedule ControlsNew Carlisle, OHKey responsibilities include: • Conduct weekly schedule quality reviews on active builds against the AMER scheduling specification • Validate GC schedules (pre- and post-contracted) against committed milestones (H2C, NEA, PFHO) • Develop and maintain schedules at L1–L5, including logic ties, resource loading, and delivery cadence assumptions • Perform schedule risk analysis and what-if scenarios to support proactive intervention • Create schedule reports and dashboards for regional and executive audiences • Support field audits to validate schedule accuracy and process adherence • Travel domestically up to 50% to support active builds and milestone readiness assessments. The AMER Schedule Controls Manager is responsible for providing centralized scheduling expertise across the AMER construction portfolio — ensuring schedule spec adherence, conducting weekly schedule quality reviews on active builds, and driving consistency in delivery methodology across all clusters.
Aviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianSpringfield, OHWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
NewElectronic Warfare M&S Engineer Sparks GroupElectronic Warfare M&S EngineerBeavercreek, OHWe’re looking for an electrical engineer or physicist who can use their skills to provide the U.S. warfighter cutting edge capabilities in modeling and simulation (M&S) of the RF Spectrum. utilize programming languages such as C or C++, MATLAB, and Python to develop models of signal processing and Electronic Warfare techniques.
LEAD ENGINEER - PRINCIPAL ENGINEER - Avionics OFP Architect within ARINC 653 RTOS Southwest Research Institute - FulltimeLEAD ENGINEER - PRINCIPAL ENGINEER - Avionics OFP Architect within ARINC 653 RTOSMultiple LocationsFull timeLead teams to develop complex microprocessor based avionics/mission/payload LRU's through the full development cycle (Requirements, design, integrate, V&V, qualification, flight test, etc). We provide avionics and payload/mission equipment for airborne/ground systems for new and legacy platforms for the DoD industry, Allies, and U.S. Government.
MANAGER-R&D - Section Manager - Ohio - Dayton, OH Southwest Research Institute - FulltimeMANAGER-R&D - Section Manager - Ohio - Dayton, OHDayton, OHFull timeThe Ohio office focus is on Neuromorphic Computing AI, Modeling & Sim, Human Factors and UAS/CCV while supporting programs across the Tactical Aerospace organization which includes embedded complex electronics for the aerospace/avionics markets. We design, integrate, and manufacture avionics, mission computers, payload electronics, sensors, AI systems, test systems, and modeling/simulation for the defense market.
NewData Center Controls Engineer, Data Center Capacity Delivery - Controls Amazon Data Services, Inc.Data Center Controls Engineer, Data Center Capacity Delivery - ControlsTrenton, OHAWS Data centers have multiple components such as generators, uninterruptable power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic/static transfer switches, chillers [air-cooled and water-cooled], pumps, cooling towers, heat exchangers, CRAHs, air economizers, etc. • Frequently visit (locally) assigned in-operation data centers to troubleshoot, meet customers, supervise vendor’s work to ensure compliance with the scope, design, SOO and applicable local codes.
NewElectronic Design Engineer Synectics IncElectronic Design EngineerSpring Valley, OHJob Description Seeking an Electrical Design Engineer with experience in embedded systems, analog and digital circuit design, RF electronics, and low power product development. With a people-first approach, we focus on understanding the unique needs of our clients and candidates to create long-term, successful matches.
NewAutomation Field Service Engineer HAHN Automation GroupAutomation Field Service EngineerDayton, OHWe offer industry-specific know-how, an extensive project portfolio, and a global organization with a focus on providing service all from a single source.\r\n\r\nWith facilities located in Hebron, KY, Queretaro, MX, Miamisburg, OH, and Columbia, SC the HAHN Automation Group is a full-service, specialty machine builder—engineering, manufacturing, installing, and servicing custom application assembly and test equipment specifically in support of customers in Med-Tech, Automotive, and Transformation Technology industries. With facilities located in Hebron, KY, Queretaro, MX, Miamisburg, OH, and Columbia, SC the HAHN Automation Group is a full-service, specialty machine builder—engineering, manufacturing, installing, and servicing custom application assembly and test equipment specifically in support of customers in Med-Tech, Automotive, and Transformation Technology industries.
NewManufacturing/Quoting Engineer Premier Aerospace Group, dba JBK Manufacturing, LLCManufacturing/Quoting EngineerDayton, OHThrough the utilization of strong business practices, investing in new machinery, and highly skilled employees, we continue to re-engineer ourselves to provide our customers with viable solutions for any project.\r\n\r\nWe are the best partners for success when it comes to high-quality CNC precision machining, assembly, tube bending, welding, and brazing along with other special processes. Job Description The Manufacturing Engineer will manage, review, and create quotes for incoming jobs, design the production processes and machinery and will identify and implement solutions to production problems related to materials, processes, work instructions and tooling.
NewLaunch Manager, Manufacturing American Battery SolutionsLaunch Manager, ManufacturingSpringboro, OHAccountable for overseeing all aspects of new program launch as it pertains to the manufacturing and production plant or prototype facility including but not limited to build scheduling & reporting, driving supplier demand back top purchasing, tracking materials and WIP through builds, resolving issues & priority conflicts, managing readiness actions, leading shipment signoffs, and managing Engineering & Process Change Control. Orion Township is a Pure Michigan Trail Town that has a long-standing dedication to enhancing trails and pathways in its community, which is home to the Polly Ann Trail, Paint Creek Trail, and Iron Belle Trail.
NewField Service Engineer ActalentField Service EngineerHamilton, OH$40–$60 / hourWork is primarily performed on-site in an industrial data center setting, involving regular interaction with control panels, instrumentation, PLCs, HMIs, and networking equipment, as well as use of laptops and online tools for documentation and tracking. Work Environment This role is based on a data center project located in Helper, Utah, with the current project slated to run until March 2027, after which the Controls Engineer will transition to a different project site.
Systems Engineering Co-op - Electrical Engineering & Computer Engineering/Science (Electric Power) - US - Spring 2027 GE AerospaceSystems Engineering Co-op - Electrical Engineering & Computer Engineering/Science (Electric Power) - US - Spring 2027Dayton, OhioAn Aerospace Systems & Defense intern/co-op may experience work in the development of engine controls, navigation, & guidance systems; gas turbine engine components; electrical power systems; mechanical systems; vehicle health & data management systems; mission systems; computing systems; and platform systems integration. You’ll build professional and technical skills in an aerospace systems & defense role working on challenging, real-world problems to design aerospace systems for commercial and military applications & support through service life.
Systems Engineering Co-op - Electrical Engineering & Computer Engineering/Science (Electric Power) - US - Fall 2027 GE AerospaceSystems Engineering Co-op - Electrical Engineering & Computer Engineering/Science (Electric Power) - US - Fall 2027Dayton, OhioAn Aerospace Systems & Defense intern/co-op may experience work in the development of engine controls, navigation, & guidance systems; gas turbine engine components; electrical power systems; mechanical systems; vehicle health & data management systems; mission systems; computing systems; and platform systems integration. You’ll build professional and technical skills in an aerospace systems & defense role working on challenging, real-world problems to design aerospace systems for commercial and military applications & support through service life.