NewEngineering Technician C (NDT) L3Harris TechnologiesEngineering Technician C (NDT)Huntsville, ALWe are seeking an Engineering Technician (NDT) Level C to support our state‑of‑the‑art Advanced Manufacturing Facility (AMF) in Huntsville, AL, which serves as our inert manufacturing facility for the fabrication and assembly of composite rocket motor hardware. • Bachelor’s degree with a minimum of 4 years of prior relevant experience; or a graduate degree with a minimum of 2 years of related experience; or, in lieu of a degree, a minimum of 8 years of prior related experience.
NewControls Technician JobotControls TechnicianTroy, AL$60,000–$120,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. The successful candidate will have a strong understanding of PLC, sensors, drives, 3 phase electrical systems, and will have a proven track record in maintenance, troubleshooting, and repair.
Diesel Technician/Mechanic III - Entry Level Penske Truck RentalDiesel Technician/Mechanic III - Entry LevelMOBILE, ALWillingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles.
Field Technician - Automotive Butler America AerospaceField Technician - AutomotiveHuntsville, AL$30–$35 / hourContractorPerforms a variety of maintenance and technical support on products such as equipment, integrated systems and subsystems, and software at customer and/or field locations. Technician responsibilities will be maintaining/troubleshooting wheeled and track vehicles, such as M270, M270A1, and HIMARS vehicles.
NewField Technician Nesco Resource, LLCField TechnicianRedstone Arsenal, ALPerforms a variety of maintenance and technical support on products such as equipment, integrated systems and subsystems, and software at customer and/or field locations. Bulldozers, front end loaders, Render technical guidance to resolve difficult and unusual maintenance problems.
NewAutomation Technician Diedre Moire Corp.Automation TechnicianPrattville, AL$80,000–$140,000 / yearFull timeCONSIDERED EXPERIENCE INCLUDES: Regional Field Service Mechatronics Electrician Automation Mechanic Tech Electronics Technician Engineering tech Installation Maintenance Repair Configure Sofware Program Machine Machinery FactoryTalk PanelBuilderControl Panels Sesors PLCs HMI Motor Drives Actuator Motion Controls Machine Vision #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #biotechjobs #FieldServiceJobs #LabTechnicianJobs. Regional Field Service Mechatronics Electrician Automation Mechanic Tech Electronics Technician Engineering tech Installation Maintenance Repair Configure Sofware Program Machine Machinery FactoryTalk PanelBuilderControl Panels Sesors PLCs HMI Motor Drives Actuator Motion Controls Machine Vision _.
New(DoD SkillBridge), Composite Technician L3Harris Technologies(DoD SkillBridge), Composite TechnicianHuntsville, ALOperate a variety of machinery and shop equipment, which may include ovens, autoclaves, manual and CNC lathes, CNC milling centers, manual mills, boring mills, presses, furnaces, mixers, grinders, swages, paint booths, fume hoods, and overhead cranes. Produce parts, components, and final assemblies using composite fabrication, compression molding, metal fabrication, modification, checkout, rework, quality testing, and assembly, following detailed work instructions, schematics, diagrams, layouts, and manufacturing or diagnostic equipment.
NewField Service Technician JobotField Service TechnicianBirmingham, AL$30–$36 / hourInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. Troubleshooting, maintenance, and repair of industrial machinery and equipment, including PLC, three-phase motors, drives, hydraulics, and pneumatics systems.
NewField Technician PPM Consultants, IncField TechnicianIrondale, ALResponsibilities include, but are not limited to: • Collect air, water, soil, groundwater, and sediment samples in accordance with established procedures • Gather field data necessary to evaluate environmental conditions and support project objectives • Perform routine operation, maintenance, and monitoring of environmental remediation systems • Troubleshoot mechanical and electrical issues associated with remediation equipment and field systems • Conduct groundwater monitoring, system inspections, and equipment performance evaluations • Oversee subcontractors and coordinate field activities to ensure project requirements are met • Conduct environmental inspections and assessments at commercial, industrial, and retail facilities • Assist with regulatory compliance activities, data collection, and environmental reporting • Accurately document field activities, observations, measurements, and sampling results • Safely operate tools, equipment, and company vehicles while adhering to company health and safety procedures • Travel to project sites as required and support multiple projects concurrently PPM offers competitive compensation, comprehensive benefits, professional development opportunities, and the chance to work on a diverse range of environmental projects alongside experienced industry professionals. Job Title Field Technician Job Type Full-time Career Level Entry Level Education High School Location Birmingham - Birmingham, AL 35210 US (Primary) Category Technicians Job Description PPM Consultants, Inc. (PPM) is seeking candidates for a full-time Environmental Field Technician position based in our Birmingham, Alabama office.
Maintenance Technician Diedre Moire Corp.Maintenance TechnicianGadsden, AL$80,000–$120,000 / yearFull timeCONSIDERED EXPERIENCE INCLUDES: Maintenance Technician Mechanic Electrician Beverage Bottling Water Filtering Mixers Blenders Carbonators Automated Bottle Fillers Cappers Labelers Boxers PLCs HMIs Motors Rotary & Linear Motion Components Hydraulics Pneumatics #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #fieldservicejobs #technicianjobs #MaintenanceMechanicJobs. Maintenance Technician Mechanic Electrician Beverage Bottling Water Filtering Mixers Blenders Carbonators Automated Bottle Fillers Cappers Labelers Boxers PLCs HMIs Motors Rotary & Linear Motion Components Hydraulics Pneumatics _.
NewHVAC Technician Trane TechnologiesHVAC TechnicianTriana, AL$28.64–$54.26 / hourMust possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years. What's in it for you: This role is the primary service and maintenance contact for Trane Technologies customers in a defined market with a diverse commercial base including Healthcare, Process Manufacturing Facilities, Education Institutions, and Office Complexes.
NewControls Installation Technician Trane TechnologiesControls Installation TechnicianMount Meigs, AL$13.87–$33.97 / hourMust possess a valid driver’s license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years Annual Base Salary Range or Hourly Base Pay Range: $13.87 - $33.97 Compensation Type: Hourly Incentive Eligible: No Sales Commission Eligible: No Disclaimer: We strive to provide competitive compensation for this position, tailored to a variety of factors. What's in it for you: This role is the primary service and maintenance contact for Trane Technologies customers in a defined market with a diverse commercial base including Healthcare, Process Manufacturing Facilities, Education Institutions, and Office Complexes.
NewControls Installations Technician Trane TechnologiesControls Installations TechnicianMount Meigs, AL$21.96–$33.97 / hourAdditional Requirements and Environmental Exposure: Must be able to safely and legally operate a vehicle using a seat belt Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties Must be able to twist the trunk of your body 90 degrees in each direction Must be able to squat and touch the floor with both hands Must be able to reach your hands over your head Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours this position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. or less Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15’ to 20’, and occasionally, up to 50 feet This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location Annual Base Salary Range or Hourly Base Pay Range: $21.96 - $33.97 Compensation Type: Hourly Incentive Eligible: No Sales Commission Eligible: No Disclaimer: We strive to provide competitive compensation for this position, tailored to a variety of factors.
Thermography Engineering Technician-NDE (ET4-ET6) AmentumThermography Engineering Technician-NDE (ET4-ET6)Huntsville, AlabamaThe Non-Destructive Evaluation and Damage Tolerance Group serving the Non-Destructive Evaluation and Damage Tolerance Branch (EM21) at Marshall Space Flight Center (MSFC) in Huntsville, AL has an opening for an Engineering Technician, with certifications and training in Thermography, to execute job duties in Non-destructive Evaluation (NDE). The Thermography Engineering Technician will: Operate and maintain NDE testing equipment, such as thermography equipment: thermal wave imaging systems, infrared cameras, including troubleshoot equipment/ system problems, identify corrective actions, and implement corrective actions upon approval.
Thermography Engineering Technician-NDE (ET4-ET6) Amentum Services IncThermography Engineering Technician-NDE (ET4-ET6)Huntsville, ALOverview: The Non-Destructive Evaluation and Damage Tolerance Group serving the Non-Destructive Evaluation and Damage Tolerance Branch (EM21) at Marshall Space Flight Center (MSFC) in Huntsville, AL has an opening for an Engineering Technician, with certifications and training in Thermography, to execute job duties in Non-destructive Evaluation (NDE). Responsibilities: The Thermography Engineering Technician will: Operate and maintain NDE testing equipment, such as thermography equipment: thermal wave imaging systems, infrared cameras, including troubleshoot equipment/ system problems, identify corrective actions, and implement corrective actions upon approval.
NewENGINEERING TECHNICIAN (CIVIL) United States ArmyENGINEERING TECHNICIAN (CIVIL)Huntsville, AL$89,508–$116,362 / yearBasic Requirement for Engineering Technician (Civil) GS-12 Level: Specialized Experience: One year of specialized experience equivalent to at least the next lower grade level in the Federal service that includes: supporting the planning, design, construction, operation, maintenance, inspection, or rehabilitation of civil works infrastructure, such as dams, navigation facilities, flood risk management facilities, or related systems; reviewing or preparing scopes of work, plans, specifications, technical submittals, cost estimates, or contract documentation for maintenance, repair, or construction work; performing or supporting facility inspections, condition assessments, quality-assurance activities, or analysis of infrastructure deficiencies; and coordinating with engineers, project managers, construction personnel, and operations staff to ensure projects are safe, operable, maintainable, and ready for transition to service. Time-in-grade documentation: If you are applying for a higher grade and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one year time-in-grade requirement so you will need to provide an SF-50 which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-grade Grade/Range Increases, and SF-50s with an effective date more than one year old).
Electrical Engineering Technician FMS AerospaceElectrical Engineering TechnicianHuntsville, ALWill work with a team of Electrical and Design Engineers and PMs to troubleshoot, design, and implement electrical systems supporting various military and commercial customers Provide offsite & onsite assistance and installation of electrical systems Mentored by avionics and electrical engineering technicians and junior level electrical engineers within the company Occasionally be asked to travel to hangars, bases, customer sites to facilitate successful system integration of mechanical and electrical and provide assistance as needed to Project Managers at onsite locations. 2-4 years' experience in avionics and/or electrical wiring systems Minimum of a high school diploma/GED IPC-620 certification is a must Experience reading electrical drawings Experience in a production/manufacturing setting Strong interpersonal skills and the ability to work proficiently with remotely located employees as well as in a team environment Proficiency in English (written and spoken) Must be U.S. citizen Must currently possess an active Department of Defense Secret clearance.
Engineering Technician IV Science Applications International CorpEngineering Technician IVHuntsville, ALOur robust portfolio of offerings across the defense, space, civilian, and intelligence markets includes secure high-end solutions in mission IT, enterprise IT, engineering services, and professional services. By providing the information below and checking the boxes referenced, you acknowledge and consent to SAIC''s Privacy Policy to include access and use of your information for the purposes of sharing your information for possible employment recruitment effects by SAIC and it''s third party vendors.
Project Engineering Technician I - CQA BUNNELL LAMMONS ENGINEERINGProject Engineering Technician I - CQABirmingham, ALSupport senior technicians during geosynthetics deployment observation activities, including monitoring panel placement, seam welding operations, and anchor trench installation. Observe and document installation of geosynthetic materials such as geomembranes, geotextiles, geocomposites, and drainage layers used in earthwork and containment systems.
Engineering Technician United States ArmyEngineering TechnicianHuntsville, AL$70,623–$111,087 / yearIn addition to meeting one of the basic requirements above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: GS-11: One year of specialized experience equivalent to the GS-10 grade level in the Federal service which includes: practical experience in the construction trades and crafts and formal training to perform engineering design and cost estimates for the maintenance and repair, new construction, alterations and modifications of architectural, civil, electrical and mechanical systems and equipment within the Directorate of Public Works. Experience in a trade or craft that work required intensive knowledge of engineering principles, techniques, methods, and precedents for example trade positions with substantial developmental, test, or design responsibilities such as: a Planner and estimator who analyzed designs for production purposes or an Instrument maker or model maker who performed design or development work on devices fabricated.