Assistant Inspector - Bridge Inspection WSP Global IncAssistant Inspector - Bridge InspectionSalt Lake City, UT$61,000–$87,700 / yearOur Mountain/Pacific Northwest Inspection Group is growing and looking to hire Assistant Inspectors for bridge, culvert, tunnel, ancillary structures, retaining wall and other structure inspections for state DOTs, transit authorities and local agencies. WSP USA is providing the compensation range that the company in good faith believes it might pay and/or offer for this position within the state of Colorado, based on the successful applicant's education, experience, knowledge, skills, and abilities in addition to internal equity and specific geographic location.
Final Finish & Inspection Technician Smart ResourcesFinal Finish & Inspection TechnicianOrem, UTIn this role, you'll carefully clean, inspect, and prepare finished tables, chairs, and other products by removing dust, fingerprints, and other surface imperfections while identifying any quality concerns. Previous manufacturing, quality inspection, finishing, or production experience is a plus but not required.
Building Inspections Officer - City Of Pleasant Grove Jefferson County (AL)Building Inspections Officer - City Of Pleasant GrovePleasant Grove, UT$53,726–$83,324 / yearExperience in at least one of the following areas: Installing electrical systems; Installing and sizing heating and cooling systems and vents; Installing plumbing systems or gas piping; Performing structural framing/carpentry work; and overseeing or carrying out the residential or commercial construction. Conducts general inspection activities for contractors by checking for valid permits, ensuring plans comply to relevant codes, and issuance of Certificates of Occupancy in accordance with professional inspections procedures so construction projects are compliant with codes.
Production Inspection C L3Harris Technologies IncProduction Inspection CSalt Lake City, UTTo help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g. Job Description: Our Quality Assurance Inspectors are responsible for performing inspections, audits of purchased parts, units, units, materials, equipment, panel/module level assemblies and quality control programs to specifications.
Building Inspections Officer - City of Pleasant Grove Personnel Board of Jefferson CountyBuilding Inspections Officer - City of Pleasant GrovePleasant Grove, UT$53,726–$83,324 / yearExperience in at least one of the following areas: Installing electrical systems; Installing and sizing heating and cooling systems and vents; Installing plumbing systems or gas piping; Performing structural framing/carpentry work; and overseeing or carrying out the residential or commercial construction. Conducts general inspection activities for contractors by checking for valid permits, ensuring plans comply to relevant codes, and issuance of Certificates of Occupancy in accordance with professional inspections procedures so construction projects are compliant with codes.
Downstream (Manufacturing) – Risk Based Inspection Engineer Chevron CorporationDownstream (Manufacturing) – Risk Based Inspection EngineerSalt Lake City, UT$104,700–$206,400 / yearChevron explores for, produces and transports crude oil and natural gas; refines, markets and distributes transportation fuels and lubricants; manufactures and sells petrochemicals and additives; generates power; and develops and deploys technologies that enhance business value in every aspect of the company's operations. + Special Considerations: Chevron has Manufacturing (Refineries) located in: Richmond, CA (greater San Francisco area), El Segundo, CA (greater Los Angeles area), Pasadena, TX (greater Houston area), Salt Lake City, UT, Pascagoula, MS (greater MS Gulf Coast area).
Certified Bridge Inspection Team Leader WSP Global IncCertified Bridge Inspection Team LeaderSouth Jordan, UT$103,000–$160,000 / yearIn this role, you will lead NBIS/NTIS inspections of bridges, tunnels, ancillary structures, and other transportation structure and deliver high quality technical documentation and reports that support our clients' infrastructure programs. WSP USA is providing the compensation range that the company in good faith believes it might pay and/or offer for this position within the state of Colorado, based on the successful applicant's education, experience, knowledge, skills, and abilities in addition to internal equity and specific geographic location.
Bridge Inspection Project Manager/Team Leader WSP Global IncBridge Inspection Project Manager/Team LeaderSouth Jordan, UT$120,000–$187,000 / yearLead larger-scale, more complex bridge inspection projects ensuring contributors know what they are required to do and by when, preparing and overseeing relevant project budgets, monitoring external events, tracking hours and expenses, ensuring satisfactory performance, and supervising subcontractors, contract work, and employees. You will utilize your education, licensure, NHI/FHWA bridge/structure inspection certifications, and relevant work experience to perform inspections of bridges, culverts, tunnels, ancillary structures, retaining walls, and other structures for our clients.
Bridge Inspection-Team Leader (48298) Collins Engineers, Inc.Bridge Inspection-Team Leader (48298)West Jordan, UTCollins is a leader in the transportation, marine, and site/civil contract services industries, has an exciting opportunity for an experienced Bridge Inspection-Team Leader in our Salt Lake City, Utah, office. The Team Leader is also responsible for supporting the delivery of inspection and design projects and serves as the Project Manager on moderately complex inspection projects.
Quality Control Inspector - 1591 Professional RecruitersQuality Control Inspector - 1591Lehi, UtahKey Responsibilities : The Quality Control Inspector must be capable of performing visual inspection, 100% welding inspection, shop production fit up inspection, tolerances per spec and customer requirements, basic knowledge of AWS D1.1, and/or structural steel fabrication inspection. Are you ready to make an impact as a Quality Control Inspector in Lehi, Utah?
CMM Inspector GAL AeroStaffCMM InspectorPark City, UTGAL AeroStaff Ltd. is an aerospace staffing company specializing in temporary and permanent staffing for general and technical positions in the aviation and aerospace industry. The employee is regularly required to sit, stand, walk, speak, hear, and use their hands to operate tools and inspection equipment.
Construction Inspector I / II Pleasant Grove CityConstruction Inspector I / IIPleasant Grove, UTFull timeAbility to develop and maintain effective working relationships with elected officials, federal agencies, state agencies, local governments, subordinates, and the publicEstablish and maintain effective working relationships with those contacted in the course of workMaintain mental capacity which allows for effective interaction and communication with othersKnowledge of methods and interpretation of soil analysis, materials, compaction and density testsAbility to use a tablet/laptop along with software such as e-mail, Microsoft suite, and asset management. Construction Inspector I: $29.33 / hr to $41.05 / hr- Construction Inspector II: $32.26 / hr to $45.16 / hr Under general supervision of the City Engineer, the Construction Inspector performs construction management duties of the City's infrastructure and roadway projects including inspection of improvements installed in new developments, sewer, storm water, water lines, roadways, curb, gutter, and sidewalks.
NewSenior QA/QC Inspector Exyte GmbHSenior QA/QC InspectorLehi, UTExentec and Exential serve the semiconductor, life sciences, and other advanced technology industries, offering integration and installation of everything from high-purity piping for gas, chemical, and water systems to chilled water, wastewater, and HVAC systems, along with a full suite of electrical and controls systems. This role is responsible for inspecting installed and partially installed process piping systems and ensuring proper material handling in compliance with project‑specific quality assurance programs.
Quality Analyst - Inspector SEGULA TechnologiesQuality Analyst - InspectorUtah, UTIn this role, you will act as the first line of defense to protect production, ensuring supplier issues are detected early and contained before impacting operations. You will be assigned to suppliers and will regularly travel to manufacturing sites to perform on-site quality oversight.
Quality Assurance Inspector I Integra LifeSciencesQuality Assurance Inspector IWest Valley, UtahTo perform this job successfully, an individual must be able to execute the following responsibilities satisfactorily: Conduct incoming inspections of raw materials and components to verify compliance with specifications. All CVs/resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company.
CMM Inspector Triumph Group IncCMM InspectorPark City, UTThe Company's key products and services include power transmission systems, integrated gearbox design and builds, airframe mounted accessor drives (AMAD's), engine mounted accessory drives (EMAD's), rotorcraft transmissions, turboshaft internal gearboxes, emergency power gearboxes, and large complex aero gears for both OE and aftermarket/spares end markets. Based in Park City, UT, Triumph Geared Solutions is a leading independent aerospace gear and gear box supplier for the commercial and military helicopter and business jet markets and employs approximately 200 employees.
NewQuality Inspector I-III, 2nd Shift 4PM-2:30AM Nammo Defense SystemsQuality Inspector I-III, 2nd Shift 4PM-2:30AMSalt Lake City, UtahCan utilize the following items without supervision, but may require assistance in troubleshooting: Calipers, height gauges, OD/ID mics, Vernier scale, Romer Arm Usage, Optical Comparators, Pi Tapes. Trained on the following basic skills, but may require supervision including: Calipers, height gauges, OD/ID mics, Vernier scale, Romer Arm Usage, Optical Comparators, Pi Tapes.
NewQuality Technician III - Receiving Inspector AeroVironment IncQuality Technician III - Receiving InspectorWest Valley City, UTProcesses inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks. Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers.
NewQuality Inspector I-III, 2nd Shift 4PM-2:30AM Nammo ASQuality Inspector I-III, 2nd Shift 4PM-2:30AMSalt Lake City, UTCan utilize the following items without supervision, but may require assistance in troubleshooting: Calipers, height gauges, OD/ID mics, Vernier scale, Romer Arm Usage, Optical Comparators, Pi Tapes. Trained on the following basic skills, but may require supervision including: Calipers, height gauges, OD/ID mics, Vernier scale, Romer Arm Usage, Optical Comparators, Pi Tapes.
Construction Inspector I, II, III, IV & V Raba Kistner Consultants IncConstruction Inspector I, II, III, IV & VMidvale, UTPotential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to follow proper safety procedures and utilize appropriate protective equipment. Under general supervision, this individual inspects construction activities to ensure compliance with project plans, approved shop/working drawings, project documents and specifications in accordance with established procedures; reporting observations orally and in writing to direct report.