57 Results for

Inspection Jobs in Federal Way, WA

Jobs

Seattle, WA

Full time

While performing the duties of this job, physical demands of the employee may include frequent talking, hearing, standing, moving, walking, stooping, kneeling, crouching, crawling, reaching, handling, grasping, feeling, balancing, coordination, and occasional sitting or operating a company vehicle. • This field job primarily operates in outdoor work environments that may include exposure to inclement weather, heat, humidity, noise, hazard, atmospheric conditions, and bodies of water, depending on project requirements.

26 days ago

Seattle, WA

$150,000–$215,000 / year
Full time

24 days ago

Kent, WA

Full time

Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Quality In-Process Inspectors at this level shall demonstrate an expert level of blueprint reading in order to determine critical drawing tolerances and specific finishing requirements directly involving dimensional control, along with the use of advanced measurement equipment such as micrometers, (telescope, dial, and pistol grip) bore gages, and Sunnen PG bore gage, to name a few.

30+ days ago

Bonney Lake, WA

Full time

Pay may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

30+ days ago

Seattle, WA

$20–$40 / hour
Full time

Person" means (i) a U.S citizen or U.S. national; or (ii) any natural person who is a U.S. Lawful Permanent Resident (i.e., holds a Green Card), as defined by 8 U.S.C. 1101(a)(20) or as a "protected individual" defined by 8 U.S.C. 1324b(a)(3) (i.e., admitted as a refugee or is granted asylum). We are looking for a self-directed QC Inspector to own day-to-day incoming inspection of custom mechanical parts, verify supplier documentation, and build clean inspection records.

26 days ago

Seattle, WA

$115,000–$166,400 / year
Full time

Prepares accurate, complete, and timely Inspector Daily Reports (IDRs) documenting weather, manpower, equipment, work activities, locations, materials placed, quantities, testing performed, deficiencies, and discussions held with the contractor. Ramos CS, now a part of Colliers Engineering & Design, is actively hiring an Inspector to perform a wide variety of field inspection work on a transit capital program covering rail and bus construction scopes.

27 days ago

Woodmont Beach, WA

Full time

Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Current approvals include the National Aerospace and Defense Contractors Accreditation Program, (NADCAP), Boeing Commercial Aircraft Company, Boeing Defense and Space, Boeing/Philadelphia, Boeing Long Beach, Grumman, Gulfstream, Lockheed Martin, Goodrich, Bombardier, Cessna and Sikorsky among much else.

20 days ago

Port Orchard, WA

Full time

Ability to operate a personal computer and related word processing, permitting, and engineering software; perform complex and technical review of construction plans; perform a variety of inspections at construction sites; work independently with little direction; communicate effectively with the public, contractors, developers and co-workers, both orally and in writing; explain technical items and problems in a lay person’s terms, and read, interpret, apply, and explain regulations, codes plans, policies, and procedures. Conduct field inspections of construction projects to ensure compliance with the International Code Council (ICC) Building, Mechanical, Plumbing and Fire Codes, State Energy, Ventilation and Indoor Air Quality and Barrier Free Codes, as well as other state laws and City of Port Orchard Ordinances and policies.

30+ days ago

Woodinville, WA

Full time

To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)).

30+ days ago

Kirkland, WA

$21.93–$29.67 / hour

Minimum Qualifications** **Education/Experience** + High school diploma or general education degree (GED) + Demonstrates **familiarity** (typically 1 year of direct experience in the duties, responsibilities and skills of the role for consideration as **Quality Inspector** . **Duties & Responsibilities** + Utilize complex measuring devices to perform inspections of purchased parts, materials, components, electronic hardware, and equipment as they are received from vendors or subcontractors, working primarily within the mechanical cell.

24 days ago

Kirkland, WA

$21.93–$29.67 / hour

Quality Inspector, Shipping Inspection (2026-075) Astronics Subsidiary Astronics Advanced Electronic Systems Location Kirkland, WA Description Astronics Advanced Electronic Systems (AES) is seeking a **Quality Inspector** for our **Shipping Inspection Group** . This role works from blueprints, engineering change notices, and established operating procedures to perform a wide range of inspection activities and to determine acceptance, rejection, or rework requirements at various stages of production.

24 days ago

Kirkland, WA

$21.93–$29.67 / hour

Quality Inspector, Receiving Inspection (2026-077) Astronics Subsidiary Astronics Advanced Electronic Systems (AES) Location Kirkland, WA Description Astronics Advanced Electronic Systems (AES) is seeking a **Quality Inspector** for our **Receiving Inspection Group** . **Job Summary** The **Quality Inspector, Receiving Inspection** is responsible for performing incoming inspections of purchased parts, materials, components, electronic hardware, and equipment to ensure they meet Astronics AES quality, engineering, and customer requirements.

24 days ago

Kirkland, WA

Working from blueprints, engineering change notices, and established operating procedures, you will bridge the gap between engineering specifications and finished hardware, ensuring the integrity of complex mechanical components throughout the production lifecycle. Precision Inspection: Utilize complex measuring devices to perform high-level verification of purchased parts, materials, components, and equipment received from vendors or subcontractors.

17 days ago

Bellevue, Washington

At Qnity, we’re more than a global leader in materials and solutions for advanced electronics and high-tech industries – we’re a tight-knit team that is motivated by new possibilities, and always up for a challenge. Operational Excellence in our workplace unleashes the energy, creativity and collaboration – along with our tools, technology and training – that enables our people to perform at their best.

30+ days ago

Redmond, WA

$36.47–$60.86 / hour

In addition to the above required competencies and experience, hiring preference will be given to those candidates with the following certifications or experience: Candidates with applicable construction inspection and testing certifications from the American Concrete Institute (ACI), International Code Council (ICC), National Institute for Certification in Engineering Technologies (NICET); the American Welding Society (AWS). This role''s primary function is to ensure Kleinfelder exceeds client expectations through frequent client communication, mentoring and managing Kleinfelder''s local CoMET services team, planning and executing technical work, monitoring, and controlling project budgets, and working to expand our client base.

30+ days ago

Olympia, WA

$97,500–$199,500 / year

You will work closely with Legal, Compliance, Risk Management, Real Estate & Facilities, Finance, Procurement, Operations, site leadership, brokers, vendors, and local agencies to coordinate compliance workflows, monitor deadlines, identify gaps, and support remediation. - Partner with Legal, Facilities, Real Estate, Risk Management, Procurement, Finance, Operations, site teams, vendors, brokers, and external agencies to collect documentation, confirm requirements, and resolve open compliance items.

30+ days ago

Tukwila, WA

$80,000–$120,000 / year

The Fire Systems Inspection Manager is responsible for overseeing and managing all inspection activities related to fire sprinkler, fire alarm, and life safety systems, while also supporting revenue growth through new sales, customer retention, contract renewals, and identification of inspection- and deficiency-driven sales opportunities. COSCO Fire Protection is a multifaceted, full-service fire sprinkler and life safety systems company specializing in the installation, service, and inspection of a wide variety of automatic fire sprinkler systems, fire alarm (life safety) systems, kitchen suppression, extinguishers, and special hazard systems throughout the West Coast.

17 days ago

Tukwila, WA

$25–$30 / hour

We are seeking a motivated and engaging person who enjoys multi-tasking, learning on the job, and providing simultaneous support in a service and administrative capacity. Essential duties and responsibilities may include, but are not limited to, the following: Schedule inspections work orders to ensure they are completed on time.

17 days ago

Seattle, WA

$64,965.62–$99,000 / year

Competitive candidates should reside within one of the listed zip codes and will service this same territory: 98001, 98002, 98003, 98023, 98030, 98031, 98032, 98042, 98056, 98057, 98101, 98102, 98104, 98106, 98108, 98109, 98812, 98116, 98118, 98119, 98121, 98122, 98126, 98134, 98136, 98144, 98146, 98148, 98158, 98166, 98168, 98178, 98188, 98198, 98199. With the opportunity to initially earn up to 20 days annually plus parental leave, paid holidays, celebration day, life leave (40 hours/year), bereavement leave, and community service/education support days, there will be plenty of time for you!

6 days ago

Seattle, Washington

Over 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information.

20 days ago

Seattle, Washington

Known as North America’s largest home inspection company, Pillar To Post provides comprehensive training, proven systems, advanced tools, and strong internal support to help inspectors succeed. As a Residential Home Inspector, you will help home buyers, sellers, and real estate professionals make informed decisions by delivering thorough, high-quality inspections and detailed reports.

30+ days ago

Redmond, WA

$25–$33 / hour

PREFERRED SKILLS AND EXPERIENCE: • Understanding of ISO 9001/AS9100 quality management systems • Solid computer skills in Microsoft Word, Outlook and Excel • Ability to review drawings and identify improper callouts/datum structures, according to ASME Y14.5 • Thorough understanding of all layout inspection tools (surface plate, height gage, indicators, calipers, micrometers, gage blocks, thread gages, etc.). BASIC QUALIFICATIONS: High school diploma or equivalency certificate 2+ years of quality inspection experience in a machine shop or manufacturing environment 1+ years of experience with blueprint reading and/or GD&T (geometric dimensioning and tolerancing).

30+ days ago

Redmond, WA

$30.39–$50.72 / hour

From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America''s infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. Kleinfelder, a long-standing industry leader in the Puget Sound area, provides Transportation Quality Assurance Inspection and Testing Services to transportation agency clients in Washington State.

30+ days ago

Redmond, WA

$25–$46.63 / hour

Job Title: Quality Inspector C Job Code: 35432 Job Location: Onsite at our Redmond, WA facility Job Schedule: 4/10 - Employees work 8 out of every 14 days - totaling 80 hours worked - and have every Friday off Shift: 1st shift. With customers mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

30+ days ago

Seattle, WA

$190,000–$195,000 / year

Implement construction inspection, testing, and contract compliance programs on small and major public works projects in and around transit facilities; this work involves inspections of construction activities, materials, equipment, and machinery installation with occasional system start-up and commissioning. Inspect construction activities including trackwork, civil structures, concrete works, and associated rail infrastructure components; verify compliance with approved construction drawings, specifications, method statements, and inspection test plans (ITPs).

30+ days ago

Redmond, WA

$25–$33 / hour

unassisted + Must be able to stand for extended periods - 8 hours min + Willingness to work overtime and weekends when needed to meet critical deadlines + Up to 50% travel COMPENSATION AND BENEFITS: Pay range: Quality Inspector/Level 1: $25.00 - $33.00/hour Quality Inspector/Level 2: $30.00 - $39.00/hour Quality Inspector/Level 3: $35.00 - $45.00/hour ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

30+ days ago

Sumner, WA

$28–$32 / hour

30+ days ago

Kirkland, WA

$24.52–$36.79 / hour

The Senior / Specialist Quality Inspector will work from blueprints, engineering change notices, or established operating procedures to perform a wide range of inspection procedures and determine acceptance, rejection, or rework requirements at various stages of production. Utilize complex measuring devices to perform inspections of purchased parts, materials, components, electronic hardware, and equipment as they are received from vendors or subcontractors, working primarily within the mechanical cell.

30+ days ago

Redmond, WA

Is responsible for conducting incoming receiving inspections to IPC-A-610 class 3. Performs first article inspections (FAI) to AS9100, line inspections, finished goods and pack out inspections and audits on electronic, mechanical, and optic systems, subassemblies, and parts to ensure said items meet critical specifications. Understands and follows inspection plans, work orders, test manuals, performance specifications, wiring diagrams, shop drawing prints and schematics to determine, validate or comply with specification, testing procedure and equipment to be used.

26 days ago

Kent, WA

This role provides comprehensive construction management support for the Tahoma National Cemetery major construction project, which develops 15 of the 36 undeveloped acres remaining at Tahoma National Cemetery, adding an additional 15 years of burial services for eligible veterans in the Puget Sound region of Washington state. Inspections & quality control: Conduct daily site and building inspections; document defects, code violations, improper materials/techniques, and punch list items; observe contractor/subcontractor work for compliance and report findings to the SRE.

30+ days ago

Auburn, WA

$22–$28 / hour

Inspectors assist production personnel in establishing and documenting inspection criteria, prepare parts and documentation to meet outside criteria, completes all required inspection documentation and communicates as needed with customers. Our Quality Inspectors inspect products and/or documents at various stages of production, to validate processes and provide documentation required to show compliance to the Sonaca North America Quality System, while under close supervision.

30+ days ago

Auburn, Washington

12 days ago

Quality Assurance Inspector, WA

Our client in the Seattle, WA area is a Manufacturing Company in the composites industry with new phenolic-resin plastic laminates for aircraft and commercial use and is looking for a Quality Assurance Inspector responsible for providing support for their Company. Position purpose/core responsibilities: This Quality Assurance Inspector position primarily entails supporting and taking direction from QA Manager/Supervisor and uses the proven techniques for quality inspection.

16 days ago

Redmond, WA

$28.33–$40 / hour

Maintains product quality documentation by keeping accurate records and files; such as Material Certifications, First Article Inspection Reports (AS9102), Inspection Method Sheets (IMS), First Piece Inspection. Ensures adherence to applicable Triumph Group internal, federal, state and local laws and regulations related to compliance and takes responsibility to ensure ongoing conformity with such rules and regulations.

30+ days ago

Renton, WA

Skills and Requirements - Advanced blueprint reading skills - Able to use hand inspection tools (Calipers, 6" scales, height gage, etc.) - Advanced math aptitude - Able to support inspection functions in multiple work centers - Knowledge of industry record keeping procedures and best practices - Familiar with digital, electronic inspection media - Analytical and problem-solving skills, with the ability to identify root cause, and suggest corrective and continuous improvement actions - Interpersonal skills and the ability to work effectively with a wide range of people in a diverse workforce - 1-3 years of quality inspection experience in an aerospace manufacturing environment strongly preferred - Lean Manufacturing experience - Knowledgeable in autoclaves and/or ovens Additionally, you will document non-conformities on company rejection tags and inspection pick-up forms, provide information and assistance to production and supervisory personnel, and verify kits in final inspection before shipping.

13 days ago

Auburn, WA

$22–$28 / hour

Inspectors assist production personnel in establishing and documenting inspection criteria, prepare parts and documentation to meet outside criteria, completes all required inspection documentation, and communicate as needed with customers. Also, read and interpret customer instructions, blueprints, charts, and other statistical information; prepare parts and documentation for outside criteria; and participate in work center and other problem-solving teams as requested.

Today

Kent, Washington

This role provides comprehensive construction management support for the Tahoma National Cemetery major construction project, which develops 15 of the 36 undeveloped acres remaining at Tahoma National Cemetery, adding an additional 15 years of burial services for eligible veterans in the Puget Sound region of Washington state. Our people are our strength—we combine technical expertise, mission understanding, and operational excellence to deliver superior outcomes across the U.S. We take pride in improving operational effectiveness, resilience, and sustainability for complex facilities through informed strategy, innovative engineering, and exceptional performance.

30+ days ago

Seattle, WA

$6,253.75–$8,412.58

In addition to maintaining over 20,000 lane miles of state highway and 4,100 bridges, WSDOT leads an award-winning Active Transportation Plan, manages the worlds longest floating bridge, and operates the largest ferry system in the nation! Full-time employees who work full monthly schedules qualify for holiday compensation if they are employed before the holiday and are in pay status for at least 80 nonovertime hours during the month of the holiday; or for the entire work shift preceding the holiday.

24 days ago

Seattle, WA

$56,715–$90,190 / year

In addition to the qualifications above, experience must include working with the Federal Meat, Poultry, and Egg Products Inspection Acts in order to inspect meat, poultry and egg products; working with basic SSOP and HACCP principles and practices in order to verify plant HACCP and SSOP responsibilities; performing basic mathematics and elementary statistical concepts and methods to perform testing and sampling procedures; and experience in reaching and interpreting conclusions. Surplus or displaced employees eligible for CTAP, RPL, or ICTAP priority must provide: proof of eligibility (RIF separation notice, notice of proposed removal for declining a transfer of function or directed reassignment to another commuting area, notice of disability annuity termination), SF-50 documenting separation (as applicable), current performance appraisal with rating of at least "Fully Successful" or equivalent, and your most recent SF-50 noting position, grade level, and duty location with your application per 5 CFR 330.

19 days ago

Silverdale, WA

$98,520–$120,048 / year

OR A valid Washington General Journey Level Electrician (EL01) license and/or certificate issued by the Department of Labor and Industries and four years' experience as a journey level electrician performing the duties of an electrical inspector employed by the department or a city or town with an approved inspection program under RCW 19.28.141. Qualifications Required Qualifications: A valid Washington General Journey Level Electrician (EL01) license and/or certificate issued by the Department of Labor and Industries and four years' experience as journey level electrician in the electrical construction trade installing and maintaining electrical wiring and equipment.

30+ days ago

Bellevue, WA

$110,249.27–$121,692.60 / year

The six essential and enduring principles that guide our individual actions, our interactions, and our decision making in the City of Bellevue organization is: Exceptional Public Service, Stewardship, Commitment to Employees, Integrity, Innovation, and Diversity, Equity & Inclusion. Work involves walking on smooth or uneven surfaces, climbing stairs or ladders, talking, hearing, using hands to handle, feel or operate objects, tools, or controls and reach with hands and arms.

9 days ago

Silverdale, Washington

What to Expect in a Typical Day: Travel to homes to conduct thorough inspections, communicate findings professionally, prepare detailed reports, and follow up with clients to ensure satisfaction—all while supporting a team dedicated to quality and integrity. The Home Inspector plays a vital role in providing comprehensive evaluations of residential properties, assessing all structural and system components, including crawl spaces and attic areas.

30+ days ago

Seattle, WA

Full time

Other experiences may include: Asphalt pavement construction including hot plant inspection; Bridge construction including Portland cement batch plant inspection; Construction staking; Construction traffic control; Drainage structures (ditches, culverts, inlets); Erosion control, landscaping, mulching and seeding; Highway earthwork and grading; Highway materials testing; Miscellaneous highway construction features; Pavement striping; Post tensioned concrete construction; Recycled asphalt construction (milling and grinding); Structural concrete and steel construction; Subgrade and base course construction; Tunnel grouting and rock bolting; Wetlands mitigation and replacement; Retaining walls; Pavement preservation (chip seals, slurry seals, etc.); Underground utilities; and Sanitary sewer systems. Project Solutions Inc. is seeking highly motivated Construction Inspectors to perform project engineering field inspection work and project engineering technical support duties to a variety of civil construction projects with a primary focus on the Western Federal Lands Highway Division (WFLHD) of the Federal Highways Administration (FHWA).

30+ days ago

Redmond, WA

Full time

From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America's infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency.

30+ days ago

Seattle, WA

$41–$49 / hour

Inspectors will perform on-site inspections during active construction, review plans, specifications, and approved submittals, verify materials and workmanship, and document field activities, deficiencies, and testing observations. This role supports construction quality, field oversight, documentation accuracy, and compliance with contract requirements across multiple disciplines, including civil, structural, and electrical work.

12 days ago

Seattle, WA

Bachelor's degree in construction management or engineering OR relevant project experience in lieu of education * 5+ years of water/wastewater and/or facilities inspection and construction management experience * Knowledge of construction practices, physical characteristics and properties of drainage and utility systems construction materials, and the approved methods and equipment used in making physical tests of construction materials. This position will require you work independently and perform duties in the construction field office such as communicating issues and providing solutions concerning the work in progress, participate in project progress meetings and actively document the contractors work and field conditions.

16 days ago

Lacey, Washington

$31–$48 / hour

Progressively more responsibility and experience on DOT or municipal roadway projects including daily records and reports on asphalt paving, concrete work, grading, structural work, and erosions control preferred. May be required to participate in certification and training courses post-hire as required by OSHA, DOT, or client-specific requirements (i.e. concrete, asphalt certifications, erosion control, and safety training).

6 days ago

Seattle, Washington

11 days ago

Tukwila, WA

$35–$55 / hour

Minimum Requirements & Qualifications: • 5+ years relevant construction inspection, quality assurance, and quality control experience on transportation/heavy civil projects • ACI and ICC Certifications • Valid Driver's License and reliable driving record • Must have Basic Math, Calculator, and Computer Skills • Proficiency in MS Office applications (Word, Excel, and Outlook) • Must possess excellent written and verbal communication skills and be fluent in English • Must be able to read plans and specifications • Must be able to work off shifts and overtime • Computer skills, especially familiarity with MS Office applications, are necessary • Ability to lift, move, push, and pull 30 to 50 pounds frequently. Working at Intertek means joining a global network of state-of-the-art facilities and passionate people who deliver superior customer service with a purpose of bringing quality, safety, and sustainability to life.

30+ days ago

Renton, WA

Must be familiar with all common precision inspection equipment (calipers, height gauge, micrometers, pin gauges, thread gauges, optical comparator. If interested, please send your updated resume in Word doc format to Varsha at kevin@keltia-design.com with preferred pay requirements and availability and we will follow up very shortly.

16 days ago

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Inspection job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

Inspection Jobs in Federal Way, WA

Construction Engineering and Inspection Group Manager Consor Engineers

Construction Engineering and Inspection Group Manager Consor Engineers LLC

Aerospace Quality Inspector - Swing Shift Primus International LLC

QA Inspector II - 2nd Shift Sekisui Aerospace

Quality Control Inspector Zeno Power

Inspector - Rail/Bus Colliers Engineering & Design

Aerospace NDT Inspector - Level 2 - Swing Shift Primus International LLC

Building Inspector III City of Port Orchard

Quality Inspector - Aviation Primus International LLC

Quality Inspector, Mechanical Inspection (2026-076) Astronics

Quality Inspector, Shipping Inspection (2026-075) Astronics

Quality Inspector, Receiving Inspection (2026-077) Astronics

Quality Inspector - Mechanical Inspection Protingent

Inspection Technician/Operator DuPont Electronic Materials CMP

Construction Materials Testing/Inspection Project Manager The Kleinfelder Group Inc

Data Center Audit Compliance Manager - Insurance, Licensing & City Inspections - Michigan Oracle

Fire Systems Inspections Manager Cosco Fire Protection Inc

Service Administrator - Inspections Cosco Fire Protection Inc

Claim Specialist - Property Field Inspection State Farm

Quality Inspector - Electromechanical - GO SQA Services

Residential Home Inspector Pillar To Post

Quality Inspector Starlink Space Exploration Technologies Corp

Transportation Quality Assurance Inspector The Kleinfelder Group Inc

Quality Inspector C - First Shift L3Harris Technologies Inc

Construction Inspector PMCS Group, Inc

Quality Inspector (Starlink) SpaceX

QA Inspector II - 2nd Shift Sekisui Chemical Ltd

Quality Inspector (2026-054) (WA, Kirkland) Astronics Corp

Quality Assurance Inspector B.E. Meyers & Co Inc

Construction Quality Control Inspector - COA Golden Wolf, LLC

Quality Inspector LMI Aerospace Inc

Quality Inspector Sonaca

1 Quality Assurance Inspector WA-0716 Sept 2021 Keltia Design Inc

Quality Inspector 3 Triumph Group Inc

Quality Inspector Insight Global

Quality Inspector Sonaca North America

Construction Quality Control Inspector - COA Golden Wolf

Environmental Compliance Inspector (TE2) State of Washington

Consumer Safety Inspector U.S. Department of Agriculture

L&I Electrical Construction Inspector 1 (In-Training) State of Washington

Building Inspector Bellevue City Council

MASTER PROFILE - Home Inspector Jarquin Team

Construction Inspector (Civil - highways and bridges) Project Solutions Inc.

Construction Inspector II Kleinfelder, Inc.

Construction Inspector Actalent Inc

Lead Construction Inspector - Water/ Wastewater Jacobs

CEI Inspector III Bowman Consulting Group, Ltd.

Construction Inspector (Civil - highways and bridges) Project Solutions

Construction Quality Control /Quality Assurance Inspector Intertek Group Plc

__Quality Inspector / CMM - FEB 2026 Keltia Design Inc

Resume Resources