68 Results for

Inspection Jobs in Mountlake Terrace, WA

Jobs

Seattle, WA27 days ago

Full-time
Employee

While performing the duties of this job, physical demands of the employee may include frequent talking, hearing, standing, moving, walking, stooping, kneeling, crouching, crawling, reaching, handling, grasping, feeling, balancing, coordination, and occasional sitting or operating a company vehicle. • This field job primarily operates in outdoor work environments that may include exposure to inclement weather, heat, humidity, noise, hazard, atmospheric conditions, and bodies of water, depending on project requirements.

Seattle, WA25 days ago

$150,000–$215,000 Per Year
Full-time
Employee

Kent, WA30+ days ago

Full-time
Employee

Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Quality In-Process Inspectors at this level shall demonstrate an expert level of blueprint reading in order to determine critical drawing tolerances and specific finishing requirements directly involving dimensional control, along with the use of advanced measurement equipment such as micrometers, (telescope, dial, and pistol grip) bore gages, and Sunnen PG bore gage, to name a few.

Seattle, WA27 days ago

$20–$40 Per Hour
Full-time
Employee

Person" means (i) a U.S citizen or U.S. national; or (ii) any natural person who is a U.S. Lawful Permanent Resident (i.e., holds a Green Card), as defined by 8 U.S.C. 1101(a)(20) or as a "protected individual" defined by 8 U.S.C. 1324b(a)(3) (i.e., admitted as a refugee or is granted asylum). We are looking for a self-directed QC Inspector to own day-to-day incoming inspection of custom mechanical parts, verify supplier documentation, and build clean inspection records.

Seattle, WA28 days ago

$115,000–$166,400 Per Year
Full-time
Employee

Prepares accurate, complete, and timely Inspector Daily Reports (IDRs) documenting weather, manpower, equipment, work activities, locations, materials placed, quantities, testing performed, deficiencies, and discussions held with the contractor. Ramos CS, now a part of Colliers Engineering & Design, is actively hiring an Inspector to perform a wide variety of field inspection work on a transit capital program covering rail and bus construction scopes.

Woodmont Beach, WA21 days ago

Full-time
Employee

Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Current approvals include the National Aerospace and Defense Contractors Accreditation Program, (NADCAP), Boeing Commercial Aircraft Company, Boeing Defense and Space, Boeing/Philadelphia, Boeing Long Beach, Grumman, Gulfstream, Lockheed Martin, Goodrich, Bombardier, Cessna and Sikorsky among much else.

Port Orchard, WA30+ days ago

Full-time
Employee

Ability to operate a personal computer and related word processing, permitting, and engineering software; perform complex and technical review of construction plans; perform a variety of inspections at construction sites; work independently with little direction; communicate effectively with the public, contractors, developers and co-workers, both orally and in writing; explain technical items and problems in a lay person’s terms, and read, interpret, apply, and explain regulations, codes plans, policies, and procedures. Conduct field inspections of construction projects to ensure compliance with the International Code Council (ICC) Building, Mechanical, Plumbing and Fire Codes, State Energy, Ventilation and Indoor Air Quality and Barrier Free Codes, as well as other state laws and City of Port Orchard Ordinances and policies.

Mill Creek, WA30+ days ago

Full-time
Employee

Actively follow instructions as required in all aspects of the work assignment and have a working knowledge of common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines. Good knowledge of common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines (running PCDMIS software).

Lynnwood, WA27 days ago

Full-time
Employee

American Society for Nondestructive Testing (ASNT) Level III certification (Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT)). General Responsibilities: Construction Inspectors spend the majority of their time working on projects performing construction related inspection requiring specific certifications and/or experience.

Lynnwood, WA27 days ago

Part-time
Employee

Woodinville, WA30+ days ago

Full-time
Employee

To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)).

Lynnwood, Washington30+ days ago

$101,817–$138,945 Per Year

Knowledge: Knowledge of Quality Management Systems as well as Process Improvement and Control Techniques; Demonstrated knowledge of manufacturing best practices, process control, logistics processes (inventory management), engineering management (project management) and safety management . Skills/Abilities: Demonstrated strong analytical and problem-solving skills; Effective written and verbal communication skills and interpersonal skills; Ability to manage through influence; Ability to demonstrate a strong sense of urgency .

Kirkland, WA25 days ago

$21.93–$29.67 Per Hour

Minimum Qualifications** **Education/Experience** + High school diploma or general education degree (GED) + Demonstrates **familiarity** (typically 1 year of direct experience in the duties, responsibilities and skills of the role for consideration as **Quality Inspector** . **Duties & Responsibilities** + Utilize complex measuring devices to perform inspections of purchased parts, materials, components, electronic hardware, and equipment as they are received from vendors or subcontractors, working primarily within the mechanical cell.

Kirkland, WA25 days ago

$21.93–$29.67 Per Hour

Quality Inspector, Shipping Inspection (2026-075) Astronics Subsidiary Astronics Advanced Electronic Systems Location Kirkland, WA Description Astronics Advanced Electronic Systems (AES) is seeking a **Quality Inspector** for our **Shipping Inspection Group** . This role works from blueprints, engineering change notices, and established operating procedures to perform a wide range of inspection activities and to determine acceptance, rejection, or rework requirements at various stages of production.

Kirkland, WA18 days ago

Working from blueprints, engineering change notices, and established operating procedures, you will bridge the gap between engineering specifications and finished hardware, ensuring the integrity of complex mechanical components throughout the production lifecycle. Precision Inspection: Utilize complex measuring devices to perform high-level verification of purchased parts, materials, components, and equipment received from vendors or subcontractors.

Kirkland, WA25 days ago

$21.93–$29.67 Per Hour

Quality Inspector, Receiving Inspection (2026-077) Astronics Subsidiary Astronics Advanced Electronic Systems (AES) Location Kirkland, WA Description Astronics Advanced Electronic Systems (AES) is seeking a **Quality Inspector** for our **Receiving Inspection Group** . **Job Summary** The **Quality Inspector, Receiving Inspection** is responsible for performing incoming inspections of purchased parts, materials, components, electronic hardware, and equipment to ensure they meet Astronics AES quality, engineering, and customer requirements.

Lynnwood, WA30+ days ago

$101,817–$138,945 Per Year

Knowledge: Knowledge of Quality Management Systems as well as Process Improvement and Control Techniques; Demonstrated knowledge of manufacturing best practices, process control, logistics processes (inventory management), engineering management (project management) and safety management. Skills/Abilities: Demonstrated strong analytical and problem-solving skills; Effective written and verbal communication skills and interpersonal skills; Ability to manage through influence; Ability to demonstrate a strong sense of urgency.

Bellevue, Washington30+ days ago

At Qnity, we’re more than a global leader in materials and solutions for advanced electronics and high-tech industries – we’re a tight-knit team that is motivated by new possibilities, and always up for a challenge. Operational Excellence in our workplace unleashes the energy, creativity and collaboration – along with our tools, technology and training – that enables our people to perform at their best.

Everett, WA30+ days ago

Partner with Design, Build Reliability, Manufacturing, and Supplier Development Engineering teams to implement, improve, and sustain inspection processes, tooling, measurement methods, and documentation systems. Since Helions founding in 2013, we have raised over $1 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors SoftBank and Lightspeed to propel us forward.

Redmond, WA30+ days ago

$36.47–$60.86 Per Hour

In addition to the above required competencies and experience, hiring preference will be given to those candidates with the following certifications or experience: Candidates with applicable construction inspection and testing certifications from the American Concrete Institute (ACI), International Code Council (ICC), National Institute for Certification in Engineering Technologies (NICET); the American Welding Society (AWS). This role''s primary function is to ensure Kleinfelder exceeds client expectations through frequent client communication, mentoring and managing Kleinfelder''s local CoMET services team, planning and executing technical work, monitoring, and controlling project budgets, and working to expand our client base.

Tukwila, WA18 days ago

$80,000–$120,000 Per Year

The Fire Systems Inspection Manager is responsible for overseeing and managing all inspection activities related to fire sprinkler, fire alarm, and life safety systems, while also supporting revenue growth through new sales, customer retention, contract renewals, and identification of inspection- and deficiency-driven sales opportunities. COSCO Fire Protection is a multifaceted, full-service fire sprinkler and life safety systems company specializing in the installation, service, and inspection of a wide variety of automatic fire sprinkler systems, fire alarm (life safety) systems, kitchen suppression, extinguishers, and special hazard systems throughout the West Coast.

Tukwila, WA18 days ago

$25–$30 Per Hour

We are seeking a motivated and engaging person who enjoys multi-tasking, learning on the job, and providing simultaneous support in a service and administrative capacity. Essential duties and responsibilities may include, but are not limited to, the following: Schedule inspections work orders to ensure they are completed on time.

Seattle, WA7 days ago

$64,965.62–$99,000 Per Year

Competitive candidates should reside within one of the listed zip codes and will service this same territory: 98001, 98002, 98003, 98023, 98030, 98031, 98032, 98042, 98056, 98057, 98101, 98102, 98104, 98106, 98108, 98109, 98812, 98116, 98118, 98119, 98121, 98122, 98126, 98134, 98136, 98144, 98146, 98148, 98158, 98166, 98168, 98178, 98188, 98198, 98199. With the opportunity to initially earn up to 20 days annually plus parental leave, paid holidays, celebration day, life leave (40 hours/year), bereavement leave, and community service/education support days, there will be plenty of time for you!

Seattle, Washington21 days ago

Over 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information.

Marysville, Washington30+ days ago

$21–$21

Have a sincere desire to work and be able to work independently or with a team to complete tasks in a timely manner.2+ years relevant, steady work history is preferred, manufacturing a plus. Job duties include but are not limited to:Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order.

Marysville, Washington30+ days ago

$17.19–$27.01

Other Skills: Ability to use precision measuring instruments and to read engineering drawings, specifications and other technical literature is preferred. Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order.

Marysville, Washington30+ days ago

$18.90–$29.70

Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order. Inspects sub-assemblies used in the construction of aircraft interiors and all final products prior to shipment.

Seattle, Washington30+ days ago

Known as North America’s largest home inspection company, Pillar To Post provides comprehensive training, proven systems, advanced tools, and strong internal support to help inspectors succeed. As a Residential Home Inspector, you will help home buyers, sellers, and real estate professionals make informed decisions by delivering thorough, high-quality inspections and detailed reports.

Redmond, WA30+ days ago

$25–$33 Per Hour

PREFERRED SKILLS AND EXPERIENCE: • Understanding of ISO 9001/AS9100 quality management systems • Solid computer skills in Microsoft Word, Outlook and Excel • Ability to review drawings and identify improper callouts/datum structures, according to ASME Y14.5 • Thorough understanding of all layout inspection tools (surface plate, height gage, indicators, calipers, micrometers, gage blocks, thread gages, etc.). BASIC QUALIFICATIONS: High school diploma or equivalency certificate 2+ years of quality inspection experience in a machine shop or manufacturing environment 1+ years of experience with blueprint reading and/or GD&T (geometric dimensioning and tolerancing).

Redmond, WA30+ days ago

$30.39–$50.72 Per Hour

From construction management and observation/inspection services to laboratory testing and materials and forensic engineering, our Construction Services market helps to develop and maintain America''s infrastructure and supply chain and is a recognized industry leader with more than 25 accredited laboratories. Kleinfelder, a long-standing industry leader in the Puget Sound area, provides Transportation Quality Assurance Inspection and Testing Services to transportation agency clients in Washington State.

Redmond, WA30+ days ago

$25–$33 Per Hour

unassisted + Must be able to stand for extended periods - 8 hours min + Willingness to work overtime and weekends when needed to meet critical deadlines + Up to 50% travel COMPENSATION AND BENEFITS: Pay range: Quality Inspector/Level 1: $25.00 - $33.00/hour Quality Inspector/Level 2: $30.00 - $39.00/hour Quality Inspector/Level 3: $35.00 - $45.00/hour ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Redmond, WA30+ days ago

$25–$46.63 Per Hour

Job Title: Quality Inspector C Job Code: 35432 Job Location: Onsite at our Redmond, WA facility Job Schedule: 4/10 - Employees work 8 out of every 14 days - totaling 80 hours worked - and have every Friday off Shift: 1st shift. With customers mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.

Everett, WA21 days ago

$37,800–$59,400 Per Hour

Reference number** 2025-160817 **Job details** **Domain** Production **Job field / Job profile** Quality - development quality assurance (design / industrial engineering / tools/ support and services) **Job title** Quality Inspector 2 **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Northwest Aerospace Technologies ("NAT"), a Safran Company, is the only EASA DOA Certified aircraft interior reconfiguration group in the United States. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

Everett, WA25 days ago

$35,760–$56,190 Per Year

Annual salary** USD 35,760 - 56,190 **Job location** **Job location** North America, United States, Washington, Everett **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

Redmond, WA27 days ago

Is responsible for conducting incoming receiving inspections to IPC-A-610 class 3. Performs first article inspections (FAI) to AS9100, line inspections, finished goods and pack out inspections and audits on electronic, mechanical, and optic systems, subassemblies, and parts to ensure said items meet critical specifications. Understands and follows inspection plans, work orders, test manuals, performance specifications, wiring diagrams, shop drawing prints and schematics to determine, validate or comply with specification, testing procedure and equipment to be used.

Marysville, WA25 days ago

$35,760–$56,190 Per Year

Company : Safran Cabin Job field : Quality Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Technician Spoken language(s) : English Fluent Salary range : USD 35,760 - 56,190 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

Marysville, WA20 days ago

$17.19–$27.01 Per Hour

Company : Safran Cabin Job field : Quality Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : First experience Professional status : Technician Spoken language(s) : English Fluent Salary range : USD $17.19/hr - $27.01/hr ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

Marysville, WA30+ days ago

$39,310–$61,780 Per Year

Company : Safran Cabin Job field : Quality Location : Marysville , Washington , United States Contract type : Permanent Contract duration : Full-time Required degree : High School Diploma/GED Equivalent Required experience : More than 3 years Professional status : Employees / Staff Spoken language(s) : English Fluent Salary range : USD $39,310.00 -$61,780.00 ITAR : ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

Kent, WA30+ days ago

This role provides comprehensive construction management support for the Tahoma National Cemetery major construction project, which develops 15 of the 36 undeveloped acres remaining at Tahoma National Cemetery, adding an additional 15 years of burial services for eligible veterans in the Puget Sound region of Washington state. Inspections & quality control: Conduct daily site and building inspections; document defects, code violations, improper materials/techniques, and punch list items; observe contractor/subcontractor work for compliance and report findings to the SRE.

Redmond, WA30+ days ago

$28.33–$40 Per Hour

Maintains product quality documentation by keeping accurate records and files; such as Material Certifications, First Article Inspection Reports (AS9102), Inspection Method Sheets (IMS), First Piece Inspection. Ensures adherence to applicable Triumph Group internal, federal, state and local laws and regulations related to compliance and takes responsibility to ensure ongoing conformity with such rules and regulations.

Renton, WA14 days ago

Skills and Requirements - Advanced blueprint reading skills - Able to use hand inspection tools (Calipers, 6" scales, height gage, etc.) - Advanced math aptitude - Able to support inspection functions in multiple work centers - Knowledge of industry record keeping procedures and best practices - Familiar with digital, electronic inspection media - Analytical and problem-solving skills, with the ability to identify root cause, and suggest corrective and continuous improvement actions - Interpersonal skills and the ability to work effectively with a wide range of people in a diverse workforce - 1-3 years of quality inspection experience in an aerospace manufacturing environment strongly preferred - Lean Manufacturing experience - Knowledgeable in autoclaves and/or ovens Additionally, you will document non-conformities on company rejection tags and inspection pick-up forms, provide information and assistance to production and supervisory personnel, and verify kits in final inspection before shipping.

Marysville, WA30+ days ago

$39,310–$61,780 Per Year

Annual salary** USD $39,310.00 - $61,780.00 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.

Everett, WA17 days ago

Job Duties and Responsibilities: Performs first part, in-process, first article, and final inspections by utilizing surface plates, coordinate measuring machines (CMM), calipers, bore gages, micrometers, height gages, and other precision measuring devices, instruments, and equipment. Ensures that material traceability, processing certification, assembly and testing of customer-furnished, vendor-supplied products or work in progress meet internal and customer requirements.

Everett, WA30+ days ago

$25–$30 Per Hour

Key Responsibilities: - Mechanical and Cosmetic inspection - Provide Quality control activities including new product introduction - Provide inspection services for incoming goods, returns and assembly - Document non-conformances and report major quality issues to leadership - First Article inspection Skills and Experience: - It is essential that the successful candidate have solid inspection experience gained in a manufacturing environment. Quality Inspector Location: Everett, WA Job ID: #71789 Pay Range: $25-30 ONLY UP TO 8 WEEK Contract Job Description The company is offering an exciting opportunity for an Quality Inspector to join our fast-paced and innovative team.

Everett, WA21 days ago

$45,750–$71,890 Per Year

Able to inspect parts using gauges, scales, micrometers, calipers, height gauges and other hand tools -Able to document findings and fill out First Article Reports (FAI's) using the AS9102 forms -Able to write non-conformance tags for discrepant parts -Work independently with little supervision -Exhibit ethical independence and judgment of the parts and process -7 or more years' experience in mechanical inspection with focus on aerospace and manufacturing environment -Any other duties as assigned by the Quality Supervisor or Manager -The Q.A. **Reference number** 2025-163366 **Job details** **Domain** Production **Job field / Job profile** Quality - Development project quality assurance **Job title** Quality Inspector 3 **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Northwest Aerospace Technologies ("NAT"), a Safran Company, is the only EASA DOA Certified aircraft interior reconfiguration group in the United States.

Kent, Washington30+ days ago

This role provides comprehensive construction management support for the Tahoma National Cemetery major construction project, which develops 15 of the 36 undeveloped acres remaining at Tahoma National Cemetery, adding an additional 15 years of burial services for eligible veterans in the Puget Sound region of Washington state. Our people are our strength—we combine technical expertise, mission understanding, and operational excellence to deliver superior outcomes across the U.S. We take pride in improving operational effectiveness, resilience, and sustainability for complex facilities through informed strategy, innovative engineering, and exceptional performance.

Arlington, WA29 days ago

Proficient in operating coordinate measuring machines (CMM) / Romer arms for automated quality inspections + Performs inspections and tests per QC Manual, QA Manual, procedures, instructions, drawings, and travelers at specified stages in production process + Inspects and/or tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics + Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality of products or materials + Records inspection and test data + Evaluates inspection and/or test data and writes reports to validate or indicate deviations from existing manuals, procedures, instructions, drawings, or travelers + Recommends modifications of existing quality or production manuals, procedures, instructions, drawings, or travelers to achieve optimum quality within limits of equipment capability + Sets up and performs nondestructive tests on materials, parts, or products to measure performance or material characteristics, as applicable ABW is a leader in the Aerospace, Defense, Nuclear and Energy industries. Our diversity allows us to maintain a prominent level of fabrication production during any downturn or difficult time.

Seattle, WA20 days ago

$56,715–$90,190 Per Year

In addition to the qualifications above, experience must include working with the Federal Meat, Poultry, and Egg Products Inspection Acts in order to inspect meat, poultry and egg products; working with basic SSOP and HACCP principles and practices in order to verify plant HACCP and SSOP responsibilities; performing basic mathematics and elementary statistical concepts and methods to perform testing and sampling procedures; and experience in reaching and interpreting conclusions. Surplus or displaced employees eligible for CTAP, RPL, or ICTAP priority must provide: proof of eligibility (RIF separation notice, notice of proposed removal for declining a transfer of function or directed reassignment to another commuting area, notice of disability annuity termination), SF-50 documenting separation (as applicable), current performance appraisal with rating of at least "Fully Successful" or equivalent, and your most recent SF-50 noting position, grade level, and duty location with your application per 5 CFR 330.

Seattle, WA25 days ago

$6,253.75–$8,412.58

In addition to maintaining over 20,000 lane miles of state highway and 4,100 bridges, WSDOT leads an award-winning Active Transportation Plan, manages the worlds longest floating bridge, and operates the largest ferry system in the nation! Full-time employees who work full monthly schedules qualify for holiday compensation if they are employed before the holiday and are in pay status for at least 80 nonovertime hours during the month of the holiday; or for the entire work shift preceding the holiday.

Kirkland, WA30+ days ago

$24.52–$36.79 Per Hour

The Senior / Specialist Quality Inspector will work from blueprints, engineering change notices, or established operating procedures to perform a wide range of inspection procedures and determine acceptance, rejection, or rework requirements at various stages of production. Utilize complex measuring devices to perform inspections of purchased parts, materials, components, electronic hardware, and equipment as they are received from vendors or subcontractors, working primarily within the mechanical cell.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Inspection job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

Inspection Jobs in Mountlake Terrace, WA

Construction Engineering and Inspection Group Manager Consor Engineers

Construction Engineering and Inspection Group Manager Consor Engineers LLC

Aerospace Quality Inspector - Swing Shift Primus International LLC

Quality Control Inspector Zeno Power

Inspector - Rail/Bus Colliers Engineering & Design

Aerospace NDT Inspector - Level 2 - Swing Shift Primus International LLC

Building Inspector III City of Port Orchard

CMM Inspector Days Bothell Primus International LLC

Senior Construction Inspector Terracon Consultants, Inc.

Senior Construction Inspector (Part-Time) Terracon Consultants, Inc.

Quality Inspector - Aviation Primus International LLC

Quality Inspection Supervisor ELDEC Aerospace

Quality Inspector, Mechanical Inspection (2026-076) Astronics

Quality Inspector, Shipping Inspection (2026-075) Astronics

Quality Inspector - Mechanical Inspection Protingent

Quality Inspector, Receiving Inspection (2026-077) Astronics

Inspection Supervisor Crane Pumps & Systems Inc

Inspection Technician/Operator DuPont Electronic Materials CMP

Inspection Supervisor Helion Energy Inc

Construction Materials Testing/Inspection Project Manager The Kleinfelder Group Inc

Fire Systems Inspections Manager Cosco Fire Protection Inc

Service Administrator - Inspections Cosco Fire Protection Inc

Claim Specialist - Property Field Inspection State Farm

Quality Inspector - Electromechanical - GO SQA Services

Quality Inspector 1 Safran Cabin Materials, LLC

Quality Inspector 1 Safran Cabin Inc.

Quality Inspector 2 Safran Cabin Inc.

Residential Home Inspector Pillar To Post

Quality Inspector Starlink Space Exploration Technologies Corp

Transportation Quality Assurance Inspector The Kleinfelder Group Inc

Quality Inspector (Starlink) SpaceX

Quality Inspector C - First Shift L3Harris Technologies Inc

Quality Inspector 2 Safran

Quality Inspector 1 - SCI Safran

Quality Assurance Inspector B.E. Meyers & Co Inc

Quality Inspector 1 Safran SA

Quality Inspector 1 - SCI Safran SA

Quality Inspector Level 2 - SCI Safran SA

Construction Quality Control Inspector - COA Golden Wolf, LLC

Quality Inspector 3 Triumph Group Inc

Quality Inspector Insight Global

Quality Inspector Level 2 - SCI Safran

QA Inspector - Aerospace 12/2018 Keltia Design Inc

Quality Inspector Butler America

Quality Inspector 3 Safran

Construction Quality Control Inspector - COA Golden Wolf

Quality Control Inspector 11 ABW Technologies, Inc.

Consumer Safety Inspector U.S. Department of Agriculture

Environmental Compliance Inspector (TE2) State of Washington

Quality Inspector (2026-054) (WA, Kirkland) Astronics Corp

Resume Resources