Safety Inspector (Biweekly Inspections) Infinite Consulting CorpSafety Inspector (Biweekly Inspections)New York, NY$55–$60 / hourAttention: Infinite Consulting Corp applicants, please note that all official company correspondence will come from an Infinite Consulting Corp representative that can be verified with an official company email address. New York City Equal Pay Disclaimer Infinite Consulting Corp carefully considers multiple factors to determine compensation, including a candidate’s experience, education, and training.
Staff Metrology & Inspection Engineer ZT SystemsStaff Metrology & Inspection EngineerSecaucus, NJ$93,000–$136,400 / yearPlease be aware that certain positions may require the applicant to either 1) be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or 2) be eligible to obtain an export control license or license exception from the Bureau of Industry and Science & U.S. Department of Commerce. Metrology Engineer supports manufacturing and quality operations by developing, executing, and sustaining measurement and inspection methods used to verify product compliance to engineering drawings, specifications, and CTQ requirements.
Lead NDT Inspection Engineer (Gas Turbine Components) GE VernovaLead NDT Inspection Engineer (Gas Turbine Components)Parsippany, New Jersey$98,000–$164,000 / yearRole Summary: The Lead NDT Inspection Engineer will serve as the technical subject matter expert (SME) for Non-Destructive Testing (NDT) processes and material quality oversight, specifically supporting the production and industrialization of Gas Turbine components—including blades and nozzles. This posting is expected to remain open for at least seven days after it was posted on June 23, 2026.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services.
NewAutomated Optical Inspection Engineer Element Solutions Inc.Automated Optical Inspection EngineerPiscataway, NJ$95,406–$143,108 / yearYour daily tasks may include analyzing inspection results, optimizing detection parameters, collaborating with process engineers and production staff, and troubleshooting technical issues to minimize false positives and negatives. Programming & Maintenance: Program and operate AOI machines to detect defects such as misaligned components, surface finish flaws, dimensional (3D) defects, and other quality concerns.
Field Quality Verifier (Building Inspections / Energy Efficiency) Harris Energy SolutionsField Quality Verifier (Building Inspections / Energy Efficiency)New York City, New YorkThe Inspector will perform on-site heat pump, air-sealing, and attic-insulation inspections at multifamily properties, document conditions with photos and video, and produce post-inspection reports. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning.
Global Pharmacovigilance Quality Audit & Inspection Readiness Coordinator - VIE Contract SanofiGlobal Pharmacovigilance Quality Audit & Inspection Readiness Coordinator - VIE ContractMorristown, NJActive involvement in the organization of appropriate support for the preparation, conduct and follow-up of Global Quality audits, Business Partner, or Service Provider audits impacting global PV processes, until closure, e.g. Enjoy opportunities to collaborate beyond your area of expertise, working with diverse teams across science, clinical, and digital fields to spark new ideas and drive breakthroughs.
Director, Digital Audit, Inspection & Continuous Improvement PfizerDirector, Digital Audit, Inspection & Continuous ImprovementNew York City, NY$176,600–$294,300 / yearThe Director, Digital Audit, Inspection & Continuous Improvement role will be responsible for implementation and execution of the full range of CGRC services to Digital lines, partner with senior leaders of the organizations and engage with their leadership teams to develop and implement a comprehensive compliance strategy based on risk. In support of the development and delivery of Digital services and Digital supported solutions, provide risk management direction, compliance event management, periodic review, inspection readiness, and all other CGRC activities as needed in accordance with the Digital Process Framework.
Senior Inspections Manager - Gateway Hudson Tunnel Project Parsons Commercial Technology Group Inc.Senior Inspections Manager - Gateway Hudson Tunnel ProjectNew York, NY$125,100–$225,200 / yearThe Gateway Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel.
Senior Inspections Manager - Gateway Hudson Tunnel Project Parsons CorpSenior Inspections Manager - Gateway Hudson Tunnel ProjectNewark, NJ$125,100–$225,200 / yearThe Gateway Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel.
Bridge Engineer / Bridge Inspection Team Leader GFT Infrastructure IncBridge Engineer / Bridge Inspection Team LeaderEast Brunswick, NJ$104,000–$156,000 / yearWhether working on highways and bridges or traffic engineering, our team excels in resilient, sustainable design and construction, delivering innovative solutions that address the complexities of modern, multimodal roadway systems and ensure safe, efficient, and reliable travel for all. In this capacity, the successful candidate will be responsible for the following: Conducting safety inspections of in-service bridges and tunnels and preparing written reports on structural conditions.
Bridge Inspection Team Leader GFT Infrastructure IncBridge Inspection Team LeaderNew York, NY$105,000–$135,000 / yearWhether working on highways and bridges or traffic engineering, our team excels in resilient, sustainable design and construction, delivering innovative solutions that address the complexities of modern, multimodal roadway systems and ensure safe, efficient, and reliable travel for all. In this capacity, the successful candidate will be responsible for the following: Conducting safety inspections of in-service bridges and tunnels and preparing written reports on structural conditions.
Pre-Inspection Specialist U-Haul International IncPre-Inspection SpecialistNorth Bergen, NJ$19.50–$21.50 / hourThe states in which U-Haul will decline to hire nicotine users are: Alabama, Alaska, Arizona, Arkansas, Delaware, Florida, Georgia, Hawaii, Idaho, Iowa, Kansas, Maryland, Massachusetts, Michigan, Nebraska, Pennsylvania, Texas, Utah, Vermont, Virginia, and Washington. Physical Demands: The work requires some physical exertion, such as long periods both indoors and outdoors while remaining stationary, traversing spaces, repositioning to reach and use tools, and moving a minimum of 50 lbs.
Bridge Inspection Trainee Thornton TomasettiBridge Inspection TraineeNew York, New YorkIndividuals seeking employment at Thornton Tomasetti are considered without regards to age, ancestry, color, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, race, religion (including beliefs and practices or the absence thereof), sexual orientation, military or veteran status, or any other characteristic protected by federal, state, or local laws. An independent organization of creative thinkers and innovative doers collaborating from offices worldwide, our mission is to bring our clients' ideas to life and, in the process, lay the groundwork for a better, more resilient future.
Automated Inspection Programmer / Metrologist Micro Stamping CorporationAutomated Inspection Programmer / MetrologistSomerset, New JerseyWhile performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms and talk or hear. The Automated Inspection Programmer develops, maintains and continuously improves measurement systems and equipment to ensure the quality of products and processes.
Inspections Engineer M&J EngineeringInspections EngineerNew Hyde Park, New YorkSince its inception in 2004, M&J has grown into diversified provider of engineering, construction management, construction inspection, technology, and environmental services to a broad range of clients, including federal, state and city/local agencies, private owners, architects, engineers and contractors. M&J Engineering is a leader in construction management and inspection, ITS, mechanical, electrical, wastewater, water supply, tunnel airport, port, marine/coastal, environmental engineering, and design-build services for both new infrastructure projects and renovations.
Assistant Team Leader Trainee - Bridge Inspection HNTB CorporationAssistant Team Leader Trainee - Bridge InspectionNew York, New YorkReceives on-the-job training, observes the work of contractors to ensure quality control and contract compliance for roadway, structure, and bridge construction projects, under the direction of a Construction Manager or their designee. Staffing/employment agencies who have fee agreements with HNTB must submit applicants to the designated HNTB recruiter to be eligible for placement fees.
Director, Data Management Process, Quality & Inspection Readiness Regeneron PharmaceuticalsDirector, Data Management Process, Quality & Inspection ReadinessTarrytown, NY$183,100–$305,200 / yearThe position serves as the primary Data Management lead for health authority inspections and audits, accountable for inspection preparation, response coordination, functional representation, and ensuring teams are prepared to effectively represent the function during regulatory inspections. Demonstrated experience supporting multiple health authority inspections across different health authorities (e.g., FDA, PMDA, MHRA, EMA, etc. ) including inspection preparation, response coordination, remediation activities, and functional representation during regulatory inspections.
Stormwater Inspection Team Lead AqualisStormwater Inspection Team LeadMount Olive, New JerseyThe Stormwater Inspector Lead reports to the Business Development Manager, New Jersey Office and performs field inspections, documents site conditions, identifies maintenance and repair needs, prepares reports with the support of the AQUALIS Compliance team, and communicates findings to clients and internal stakeholders. AQUALIS is a nationwide leading provider of water resource management focused on maintaining, inspecting, rehabilitating and repairing post-construction stormwater, wastewater and freshwater systems—providing our clients with environmental compliance while inspiring change by preserving and protecting our most precious natural resource…water.
Incoming Medical Devices Inspection Technician Macpower Digital Assets Edge Private LimitedIncoming Medical Devices Inspection TechnicianNew York, NY$22–$26 / hourActing as the gatekeeper for quality, you will verify that every component, from screws to electronic parts, complies with precise specifications and safety requirements, supporting the production of critical medical devices. Accurately document test data, organize and summarize inspection results, and prepare reports following Good Documentation Practices (GDP).
NewAutomated Optical Inspection Engineer Element Solutions IncAutomated Optical Inspection EngineerPiscataway, NJ$95,406–$143,108 / yearYour daily tasks may include analyzing inspection results, optimizing detection parameters, collaborating with process engineers and production staff, and troubleshooting technical issues to minimize false positives and negatives. Programming & Maintenance: Program and operate AOI machines to detect defects such as misaligned components, surface finish flaws, dimensional (3D) defects, and other quality concerns.