Maryland State Inspector/Automotive Technician Passport AutoMaryland State Inspector/Automotive TechnicianCamp Springs, MD$20–$45 / hourFull timeWe are Washington DC's fastest growing auto group which means to you, more state inspections than you will be able to handle. If you are ready to go to work with a great attitude, work well with others and are prepared to stay busy all day.
NewCWI/Structural Steel Inspector Hillis-CarnesCWI/Structural Steel InspectorAnnapolis Junction, MDFull timeHillis-Carnes Engineering Associates is a top tier, multi-disciplined engineering firm with advanced capabilities in geotechnical and geo-structural engineering, environmental consulting, specialty construction, construction materials engineering and testing, and third-party inspections. We've been in the business for over 30 years, have expanded to 20 locations, AND for the past 4 years, Engineering News-Record named our company to its ranking of Top 500 Design Firms in the NATION for our continued rapid success and growth.
Construction Inspector (TET III – TET V) Whitman, Requardt & Associates, LLPConstruction Inspector (TET III – TET V)Baltimore, MD$20–$70 / hourFull timeCandidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.
Construction Inspector (TET II – TET V) Whitman, Requardt & Associates, LLPConstruction Inspector (TET II – TET V)Baltimore, MD$20–$70 / hourFull timeCandidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.
Department of Public Works Inspector Trainee Whitman, Requardt & Associates, LLPDepartment of Public Works Inspector TraineeBaltimore, MDFull timeWe are looking for Construction Inspector Trainees to join our growing team supporting Baltimore City’s Department of Public Works (DPW) . Entry-level inspection work will be in one of the following Public Works areas:Water & Sewer Pipeline New Installations.
Maryland State Inspector/Automotive Technician Passport Auto GroupMaryland State Inspector/Automotive TechnicianSuitland, MDFull timeIf you are ready to go to work with a great attitude, work well with others and are prepared to stay busy all day. Automotive Technician 20 per flat rate hour up to 45 per flat rate hour potential.
Quality Control Inspector Hydrasearch Company LLCQuality Control InspectorStevensville, MD$22–$30 / hourPart timeYou will be responsible for reviewing supplier documentation to ensure total conformance to purchase requirements and will play a key role in communicating technical findings to both production and quality personnel to ensure operational excellence. In this role, you will support manufacturing operations by verifying that all incoming materials, in-process work, and finished products strictly meet defined engineering and quality requirements.
Construction Quality Control Inspector IQUASAR LLCConstruction Quality Control InspectorLaurel, MDReview contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.
Facilities Maintenance Quality Control Inspector CBRE Government & Defense ServicesFacilities Maintenance Quality Control InspectorAnnapolis, MarylandThe inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes.
Electrical Quality Control (QC) Inspector M.C. Dean IncElectrical Quality Control (QC) InspectorBaltimore, MD$35.50–$39.50 / hourPerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
Electrical Quality Control Inspector M.C. Dean, IncElectrical Quality Control InspectorBaltimore , Maryland$35.50–$39.50 / hourFull timePerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
Construction Quality Control Inspector CbConstruction Quality Control InspectorLaurel, MarylandReview contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.
Mechanical Inspector Arcadis NVMechanical InspectorHanover, MD$114,000–$145,600 / yearThe MEP Inspector will support a variety of industrial and commercial construction projects that may include pre-construction, construction, start-up/commissioning, and coordination with electrical power distribution systems, conduit and wiring; voice/tele/data systems; instrumentation and control systems. The Electrical Inspector will assist the project team in identifying deficient work performed by the General Contractor (GC) and its subcontractors, review submittals and look-ahead schedules, perform equipment inspections, and manage deficiency logs via Procore.
Quality Control Inspector Dixon Valve & Coupling CoQuality Control InspectorMD$22–$30 / hourYou will be responsible for reviewing supplier documentation to ensure total conformance to purchase requirements and will play a key role in communicating technical findings to both production and quality personnel to ensure operational excellence. In this role, you will support manufacturing operations by verifying that all incoming materials, in-process work, and finished products strictly meet defined engineering and quality requirements.
Incoming Quality Control IQC Inspector III - Mechanical Rocket Lab CorpIncoming Quality Control IQC Inspector III - MechanicalMiddle River, MD$26–$33 / hourImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Facilities Maintenance Quality Control Inspector J & J Maintenance, Inc.Facilities Maintenance Quality Control InspectorAnnapolis, MD$65,000–$85,000 / yearThe inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes.
Quality Control Inspector Oceaneering International IncQuality Control InspectorHanover, MD$33.22–$49.86 / hourAbility to read drawings, comprehend specifications and tolerances, read dial indicators and digital gages, compare results with specifications and record test data, confer with engineers, technicians and production personnel as necessary. The candidate must be able to read dials and displays, compare results with specifications and record test/inspection data, confer with engineers, technicians and production personnel.
Incoming Quality Control (IQC) Inspector III – Mechanical Rocket Lab CorporationIncoming Quality Control (IQC) Inspector III – MechanicalMiddle River, MD$26–$33 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Senior Incoming Quality Control Inspector Rocket Lab CorpSenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Senior Incoming Quality Control Inspector Rocket Lab CorporationSenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Construction QA Inspector ASR International CorpConstruction QA InspectorLaurel, MDASR is seeking experienced Construction Quality Assurance (QA) Inspectors to ensure contractor implementation of an effective Quality Control program and verify that all work is in strict compliance with contract documents on construction, alteration, and repair projects at the USSS James J. Rowley Training Center (JJRTC) in Laurel, MD. Founded in 1986 and headquartered in Long Island, NY, ASR serves its clients with a full spectrum of complex professional and technical support services including Construction Management, Engineering, Logistics, Project Management and Quality Control across the U.S. and in more than 40 countries worldwide.
Construction QA Inspector ASR INTERNATIONALConstruction QA InspectorLaurel, MDFull timeASR is seeking experienced Construction Quality Assurance (QA) Inspectors to ensure contractor implementation of an effective Quality Control program and verify that all work is in strict compliance with contract documents on construction, alteration, and repair projects at the USSS James J. Rowley Training Center (JJRTC) in Laurel, MD. Founded in 1986 and headquartered in Long Island, NY, ASR serves its clients with a full spectrum of complex professional and technical support services including Construction Management, Engineering, Logistics, Project Management and Quality Control across the U.S. and in more than 40 countries worldwide.
MCPP - Quality Inspector - Engineer (Construction) Equipment KBR IncMCPP - Quality Inspector - Engineer (Construction) EquipmentMDAnalyze and display Global Combat Support Systems Marine Corps (GCSS-MC), and Marine Corps Preposition Information Center (MCPIC) data to ensure that equipment is ready for delivery to the customer. Completed applicable maintenance related training through progression in rank (Journeyman School, Intermediate Maintenance Training for NCO's/SNCO's, Chief School).
MCPP: Quality Inspector (Ordnance/Heavy Equipment) KBR IncMCPP: Quality Inspector (Ordnance/Heavy Equipment)MDAnalyze and display Global Combat Support Systems Marine Corps (GCSS-MC), and Marine Corps Preposition Information Center (MCPIC) data to ensure that equipment is ready for delivery to the customer. Completed applicable maintenance related training through progression in rank (Journeyman School, Intermediate Maintenance Training for NCO's/SNCO's, Chief School).
Aviation Safety Inspector (Air Carrier Maintenance), Partial Program Manager, Powerplant U.S. Department of TransportationAviation Safety Inspector (Air Carrier Maintenance), Partial Program Manager, PowerplantWashington, DC$107,446–$139,684 / yearMedical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements: Have good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain; Have the ability to hear the conversational voice (hearing aid permitted); Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft. When the predominant work involves air carrier avionics applicants for Aviation Safety Inspector(Maintenance) positions must meet all of the following requirements: Experience involving the maintenance and repair of airframes, power plants, and systems of multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight maintained under an airworthiness maintenance and inspection program.
Construction Inspector (FN) The Kenjya-Trusant Group , LLCConstruction Inspector (FN)Fort Meade, MD$90,000–$105,000 / yearWorking with the Department of Defense, Department of Homeland Security, the Intelligence Community, state and local governments, and commercial clients, Kenjya-Trusant provides cyber protection, information technology, engineering, construction management and acquisition support services. Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Quality Inspector II React Health HoldingsQuality Inspector IIWashingtonEmployees typically sit comfortably to do their work, interspersed by brief periods of standing, walking, bending, carrying papers and books, and extensive periods requiring the use of computer terminals to accomplish work objectives. Your day-to-day duties include but are not limited to measuring objects compared to their intended physical specifications, identifying defects, running quality tests, and performing other verification activities.
Inspector - Rail/Bus Colliers Engineering & DesignInspector - Rail/BusWashington$115,000–$166,400 / yearFull timePrepares accurate, complete, and timely Inspector Daily Reports (IDRs) documenting weather, manpower, equipment, work activities, locations, materials placed, quantities, testing performed, deficiencies, and discussions held with the contractor. Overview: Ramos CS, now a part of Colliers Engineering & Design, is actively hiring an Inspector to perform a wide variety of field inspection work on a transit capital program covering rail and bus construction scopes.
Senior Construction Inspector (FN) The Kenjya-Trusant Group , LLCSenior Construction Inspector (FN)Fort Meade, MD$110,000–$125,000 / yearWorking with the Department of Defense, Department of Homeland Security, the Intelligence Community, state and local governments, and commercial clients, Kenjya-Trusant provides cyber protection, information technology, engineering, construction management and acquisition support services. Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Construction QA Inspector Asr InternationalConstruction QA InspectorLaurel, MarylandASR is seeking experienced Construction Quality Assurance (QA) Inspectors to ensure contractor implementation of an effective Quality Control program and verify that all work is in strict compliance with contract documents on construction, alteration, and repair projects at the USSS James J. Rowley Training Center (JJRTC) in Laurel, MD. Founded in 1986 and headquartered in Long Island, NY, ASR serves its clients with a full spectrum of complex professional and technical support services including Construction Management, Engineering, Logistics, Project Management and Quality Control across the U.S. and in more than 40 countries worldwide.
NewQuality Control Inspector (Custodial Operations - AM Shift) Chimes District of Columbia, IncQuality Control Inspector (Custodial Operations - AM Shift)Fort George G Meade, MDPart timeProvide and maintain a quality control program directly related to Chimes District of Columbia required training programs and approved by the site contracting office, Chimes District of Columbia management, and building management. · Minimum two (2) years’ experience within the past five (5) years in performing quality control inspections or managing a quality control program for similar services.
NewQUALITY INSPECTOR - A Northrop Grumman CorpQUALITY INSPECTOR - AMD$48,459–$112,669 / yearA Quality Inspector performs complete quality inspection operations on a variety of purchased or manufactured materials, hardware, electrical components, electro-mechanical assemblies/systems and manufacturing processes using drawings, military specifications, process specifications and contractual requirements as well as internal (PROP) procedures that are applicable. Customer and government (DCMA) interface are required for in-process inspections through final inspections as well as contract end item submittals and final pack/shipping processes.
NewQUALITY INSPECTOR - B Northrop Grumman CorpQUALITY INSPECTOR - BMD$44,825–$98,131 / yearA Quality Inspector performs complete quality inspection operations on a variety of purchased or manufactured materials, hardware, electrical components, electro-mechanical assemblies/systems and manufacturing processes using drawings, military specifications, process specifications and contractual requirements as well as internal (PROP) procedures that are applicable. Customer and government (DCMA) interface are required for in-process inspections through final inspections as well as contract end item submittals and final pack/shipping processes.
Fiber Quality Inspector Parsons CorpFiber Quality InspectorMDWhat Youll Be Doing: • Conduct regular on-site fiber quality inspections for all work performed by Project personnel, Contractors and Sub-Contractors to ensure compliance with all contractual requirements; • Provide oversight of the Project Quality Plan. What Required Skills Youll Bring: • A minimum of a bachelor's degree in business, engineering, environmental sciences, or related field (or equivalent)plus a minimum 4 years demonstrable experience in system safety and/or construction safety.
NewNF Inspector Sims LtdNF InspectorBaltimore, MDTo achieve our purpose to create a world without waste to preserve our planet, we are guided by our Principles of Purpose: Be Safe + Well, Band Together, Be Accountable + Transparent, Consistently Innovate, Inspire with Purpose, Celebrate + Have Fun. As a responsible corporate citizen, we continuously seek new ways to broaden our participation in the environmental sector, ensuring that our future is as bright, safe, and secure as at any time in our long history.
U107 Inspector B Assembly Northrop Grumman CorpU107 Inspector B AssemblyBaltimore, MDPerform the duties of Inspector C and in addition: Determine and utilize inspection procedures, set-up necessary inspection tools and equipment where fixtures are not provided such as: measuring microscope, Rockwell hardness tester, profilometer, height gauge, Cadillac gauge, dial indicator, parallel bars, right angle knee, gauge blocks, precision pins, bench center, V blocks, sine bar, surface plate, optical comparator (shadow graph) computer-aided measuring equipment, laser measuring devices and the like. Inspect machined parts and Sheetmetal fabrications of a complex nature which are characterized by such factors as many related dimensions, a variety of arcs, curves, and compound angles, irregular contours and an absence of locating surfaces, to assure conformity to quality specifications.
U107 Inspector B Assembly - 1st Shift Northrop Grumman CorpU107 Inspector B Assembly - 1st ShiftBaltimore, MDPerform the duties of Inspector C and in addition: Determine and utilize inspection procedures, set-up necessary inspection tools and equipment where fixtures are not provided such as: measuring microscope, Rockwell hardness tester, profilometer, height gauge, Cadillac gauge, dial indicator, parallel bars, right angle knee, gauge blocks, precision pins, bench center, V blocks, sine bar, surface plate, optical comparator (shadow graph) computer-aided measuring equipment, laser measuring devices and the like. Inspect machined parts and Sheetmetal fabrications of a complex nature which are characterized by such factors as many related dimensions, a variety of arcs, curves, and compound angles, irregular contours and an absence of locating surfaces, to assure conformity to quality specifications.
Quality Control Inspector BPI MedicalQuality Control InspectorWashington, WashingtonParticipating in investigations of quality issues and working with cross-functional teams to determine root cause and implement corrective and preventive actions. With E-Verify we are able to confirm the employment authorization of all newly hired employees and most existing employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Quality Inspector I Albers AerospaceQuality Inspector IMarylandNote: The duties and responsibilities described on this document are not necessarily a comprehensive list and additional tasks may be assigned to the employee from time to time; and the scope of the job may change as necessitated by business demands. This position inspects products, monitors internal processes, and recommends corrective actions to improve procedures, products, and production efficiency.
Construction Inspector (FN) The Kenjya-Trusant GroupConstruction Inspector (FN)MarylandWorking with the Department of Defense, Department of Homeland Security, the Intelligence Community, state and local governments, and commercial clients, Kenjya-Trusant provides cyber protection, information technology, engineering, construction management and acquisition support services. Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Quality Inspector ST Engineering North AmericaQuality InspectorBaltimore, MDThe complexity of items inspected is characterized by the presence of dimensions, angles and radii that may be checked by the use of right angles and or parallel set ups, and simple plane trigonometric calculations; regular contours or spring back allowances are charted, and the computation of dimensions not shown on design blue prints can be solved by the use of front angles. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none.
Maryland State Inspector - $7,500 Bonus Carvana CoMaryland State Inspector - $7,500 BonusBaltimore, MD$30–$35 / hourWe have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. We also have a variety of other automotive roles available in one of our 17 locations across the country - take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles.
Facilities Inspector - Aviation & Infrastructure - PA/MD/NJ/DE* Cmts LLCFacilities Inspector - Aviation & Infrastructure - PA/MD/NJ/DE*Baltimore, MD$85,000–$105,000 / yearTwo year associates degree in Civil/Mechanical/Electrical Engineering Technology and three years experience in field inspections and the proposed inspector shall be able to get either of the following within two: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction. High school diploma or GED and 5 years experience in field inspections and any one certification of the following: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction.
Civil Inspector - Aviation & Infrastructure - PA/MD/NJ/DE* Cmts LLCCivil Inspector - Aviation & Infrastructure - PA/MD/NJ/DE*Baltimore, MD$85,000–$105,000 / yearTwo year associates degree in Civil/Mechanical/Electrical Engineering Technology and three years experience in field inspections and the proposed inspector shall be able to get either of the following within two: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction. High school diploma or GED and 5 years experience in field inspections and any one certification of the following: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction.
Mechanical Electrical Plumbing Inspector - Aviation & Infrastructure - PA/MD/NJ/DE* Cmts LLCMechanical Electrical Plumbing Inspector - Aviation & Infrastructure - PA/MD/NJ/DE*Baltimore, MD$85,000–$105,000 / yearTwo year associates degree in Civil/Mechanical/Electrical Engineering Technology and three years experience in field inspections and the proposed inspector shall be able to get either of the following within two: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction. High school diploma or GED and 5 years experience in field inspections and any one certification of the following: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction.
Senior Construction Inspector (FN) The Kenjya-Trusant GroupSenior Construction Inspector (FN)MarylandWorking with the Department of Defense, Department of Homeland Security, the Intelligence Community, state and local governments, and commercial clients, Kenjya-Trusant provides cyber protection, information technology, engineering, construction management and acquisition support services. Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Senior Field Inspector - Rail and Transit Parsons CorpSenior Field Inspector - Rail and TransitDC$49.76–$87.07 / hourAlso requires excellent written and oral communication skills, a familiarity with CAD and other PC software packages typically associated with engineering and construction, and the proven ability for performing in a lead capacity on a project. With minimal supervision, independently performs all aspects of field engineering assignments including development of plans, schedules, contracts, procedures, and construction methods and systems for an assigned project, or a designated area of a large project.
Fire Protection Inspector United States ArmyFire Protection InspectorWashington, DC$55,882–$72,644 / yearIn addition to meeting the specialized experience requirement above, applicants must also possess Firefighter I, Firefighter II, Fire Instructor I, Fire Inspector I, Fire Inspector II, Hazardous Materials Operations, and Airport Firefighter certified through DoD Fire and Emergency Services Certification System, International Fire Service Accreditation Congress (IFSAC), or the Fire Service Professional Qualifications System (PRO-Board) in accordance with DoD 6055.06-M. DoD Certificates and NREMT License : You MUST submit a copy of the following: Firefighter I & II, Fire Instructor I, Fire Inspector I & II, Hazmat Operations, Airport Firefighter certified through DoD Fire and Emergency Services Certification System, International Fire Service Accreditation Congress (IFSAC), or the Fire Service Professional Qualifications System (PRO-Board).
Aviation Safety Inspector (Air Carrier Operations) U.S. Department of TransportationAviation Safety Inspector (Air Carrier Operations)Washington, DC$125,776–$197,200 / yearMinimum 100 flight hours during the last 3 years; Airline Transport Pilot Certificate or Commercial Pilot Certificate with instrument airplane rating (Department of Navy positions require pilot experience as demonstrated by previous ATP level performance in large multi-engine airplanes and helicopters); Possession of a valid second-class FAA medical certificate (For positions within the Department of Navy, applicants must also be physically qualified to ride as an observer aboard squadron aircraft. Specifically, the incumbent serves as a member of the Type Certification Board, Flight Test Group and as advisor to the aircraft certification on flight operation problems involved in the certification processes of newly designed aircraft preparatory to the aircraft being type certificated and introduced into service.
Aviation Safety Inspector, APOI (Air Carrier Flight Oversight) U.S. Department of TransportationAviation Safety Inspector, APOI (Air Carrier Flight Oversight)Washington, DCRemote$90,925–$118,204 / yearMedical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements: Have good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain; Have the ability to hear the conversational voice (hearing aid permitted); Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft. Significant investments are advancing the research and development of autonomous vehicles, environmentally friendly electric aircraft, high-speed and long-endurance solar-powered aircraft, and new types of space vehicles.