Maryland State Inspector/Automotive Technician Passport AutoMaryland State Inspector/Automotive TechnicianCamp Springs, MD$20–$45 / hourFull timeWe are Washington DC's fastest growing auto group which means to you, more state inspections than you will be able to handle. If you are ready to go to work with a great attitude, work well with others and are prepared to stay busy all day.
Construction Inspector (TET II – TET V) Whitman, Requardt & Associates, LLPConstruction Inspector (TET II – TET V)Baltimore, MD$20–$70 / hourFull timeCandidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.
Construction Inspector (TET III – TET V) Whitman, Requardt & Associates, LLPConstruction Inspector (TET III – TET V)Baltimore, MD$20–$70 / hourFull timeCandidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.
NewDepartment of Public Works Inspector Trainee Whitman, Requardt & Associates, LLPDepartment of Public Works Inspector TraineeBaltimore, MDFull timeWe are looking for Construction Inspector Trainees to join our growing team supporting Baltimore City’s Department of Public Works (DPW) . Entry-level inspection work will be in one of the following Public Works areas:Water & Sewer Pipeline New Installations.
Maryland State Inspector/Automotive Technician Passport Auto GroupMaryland State Inspector/Automotive TechnicianSuitland, MDFull timeIf you are ready to go to work with a great attitude, work well with others and are prepared to stay busy all day. Automotive Technician 20 per flat rate hour up to 45 per flat rate hour potential.
Construction Quality Control Inspector IQUASAR LLCConstruction Quality Control InspectorLaurel, MDReview contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.
Facilities Maintenance Quality Control Inspector CBRE Government & Defense ServicesFacilities Maintenance Quality Control InspectorAnnapolis, MarylandThe inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes.
Mechanical Inspector Arcadis NVMechanical InspectorHanover, MD$114,000–$145,600 / yearThe MEP Inspector will support a variety of industrial and commercial construction projects that may include pre-construction, construction, start-up/commissioning, and coordination with electrical power distribution systems, conduit and wiring; voice/tele/data systems; instrumentation and control systems. The Electrical Inspector will assist the project team in identifying deficient work performed by the General Contractor (GC) and its subcontractors, review submittals and look-ahead schedules, perform equipment inspections, and manage deficiency logs via Procore.
Quality Control Inspector Hydrasearch Company LLCQuality Control InspectorStevensville, MD$22–$30 / hourPart timeYou will be responsible for reviewing supplier documentation to ensure total conformance to purchase requirements and will play a key role in communicating technical findings to both production and quality personnel to ensure operational excellence. In this role, you will support manufacturing operations by verifying that all incoming materials, in-process work, and finished products strictly meet defined engineering and quality requirements.
Construction Quality Control Inspector CbConstruction Quality Control InspectorLaurel, MarylandReview contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.
Electrical Quality Control (QC) Inspector M.C. Dean, IncElectrical Quality Control (QC) InspectorFrederick , Maryland$35.50–$39.50 / hourFull timePerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
Electrical Quality Control Inspector M.C. Dean, IncElectrical Quality Control InspectorBaltimore , Maryland$35.50–$39.50 / hourFull timePerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.
Quality Control Inspector - 1st Shift Thales Defense & Security IncQuality Control Inspector - 1st ShiftMD$23.73–$27.28 / hourWith over 1,000 employees, TDSI and its four subsidiaries (Tampa Microwave, Advanced Acoustic Concepts, Trusted Cyber Technologies, and Digital Receiver Technology), supports U.S. Joint Services, special operations forces and multi-national partners with a variety of communication, visualization, electronic warfare, and sensor/sonar capabilities. TDSI considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Quality Control Inspector Government Contracting Resources, IncQuality Control InspectorSpringfield, VAFull timeThis role involves conducting thorough inspections and tests throughout the production or service process, identifying defects or deviations, and documenting findings to ensure compliance with regulatory requirements and company guidelines. Strong analytical skills, attention to detail, and effective communication are essential as the inspector must accurately report quality issues and contribute to continuous improvement initiatives.
Facilities Maintenance Quality Control Inspector J & J Maintenance, Inc.Facilities Maintenance Quality Control InspectorAnnapolis, MD$65,000–$85,000 / yearThe inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes.
NewQuality Control Inspector Oceaneering International IncQuality Control InspectorHanover, MD$33.22–$49.86 / hourAbility to read drawings, comprehend specifications and tolerances, read dial indicators and digital gages, compare results with specifications and record test data, confer with engineers, technicians and production personnel as necessary. The candidate must be able to read dials and displays, compare results with specifications and record test/inspection data, confer with engineers, technicians and production personnel.
Incoming Quality Control (IQC) Inspector III – Mechanical Rocket Lab CorporationIncoming Quality Control (IQC) Inspector III – MechanicalMiddle River, MD$26–$33 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Quality Control Inspector Dixon Valve & Coupling CoQuality Control InspectorMD$22–$30 / hourYou will be responsible for reviewing supplier documentation to ensure total conformance to purchase requirements and will play a key role in communicating technical findings to both production and quality personnel to ensure operational excellence. In this role, you will support manufacturing operations by verifying that all incoming materials, in-process work, and finished products strictly meet defined engineering and quality requirements.
Incoming Quality Control IQC Inspector III - Mechanical Rocket Lab CorpIncoming Quality Control IQC Inspector III - MechanicalMiddle River, MD$26–$33 / hourImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Senior Incoming Quality Control Inspector Rocket Lab CorporationSenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Construction Inspector Artech LLCConstruction InspectorSuitland, MD$40–$48 / hourMust have:A degree in Landscape Architecture, or a related field applicable to the project scope; fifteen (15) years of experience as a construction inspector, including five (5) years in a lead or senior inspector role, may be substituted for the degree requirement. Certified completion of a professionally accredited Quality Control Management Course (e.g., conducted by the US Army Corps of Engineers or an independent private company) within the last five (5) years; Contractor’s self-developed programs will not fulfill this requirement.
MCPP - Quality Inspector - Engineer (Construction) Equipment KBR IncMCPP - Quality Inspector - Engineer (Construction) EquipmentMDAnalyze and display Global Combat Support Systems Marine Corps (GCSS-MC), and Marine Corps Preposition Information Center (MCPIC) data to ensure that equipment is ready for delivery to the customer. Completed applicable maintenance related training through progression in rank (Journeyman School, Intermediate Maintenance Training for NCO's/SNCO's, Chief School).
MCPP: Quality Inspector (Ordnance/Heavy Equipment) KBR IncMCPP: Quality Inspector (Ordnance/Heavy Equipment)MDAnalyze and display Global Combat Support Systems Marine Corps (GCSS-MC), and Marine Corps Preposition Information Center (MCPIC) data to ensure that equipment is ready for delivery to the customer. Completed applicable maintenance related training through progression in rank (Journeyman School, Intermediate Maintenance Training for NCO's/SNCO's, Chief School).
Aviation Safety Inspector AC Maintenance Assistant Partial Program Manager Powerplant U.S. Department of TransportationAviation Safety Inspector AC Maintenance Assistant Partial Program Manager PowerplantDC$90,925–$118,204 / yearSpecialized experience is: Developing aircraft maintenance programs or maintenance requirements, Developing and evaluating aircraft maintenance manuals and record keeping systems; Analyzing reports to ensure compliance with the airworthiness programs, aircraft maintenance quality control and quality assurance, Surveillance and inspections of an air carriers maintenance program, Experience in a maintenance training department of an air carrier. Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements: Have good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain; Have the ability to hear the conversational voice (hearing aid permitted); Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft.
Senior Incoming Quality Control Inspector Rocket Lab CorpSenior Incoming Quality Control InspectorMiddle River, MD$32–$40 / hourImportant information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.
Quality Control Inspector XometryQuality Control InspectorGaithersburg, MD$58,000–$76,000 / yearXometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. As a Quality Control Inspector, you will play a crucial role in ensuring the highest quality of manufactured parts and finished goods that are delivered to our customers.
NewConstruction QA Inspector ASR International CorpConstruction QA InspectorLaurel, MDASR is seeking experienced Construction Quality Assurance (QA) Inspectors to ensure contractor implementation of an effective Quality Control program and verify that all work is in strict compliance with contract documents on construction, alteration, and repair projects at the USSS James J. Rowley Training Center (JJRTC) in Laurel, MD. Founded in 1986 and headquartered in Long Island, NY, ASR serves its clients with a full spectrum of complex professional and technical support services including Construction Management, Engineering, Logistics, Project Management and Quality Control across the U.S. and in more than 40 countries worldwide.
Construction QA Inspector ASR INTERNATIONALConstruction QA InspectorLaurel, MDFull timeASR is seeking experienced Construction Quality Assurance (QA) Inspectors to ensure contractor implementation of an effective Quality Control program and verify that all work is in strict compliance with contract documents on construction, alteration, and repair projects at the USSS James J. Rowley Training Center (JJRTC) in Laurel, MD. Founded in 1986 and headquartered in Long Island, NY, ASR serves its clients with a full spectrum of complex professional and technical support services including Construction Management, Engineering, Logistics, Project Management and Quality Control across the U.S. and in more than 40 countries worldwide.
Construction Inspector (FN) The Kenjya-Trusant Group , LLCConstruction Inspector (FN)Fort Meade, MD$90,000–$105,000 / yearWorking with the Department of Defense, Department of Homeland Security, the Intelligence Community, state and local governments, and commercial clients, Kenjya-Trusant provides cyber protection, information technology, engineering, construction management and acquisition support services. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Quality Control Inspector Ameresco IncQuality Control InspectorDC$42.88–$53.61 / hourAt Ameresco, we show the way by developing, constructing and operating tailored smart energy efficiency solutions, distributed energy resources, and infrastructure upgrades that drive cost savings, resilience, decarbonization, and innovation. Ameresco, Inc. (NYSE:AMRC) is a leading energy solutions provider dedicated to helping customers reduce costs, enhance resilience, and decarbonize to net zero in the global energy transition.
Aviation Safety Inspector (AW) (Partial Program Manager (PPM) ACM) U.S. Department of TransportationAviation Safety Inspector (AW) (Partial Program Manager (PPM) ACM)DC$107,446–$139,684 / yearMedical Requirements: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements: Have good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain; Have the ability to hear the conversational voice (hearing aid permitted); Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft. Experience involving the maintenance and repair of airframes, power plants, and systems of multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight maintained under an airworthiness maintenance and inspection program.
Aviation Safety Inspector (Air Carrier Maintenance), Partial Program Manager, Powerplant U.S. Department of TransportationAviation Safety Inspector (Air Carrier Maintenance), Partial Program Manager, PowerplantWashington, DC$107,446–$139,684 / yearMedical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, and must meet all of the following requirements: Have good distant vision in each eye and be able to read printed materials the size of typewritten characters (glasses and contact lenses permitted) without strain; Have the ability to hear the conversational voice (hearing aid permitted); Not have any physical condition that would cause them to be a hazard to themselves or others or that would interfere with their ability to fly as passengers in a variety of aircraft. When the predominant work involves air carrier avionics applicants for Aviation Safety Inspector(Maintenance) positions must meet all of the following requirements: Experience involving the maintenance and repair of airframes, power plants, and systems of multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight maintained under an airworthiness maintenance and inspection program.
Aviation Safety Inspector (AW-ACM)(PPM) U.S. Department of TransportationAviation Safety Inspector (AW-ACM)(PPM)DC$107,446–$139,684 / yearThe minimum medical requirements include the following requirements: Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and. Experience involving the maintenance and repair of airframes, power plants, and systems of multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight maintained under an airworthiness maintenance and inspection program.
Construction Inspector City of Rockville, MDConstruction InspectorRockville, MD$66,074.83–$109,023.21 / yearThis position is responsible for performing difficult technical and intermediate administrative work involved in inspecting, managing, and assuring the quality of a wide variety of Public Works related projects, including sediment control, landscaping, grading, concrete, asphalt, construction, water, sewer, storm drain, and stormwater management. Inspects, observes, and documents the construction of public works related construction, including concrete curbs, sidewalks, and driveway aprons; water, sewer, and storm drain mains and appurtenances, including backfill, compaction, and restoration of the trench and roadway; and ensures compliance with all applicable local, state, and federal laws, codes, and regulations.
Senior Construction Inspector (FN) The Kenjya-Trusant Group , LLCSenior Construction Inspector (FN)Fort Meade, MD$110,000–$125,000 / yearWorking with the Department of Defense, Department of Homeland Security, the Intelligence Community, state and local governments, and commercial clients, Kenjya-Trusant provides cyber protection, information technology, engineering, construction management and acquisition support services. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications.
Quality Inspector Integra LifeSciences Holdings CorpQuality InspectorColumbia, MD$19.19–$25.43 / hourWhile performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, high precarious places, toxic or caustic chemicals, risk of electrical shock and vibration. The adverse working conditions listed in this section include, but are not limited to, those environmental conditions to which the employee may be exposed while undertaking the essential duties and responsibilities of this position, which is that of a general plant environment.
Maintenance of Traffic (MOT) / Traffic Control Inspector M&J EngineeringMaintenance of Traffic (MOT) / Traffic Control InspectorRockville, MarylandSince its inception in 2004, M&J has grown into diversified provider of engineering, construction management, construction inspection, technology, and environmental services to a broad range of clients, including federal, state and city/local agencies, private owners, architects, engineers and contractors. M&J is a leader in construction management and inspection, ITS, mechanical, electrical, wastewater, water supply, tunnel airport, port, marine/coastal, environmental engineering, and design-build services for both new infrastructure projects and renovations.
QA Inspector MarkonQA InspectorArlington, Virginia$115,000–$125,000 / yearFull timeDescription: Markon is seeking an experienced Senior Quality Assurance Inspector and team leader with extensive construction industry expertise to provide Owner’s Representative construction management services in support of a Department of War (DoW) client. Document Review: Review project drawings, specifications, codes, product data, and related documentation in preparation for inspections, preparatory phase meetings, initial phase inspections, follow-up phases, and quality assessments.
NewQA Inspector IV - MEP MarkonQA Inspector IV - MEPArlington, Virginia$115,000–$125,000 / yearFull timeDescription: Markon is seeking an experienced Senior Quality Assurance Inspector and team leader with extensive construction industry expertise to provide Owner’s Representative construction management services in support of a Department of War (DoW) client. Document Review: Review project drawings, specifications, codes, product data, and related documentation in preparation for inspections, preparatory phase meetings, initial phase inspections, follow-up phases, and quality assessments.
NewQuality Inspector II React Health HoldingsQuality Inspector IIWashingtonEmployees typically sit comfortably to do their work, interspersed by brief periods of standing, walking, bending, carrying papers and books, and extensive periods requiring the use of computer terminals to accomplish work objectives. Your day-to-day duties include but are not limited to measuring objects compared to their intended physical specifications, identifying defects, running quality tests, and performing other verification activities.
Mechanical Electrical Plumbing Inspector - Aviation & Infrastructure - PA/MD/NJ/DE* Cmts LLCMechanical Electrical Plumbing Inspector - Aviation & Infrastructure - PA/MD/NJ/DE*Baltimore, MD$85,000–$105,000 / yearTwo year associates degree in Civil/Mechanical/Electrical Engineering Technology and three years experience in field inspections and the proposed inspector shall be able to get either of the following within two: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction. High school diploma or GED and 5 years experience in field inspections and any one certification of the following: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction.
Facilities Inspector - Aviation & Infrastructure - PA/MD/NJ/DE* Cmts LLCFacilities Inspector - Aviation & Infrastructure - PA/MD/NJ/DE*Baltimore, MD$85,000–$105,000 / yearTwo year associates degree in Civil/Mechanical/Electrical Engineering Technology and three years experience in field inspections and the proposed inspector shall be able to get either of the following within two: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction. High school diploma or GED and 5 years experience in field inspections and any one certification of the following: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction.
Civil Inspector - Aviation & Infrastructure - PA/MD/NJ/DE* Cmts LLCCivil Inspector - Aviation & Infrastructure - PA/MD/NJ/DE*Baltimore, MD$85,000–$105,000 / yearTwo year associates degree in Civil/Mechanical/Electrical Engineering Technology and three years experience in field inspections and the proposed inspector shall be able to get either of the following within two: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction. High school diploma or GED and 5 years experience in field inspections and any one certification of the following: NICET Level 3 Certification in one or more of the following fields: Building Construction; Construction Material Testing Geotechnical Transportation Fire Protection Industrial Instrumentation Low voltage communication systems Security Systems Land Management and Water Control Underground Utilities Construction.
Quality Inspector I Albers AerospaceQuality Inspector IMarylandNote: The duties and responsibilities described on this document are not necessarily a comprehensive list and additional tasks may be assigned to the employee from time to time; and the scope of the job may change as necessitated by business demands. This position inspects products, monitors internal processes, and recommends corrective actions to improve procedures, products, and production efficiency.
Fiber Quality Inspector Parsons CorpFiber Quality InspectorMDWhat Youll Be Doing: • Conduct regular on-site fiber quality inspections for all work performed by Project personnel, Contractors and Sub-Contractors to ensure compliance with all contractual requirements; • Provide oversight of the Project Quality Plan. What Required Skills Youll Bring: • A minimum of a bachelor's degree in business, engineering, environmental sciences, or related field (or equivalent)plus a minimum 4 years demonstrable experience in system safety and/or construction safety.
Quality Inspector - A Northrop Grumman CorpQuality Inspector - AAnnapolis, MD$48,459–$112,669 / yearThe Oceanic System Quality and Mission Assurance team is looking for a talented QUALITY INSPECTOR A to join our team in Annapolis, MD with experience in evaluating a variety of purchased and internally manufactured components, to determine if drawing/ specification requirements are met. The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate''s experience, education, skills and current market conditions.
Inspector - Rail/Bus Colliers Engineering & DesignInspector - Rail/BusWashington$115,000–$166,400 / yearFull timePrepares accurate, complete, and timely Inspector Daily Reports (IDRs) documenting weather, manpower, equipment, work activities, locations, materials placed, quantities, testing performed, deficiencies, and discussions held with the contractor. Overview: Ramos CS, now a part of Colliers Engineering & Design, is actively hiring an Inspector to perform a wide variety of field inspection work on a transit capital program covering rail and bus construction scopes.
Maryland State Inspector - $7,500 Bonus Carvana CoMaryland State Inspector - $7,500 BonusBaltimore, MD$30–$35 / hourWe have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. We also have a variety of other automotive roles available in one of our 17 locations across the country - take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles.
U107 Inspector B Assembly - 1st Shift Northrop Grumman CorpU107 Inspector B Assembly - 1st ShiftBaltimore, MDPerform the duties of Inspector C and in addition: Determine and utilize inspection procedures, set-up necessary inspection tools and equipment where fixtures are not provided such as: measuring microscope, Rockwell hardness tester, profilometer, height gauge, Cadillac gauge, dial indicator, parallel bars, right angle knee, gauge blocks, precision pins, bench center, V blocks, sine bar, surface plate, optical comparator (shadow graph) computer-aided measuring equipment, laser measuring devices and the like. Inspect machined parts and Sheetmetal fabrications of a complex nature which are characterized by such factors as many related dimensions, a variety of arcs, curves, and compound angles, irregular contours and an absence of locating surfaces, to assure conformity to quality specifications.
NewU107 Inspector B Assembly Northrop Grumman CorpU107 Inspector B AssemblyBaltimore, MDPerform the duties of Inspector C and in addition: Determine and utilize inspection procedures, set-up necessary inspection tools and equipment where fixtures are not provided such as: measuring microscope, Rockwell hardness tester, profilometer, height gauge, Cadillac gauge, dial indicator, parallel bars, right angle knee, gauge blocks, precision pins, bench center, V blocks, sine bar, surface plate, optical comparator (shadow graph) computer-aided measuring equipment, laser measuring devices and the like. Inspect machined parts and Sheetmetal fabrications of a complex nature which are characterized by such factors as many related dimensions, a variety of arcs, curves, and compound angles, irregular contours and an absence of locating surfaces, to assure conformity to quality specifications.