Staff Engineer Sirtex Medical LtdStaff EngineerWoburn, MA$130,000–$157,000 / yearSCOPE: This role will involve a range of responsibilities including but not limited to product design, prototyping and bench-testing, verification and validation test design and execution, data analysis, and root cause investigation. Our success is fueled by our dedication to serving the medical community, maintaining professionalism, fostering a collaborative work culture, nurturing an entrepreneurial spirit, and continuously pursuing innovation and improvement.
Product Engineer MondoProduct EngineerDanvers, Massachusetts$60–$65 / hourYou will work alongside a close-knit team of systems and hardware engineers to triage field issues, support design changes, and sustain a life-critical medical device already in commercial release. We are seeking a high-energy, hands-on Product Engineer to join a fast-paced sustaining engineering team focused on the Automated Impella Console (AIC).
Principal Design Quality Assurance Engineer - Endoscopy Boston Scientific CorpPrincipal Design Quality Assurance Engineer - EndoscopyMarlborough, MAThe anticipated compensation listed above and the value of core and optional employee benefits offered by Boston Scientific (BSC) - see www.bscbenefitsconnect.com-will vary based on actual location of the position and other pertinent factors considered in determining actual compensation for the role. As a global medical technology leader for more than 45 years, we advance science for life by providing a broad range of high-performance solutions that address unmet patient needs and reduce the cost of healthcare.
Senior System Security Engineer The Charles Stark Draper LaboratorySenior System Security EngineerCambridge, MassachusettsThe Secure Solutions Group within the System’s Engineering Directorate is seeking a Senior System Security Engineer to support engineering, integrating, and deploying trustworthy secure platforms that resist cyber, reverse engineering, and supply chain threats. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities.
Senior Systems Engineer The Charles Stark Draper LaboratorySenior Systems EngineerCambridge, MassachusettsThe Secure Solutions Group within the System’s Engineering Directorate is seeking a Senior Systems Engineer to support concept and architecture, and requirement development of trustworthy secure platforms that resist cyber, reverse engineering, and supply chain threats across Draper’s mission areas. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities.
Sr. Electromagnetic Design Engineer The Charles Stark Draper LaboratorySr. Electromagnetic Design EngineerCambridge, MassachusettsAs a Senior Electromagnetic Design Engineer in the Electro-Mechanical Instruments Group at Draper, you will play a critical role in the development of Electro-Mechanical inertial instruments for cutting-edge guidance applications building on Draper’s long legacy. You will work closely with a team of engineers and physicists to build next-generation gyroscope, accelerometer, and guidance-aiding sensor prototypes, characterize their performance, develop production roll-out and ultimately deliver production hardened systems meeting some of the world’s most stringent requirements.
Senior Test Equipment Development Engineer The Charles Stark Draper LaboratorySenior Test Equipment Development EngineerCambridge, MassachusettsSystem I&T Engineers leverage multi-disciplinary engineering expertise and collaborate with other Systems Engineers to establish clear, verifiable, and traceable requirements, inform and drive system concepts, architectures, and designs to promote testability, and utilizes resident expertise and lessons learned to support the development of highly reliable, robust, and complex systems. The Strategic Systems Engineering Test Equipment group at Draper is seeking a Senior Test Equipment Development Engineer to work within multidisciplinary teams to develop and provide full system lifecycle development and management of complex electrical, mechanical and software-based test equipment.
Senior Mission Critical Software Engineer The Charles Stark Draper LaboratorySenior Mission Critical Software EngineerCambridge, MassachusettsDraper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. They work on developing and debugging embedded software as well as executing software and system-level tests in various engineering environments, including complex software-in-the-loop simulations and real-time hardware-in-the-loop environments.
Senior Yield Engineer The Charles Stark Draper LaboratorySenior Yield EngineerCambridge, MassachusettsDraper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. • Drive new product yield ramps end-to-end: support the development of failure mode and effect analysis and risk reduction, author control plans, establish manufacturing readiness level and transition-to-volume readiness reviews.
Principal Integration and Test Engineer The Charles Stark Draper LaboratoryPrincipal Integration and Test EngineerCambridge, MassachusettsDraper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. As a Principal Systems Test Engineer, you will be responsible for leading a large integration and test task of 10-15 engineers, managing all test development and execution activities associated with MEMS IMU system testing.
Mixed Signal Electronic Design Engineer The Charles Stark Draper LaboratoryMixed Signal Electronic Design EngineerCambridge, MassachusettsThe Draper team is chartered with supporting the Nation’s most challenging problems by 1) providing an iterative and agile approach to innovative and creative technical solutions delivered at the speed of mission and 2) driving leading edge technology development efforts to support future mission needs. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities.
Mixed-Signal Electronic Design Engineer 2 The Charles Stark Draper LaboratoryMixed-Signal Electronic Design Engineer 2Cambridge, MassachusettsThe Draper team is chartered with supporting the Nation’s most challenging problems by 1) providing an iterative and agile approach to innovative and creative technical solutions delivered at the speed of mission and 2) driving leading edge technology development efforts to support future mission needs. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities.
Flight Software Engineer, Distinguished The Charles Stark Draper LaboratoryFlight Software Engineer, DistinguishedCambridge, MassachusettsDraper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. They work on developing and debugging embedded software as well as executing software and system-level tests in various engineering environments, including complex software-in-the-loop simulations and real-time hardware-in-the-loop environments.
Principal Hardware Integration and Test Engineer The Charles Stark Draper LaboratoryPrincipal Hardware Integration and Test EngineerCambridge, MassachusettsThe Aiding Technologies Integration & Test Group at Draper is seeking a Principal Integration & Test Engineer with broad technical skills and a wealth of industry experience to lead/advise teams in a multidisciplinary environment to conceptualize, build, and test advanced electro-mechanical and electro-optical systems for a wide range of applications including GN&C (Guidance, Navigation and Control) systems, defense, space, and other related areas. Tasking will include leading and advising programs and business areas on the best practices for the development of test plans and procedures, supporting the design and development process (DFT), analysis and evaluation of sensors (custom and COTS) and sensor performance, and the design, manufacture, and implementation of all required supporting test equipment, fixturing, and test scripts.
Senior GNC Systems Engineer The Charles Stark Draper LaboratorySenior GNC Systems EngineerCambridge, MassachusettsWorking in a dynamic team environment developing state-of-the-art weapon/GN&C systems will provide exposure to a wide range of advanced technologies as well as afford opportunities for increased leadership/impact on the development of new war-fighter capability. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities.
Senior Hardware Integration and Test Engineer The Charles Stark Draper LaboratorySenior Hardware Integration and Test EngineerCambridge, MassachusettsThe Aiding Technologies Integration & Test Group at Draper is seeking a Senior Integration & Test Engineer with broad technical skills and experience to work in a multidisciplinary environment to conceptualize, build, and test advanced electro-mechanical and electro-optical systems for a wide range of applications including GN&C (Guidance, Navigation and Control) systems, defense, space, and other related areas. Tasking will include leading the development of test plans and procedures, supporting the design and development process (DFT), analysis and evaluation of sensors (custom and COTS) and sensor performance, and the design, manufacture, and implementation of all required supporting test equipment, fixturing, and test scripts.
System Security Engineer The Charles Stark Draper LaboratorySystem Security EngineerCambridge, MassachusettsThe High Availability Architecture Group within the Systems Engineering directorate is seeking a Senior System Security Engineer to guide and facilitate concept development, mission-system analysis, and requirement definition & compliance for critical, yet novel & disruptive cyber resilient technologies. This handpicked candidate must possess a unified System Security, Cybersecurity, and Cryptography expertise that can expand Draper’s insight to address national security threats which remain prevalent throughout critical enterprises, infrastructure, systems, and operations.
Electronics Hardware Design Engineer The Charles Stark Draper LaboratoryElectronics Hardware Design EngineerCambridge, MassachusettsDraper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. The Tailored Systems Business Area within Electronics Program Office directorate delivers first-of-a-kind field-ready microelectronics solutions in support of National Security missions.
GNC Systems Engineer The Charles Stark Draper LaboratoryGNC Systems EngineerCambridge, MassachusettsWorking in a dynamic team environment developing state-of-the-art weapon/GN&C systems will provide exposure to a wide range of advanced technologies as well as afford opportunities for increased leadership/impact on the development of new war-fighter capability. The Hypersonic and Advanced Weapons group at Draper is seeking a Senior Guidance, Navigation, and Control (GNC) Systems Engineer to work within and lead multi-disciplinary teams to design next-generation weapon system concepts for the war fighter.
Senior Electronics Integration and Test Engineer The Charles Stark Draper LaboratorySenior Electronics Integration and Test EngineerCambridge, MassachusettsSystem I&T Engineers leverage multi-disciplinary engineering expertise and collaborate with other Systems Engineers to establish clear, verifiable, and traceable requirements, inform and drive system concepts, architectures, and designs to promote testability, and utilizes resident expertise and lessons learned to support the development of highly reliable, robust, and complex systems. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities.