NewManufacturing Engineer III| (NH) GCR Professional ServicesManufacturing Engineer III| (NH)Hudson, New HampshireContractorYou will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
Manufacturing Engineer III (NH) GCR Professional ServicesManufacturing Engineer III (NH)Hudson, New HampshireContractorYou will collaborate with cross-functional teams, including design engineers, production personnel, and quality assurance, to optimize manufacturing operations and drive continuous improvement initiatives. As a Manufacturing Engineer, your primary responsibility will be to develop and improve manufacturing processes and systems to ensure the efficient and cost-effective production of defense and aerospace products.
Manufacturing Engineer KTEK RESOURCINGManufacturing EngineerNashua, NHContractorRecommends and implements improvements to production processes, cycle times, methods and controls. Oversees automated equipment installation, maintenance and upkeep.
CNC MANUFACTURING ENGINEER - M PLS Staffing Solutions, IncCNC MANUFACTURING ENGINEER - MBeverly, MA$43–$57.69 / hourFull timeThe Manufacturing Engineer is responsible for providing necessary support to Production, driving efficiency, enhancing product quality, and contributing to our overall success in the manufacture of high precision products. This role interacts with employees from all departments to ensure the highest possible quality, maximize schedule attainment, and improve product flow.
Manufacturing Engineer Shred-Tech CorporationManufacturing EngineerCambridge, ONWorking closely with cross-functional teams including Engineering, Production, Quality, Supply Chain and Operations, you will lead process improvement initiatives, support engineering change implementation and contribute to the successful execution of strategic manufacturing projects. As a Manufacturing Engineering Specialist at Shred-Tech, you will play a key role in optimizing manufacturing operations, supporting new product introductions, and driving continuous improvement initiatives across the organization.
NewCNC Manufacturing Engineer - Industrial - Salisbury, MA Michael Page USACNC Manufacturing Engineer - Industrial - Salisbury, MASalisbury, MA$90,000–$110,000 / yearFull timeThe CNC Manufacturing Engineer will report directly into the Engineering Manager and be responsible for: Develop, optimize, and troubleshoot CNC programs for multi-axis mills and lathes (primarily using Siemens NX). My client is seeking a highly skilled CNC Programmer/Manufacturing Engineer that will combine hands-on CNC programming with broader manufacturing engineering responsibilities.
Senior Manufacturing Engineer RJS AssociatesSenior Manufacturing EngineerBillerica, MAFull timeManufacturing Engineer will monitor production and testing, assist in troubleshooting manufacturing issues, and drive continuous improvement efforts throughout the process. Manufacturing Engineer your primary responsibility will be to take ownership of one or more product lines and manage that product line’s manufacturing process from beginning to end.
Manufacturing Engineer - Thermal Solutions Wakefield Thermal Solutions, Inc.Manufacturing Engineer - Thermal SolutionsNashua, NHBuilding on over four decades of leadership and experience, Wakefield Thermal designs, manufactures, and sells thermal management products that remove excess heat generated by electronic components. Historically talented at restoring distressed companies, Heico now strategically targets acquisitions that will complement its ever-growing portfolio of companies in manufacturing, construction, and industrial services.
NewManufacturing Test Engineer (NH) GCR Professional ServicesManufacturing Test Engineer (NH)Hudson, New HampshireContractorOverview: Client is seeking a Manufacturing Test Engineer or Test Technician to perform debug and validation efforts for Intel-based server motherboards. - Experience doing root-cause analysis and complex debug activities on motherboard platforms (Intel server motherboard platforms is preferred) .
NewDesign Quality Assurance Engineer Corporate Solutions TechDesign Quality Assurance EngineerBillerica, MA$140,000–$170,000 / yearFull timeWorking closely with Design Engineers, Program Managers, Manufacturing Engineering, and Quality teams, you will ensure products progress from concept through design transfer while meeting all regulatory, customer, and internal quality requirements. This position plays a critical role in ensuring Design Control compliance for contract development and manufacturing programs supporting the medical device, aerospace, and defense industries.
NewManufacturing Planner / Scheduler JobotManufacturing Planner / SchedulerSaugus, MA$65,000–$85,000 / yearInformation collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. With approximately 70 employees, they specialize in CNC machining, Swiss machining, milling, turning, deburring, cleanroom operations, and value-added services including plating, heat treating, grinding, and assembly.
Quality Engineer III (NH) GCR Professional ServicesQuality Engineer III (NH)Hudson, New Hampshire$45–$58 / hourContractorThis role will participate and/or lead failure analysis in manufacturing and for field failures, develop troubleshooting & repair schemes, develop manufacturing process controls and documentation, interface with manufacturing and quality personnel to train and transfer processes & knowledge for successful volume production launches, and engage with suppliers as needed to drive improvement and implement process controls. This is a hands-on role that works with a team of quality engineers, technicians and inspectors that are engaged through the entire life cycle of product, starting during development, continuing with transitioning of product to manufacturing, and then supporting the continuous manufacture of product.
Field Service Engineer/Technician Matec Instrument Companies, Inc.Field Service Engineer/TechnicianNorthborough, MA$85,000–$120,000 / yearMatec builds complex ultrasonic testing systems used by major aerospace and industrial manufacturers. If you know how machines work—and enjoy figuring out why they don’t—this is your kind of role.
NewQuality Engineer Vaco LLCQuality EngineerHudson, NH$31–$49Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual’s skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. Determining compensation for this role (and others) at Vaco/Highspring depends upon a wide array of factors including but not limited to the individual’s skill sets, experience and training, licensure and certifications, office location and other geographic considerations, as well as other business and organizational needs.
Cyclotron Engineer SOFIECyclotron EngineerHaverhill, MA$90,000–$100,000 / yearAdditionally, the Cyclotron-Support Engineer I is responsibility for first-line troubleshooting, maintenance, and repair of equipment associated with manufacturing, including manipulator arms, lead shielded hot cells, radiosynthesizers, etc. Perform diagnosis and repair on the following: Electronic equipment, electro-pneumatic systems, high vacuum systems, deionized chilled water systems, high voltage, target, and high-power RF systems.
Senior Mechanical Engineer SymboticSenior Mechanical EngineerReading, MAApplying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. Cross-Functional Collaboration: Work closely with electrical, software, controls, manufacturing, and quality engineering teams to ensure seamless integration and product success. .
NewRF Engineer III (NH) - Security Clearance GCR Professional ServicesRF Engineer III (NH) - Security ClearanceHudson, New HampshireContractorCollaboration: Collaborate with cross-functional teams, including electrical engineers, mechanical engineers, software engineers, and project managers, to ensure successful integration of the Antennas. *Testing and Measurement Equipment: - Experience with Antenna/RF testing and measurement equipment, such as network analyzers, spectrum analyzers, signal generators, and oscilloscopes.
Operations Manager - Equipment Manufacturing - Hudson, MA Michael Page USAOperations Manager - Equipment Manufacturing - Hudson, MAHudson, MA$100,000–$130,000 / yearFull timeThis Operations Manager leads daily operations across production, procurement, and logistics within a fabrication and equipment manufacturing environment. With consistent double-digit growth, it has built a strong reputation for delivering engineered solutions to leading global clients.
General/Interdisciplinary Engineer, Senior - Secret DCS CorporationGeneral/Interdisciplinary Engineer, Senior - SecretBedford, MA$90,220–$170,000 / yearConduct systems architectural analyses to include system design/design feasibility and state-of-the-art assessment to Produce architectures, document planned and existing systems, determine deficiencies, develop alternatives, recommend solutions, and support development of a plan to implement the chosen solution per acquisition and sustainment system engineering processes. Analysis of Alternatives (AoA), Systems Engineering Plan (SEP)…), systems review and analysis with written reporting, briefing, and artifact development as required for all of the technical specialty areas defined in this section; and the planning and execution of all necessary technical reviews, assessments, and interchange meetings (e.g.
Process Engineer III â Contract Role Kinetic Personnel GroupProcess Engineer III â Contract RoleMarlborough, MA$65–$70 / hourTemporaryProcess development â Create process flow diagrams, mass and energy balances, and support HAZOP and FMEA risk assessments. The position requires strong communication skills, technical depth, and the ability to collaborate across teams.
Application Engineer GCR Professional ServicesApplication EngineerBillerica, Massachusetts$95,000–$130,000 / yearJob Summary: This role is responsible for translating customer technical requirements into product specifications, designing and validating new features, and developing custom mechanical components. It also includes maintaining technical documentation, providing on-site support, and collaborating cross-functionally to ensure successful product implementation.
CAD / PCB Engineer II GCR Professional ServicesCAD / PCB Engineer IIAndover, MassachusettsContractorJoin a focused team of engineers bringing highly complex, dense, rugged and secure electronic packaging solutions to our nation’s warfighters and first responders. • Ability to work in a fast-paced engineering services group supporting multiple time zones within the US and internationally.
NewRF Engineer PlanIT GroupRF EngineerChelmsford, MAExpertise with RF subsystems and hardware including antennas, transmitters, receivers, microwave components, low noise amplifiers, high power amplifiers, advanced electronic modules, amplifiers, mixers, switches, frequency generation circuits, and frequency conversion circuits is desired. Basic Minimum Requirements: • Bachelor of Science Degree in Electrical Engineering preferred or BS Degree in Science, Technology, Engineering, or Math (STEM) accepted plus a minimum of 5+ years of relevant professional engineering experience.
Thermal Design Engineer Wakefield Thermal Solutions, Inc.Thermal Design EngineerNashua, NH$117,925 / yearESSENTIAL DUTIES AND RESPONSIBILITIES: • In support of the pioneer status for the Wakefield Thermal Brand, develop targeted products for various market segments and introduce these new products into distribution sales channel, including the identification of new products, and expansion of existing products. SUMMARY: Reporting to the Director of Engineering, the Thermal Design Engineer will be a technical resource for both internal and external stakeholders as it relates to the design of our various, highly technical product offerings in the thermal design space.
Senior Mechanical Engineer Sparks GroupSenior Mechanical EngineerFranklin, MA$160,000–$200,000 / yearThe ideal candidate is comfortable working in a growing organization, enjoys solving complex engineering challenges, and has experience collaborating across engineering, manufacturing, and customer teams. Ability to obtain and maintain a U.S. Department of Defense security clearance; previous experience supporting regulated, aerospace, or defense programs is highly preferred.
NewQuality Engineer kSARIA CorporationQuality EngineerHudson, NHAnalyze Key Characteristic measurement data to calculate Manufacturing Process Capability (“Cpk”) and identify areas for collective and continual manufacturing process improvement toward a goal of Cpk 1.33. This position will be responsible for all aspects of Quality Engineering within the company including the following: Maintain Quality Manual/Procedures for AS9100 and ISO9001.
Project Engineer Butler America AerospaceProject EngineerMaynard, MA$57–$67 / hourContractorMaintain and update the Integrated Master Schedule (IMS) for Advanced Test Equipment (ATE) programs; ensuring alignment with milestones and resource plans. * Identifying and driving continuous process improvement initiatives that boost project execution, efficiency, and improve documentation quality.
NewSystems Engineer, Junior - TS DCS CorporationSystems Engineer, Junior - TSBedford, MA$73,160–$115,000 / yearThe C2ISR Division provides worldwide life cycle support across the spectrum of the C2ISR capabilities based enterprise; including supply, distribution, materiel management, acquisition, system engineering and maintenance, financial planning and budgeting, security, flight test, and contracting functions. Experienced in requirements development, production and deployment, and operation and support, architectures development & implementation, modeling & simulation including but not limited to Model Based Systems Engineering principles, verification & validation, technical data package development and sustainment, and principles of configuration management.
NewValidation Engineer ECLAROValidation EngineerDevens, MA$52.14–$55.30 / hourDesign, execute, manage, and implement QC instrument / software qualification documents such as (but not limited to): User Requirement Specification (URS), Design Qualification (DQ), validation plans, equipment IOQ protocols, software test scripts, configuration specifications, risk assessments, qualification summary reports. Quality management system experience including: document control / management, change controls, investigations, deviations, electronic validation databases, asset management database.
NewFM Approvals Engineering Quality Auditor II FMFM Approvals Engineering Quality Auditor IINorwood, MA$74,080–$106,500The role of the Quality Auditor is expected to independently schedule and conduct conformity assessment audits at customer locations. This role will support a team of dedicated auditors who focus on conducting customer at location on-site compliance audits.
NewProject Engineer PlanIT GroupProject EngineerChelmsford, MAMaintain and update the Integrated Master Schedule (IMS) for Advanced Test Equipment (ATE) programs; ensuring alignment with milestones and resource plans. • Identifying and driving continuous process improvement initiatives that boost project execution, efficiency, and improve documentation quality.
Senior Staff Engineer, R&D Tooling - Plastics - Nashua, NH Michael Page USASenior Staff Engineer, R&D Tooling - Plastics - Nashua, NHNashua, NH$120,000–$135,000 / yearFull timeThe culture values collaboration, continuous improvement and practical problem‑solving, offering engineers the opportunity to work closely with manufacturing, suppliers and R&D teams in a hands‑on, technically challenging setting. Reporting directly into the Engineering Manager, you will be responsible for the following: Lead the technical development and ongoing improvement of R&D tooling across multiple manufacturing processes.
Spinal Instruments Development Engineer - Watertown, MA Michael Page USASpinal Instruments Development Engineer - Watertown, MAWatertown, MA$100,000–$130,000 / yearFull timeThe Spinal Implant Instruments Development Engineer will play a key role in designing and developing innovative spinal implant instruments within the medical industry. Design complete spinal instrument systems for procedures, including trials, inserters, distractors, reduction tools, and minimally invasive workflows.
Senior Plastics Engineer - Nashua, NH Michael Page USASenior Plastics Engineer - Nashua, NHNashua, NH$105,000–$125,000 / yearFull timeReporting directly into the Engineering Manager, you will be responsible for: Installing, improving, and evaluating new and existing equipment and processes. As the Senior Plastics Engineer, you will work to improve and develop new manufacturing equipment and processes on the production floor.
Application/Sales Engineer - Metal Fabrication - Boston Michael Page USAApplication/Sales Engineer - Metal Fabrication - BostonBoston, MA$80,000–$100,000 / yearFull timeWith approximately 400 employees and continued expansion planned, the business is investing heavily in data centre infrastructure and large enterprise customers, creating strong long-term growth opportunities. The client is a well-established and fast-growing manufacturer of metal components and custom-engineered parts serving OEM customers across multiple industrial sectors.
Account Engineer, Boiler & Machinery FMAccount Engineer, Boiler & MachineryNorwood, MA$98,000–$141,000Must possess a strong understanding of asset integrity principles in complex process environments, including the reliability and integrity of critical equipment such as steam and gas turbines, electrical generators, rotating equipment, boilers, and piping systems, along with electrical systems, and how these systems, including their associated control and protection elements, interact and impact one another. Critical to the role is the ability to influence key stakeholders so they become more resilient against hazards and exposures, ultimately developing into a trusted advisor through sustainable risk improvement, strong communication skills, engineering expertise, and business acumen.
Senior Lean Engineer Michael Page USASenior Lean EngineerManchester, NH$110,000–$130,000 / yearFull timeA successful Senior Lean Engineer should have: Bachelor's degree in Engineering, Operations, or related field (advanced degree preferred). This role drives measurable results through Lean, Six Sigma, and Theory of Constraints while partnering with cross-functional teams.
FM Approvals Electrical Engineer FMFM Approvals Electrical EngineerNorwood, MAAs a trusted leader in third-party certification, we help manufacturers bring safe, compliant, and high-performing products to market. Here, you'll grow your technical expertise, collaborate with industry experts, and play a key role in advancing global safety.
Support Engineer I CollaberaSupport Engineer INorth Reading$22–$25 / hourTemporaryContractorResponsibilities include the timely production of precision components affecting prototyping, production runs and engineering deliverables, as well as routine equipment maintenance. Basic working knowledge of fixture and workholding design (custom jigs and fixtures preferable) at a fabrication level.
NewSr. Mechanical Engineer Johnson ControlsSr. Mechanical EngineerBurlington, MA$150,000–$170,000 / yearReadiness and enthusiasm to work in a dynamic environment that features: rapidly changing requirements, quick iteration with novel hardware, heavy communication demands, and process development that involves critical, high-risk trade-offs. Enabled by the Stack Forging™ process, JCI produces high-performance thermal components and cooling loop solutions — purpose-built for direct integration into AI, HPC, and mission-critical systems.
NewSr. Process Engineer, Delivery Johnson ControlsSr. Process Engineer, DeliveryBurlington, MA$110,000–$135,000 / yearJCI Enterprises addresses these constraints with advanced thermal management components enabled by its Stack Forging™ process, which creates single-piece, leak-tight metal parts with complex internal microgeometries for stronger cooling performance, lower pressure drop, and high reliability. Process Tuning & Optimization: Contribute across the process of Stack Forging, including laser cutting, metal-metal bonding, surface characterization/preparation, complex part geometry design, data and computational analysis, and material property optimization in the support of existing customer projects.
NewSenior Electrical Engineer - Industrial - Danvers, MA Michael Page USASenior Electrical Engineer - Industrial - Danvers, MADanvers, MA$125,000–$180,000 / yearFull timeMy client is a global technology leader in semiconductor manufacturing equipment, providing innovative solutions that enable the production of advanced chips used in consumer electronics, automotive applications, communications, and industrial technologies. The Senior Electrical Engineer is responsible for the design, development, and support of complex electrical and electromechanical systems used in advanced semiconductor manufacturing equipment.
Electrical Engineer - Industrial - Salem, MA Michael Page USAElectrical Engineer - Industrial - Salem, MASalem, MA$120,000–$160,000 / yearFull timeWith decades of industry leadership and a strong international footprint, they partner with leading chip manufacturers to drive innovation across industries including automotive, consumer electronics, and communications. The ideal candidate is an experienced electrical engineer with a strong background in hardware design and a proven ability to deliver projects independently.
Specialist, Project Engineering (Space Systems) : Sign-on bonus ($15K max) L3Harris TechnologiesSpecialist, Project Engineering (Space Systems) : Sign-on bonus ($15K max)Wilmington, MA$92,500–$171,500 / yearThis role will be responsible for full lifecycle Project Engineering support for a range of software and hardware development, assembly, and integration and test efforts to deliver critical space-based remote sensing systems for our customers. Understands how to develop a schedule using Earned Value on a program with $5M-$20M in value and manage a project using the Earned Value Indicators on a DCMA surveilled program (highest rigor applied).
NewSenior Regulatory Engineer (onsite) Johnson ControlsSenior Regulatory Engineer (onsite)Westford, MA$100,000–$140,000 / yearJohnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. Backed by advanced technology, lifecycle services and an industry-leading field organization, we elevate customer performance, turn goals into real-world results and help move society forward.
Engineering Manager - Mold Design & Tooling GCR Professional ServicesEngineering Manager - Mold Design & ToolingStoughton, MassachusettsThe position supports both new product development and sustaining engineering activities, with specific focus on injection-molded connector components, TPU/TPE over-molded parts, and low-pressure molded interim shot tooling. Position is responsible for providing senior-level mold design, tooling, and design-for-manufacturability (DFM) expertise and department leadership in support of medical cable assembly and connector products.
NewSr. Process Engineer Johnson ControlsSr. Process EngineerBurlington, MA$97,000–$162,000 / yearYou will be a key contributor across multiple steps of our manufacturing process, which includes areas such as laser cutting, metal-metal bonding, surface characterization/preparation, complex part geometry design, advanced data and computational analysis, and material property optimization. Technical degree (BS/MS) with 7+ years of industry experience, or a PhD with 3+ years of industry experience in Mechanical Engineering, System Engineering, Electrical Engineering, Controls Engineering, Advanced Manufacturing, or a related field.
Electro-Mechanical Technician (Electrical) Matec Instrument Companies, Inc.Electro-Mechanical Technician (Electrical)Northborough, MA$23–$29 / hourWe’re looking for a hands-on Electrical Technician to join our team building large, custom ultrasonic testing machines used in real-world industrial applications. Perfect for electrical techs, panel builders, industrial electricians, or anyone who enjoys wiring and bringing complex machines to life.
NewQuality Manager Michael Page USAQuality ManagerMilford, MA$115,000–$120,000 / yearFull timeLead root cause investigations on machining and manufacturing issues using structured problem-solving tools (5 Whys, FMEA, etc.). Analyse key quality data (scrap, rework, yield, returns) to identify trends and implement improvements.
Director of Electrical and Systems Engineering - Lowell, MA Michael Page USADirector of Electrical and Systems Engineering - Lowell, MANewburyport, MA$200,000–$250,000 / yearFull timeWith a strong mission‑led culture, the business is focused on developing highly reliable, regulated systems that expand access to life‑saving therapies, while fostering a collaborative, engineering‑led environment where technical excellence and continuous improvement are central to success. The Director of Electrical and Systems Engineering position is a senior engineering leadership role responsible for shaping the electrical and systems architecture of advanced medical devices from concept through commercialization.