May 11, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
June 3, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
This position will require frequent coordination with Planning & Production Control, Design Engineers, Manufacturing Engineers at other sites, and Operations Leads to ensure that mBOMs are up to date, design tooling that will be needed for manufacturing, lead times are documented, and work order instructions will be available when needed and that proper documentation is in place for floor operations. June 12, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
May 13, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com.
Huntsville, AL30+ days ago
Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Leidos Defense Systems Sector / Manufacturing provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide.
p>Job Description: As a new graduate in the Manufacturing Engineering role, you will assist in supporting the production of high-reliability electronic hardware for Tactical Satellite equipment, including SMT(Surface Mount Technology) solder assembly, mechanical integration, and environmental testing.
Qualifications:
- To be eligible, applicants must be pursuing a bachelor's degree in mechanical engineering, electrical Engineering, chemical Engineering, Industrial Engineering or related field or have completed their bachelor's degree within the last 12 months, regardless of age.
Huntsville, AL21 days ago
Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Huntsville, AL13 days ago
Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.
Huntsville, AL30+ days ago
Key Job Responsibilities: Manage day-to-day responsibilities of various workstream teams by creating complete capital and project execution plans, with defined scope, success criteria, schedule, financial, risk, and plant readiness plans. Project types may include new product development, mid-capital improvement investments, manufacturing process development and implementation efforts at various production plants, and manufacturing footprint initiatives.
Huntsville, AL22 days ago
Job Description: We are seeking a Specialist, Composites Manufacturing Engineer, to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL, which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
p>Job Description: We are seeking a Senior Associate, Composites Manufacturing Engineer to work at our new state-of-the-art Advanced Manufacturing Facility (AMF-South) in Huntsville, AL, which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Specialist, Manufacturing Engineer (Compression Molding) to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL, which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. Essential Functions:
- Provide expert-level knowledge in compression molding operations using a variety of materials (rubber, pre-preg carbon cloth, chopped fiber broadgoods, etc.).
Huntsville, AL13 days ago
p>Job Description: We are seeking a Lead, Composites Manufacturing Engineer, to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL, which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Huntsville, AL30+ days ago
The Engineer will be responsible for independently applying engineering theories and principles, managing moderately complex or contributing to complex projects in the design of process and support of products in a systems and solutions manufacturing environment. From tactical communications systems to airborne communications and information processing, we deliver high-reliability solutions that keep our first responders and war-fighters connected and protected in the field.
Huntsville, AL30+ days ago
The Engineer will be responsible for independently applying engineering theories and principles, managing moderately complex or contributing to complex projects in the design of process and support of products in a systems and solutions manufacturing environment. From tactical communications systems to airborne communications and information processing, we deliver high-reliability solutions that keep our first responders and war-fighters connected and protected in the field.
Huntsville, AL30+ days ago
Experience in conducting and executing electronics and Missile tests, including functional testing (front-end, back-end, and performance testing), baseline ambient, full functional, thermal vacuum, system end to end testing, and ground station compatibility testing. As a Test Engineer you will participate in leading in the planning/execution of electrical floor operations and will be responsible for developing automated test scripts, procedures, and other documentation needed to conduct missile instrument testing at all factory site locations.
Requires broad management and cross-functional leadership knowledge and mastery level knowledge within a specific technical area or broad expertise across multiple related job areas. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
li>Previous experience in one or more of the following process areas: Vacuum Deposition/ Thermal/ Laser/ Wetline/ Automation/ Adhesive/ Welding/ Material Handling/ Robotics/ Vision Systems/ PLC Programming among others. All associates working on the production floor may be required to wear a respirator at any given time and thus, the ability to wear a respirator is a condition of employment and continued employment (requires little or no facial hair).
Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) as a condition of employment and continued employment (requires little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) as a condition of employment and continued employment (requires little or no facial hair). 20/40 vision in each eye separately and both eyes (with or without correction), the ability to distinguish between red, yellow, and green and peripheral vision >70 degrees is required.
Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) as a condition of employment and continued employment (requires little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Huntsville, AL30+ days ago
Our current groups include: • Africa, Middle East, Central Asia Network • Black Employees at Lilly • Chinese Culture Network • Japanese International Leadership Network (JILN) • Lilly India Network • Organization of Latinx at Lilly (OLA) • PRIDE (LGBTQ+ Allies) • Veterans Leadership Network (VLN) • Women's Initiative for Leading at Lilly (WILL) • enAble (for people with disabilities).
• Experience in Manufacturing, Development, QC, Technical Services, Engineering, or Regulatory Affairs • Proficient in statistical analysis and computer applications • Strong interpersonal, communication, and networking skills • Ability to influence diverse teams and manage multiple priorities • Demonstrated problem-solving and analytical thinking.
li>Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) as a condition of employment and continued employment (requires little or no facial hair). Basic Job Functions:
Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) as a condition of employment and continued employment (requires little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Huntsville, AL22 days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Huntsville, Alabama14 days ago
June 11, 2026For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Huntsville, AL30+ days ago
Our robust portfolio of offerings across the defense, space, civilian, and intelligence markets includes secure high-end solutions in mission IT, enterprise IT, engineering services, and professional services. The candidate must have experience in supporting a multi-disciplinary fabrication shop with proficiency in sheet metal fabrication, sheet metal and general welding, fixture concepts, press brake operation and more.
Huntsville, AL15 days ago
The MPM works within a matrix organization and is responsible to coordinate the necessary resources with various manufacturing Leaders & Program Managers to ensure the program executes to customer requirements and documented execution plans for cost and schedule. Hands-on technical experience with Product Life Management, Configuration Management, and Enterprise Resource database management systems (e.g., Costpoint & LENS), interface tools, and reporting.
Huntsville, AL30+ days ago
p>Leidos Defense Systems Sector / Manufacturing provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide. Leidos' Defense Systems Electronics Manufacturing is seeking a Senior Level Electronics Manufacturing Program Manager to guide and oversee Critical and Strategic Program Portfolios.
Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) and a condition of employment and continued employment (may require little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) and a condition of employment and continued employment (may require little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) and a condition of employment and continued employment (may require little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
li>Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) and a condition of employment and continued employment (may require little or no facial hair). Basic Job Functions:
- Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) and a condition of employment and continued employment (may require little or no facial hair). Basic Job Functions: Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
li>Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) and a condition of employment and continued employment (may require little or no facial hair). Basic Job Functions:
- Assist in the installation and qualification of systems, troubleshoot day-to-day manufacturing issues, identify, and/or implement system improvements that contribute to the achievement of throughput, yield, and product performance goals.
Huntsville, Alabama20 days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. This role requires deep CNC process engineering expertise: developing machining strategies and CAM programming approaches, optimizing toolpaths and cutting parameters for difficult-to-machine aerospace alloys, qualifying machining processes, and providing real-time engineering support during first-article and production runs.
Huntsville, AL30+ days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. This role requires deep CNC process engineering expertise: developing machining strategies and CAM programming approaches, optimizing toolpaths and cutting parameters for difficult-to-machine aerospace alloys, qualifying machining processes, and providing real-time engineering support during first-article and production runs.
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Huntsville, Florida30+ days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. If you share our passions and vision, thrive in a dynamic startup environment, excel with integrated multi-functional teams of individuals, are experienced and skilled in several relevant technologies (even if perhaps not in the aerospace industry), and continuously seek out opportunities to learn and improve, then we would love to hear from you!
IERUS develops value for our defense and commercial customers through accelerations of the technology life cycle: identifying, creating, transitioning, and producing technologies with integrity of purpose and product. Experience in Aerospace manufacturing reviewing engineering, producibility, writing work instructions/SOPs, Windchill EPDM, Creo, SAP experience is a plus.
Huntsville, Florida10 days ago
and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Huntsville, AL30+ days ago
li>Play a pivotal role in the creation of a great working environment, support with fast paced, effective engineering and be a key person in helping the office run as smoothly as possible. As part of Gravitilab you would be part of a rapidly growing team, working at the cutting edge of technology, at the apex of a revolution taking place in the commercial New Space economy.
p>Essential Responsibilities: Provide daily hands-on support to shop floor personnel to help facilitate problem-solving and process improvements related to production or development labs.
The Manufacturing Engineering Development Program (MEDP) is a 2-year development program in manufacturing focused on developing and accelerating technical expertise across the Supply Chain.
Huntsville, AL30+ days ago
p>Description: This position is part of the Amentum Space Exploration Division (ASED) support to the NASA EM32 Welding & Manufacturing (W&M) team under the Engineering Services and Science Capability Augmentation (ESSCA) contract to the NASA MSFC Engineering Directorate. Requires standing, sitting and walking in a lab environment with hazards that require wearing safety glasses, hard hat, hearing protection, foot protection, gloves and/or protective clothing to perform some operations (60%).
Huntsville, Alabama30+ days ago
p>This position is part of the Amentum Space Exploration Division (ASED) support to the NASA EM32 Welding & Manufacturing (W&M) team under the Engineering Services and Science Capability Augmentation (ESSCA) contract to the NASA MSFC Engineering Directorate. Requires standing, sitting and walking in a lab environment with hazards that require wearing safety glasses, hard hat, hearing protection, foot protection, gloves and/or protective clothing to perform some operations (60%).