Mechanical Engineer CE-1.1.5 CredenceMechanical Engineer CE-1.1.5WPAFB, OHPrepare, develop or review design calculations, cost estimates, schedules, underlying analysis, technical drawings, and specifications related to a wide variety of projects and mechanical systems, to include plumbing (potable water and sanitary sewer); Heating, Ventilation, and Air Conditioning (HVAC); fire suppression, control, and alarm systems; IICS and other systems of major size and complexity for use in multi-story office buildings, large steam plants, hospitals, hangars, flight simulators, and similar structures. Familiarity with cost estimates, schedules, underlying analysis, technical drawings, and specifications related to a wide variety of projects and mechanical systems, to include plumbing (potable water and sanitary sewer); Heating, Ventilation, and Air Conditioning (HVAC); fire suppression, control, and alarm systems; IICS and other systems of major size and complexity for use in multi-story office buildings, large steam plants, hospitals, hangars, flight simulators, and similar structures.
Mechanical/Electrical Engineer Transformer Designer WestrafoMechanical/Electrical Engineer Transformer DesignerKettering, OHPurpose: This role focuses on the design and optimization of power transformers, supporting the transition to smart grids, renewable energy integration, and advanced digital monitoring systems. Design mechanical components and assemblies to meet performance, safety, and cost requirements for medium and high voltage transformers with a maximum voltage of 69KV and power up to 20 MVA.
NewPosition, Navigation, and Timing (PNT) Engineering Support F-16 WAM (Top-Secret) CredencePosition, Navigation, and Timing (PNT) Engineering Support F-16 WAM (Top-Secret)Wright-Patterson Air Force Base, OHSupport engineering and technical requirements derivation, design, development, integration, verification, qualification for airworthiness certification, and fielding of F-16 PNT systems, including Inertial Navigation Systems (INS), transponders, Global Positioning System (GPS), and other forms of alternate PNT as defined in, or derived from, program requirements. Credence has an immediate opening for an Position, Navigation, and Timing (PNT) Engineering Support at the senior level who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at Wright Patterson AFB, OH.
NewAvionics Software Engineering Support F-16 WAM (Top-Secret) CredenceAvionics Software Engineering Support F-16 WAM (Top-Secret)Wright-Patterson Air Force Base, OHCredence has an immediate opening for an Avionics Software Engineering Support at the senior level who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at Wright Patterson AFB, OH. For engineering positions, must have successfully completed an undergraduate degree with a major in engineering from a college or university with an Accreditation Board for Engineering and Technology (ABET) accredited engineering program for the degree requirements of the position, such as electrical, mechanical, or aerospace engineering.
NewAvionics Hardware Engineering Support F-16 WAM (Top-Secret) CredenceAvionics Hardware Engineering Support F-16 WAM (Top-Secret)Wright-Patterson Air Force Base, OHCredence has an immediate opening for an Avionics Hardware Engineering Support at the senior level who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at Wright Patterson AFB, OH. Support next-generation mission computer procurement and integration, including recommending best practices for implementing new software and hardware solutions and applying a thorough understanding of industry computer, firmware, memory, CPU, GPU, and middleware solutions.
NewCivil Engineer EN-8.42 CredenceCivil Engineer EN-8.42WPAFB, OHPrepare, develop and/or review design calculations, cost estimates, schedules, underlying analysis, technical drawings, and specifications related to a wide variety of projects and mechanical systems, to include plumbing (potable water and sanitary sewer); Heating, Ventilation, and Air Conditioning (HVAC); fire suppression, control, and alarm systems. Perform planning and design work for multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of mechanical and/or civil engineering concepts, principles, and practices.
NewLead Transmission Line Engineer LeidosLead Transmission Line EngineerDayton, OH$92,300–$166,850Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities.
NewPrincipal Engineer DCS CorporationPrincipal EngineerDayton, OHThe DCS Air and Space Technology Sector are seeking a qualified candidate to apply advanced knowledge in the areas of MBSE engineering, computer science, and information technology for the technical design, development, and maintenance of complex programming projects supporting the National Air and Space Intelligence Center (NASIC). Candidates will also contribute to the design and development of AI/ML pipelines that assist analysts in generating, validating, and enhancing model‑based systems engineering (MBSE) products, enabling more efficient model creation, improved data consistency, and accelerated analytic workflows.
NewGEOINT Systems Engineer Support - Imaging and Targeting Support (I&TS) DCS CorporationGEOINT Systems Engineer Support - Imaging and Targeting Support (I&TS)Beavercreek, OHThe Candidate will assist in supporting and conducting engineering performance, effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical/schedule risk assessment, and scheduling trade-off studies. A Master’s or Doctorate Degree in a related field and at least 20 years of experience, 12 years of which must be in the DoW/DoD; Bachelor’s degree and 25 years of experience in the respective technical/professional discipline being performed, 15 years of which must be in the DoW/DoD; or 30 years directly related experience, 20 years of which must be in the DoW/DoD.
Senior Kinetics DE/CD Engineer LeidosSenior Kinetics DE/CD EngineerBeavercreek, OH$131,300–$237,350Leidos’ Defense Systems Kinetics Business Area is seeking a Senior Digital Engineering and Computational Dynamics Engineer to join our team as part of the Strategic High-speed Advanced Development Organization. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com .
NewEntry Level Diesel Technician/Mechanic III Penske Truck RentalEntry Level Diesel Technician/Mechanic IIISPRINGFIELD, OHWillingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. • Doing preventative maintenance repairs—like replacing or rotating tires—and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles.
Engineering Technician - Mechanical Chenega CorporationEngineering Technician - MechanicalWright-Patterson AFB, OHProduce workable designs from rough sketches or verbal descriptions that include, but are not limited to, the design of mechanical components related to high-speed rotating machinery and the design of lightweight structures involving sophisticated manufacturing and assembly procedures, and detailed technical drawings on HVAC systems. Chenega Analytic Business Solutions (CABS) provides federal agencies and commercial customers with trusted insights into Records and Information Management, Administrative Solutions, Information Technology, Engineering, and Training.
Mechanical Engineering Technology - Part-Time (Adjunct) Faculty SInclair Community CollegeMechanical Engineering Technology - Part-Time (Adjunct) FacultyOHJob Title Mechanical Engineering Technology - Part-Time (Adjunct) Faculty Location Multiple Locations, OH Job Number 04780 Department Mechanical Engineering Technology Job Category Adjunct Faculty (Part-time) Job Type Full-Time Status Regular Job Open Date 05/18/2026 Resume Review Date Ongoing Closing Date 08/31/2026 Open Until Filled No Position Summary. The Mechanical Engineering Technology Department is currently seeking part-time (adjunct) faculty to teach face-to-face for day, evening, and weekend courses at our downtown Dayton campus and/or area High School Partners.
NewMechanical Engineering Technician: High-Precision Systems Chenega CorporationMechanical Engineering Technician: High-Precision SystemsDayton, OHThe ideal candidate should have an Associate degree in Mechanical Engineering and 4+ years of relevant experience, with proficiency in CAD/CAE software including SolidWorks and AutoCAD. Chenega Corporation is seeking an Engineering Technician – Mechanical to provide mechanical engineering services at Wright-Patterson AFB.
Mechanical Engineering Co-op (Fall 2026) Regal Rexnord CorpMechanical Engineering Co-op (Fall 2026)OHThe Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. The Engineering Co-op Student provides mechanical and/or electrical design support in the development of new components and products as well as in the improvement in performance, reliability and cost of existing components and products.
Mechanical Engineering Intern Applied OptimizationMechanical Engineering InternFairborn, OHTo support an interdisciplinary research and development team that collects data, analyzes experimental data, and implements new generation scientific algorithms in the areas of mechanical engineering and material science, or space science. Basic computer and software skills including but not necessarily limited to Microsoft Office products (e.g., Outlook, Word, Excel, and Power Point).
Mechanical Engineering Co-op - Spring 2027 Midmark CorpMechanical Engineering Co-op - Spring 2027OHParticipates in cross-functional teams, involving daily tasks such as attending meetings, project activities, problem analysis, manufacturing or quality troubleshooting, and communication with stakeholders. EDUCATION and/or EXPERIENCE: Enrollment in a 4-year accredited degree program is required, with a focus on obtaining a Bachelor's degree in mechanical engineering, manufacturing engineering, or a related field.
Mechanical Engineering Intern - Fall 2026 Johnson Electric Holdings LtdMechanical Engineering Intern - Fall 2026Vandalia, OH$20–$26 / hourWe are committed to providing an inclusive, diverse and equitable workplace where employees of different backgrounds feel valued and respected, regardless of their age, gender, race, ethnicity or religious background. Participate in and select 2-3 hands-on projects related to: Engineering (Mechanical, Application, Electrical, Process, Medtech), Quality, Operations Leadership.
Engineering Co-op - Mechanical Regal Rexnord CorpEngineering Co-op - MechanicalOHThe Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. The Engineering Co-op Student provides mechanical and/or electrical design support in the development of new components and products as well as in the improvement in performance, reliability and cost of existing components and products.
Adjunct - Mechanical & Materials Engineering (Fall 2026 - Summer 2027) Wright State UniversityAdjunct - Mechanical & Materials Engineering (Fall 2026 - Summer 2027)Dayton, OHTobacco use, including the sale, advertising, sampling, and distribution of tobacco products and tobacco-related items, is prohibited in all university facilities on all university-owned or leased grounds, university-owned or operated residence halls and apartments, and at all university-sponsored events regardless of location. WSU Careers website Academic Careers Academic Keys Chronicle Diversity in Higher Ed Diverse Issues in Higher Ed Facebook HBCU Higher Ed Jobs Inside Higher Ed LinkedIn Social Media Personal referral Women in Higher Ed Other Job Fair or Hiring Event.
Mechanical Engineer Elite Recruiting CoMechanical EngineerDayton, OhioPlan and execute the development and refinement of 3D Technical Data Packages (3D TDPs) with a cross-functional engineering team to aid in part procurement and manufacturing activities, including value-added and reverse engineering activities. Work with Supply Chain, Manufacturing, and Quality Engineers to identify design, manufacturing, and procurement complexities and schedule engineering activities based on priority and need dates.
Mechanical Engineer (Copy) Elite Recruiting CoMechanical Engineer (Copy)Dayton, OhioPlan and execute the development and refinement of 3D Technical Data Packages (3D TDPs) with a cross-functional engineering team to aid in part procurement and manufacturing activities, including value-added and reverse engineering activities. Work with Supply Chain, Manufacturing, and Quality Engineers to identify design, manufacturing, and procurement complexities and schedule engineering activities based on priority and need dates.
Mechanical Engineer Belcan LLCMechanical EngineerMiddletown, OH$34–$50 / hourJob Summary: We are seeking a Mechanical Engineer with 3-5 years of experience to support the design, development, production, and continuous improvement of advanced RF products and systems supporting Department of Defense (DoD) applications. Preferred Qualifications: Experience supporting RF products and systems, including power amplifiers, RF filters, low-noise amplifiers, upconverters, and downconverters.
Mechanical Engineer Palmer Manufacturing and Supply, Inc.Mechanical EngineerSpringfield, OH$75,000–$90,000 / yearKnown for heavy-duty, long-lasting machinery and exceptional service, Palmer offers a wide range of products, including sand mixers, thermal and mechanical sand reclamation systems, molding systems, and complete foundry layout services. Ability to sit and/or stand/walk for extended periods of time; navigate stairs and congested workspaces several times daily; bend, kneel, & reach overhead.
Mechanical Engineer BelcanMechanical EngineerMiddletown, OH$34–$50 / hourPreferred Qualifications: * Experience supporting RF products and systems, including power amplifiers, RF filters, low-noise amplifiers, upconverters, and downconverters. Job Responsibilities: * Serve as the lead Mechanical Engineer on assigned programs, ensuring designs and product performance meet customer requirements and specifications.
Senior Mechanical Engineer Avery Dennison CorpSenior Mechanical EngineerMiamisburg, OHSimulations, Problem Solving & Communication: Oversee complex mechanical simulations (including Thermal Flow, Strain/Stress, FEA, and Torque analysis), champion methodical problem solving using structured approaches (mental models, DOE, test tools), and effectively communicate project status, architectural decisions, and risks to cross-functional teams. In this onsite role at our Miamisburg, OH facility, your key responsibilities will be: End-to-End Product Lifecycle & Documentation: Lead the end-to-end design, analysis, and validation of new mechanical products and sub-assemblies from initial concept through to mass production on-site at our Miamisburg, OH facility, while taking full ownership of flawless manufacturing data package delivery and assembly drawing creation.
Principal Mechanical Engineer Sierra Nevada CorpPrincipal Mechanical EngineerDayton, OHJoin the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems.
Sr Mechanical Engineer Sierra Nevada CorpSr Mechanical EngineerMiamisburg, OHThe ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support.
Associate Mechanical Engineer University of Dayton, OhioAssociate Mechanical EngineerDayton, OhioThis engineer will also work with teams to design, develop and test machine hardware and software, customize existing machinery as well as new technologies. This position will focus on novel erosion testing for the AFRL Erosion Test Facilities at Wright-Patterson AFB, operated and maintained by UDRI.
Mechanical Engineer Workplace Modular Systems LLCMechanical EngineerMiamisburg, OHThis role is well‑suited for a hands‑on engineer who enjoys turning designs into real, buildable hardware and thrives in a fast‑growing, high‑accountability environment. You'll collaborate closely with electrical, manufacturing, and vendor partners to bring high‑quality, production‑ready products from concept through validation.
Facility Mechanical Engineer Advisor Riverside Research InstituteFacility Mechanical Engineer AdvisorDayton, Ohio$135,000–$175,000 / yearThe contractor will provide expertise for facility planning and operation in compliance with regulatory codes, such as the United Facility Code (UFC), Architectural Barriers Act (ABA), National Fire Protection Association (NFPA), and National Electric Code (NEC) for all SCIF modification and construction projects. Responsibilities: •The Contractor shall apply Intelligence Community Directive (ICD) 705 requirements to ensure ICD 705 compliance of construction designs and plans and coordinate construction contractor-customer interfaces during construction.
Mechanical Engineer III Sierra Nevada CorpMechanical Engineer IIIDayton, OHThe ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support.
Mechanical Engineer Novacel AmericasMechanical EngineerTroy, OhioStrong problem-solving skills with the ability to anticipate customer needs and develop practical, value-added solutions. The ideal candidate demonstrates a strong commitment to reliability, quality, and continuous improvement, with a mindset that every solution must work correctly the first time and every time.
Mechanical Engineer Intern ACEMechanical Engineer InternMiamisburg, OhioAs a Mechanical Engineering Co-op or Intern, you'll work alongside experienced engineers and gain valuable exposure to product design, manufacturing, customer collaboration, and problem-solving. At American Cutting Edge, we design and manufacture custom industrial blades and cutting solutions used in food processing, packaging, recycling, medical, and other specialized industries.
Engineer Mechanical 3 - 27349 Huntington Ingalls Industries IncEngineer Mechanical 3 - 27349OH$89,325–$92,812 / yearOur workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class.
Facility Engineer (Mechanical) Armada LtdFacility Engineer (Mechanical)Wright-Patterson AFB, OHFull timeProvide expertise for facility planning and operation in compliance with regulatory codes, such as the United Facility Code (UFC), Architectural Barriers Act (ABA), National Fire Protection Association (NFPA), and National Electric Code (NEC) for all SCIF modification and construction projects. The Facility Engineer will apply Intelligence Community Directive (ICD) 705 requirements to ensure ICD 705 compliance of construction designs and plans and coordinate construction contractor-customer interfaces during construction.
Manufacturing Mechanical Engineer Xylem IncManufacturing Mechanical EngineerOHOur products impact public utilities, industrial sectors, residential areas, and commercial buildings, with a commitment to providing smart metering, network technologies, and advanced analytics for water, electric, and gas utilities. Partner with us in creating a world where water challenges are met with ingenuity and dedication; where we recognize the power of inclusion and belonging in driving innovation and allowing us to compete more effectively around the world.
Mechanical Engineer AccelevationMechanical EngineerMiamisburg, OhioThis role is well‑suited for a hands‑on engineer who enjoys turning designs into real, buildable hardware and thrives in a fast‑growing, high‑accountability environment. You’ll collaborate closely with electrical, manufacturing, and vendor partners to bring high‑quality, production‑ready products from concept through validation.
Mechanical/Electrical Engineer Peerless TechnologiesMechanical/Electrical EngineerDayton, OHExperience designing ruggedized/hardened systems for airborne platforms meeting MIL-STD-516 airworthiness and/or MIL-STD-8591 airborne stores criteria. Experience supporting field tests, flight testing, and/or flag exercises using Contractor-Owned Contractor-Operated (COCO) / Government-Owned Government-Operated (GOGO) platforms.
Senior Mechanical Engineer – Rotating Equipment GE AerospaceSenior Mechanical Engineer – Rotating EquipmentDayton, OhioIf you enjoy hands-on engineering, you’ll also have access to a 155,000 sq ft world-class laboratory that includes 6 high-power test cells totaling 15 MW, EMI test chamber, electronics and rapid-build prototype labs, Real-time simulator lab with the latest test and development equipment. GE Aerospace leverages cutting-edge technology, lean manufacturing principles, and decades of expertise to drive innovation in electrical power systems, supporting the industry's transition toward more sustainable and energy-efficient aerospace solutions.
Facility Mechanical Engineer DEFTEC CorporationFacility Mechanical EngineerWright-Patterson AFB, OHFull timeThe Facility Mechanical Engineer supports the mission of providing advanced facility engineering, operations, planning, and programming for NSIC operating locations by ensuring all construction designs, plans, and sustainment programs meet the stringent requirements necessary for secure and compliant SCIF operations. You will be expected to complete construction design reviews for ICD 705 compliance within five business days of receipt, develop monthly mechanical system reliability assessments, identify potential risks and recommend mitigation strategies, and conduct regulatory compliance reviews that achieve 100% validation by government review.
Mechanical Modeling Engineer Leidos Holdings IncMechanical Modeling EngineerDayton, OH$87,100–$157,450 / yearIn this role, the Mechanical Modeling Engineer will construct highly detailed 3-D geometric computer-aided design (CAD) models of multiple foreign spacecraft to include static and dynamic characteristics (e.g., external configuration, layout and location of internal subsystems, antenna and solar panel motion, construction techniques, and materials descriptions). Basic Qualifications: Bachelor's in Mechanical Engineering (or similar equivalent degree) with 4+ years of prior relevant experience or a Master's in Mechanical Engineering (or similar equivalent degree) with 2+ years of prior relevant experience.
NewMechanical Design Engineer GosigerMechanical Design EngineerDayton, OH$80,000–$100,000 / yearResponsibilities Pre-Sale Team Member Roles: development of workable automation conceptscreation of system design and layout concept drawingspreparation of budgets for the mechanical ‘Scope of Work' of the program which includes design and detailing labor cost, purchased and fabricated content, estimating assembly costs, mechanical/controls interfacesPost-Sale Team Roles: timely definition, design and procurement of mechanical components and hardware required for the defined ‘Scope of Work'Formal Design: Assemble pertinent facts and design performance criteriaDefine performance attributes such as speed, space constraints, etc. Incumbent shall be responsible for the complete mechanical design ‘Scope of Work' for automation projects from pre-sale concept and budgets through detailed design and final project implementation.
Mechanical Engineer Resonant SciencesMechanical EngineerDayton, OhioA career at Resonant Sciences means that you will be involved in the complete development life cycle, seeing your design evolve from development prototypes to incorporating mission requirements to technical specifications into a finished product for field testing. The candidate will have an opportunity to be a member of a world-class team consisting of talented and dedicated engineers, technicians, and professionals who work together to interrupt and challenge the status quo to design and develop state-of-the-art technologies.
Senior Mechanical Engineer University of Dayton, OhioSenior Mechanical EngineerDayton, OhioAt least 8 years composites experience with full comprehension of conceptual, or theoretical activities relating to the development, improvement, and usage of materials, coatings, and processes undertaken to build, apply, or shape the materials. The University of Dayton Research Institute (UDRI) is seeking a highly motivated and experienced Senior Mechanical Engineer to join our team.
NewAerospace Mechanical Engineer - Training Systems & Prototyping Delphi TechnologiesAerospace Mechanical Engineer - Training Systems & PrototypingDayton, OH$72,000–$120,000 / yearThe positions involve hands-on engineering in designing high-fidelity simulators and training tools for military applications. A leading engineering firm in Dayton, Ohio is seeking motivated engineers for various mechanical design roles.
Mechanical Engineer - Dayton, OH Messer Construction CoMechanical Engineer - Dayton, OHDayton, OHFounded in 1932, Messer's footprint has grown to eleven regional offices located across the Midwest and Southeast: Greenville, South Carolina; Charlotte and Raleigh, North Carolina; Columbus, Cincinnati, and Dayton Ohio; Louisville and Lexington Kentucky; Indianapolis, Indiana; and Knoxville & Nashville, Tennessee. Your decisions influence your career at every step: Make yours count with Messer Construction Co. In business since 1932 and employee-owned since 1990, Messer builds projects and careers that leave a lasting impact on our communities.
R+D Mechanical Engineer III Midmark CorpR+D Mechanical Engineer IIIOHJOB SUMMARY: Leads and manages complex projects, providing expert guidance on mechanical systems, and oversees advanced design, analysis, and problem-solving. EDUCATION and/or EXPERIENCE: Bachelor''s degree in engineering or related field and 4+ years of relevant experience, or equivalent combination of both.
NewAerospace Mechanical Engineer II: Build Next-Gen Aircraft Sierra Nevada CorporationAerospace Mechanical Engineer II: Build Next-Gen AircraftDayton, OHThis role requires a Bachelor's degree in Mechanical Engineering and at least 2 years of relevant experience.
NewAutomation Mechanical Engineer III - Onsite (Springfield) SilfexAutomation Mechanical Engineer III - Onsite (Springfield)Springfield, OHIdeal candidates will possess a Bachelor's degree in Mechanical Engineering, extensive manufacturing experience, and knowledge in control systems. This full-time position involves implementing automated systems, developing reliability strategies, and collaborating with cross-functional teams.