ECLARONewSr. Network Engineer ECLAROSr. Network EngineerMelbourne, FL$65–$70 / hourPosition Overview:The Senior Network Engineer is responsible for the daily operation and maintenance of LAN & WAN networks, including Cisco and Palo Alto hardware and software maintenance, core services installation, and troubleshooting services. Responsibilities: Planning & Design:Create and maintain high- and low-level network design documentation and drawings to guide implementation, operations and future growth.
aap3Sr Network Engineer aap3Sr Network EngineerMelbourne, FLFull timeThe Senior Network Engineer is responsible for the daily operation and maintenance of LAN & WAN networks, including Cisco and Palo Alto hardware and software maintenance, core services installation, and troubleshooting Satcom Direct Government and services. This role involves designing, installing, and optimizing network infrastructure across multiple locations to enhance efficiency and reduce costs.
Adex CorporationNewIP Tier 3 Network Engineer Adex CorporationIP Tier 3 Network EngineerMelbourne, FLThe Tier 3 network engineer handles the highest level of network escalation tickets and needs to fully understand the network architecture, be calm under pressure, and be very skilled at network troubleshooting. As an IP Network Engineer, candidates will support supervision of network equipment and service order installation and activations.
LanceSoft IncNetwork Planning Engineer LanceSoft IncNetwork Planning EngineerMelbourne, FL$70.05–$70.05 / hourWork independently on projects from start to finish, including developing network designs based upon user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. • Experience configuring MPLS, ISIS, QoS, BGP, VPLS, AS prepending, route policies, and in-depth BGP troubleshooting and configuring (Route-leaking, BGP attributes (local preference and community’s)) using Cisco XR code.
NextechNetwork Engineer NextechNetwork EngineerMelbourne, FloridaResponsibilities: Contributes to the design of short- and long-term strategic plans to ensure infrastructure capacity meets both current and future requirements, and leads the execution of those plans once approved. Qualifications: Contributes to the design of short- and long-term strategic plans to ensure infrastructure capacity meets both current and future requirements, and leads the execution of those plans once approved.
CMS NexttechNetwork Engineer CMS NexttechNetwork EngineerMelbourne, FLContributes to the design of short- and long-term strategic plans to ensure infrastructure capacity meets both current and future requirements, and leads the execution of those plans once approved. Five+ years’ experience with Cisco layer 2 and layer 3 switch configuration and administration as well as hands on Cisco IOS routing, switching, and VLAN / ACL experience.
L3Harris TechnologiesNewAssociate, Network Planning Engineer L3Harris TechnologiesAssociate, Network Planning EngineerMelbourne, FLWork independently on projects from start to finish, including developing network designs based upon user requirements, creating network diagrams using Visio, configuring network equipment, and full implementation follow-through and documentation of requirements. Qualifications:To be eligible, applicants must be pursuing a Bachelor's Degree in Information Technology/Computer Information Systems, Electrical Engineering, Computer Engineering with network focus, Computer Science with Communications/Network Focus or have completed their Bachelor's degree within the last 12 months, regardless of age.
LanceSoft IncNetwork Planning Engineering LanceSoft IncNetwork Planning EngineeringMelbourne, FLFull time6+ years of network engineering experience with IP networks or, a 4-year Bachelor of Science degree with 3+ years relevant experience with IP networks • Experience implementing the network design, testing and building an enterprise network • Experience architecting local area networks, wide area networks, and intranets, for large distributed communications systems • Experience peering with Tier 1 Internet Service providers, troubleshooting routing within the Internet (experience with looking glass sites) • Must be able to demonstrate the ability to configure, implement and support IP network infrastructure • Experience configuring MPLS, ISIS, QoS, BGP, VPLS, AS prepending, route policies, and in-depth BGP troubleshooting and configuring (Route-leaking, BGP attributes (local preference and community’s)) using Cisco XR code • Experienced configuring and troubleshooting OSPF redistribution, costs, and route-maps using Cisco XE code • Experience with Cisco ASR903, ISR3, ASR99xx routers and Cisco Nexus switches. The Network Tier 3 Engineer will be responsible for: • Evaluate technologies and designs in relation to the critical infrastructure and service needs for external customers • Implement solutions that support customer visions and objectives • Participate in inter program initiatives and discussions to resolve technical challenges • Create and maintain documentation and training for engineering and NOC teams • Maintain operational excellence of network system and components to exceed customer expectations • Define and implement best practices for network and capacity management • Identify areas of opportunity for automation and network optimization • Routinely perform proof of concepts and service trials while documenting system integration • Travel as required to meet for requirement meetings and system integration planning Qualifications: • Bachelor of Science in Electrical Engineering, Telecommunication Engineering, Computer Science, Computer Information Systems or equivalent of a 4-year accredited degree in a technical discipline.
Insight GlobalNewCPE Network Engineer Insight GlobalCPE Network EngineerMelbourne, FLThe Engineers will be responsible for planning and design of the customer premise equipment to support the telecommunications solution and reviewing Site Surveys to ensure understanding of all the site details to design the Customer Premise Equipment (CPE). Domain knowledge of the Telecommunications industry, including carrier services, provisioning terminology, CISCO routers and network infrastructure and IP technologies such as Pseudo Wire and Ethernet switching.
LanceSoft IncNetwork Planning Engineering - Contractor - L2 LanceSoft IncNetwork Planning Engineering - Contractor - L2Melbourne, FL$45–$50 / hourBachelor of Science in Electrical Engineering, Telecommunication Engineering, Computer Science, Computer Information Systems or equivalent of a 4-year accredited degree in a technical discipline. Domain knowledge of data protocols including TCP/IP, DMVPN, BGP, OSPF, MPLS, EIGRP, HSRP, IS-IS, LDP, PIM, MSDP, and layer 2 Ethernet.
ADEXNewNetwork Planning Engineer (Telecom Circuit Design) ADEXNetwork Planning Engineer (Telecom Circuit Design)Melbourne, FLA Network Planning Engineer's (Telco Engineer) role will be a crucial part in evaluating, planning, and implementing a cutting-edge telecommunications network design tailored to mission-critical needs. Domain knowledge of the Telecommunications industry, including carrier services, provisioning terminology, CISCO routers and network infrastructure and IP technologies such as Pseudo Wire and Ethernet switching.
LancesoftNetwork Planning Engineering - Cleared Contractor - L1 LancesoftNetwork Planning Engineering - Cleared Contractor - L1Melbourne, FLWork independently on projects from start to finish, including planning and design of the customer premise equipment to support the telecommunications solution for the Remote Telecommunication Infrastructure Replacement (RTIR) project required to implement equipment and services deliverables for the FTI Network. Customer Premise Equipment (CPE) Network Engineer responsibilities: •Planning and design of the customer premise equipment to support the telecommunications solution for the Remote Telecommunication Infrastructure Replacement (RTIR) project.
Adex CorporationNewNetwork Planning Engineer (Telco Engineer) Adex CorporationNetwork Planning Engineer (Telco Engineer)Melbourne, FLA Network Planning Engineer’s (Telco Engineer) role will be a crucial part in evaluating, planning, and implementing a cutting-edge telecommunications network design tailored to mission-critical needs. Domain knowledge of the Telecommunications industry, including carrier services, provisioning terminology, CISCO routers and network infrastructure and IP technologies such as Pseudo Wire and Ethernet switching.
LanceSoft IncNetwork Planning Engineering - Cleared Contractor - L2 LanceSoft IncNetwork Planning Engineering - Cleared Contractor - L2Melbourne, FL$50–$50 / hourQualifications: • Bachelor of Science in Electrical Engineering, Telecommunication Engineering, Computer Science, Computer Information Systems or equivalent of a 4-year accredited degree in a technical discipline. • Domain knowledge of data protocols including TCP/IP, DMVPN, BGP, OSPF, MPLS, EIGRP, HSRP, IS-IS, LDP, PIM, MSDP, and layer 2 Ethernet.
Adex CorporationNewOptical Transport Engineer (IXC) Adex CorporationOptical Transport Engineer (IXC)Melbourne, FLProvision Optical IXC circuits using Cisco Prime Optical (CPO) or Cisco Transport Controller (CTC) and configure ancillary equipment for delivery of sub-rate circuits (e.g., RAD RICi-16/EGATE-100, Cisco ASR1002/1001-X router port configurations including T3/T1 SIP/SPA, DNX-11/88 port configurations, etc.). Work directly with IXC Deployment Team, IXC Engineering, Telco circuit and network design engineers, and Telco Carrier Provisioning/Circuit designs with team personnel to accurately document circuit designs on Optical networks.
L3HarrisNewNetwork Planning Engineer L3HarrisNetwork Planning EngineerPalm Bay, FL$122,000–$227,000 / yearQualifications: Bachelor's Degree and minimum 9 years of prior relevant experience, with 5-8 years of network engineering lead experience with IP Networks, and 3-5 years supporting MPLS networks. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
yochanaNewNetwork Engineer - SME yochanaNetwork Engineer - SMEMelbourne, FLCandidate having over 10 years of experience, emphasizing skills in designing and maintaining complex network infrastructures, particularly in SDWAN, ACI, and NSX environments. PRINCIPAL ACCOUNTABILITIES Work closely with the client and other track teams to obtain technical knowledge and to permanently solve chronic problems.
LanceSoft IncNetwork Planning Engineering - Cleared Contractor - L4 LanceSoft IncNetwork Planning Engineering - Cleared Contractor - L4Melbourne, FLContractorMicro-segmentation of service flows to enable sharing of untrusted segments of the network • Application of policies to enable network flow performance prioritization, monitoring, and visibility • Automated network path selection for optimization of application performance • Packet replication across multiple network access segments to improve overall service robustness • Next-Generation firewall and intrusion detection/prevention capabilities for edge devices • Conduct advanced security analytics for encrypted networks • Willingness to stay updated with the latest trends and advancements in SD-WAN and networking technologies • Collaborate with SE, Security, and I&T teams to integrate SD-WAN within existing network architecture • Troubleshoot and resolve network issues related to SD-WAN • Develop and maintain comprehensive documentation for SD-WAN configurations, processes, and procedures • Ensure compliance with security policies and procedures related to network management • Design, engineer, and implement SD-WAN solutions that support customer requirements and critical backbone architecture • Create SD-WAN network documentation and training as required for supporting engineering and NOC teams • Routinely perform proof of concepts and service trials while documenting system integration Qualifications: • Bachelor of Science in Networking, Information Technology, Electrical Engineering, Telecommunication Engineering, Computer Science, Computer Information Systems or equivalent of a 4-year accredited degree in a technical discipline • 10+ years of experience in network engineering, with a focus on SD-WAN technologies • 8+ years of experience in the design, development, and implementation of SD-WAN network architectures • Strong knowledge of SD-WAN solutions from leading vendors (e.g., Cisco Viptela, VMware VeloCloud, Fortinet, Silver Peak) • Understanding of TCP/IP, routing, switching, and network protocols • Knowledge of traditional WAN technologies (MPLS, VPN, etc.) • Ability to work with clients to understand their needs and provide tailored solutions • Excellent verbal and written communication skills to explain complex technical concepts to non-technical stakeholders • Excellent problem-solving and analytical skills • Strong communication and interpersonal skills • Ability to work independently and as part of a team • Advanced presentation and technical writing experience • Strong skill set with Microsoft Office software applications and Visio Job Title: Network Planning Engineer Job Location: Melbourne, FL Duration: 12 months Job Description: • Design and implement SD-WAN solutions to enhance network performance and reliability • Manage and monitor SD-WAN infrastructure, ensuring optimal performance and uptime • Extensive experience with leading SD-WAN solutions from vendors like Cisco, VMware (VeloCloud), Fortinet, Silver Peak, etc.