Manufacturing Engineer Falcon & Dragon Space Exploration Technologies CorpManufacturing Engineer Falcon & DragonHawthorne, CA$100,000–$117,500 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You will work on launch vehicles and spacecraft that deliver satellites into Earth''s orbit, ferry humans to and from the International Space Station, and ultimately extend humanity's reach beyond the Earth and moon.
NewManufacturing Engineering Intern (Summer 2027) Impulse Space Propulsion Inc.Manufacturing Engineering Intern (Summer 2027)Redondo Beach, CAAs a Manufacturing Engineering Intern, you will work across all aspects of manufacturing and assembling spacecraft components, taking them from development test articles to high volume production, while working along side a fast-paced, agile team. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Lead Manufacturing Engineer (PCBA) Impulse Space Propulsion Inc.Lead Manufacturing Engineer (PCBA)Redondo Beach, CA$140,000–$180,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Impulse Space's spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR).
Manufacturing Technician - IGIV Bulk Grifols SAManufacturing Technician - IGIV BulkLos Angeles, CA$21.50–$22 / hourResponsible for performing the following daily tasks: cleaning/ sanitizing aseptic and non-aseptic processing areas, preparing and sterilizing filling and freeze-drying components (such as vials, stoppers, and filling assemblies), and performing aseptic fills. Third Party Agency and Recruiter Notice: Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department.
Supplier Development Engineer, Manufacturing Raptor Space Exploration Technologies CorpSupplier Development Engineer, Manufacturing RaptorHawthorne, CA$100,000–$130,000 / yearOwn the new product introduction of new parts and assemblies on the rocket, including determining the ideal manufacturing method, identifying and reviewing suppliers, and developing a reliable process for ramping to rate for parts that are new, undergoing drawing changes, or undergoing re-sourcing at a new supplier. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Manufacturing Engineer (2nd Shift) ResMed IncManufacturing Engineer (2nd Shift)Calabasas, CA$79,000–$119,000 / yearThe Manufacturing Engineer (Liquid Silicone Rubber Molding) is a critical role responsible for supporting production lines and manufacturing processes for Liquid Silicone Rubber (LSR) molding operations. We work hard to offer holistic benefits packages, provide flexible work arrangements, cultivate a workforce culture that allows employees to grow personally and professionally, and deliver competitive salaries to our team members.
Engineer, Manufacturing Mason Controls IncEngineer, ManufacturingSylmar, CA$101,000–$120,000 / yearMason, a wholly-owned subsidiary of Transdigm, offers world-class control devices and subsystems - such as control grips, throttles, HaWC controllers, and communications interfaces - for today's advanced cockpits, military vehicles, and other specialized applications. Performs a wide variety of mechanical, electromechanical, subsystems, and control engineering assignments at a high degree of complexity with minimal direction from Manufacturing Engineering Manager.
Lead RF Manufacturing Engineer Impulse Space Propulsion Inc.Lead RF Manufacturing EngineerRedondo Beach, CA$140,000–$180,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Experience with automated test environments using Python or similar tools, including ability to understand existing test automation, troubleshoot failures, and make targeted changes is strongly desired.
Manufacturing Technician (IGIV Filling) Grifols SAManufacturing Technician (IGIV Filling)Los Angeles, CA$21.50–$22 / hourResponsible for performing the following daily tasks: cleaning/ sanitizing aseptic and non-aseptic processing areas, preparing and sterilizing filling and freeze-drying components (such as vials, stoppers, and filling assemblies), and performing aseptic fills. Third Party Agency and Recruiter Notice: Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department.
Supplier Development Engineer, Manufacturing Starship Space Exploration Technologies CorpSupplier Development Engineer, Manufacturing StarshipHawthorne, CA$100,000–$117,500 / yearOwn the new product introduction of new parts and assemblies on the rocket, including determining the ideal manufacturing method, identifying and reviewing suppliers, and developing a reliable process for ramping to rate for parts that are new, undergoing drawing changes, or undergoing re-sourcing at a new supplier. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Specialist, Manufacturing Quality Engineer L3Harris Technologies IncSpecialist, Manufacturing Quality EngineerCanoga Park, CA$84,000–$156,000 / yearActively participates in the Material Review Board, including segregation and control of nonconforming hardware to preclude inadvertent processing, disposition nonconforming hardware, preparing for and conducting board meetings, and implementing disposition decisions. This individual will provide program Quality Engineering support for assigned contracted programs spanning the lifecycle of the program including design, development, production, test and supplier support.
Opto-Mechanical Manufacturing Engineer Impulse Space Propulsion Inc.Opto-Mechanical Manufacturing EngineerRedondo Beach, CA$100,000–$200,000 / yearThis position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Collaborate with optical design engineers to ensure manufacturability, DFM/DFA of optical assemblies, including custom spherical and aspherical lenses/mirrors.
Supplier Development Engineer, Manufacturing Falcon & Dragon Space Exploration Technologies CorpSupplier Development Engineer, Manufacturing Falcon & DragonHawthorne, CA$100,000–$117,500 / yearOwn the new product introduction of new parts and assemblies on the rocket, including determining the ideal manufacturing method, identifying and reviewing suppliers, and developing a reliable process for ramping to rate for parts that are new, undergoing drawing changes, or undergoing re-sourcing at a new supplier. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Supplier Support Manufacturing Engineer Gilat Satellite Networks LtdSupplier Support Manufacturing EngineerLos Angeles, CA$90,000–$105,000 / yearWe are looking for a Supplier Support Manufacturing Engineer, a strong technical contributor who can partner effectively with suppliers, ensuring they fully understand product requirements and engineering changes. They work closely with internal design and manufacturing teams, providing DFM guidance and assessing supplier capabilities to ensure alignment with production and product performance goals.
Propulsion Technician Raptor Manufacturing Systems Space Exploration Technologies CorpPropulsion Technician Raptor Manufacturing SystemsHawthorne, CA$23–$27 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
**SECRET CLEARANCE** Manufacturing Engineer Level 5 Apollo Professional Solutions Inc**SECRET CLEARANCE** Manufacturing Engineer Level 5Los Angeles, CAThis role plays a key part in optimizing manufacturing operations, driving continuous improvement initiatives, and ensuring high-performance outcomes across mechanical systems. Use engineering software tools (Creo CAD, Windchill PLM, Oracle MRP/MES, MS Office) to track: Design updates.
Manufacturing Technician - Albumin Filling (B315 Filling) Grifols SAManufacturing Technician - Albumin Filling (B315 Filling)Los Angeles, CA$21–$22 / hourResponsible for performing the following daily tasks: cleaning/ sanitizing aseptic and non-aseptic processing areas, preparing and sterilizing filling and freeze-drying components (such as vials, stoppers, and filling assemblies), and performing aseptic fills. Third Party Agency and Recruiter Notice: Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department.
Manufacturing Technician - (FRAC ) Grifols SAManufacturing Technician - (FRAC )Los Angeles, CA$21–$22 / hourResponsible for performing the following daily tasks: cleaning/ sanitizing aseptic and non-aseptic processing areas, preparing and sterilizing filling and freeze-drying components (such as vials, stoppers, and filling assemblies), and performing aseptic fills. Third Party Agency and Recruiter Notice: Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department.
Optical Engineer The Aerospace CorpOptical EngineerEl Segundo, CA$129,000–$193,500 / yearIt would be impressive if you have one or more of these: Background with optical communications and space hardware testing including development of testbeds, ground support test equipment, test programs and management of test program execution for lasercom, component, units, subsystems or systems. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers.
Propulsion Engineer, Avionics Manufacturing (Raptor) SpaceXPropulsion Engineer, Avionics Manufacturing (Raptor)Hawthorne, CA$100,000–$117,500 / yearAs propulsion engineer on the Raptor avionics manufacturing team, you will be working to development, qualification, automation various manufacturing and test processes as well as scale up our in-house production capability across a wide range of avionics hardware including PCBAs, sensors, harnessing, and more. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.