Manufacturing Facilities Manager Federal Signal OpeningsManufacturing Facilities ManagerSnohomish, WashingtonAs the Manufacturing Facilities Manager for OSW Equipment, you are responsible for, and supervises the maintenance, care, and efficient operation of all equipment and facilities used by the organization, in addition to driving cost reductions through preventive maintenance, equipment and process improvements in all aspects of the facility. Founded in 1901, Federal Signal is a leading global designer and manufacturer of products and total solutions that serve municipal, governmental, industrial, and commercial customers.
Software Engineer, Manufacturing Systems Engineering AmazonSoftware Engineer, Manufacturing Systems EngineeringBellevue, WAKey job responsibilities - Design and Implement System Architecture for Manufacturing Dev Test Lab - Partner with device software, frontend, networking, and security engineering teams to build scalable lab infrastructure - Scale production implementation to support global deployments to manufacturing and CM sites A day in the life This role is for a Software Development Engineer who will design and build launch support equipment and support LEO manufacturing operations. Description Amazon LEO is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
Software Engineer - MSE, Manufacturing Systems Engineering Amazon.com IncSoftware Engineer - MSE, Manufacturing Systems EngineeringBellevue, WAAmazon LEO is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Account Executive, Commercial, Manufacturing & Industrials AmazonAccount Executive, Commercial, Manufacturing & IndustrialsSeattle, WAKey job responsibilities - Provide strategic account engagement that helps customers implement solutions that solve industry-specific procurement challenges - Drive and accelerate spend adoption by advising customers on best practices for using Amazon Business solutions - Focus on automating service needs for customers, while working with Product and Technical teams to develop solutions that will increase solution adoption - Relay market needs and requirements back to internal Amazon teams, including Product, Technical, and Category Management teams - Deliver accurate weekly reporting on pipeline and customer spend adoption, including account status updates and insights learned during deployment About the team The Amazon Business Field team is dedicated to developing solutions inclusive of an expanded online store that combines the selection, convenience, and value customers have come to know and love from Amazon, with new features and unique benefits tailored to customers in the Field sector. Basic Qualifications - Bachelor's degree, or 3+ years of sales or marketing work (like e-commerce, retail technology, SaaS) or equivalent experience - Experience identifying, developing, negotiating, and closing opportunities across a wide spectrum of customer engagement levels - Experience positioning and selling technology to new customers and new market segments Preferred Qualifications - 4+ years of supply chain management within a procurement organization experience - Experience working in a customer-facing environment - Experience proactively growing customer relationships within an account while expanding their understanding of the customer's business - 5+ years of sales experience selling to Fortune 5000 senior leadership.
SAP Production Planning / Manufacturing, Amazon Leo AmazonSAP Production Planning / Manufacturing, Amazon LeoBellevue, WAKey job responsibilities - Build SAP PP based product features aligning with product vision - Ability to identify and implement best practices to optimize business processes using SAP and championing for utility/intuitiveness/simplicity of process/product - Participate in blueprint workshops, fit-gap analysis and produce detailed design documents reasoning from core needs, reasoning from core needs, challenging assumptions - Support creating training documentation for product users and lead train the trainer sessions for Product changes - Participate in strategic planning, roadmap discussions for SAP Manufacturing solutions including contributions to Amazon 1yr annual planning - Manage sprint planning, deployment for product feature enhancements bringing in business value, business impact and reasoning. - Defining critical metrics including - success metrics, product adoption, data driven insights into product improvement - Prepare product design, functional specifications, configure, test and support implementation for all SAP RICEFW areas - Build and support integration with cross-workstream processes - SAP EWM, QM, MM, SAP MES system - Support SAP Production system for ticket resolutions, business support needs, understanding product improvement opportunities About the team Amazon Leo Enterprise Applications team owns and manages mission critical enterprise systems (ERP) for satellite manufacturing.
Advanced Manufacturing & Design - Associate Faculty Pool SKAGIT VALLEY COLLEGE EDUCATION ASSOCIATIONAdvanced Manufacturing & Design - Associate Faculty PoolMount Vernon, WA$2,025–$2,026 / yearKnowledge, Skills, and Abilities Demonstrated expertise in manufacturing techniques or subjects relevant to the courses being taught; Strong communication and teaching skills; Ability to effectively engage with a diverse student population; Commitment to fostering an inclusive learning environment; Familiarity with safety protocols in a manufacturing environment; Foster a growth mindset, encouraging all students to learn through practice and effort; Employ inclusive, active learning strategies that respect diverse cultures and backgrounds; Uphold integrity, respect, collaboration, and open communication; Effectively teach and communicate with adult learners in Advanced Manufacturing and Design; Use diverse teaching methods to support learning for a varied student population; Promote equity, multicultural understanding, and appreciation for underrepresented groups; Collaborate effectively with colleagues, staff, students, and administrators from diverse backgrounds; Demonstrate strong leadership, sound decision-making, and appropriate delegation skills. About SVC Established in 1926, Skagit Valley College is a comprehensive community college within the Washington State Board for Community and Technical Colleges (SBCTC) providing associates and bachelor's degrees, as well as certificates, in high-quality academic transfer pathways, workforce training, basic education for adults, and lifelong learning opportunities.
SAP - Production Planning - PP - Discrete Manufacturing - Manager - Consulting - Location OPEN EYSAP - Production Planning - PP - Discrete Manufacturing - Manager - Consulting - Location OPENSeattle, WA$142,600–$261,500 / yearIf you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, select Option 2 for candidate related inquiries, then select Option 1 for candidate queries and finally select Option 2 for candidates with an inquiry which will route you to EY's Talent Shared Services Team (TSS) or email the TSS at ssc.customersupport@ey.com . Additionally, you will analyze newly implemented technology solutions to ensure they meet business requirements and collaborate with technical teams to design and deliver system architecture solutions.
SAP - Production Planning - Digital Manufacturing Cloud - Senior Manager-Consulting - Location OPEN EYSAP - Production Planning - Digital Manufacturing Cloud - Senior Manager-Consulting - Location OPENSeattle, WA$171,600–$392,100 / yearKnowledge of integration between SAP PP and: + FICO for product costing and order settlement + Extended Warehouse Management (EWM) for production supply and receiving + PPDS + Product Lifecycle Management (PLM) systems, including ownership of Bills of Material (BOM) + Master Data Management (MDM) tools/systems for manufacturing data + Materials Management, for both Inventory Management and Procurement functions + Digital Manufacturing Cloud, for both Discrete and Process Industries + Knowledge of manufacturing operations, preferably in complex industrial. If you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, select Option 2 for candidate related inquiries, then select Option 1 for candidate queries and finally select Option 2 for candidates with an inquiry which will route you to EY's Talent Shared Services Team (TSS) or email the TSS at ssc.customersupport@ey.com .
SAP - Production Planning - PP - Discrete Manufacturing - Senior - Consulting - Location OPEN EYSAP - Production Planning - PP - Discrete Manufacturing - Senior - Consulting - Location OPENSeattle, WA$102,500–$187,900 / yearIf you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, select Option 2 for candidate related inquiries, then select Option 1 for candidate queries and finally select Option 2 for candidates with an inquiry which will route you to EY's Talent Shared Services Team (TSS) or email the TSS at ssc.customersupport@ey.com . By leveraging EY's expertise in SAP, Supply Chain, FICO, BPC, Data & Analytics, Customer Solutions, Technology & Architecture, and SuccessFactors, we assist clients in enhancing performance and increasing productivity.
SAP - Production Planning - Digital Manufacturing Cloud - DMC - Manager - Consulting - Location OPE EYSAP - Production Planning - Digital Manufacturing Cloud - DMC - Manager - Consulting - Location OPESeattle, WA$142,600–$261,500 / yearIf you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, select Option 2 for candidate related inquiries, then select Option 1 for candidate queries and finally select Option 2 for candidates with an inquiry which will route you to EY's Talent Shared Services Team (TSS) or email the TSS at ssc.customersupport@ey.com . Additionally, you will analyze newly implemented technology solutions to ensure they meet business requirements and collaborate with technical teams to design and deliver system architecture solutions.
Marketing Manager, Automotive & Manufacturing, AWS Industry Marketing AmazonMarketing Manager, Automotive & Manufacturing, AWS Industry MarketingSeattle, WApresentations, whitepapers, infographics, webinars, customer success stories, product videos.) that land our Auto&Mfg value proposition - Engage with customers and partners to drive advocacy - Own execution for key communication channels including website, blog, social, on-network promotion, and emails - Plan and execute marketing initiatives at industry events to showcase messaging, content, keynotes, and breakout sessions - Collaborate with AWS field support teams to maintain internal sales hubs with the latest industry resources, value propositions, and sales enablement content - Partner with other marketing teams (e.g., web content, campaigns, demand generation, field teams, and events) to drive and execute on global marketing initiatives. Description Industry customers have unique needs and paths for cloud adoption, and the AWS Industry Marketing team helps drive product strategy, go-to-market motions, and marketing activities that help industry customers transform their businesses using the cloud, data, and AI.
Senior Director, Value Creation Strategy Stanley Black & Decker IncSenior Director, Value Creation StrategySeattle, WARemoteBuilding Diverse / Collaborative Teams - Fosters a "One Team, One Plan, One Set of P&L Results" mindset, building strong relationships across functions and geographies to deliver business targets Program / Project Management - Develop project plans, communicate scope, budgetary and/or resource changes and progress, and complete projects on time in budget. Key Competencies Strategic Change/Thought Leadership - Demonstrated ability to identify the problem the organisation is trying to fix, construct and articulate a new vision, prepare the organization for change, build and execute a roadmap taking the organization from the current state to the new vision whilst managing stakeholders through the change.
Regional Account Manager, MEP - Pacific Northwest Stanley Black and DeckerRegional Account Manager, MEP - Pacific NorthwestSeattle, WA$84,000–$135,200 / yearBeing part of our team means you'll get to:** **_Grow:_** **Be part of our global company with 20+ brands to grow and develop your skills along multiple career paths.** **_Learn:_** **Have access to a wealth of learning resources, including our digital learning portal.** **_Belong:_** **Experience an awesome place to work where we have mutual respect and a great appreciation for diversity, equity, and inclusion.** **_Give Back:_** **Help us continue to make positive changes locally and globally through volunteerism, giving back, and sustainable business practices.** \#LI-REMOTE \#LI-ZN1 **What's more, you'll get that pride that comes from empowering makers, doers, protectors, and everyday heroes all over the world. **Prepare and execute key product demonstrations for end-users and counter days.** **Coordinate promotions, COOP, and marketing support for account growth and sales.** **Educate key decision makers on rebate programs and track progress towards goals.** **Manage purchase orders and pricing, resolving issues with Customer Service and Channel Marketing.** **Track sales goals and progress using Power BI to analyze business data to identify growth opportunities.**
Technician Production I ELDEC AerospaceTechnician Production ILynnwood, WashingtonAbilities: Ability to learn new test software and equipment and to identify non-conforming conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time entry, data entry, on-line training PDM and MRP systems; Ability to think analytically and provide constructive feedback. Calibrate or otherwise adjust assigned units by such means as potentiometer adjustment, clocking or other positioning, shimming, tension or coil adjustments, bearing and gear adjustments, as appropriate for specific unit; Make required mathematical calculations for voltage, resistance, current, impedance, amplification, flow rate and mass, mechanical dimensions and adjustments.
Operations Engineer Starlink Space Exploration Technologies CorpOperations Engineer StarlinkRedmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As an Operations Engineer on the Starlink Satellite team, you will drive improvement projects for our Materials Management and Satellite Supply Chain organization to ensure that safety, reliability, and process capability goals are achieved, maintained, and improved.
Technician II Production - 2nd Shift Crane Pumps & Systems IncTechnician II Production - 2nd ShiftLynnwood, WA$28.24–$37.38 / hourhand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter, on-line training PDM and MRP systems. Located in the epicenter of United States aviation manufacturing, our Crane Aerospace & Electronics Lynnwood, Wash., facility delivers industry-leading aerospace & defense power, sensing and fluid solutions.
SAP Production Planning and QM, Amazon Leo AmazonSAP Production Planning and QM, Amazon LeoBellevue, WAEnsure that the deployed applications perform as per customer expectations and there are no performance issues - Identify training needs, support creating training documentation and lead train the trainer sessions - Participate in strategic planning, roadmap discussions for SAP Manufacturing solutions - Participate in quarter planning, sprint planning, deployment for continuous enhancements - Team player, ready to share and contribute to collective success of the team About the team Amazon Leo Enterprise Applications team owns and manages mission critical enterprise systems (ERP) for satellite manufacturing. Key job responsibilities - Build SAP PP, QM based solutions - Conduct Blueprint workshops, fit-gap analysis and produce detailed design documents - Prepare functional specifications, configure, test and lead implementation for all SAP RICEFW areas - Build and support integration with SAP EWM, PM, MM, SAP MES system - Open to learn and scale up to support solution designs for all modules for SAP Manufacturing process and integrated systems - Support SAP Production system for ticket resolutions, business support needs.
Production Technician I (Mon-Thur) Contract-to-Hire Crane Aerospace & ElectronicsProduction Technician I (Mon-Thur) Contract-to-HireLynnwood, WAPreferred Qualifications:** + Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods + AA degree in Electronic or Mechanical Technology, or equivalent knowledge through experience or other recognized educational institution **Working Conditions:** + Working conditions are normal for a manufacturing environment + Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE + May be exposed to unusual environmental conditions such as loud noises, cold temperatures, + confined spaces, dust or fumes + May require occasional travel to support customer + Standing: 20% *percentage is approximate and may vary depending on work task + Sitting: 80% *percentage is approximate and may vary depending on work task + Lifting (in pounds): up to 35 pounds + Pushing (in pounds): up to 100 pounds + Mental/Visual: use of microscope and computer + Workspace: clean bench _Crane Co. reserves the right to change or assign other duties to this position. Located in the epicenter of United States aviation manufacturing, our Crane Aerospace & Electronics Lynnwood, Wash., facility delivers industry-leading aerospace & defense power and fluid solutions.
Production Technician I (Mon-Thur) ELDEC AerospaceProduction Technician I (Mon-Thur)Lynnwood, Washington$24.64–$32.47 / hourAbilities: Ability to learn new test software and equipment and to identify non-conforming conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time entry, data entry, on-line training PDM and MRP systems; Ability to think analytically and provide constructive feedback. Calibrate or otherwise adjust assigned units by such means as potentiometer adjustment, clocking or other positioning, shimming, tension or coil adjustments, bearing and gear adjustments, as appropriate for specific unit; Make required mathematical calculations for voltage, resistance, current, impedance, amplification, flow rate and mass, mechanical dimensions and adjustments.
Production Technician I (Mon-Thur) Crane Pumps & Systems IncProduction Technician I (Mon-Thur)Lynnwood, WA$24.64–$32.47 / hourAbilities: Ability to learn new test software and equipment and to identify non-conforming conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time entry, data entry, on-line training PDM and MRP systems; Ability to think analytically and provide constructive feedback. Calibrate or otherwise adjust assigned units by such means as potentiometer adjustment, clocking or other positioning, shimming, tension or coil adjustments, bearing and gear adjustments, as appropriate for specific unit; Make required mathematical calculations for voltage, resistance, current, impedance, amplification, flow rate and mass, mechanical dimensions and adjustments.
Supply Warehouse Material Coordinator UIC Government Services and the Bowhead Family of CompaniesSupply Warehouse Material CoordinatorBremerton, WATrack, expedite, and coordinate the flow of materials between base maintenance shops, remote security sectors, external commercial vendors, and localized warehousing divisions + Review, validate, and clear material requisitions submitted by military and civilian personnel, matching operational requests with proper funding, priority designators, and project codes. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
Technician Production I Crane Aerospace & ElectronicsTechnician Production ILynnwood, WAPreferred Qualifications: + Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods + AA degree in Electronic or Mechanical Technology, or equivalent knowledge through experience or other recognized educational institution Working Conditions: + Working conditions are normal for a manufacturing environment + Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE + May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes + May require occasional travel to support customer + Standing: 20% *percentage is approximate and may vary depending on work task + Sitting: 80% *percentage is approximate and may vary depending on work task + Lifting (in pounds): Up to 35 pounds + Pushing (in pounds): Up to 100 pounds + Mental/Visual: Use of Computer and Microscope + Workspace: Clean Bench / Manufacturing Environment As a team member at Crane Aerospace and Electronics, you'll enjoy: + **Benefits:** Health care, dental, vision, life and disability insurance starting the first day of the month + **Time Off:** 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year. Beyond an associate's base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement - as well as performance-based bonus programs for certain positions.
Production Line Welder I Federal Signal OpeningsProduction Line Welder ISnohomish, WashingtonAs a Welder on our growing Production Line, you are contributing to the success of the company by safely and efficiently welding, cutting, and brazing metal pieces and products using flame-cutting and hand welding equipment on dump trucks, trailers, and parts. Must be able to traverse facilities and machinery by bending or twisting, kneeling, crouching, stooping, crawling, climbing, climbing on ladders, balancing, lifting, walking, carrying materials and standing for long periods of time.
Production Line Welder II Federal Signal OpeningsProduction Line Welder IISnohomish, WashingtonAs a Welder II on our growing Production Line, you are contributing to the success of the company by safely and efficiently welding, cutting, and brazing metal pieces and products using flame-cutting and hand welding equipment on dump trucks, trailers, and parts. Must be able to traverse facilities and machinery by bending or twisting, kneeling, crouching, stooping, crawling, climbing, climbing on ladders, balancing, lifting, walking, carrying materials and standing for long periods of time.
Electronics Technician III Crane Aerospace & ElectronicsElectronics Technician IIILynnwood, WA$41.93–$53.69 / hourThe Technician III Electronics works under limited direction/supervision and is responsible to test, troubleshoot, repair, and modify production of electronic or mechanical products, parts, equipment and systems, such as computer equipment, instrumentation, digital / analog, electronic products, test equipment, electro-mechanical products, applying principles and theories of electronics, electrical circuitry, and electronic testing. Abilities: Ability to learn new test software and equipment and to identify abnormal conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter, on-line training PDM and MRP systems.
Electronics Technician Crane Aerospace & ElectronicsElectronics TechnicianLynnwood, WA$32.32–$41.77 / hourThe Electronics Technician works under limited direction/supervision and is responsible to test, troubleshoot, repair, and modify production of electronic or mechanical products, parts, equipment and systems, such as computer equipment, instrumentation, digital / analog, electronic products, test equipment, electro-mechanical products, applying principles and theories of electronics, electrical circuitry, and electronic testing. + Abilities: Ability to learn new test software and equipment and to identify abnormal conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter, on-line training PDM and MRP systems.
Electronics Technician lll Crane Aerospace & ElectronicsElectronics Technician lllLynnwood, WA$41.93–$53.69 / hourThe Electronics Technician works under limited direction/supervision and is responsible to test, troubleshoot, repair, and modify production of electronic or mechanical products, parts, equipment and systems, such as computer equipment, instrumentation, digital / analog, electronic products, test equipment, electro-mechanical products, applying principles and theories of electronics, electrical circuitry, and electronic testing. + Abilities: Ability to learn new test software and equipment and to identify abnormal conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter, on-line training PDM and MRP systems.
Electronics Technician III ELDEC AerospaceElectronics Technician IIILynnwood, WashingtonThe Electronics Technician works under limited direction/supervision and is responsible to test, troubleshoot, repair, and modify production of electronic or mechanical products, parts, equipment and systems, such as computer equipment, instrumentation, digital / analog, electronic products, test equipment, electro-mechanical products, applying principles and theories of electronics, electrical circuitry, and electronic testing. Abilities: Ability to learn new test software and equipment and to identify abnormal conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter, on-line training PDM and MRP systems.
Electronics Technician III Crane Pumps & Systems IncElectronics Technician IIILynnwood, WAJob Summary: The Technician III Electronics works under limited direction/supervision and is responsible to test, troubleshoot, repair, and modify production of electronic or mechanical products, parts, equipment and systems, such as computer equipment, instrumentation, digital / analog, electronic products, test equipment, electro-mechanical products, applying principles and theories of electronics, electrical circuitry, and electronic testing. Abilities: Ability to learn new test software and equipment and to identify abnormal conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter, on-line training PDM and MRP systems.
Industrial Engineer UIC Government Services and the Bowhead Family of CompaniesIndustrial EngineerBremerton, WA$110,000–$140,000 / yearThe following skills are Highly Desired: + PE Certification a plus + Modeling and Simulation experience a plus + Operations Research a plus + Shipyard experience preferred including Machine Shop, or Factory Production experience + This position will require high percentage of travel to other shipyards Target salary is $110,000/year to $140,000/year, commensurate with experience SECURITY CLEARANCE REQUIREMENTS: Must currently hold a security clearance at the Secret level. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
Electronics Technician II Crane Aerospace & ElectronicsElectronics Technician IILynnwood, WA$22.26–$27.45 / hourAbilities: Ability to learn new test software and equipment and to identify abnormal conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter, on-line training PDM and MRP. + Calibrate or otherwise adjust assigned units by such means as component selection, potentiometer adjustment, clocking or other positioning, shimming, tension or coil adjustments, bearing and gear adjustments, as appropriate for specific unit; Make required mathematical calculations for voltage, resistance, current, impedance, amplification, flow rate and mass, mechanical dimensions and adjustments.
Production Line Welder I Federal SignalProduction Line Welder ISnohomish, WA$22–$26 / hourAs a Welder on our growing Production Line, you are contributing to the success of the company by safely and efficiently welding, cutting, and brazing metal pieces and products using flame-cutting and hand welding equipment on dump trucks, trailers, and parts. Aluminum experienced encouraged + 1-2 years of Fabrication with Welding & Layout experience + 1-2 years of Mechanical experience with Hydraulics (preferred) Physical Requirements: + Must be able to weld components that are vertical, flat, or overhead.
Production Line Welder II Federal SignalProduction Line Welder IISnohomish, WA$22–$30 / hourHigh School Graduate (preferred) + 1 - 4 years of Experience with wire feed welding Steel & Aluminum experience + 1-3 years of Fabrication with Welding & Layout experience + 1-3 years of Mechanical experience with Hydraulics (preferred) Physical Requirements: + Must be able to weld components that are vertical, flat, or overhead. As a Welder II on our growing Production Line, you are contributing to the success of the company by safely and efficiently welding, cutting, and brazing metal pieces and products using flame-cutting and hand welding equipment on dump trucks, trailers, and parts.
Electronics Technician II Crane Pumps & Systems IncElectronics Technician IILynnwood, WA$22.26–$27.45 / hourJob Summary: The Technician II Electronics works under close direction/supervision and is responsible to test, troubleshoot, repair, and modify production of electronic or mechanical products, parts, equipment and systems, such as computer equipment, instrumentation, digital / analog, electronic products, test equipment, electro-mechanical products, applying principles and theories of electronics, electrical circuitry, and electronic testing. Abilities: Ability to learn new test software and equipment and to identify abnormal conditions in equipment and product; Manual and finger dexterity (ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects); Ability to make precisely coordinated movements; Ability to work in multiple software systems, including time enter, data enter, on-line training PDM and MRP systems.
Program Manager 2 Creation Technologies LLCProgram Manager 2Everett, WAIdentify cost-saving opportunities while maintaining quality, recovering costs for changes Engineering Change Orders (ECO), Non-recurring Expenditures (NREs, excess, obsoletes) and ensuring Return on Investment. Possess strong technical knowledge of electronics design, Printed Circuit Board (PCB) assembly, Surface Mount Technology (SMT), manufacturing processes, and quality control methods.
Senior Machine Learning Infrastructure Engineer Unity TechnologiesSenior Machine Learning Infrastructure EngineerBellevue, WA$183,700–$248,600 / yearWhile specific benefits vary, here are some of the ways we strive to take care of our eligible team members globally: Comprehensive health, life, and disability insurance | Commute subsidy | Employee stock ownership | Competitive retirement/pension plans | Generous vacation and personal days | Support for new parents through leave and family-care programs | Office food snacks | Mental Health and Wellbeing programs and support | Employee Resource Groups | Global Employee Assistance Program | Training and development programs | Volunteering and donation matching program **Life at Unity** Unity [NYSE: U] is the world's leading game engine, powering play for more than 3 billion consumers each month. **Bellevue, WA, USA** **Senior Machine Learning Infrastructure Engineer** Location Bellevue, WA, USA Department AI & Machine Learning Requisition ID JOBREQ-2616023 **Role description** **The opportunity** Unity is looking for a Senior Machine Learning Infrastructure Engineer to join our Vector Ads team, where we build the real-time systems that power Unity's global advertising platform.