CD-DM Specialist III Calibre SystemsCD-DM Specialist IIIHuntsville, ALCross-train with the Configuration Management (CM) Analyst to learn the Engineering Change Proposal/Project, Study, and Tasks (ECP/PST) processes; become adept at both positions for backup purposes. Pay Rate: $31.50 per hour H&W: $4.93 per hour Essential Functions - Perform technical writing for instrumentation at the Ronald Reagan Test Site (RTS).
NewRobotic Welding Engineering Specialist Vaco LLCRobotic Welding Engineering SpecialistMadison, AL$70,000–$80,000 / yearDetermining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual’s skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. With that said, as required by local law, Vaco by Highspring believes that the following salary range referenced above reasonably estimates the base compensation for an individual hired into this position in geographies that require salary range disclosure.
Territory Underwriting Specialist Sentry InsuranceTerritory Underwriting SpecialistMobile, ALThis role markets Commercial Lines products, builds agency partnerships, leads underwriting for new/complex business, manages growth and profitability, and maintains market visibility. Minimum of 5 years related work experience, with multi-line middle market underwriting experience handling accounts in construction, manufacturing, wholesale, real estate, and service industries preferred.
Mid-Level Production Control Manufacturing Production Specialist BoeingMid-Level Production Control Manufacturing Production SpecialistHuntsville, AlabamaThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. · Serve as work center focal for line monitoring of sub-assembly area (e.g., PA-subs, PA, Gimbal, DIFP, ADPR and Seeker Assembly & Test) production plans and actual to ensure optimal line balancing, WIP control, and elimination of over production.
Senior Production Control Manufacturing Production Specialist BoeingSenior Production Control Manufacturing Production SpecialistHuntsville, AlabamaThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. · Serve as work center focal for line monitoring of sub-assembly area (e.g., PA-subs, PA, Gimbal, DIFP, ADPR and Seeker Assembly & Test) production plans and actual to ensure optimal line balancing, WIP control, and elimination of over production.
Associate Production Control Manufacturing Production Specialist BoeingAssociate Production Control Manufacturing Production SpecialistHuntsville, AlabamaThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. · Monitor each line or sub-assembly area (e.g., PA-subs, PA, Gimbal, DIFP, ADPR and Seeker Assembly & Test) production plans and actual to ensure optimal line balancing, WIP control, and elimination of over production.
NewProduction Specialist REHAU ÖsterreichProduction SpecialistCullman, AlabamaSupport additional production areas (Sleeve Room, Direct Dosing, Mixing Room, Teflonizing, PIP, Automation Packaging, and Raumat Automation) by troubleshooting issues or running equipment when needed. This position requires advanced technical knowledge, troubleshooting ability, and process expertise to support daily operations, train team members, and assist with shift coordination.
Production Specialist MACRO IndustriesProduction SpecialistHuntsville, ALFull timeThe successful candidate will assist in daily production activities and cut, shape and prepare high precision tile materials ensuring desired quality of work is safely achieved. Our profits do not go to the stock market or a private equity group—they come back to our employee-owners in the form of increased share value that you can cash in on in retirement.
NewProduction Specialist REHAU IncorporatedProduction SpecialistCullman, ALSupport additional production areas (Sleeve Room, Direct Dosing, Mixing Room, Teflonizing, PIP, Automation Packaging, and Raumat Automation) by troubleshooting issues or running equipment when needed. This position requires advanced technical knowledge, troubleshooting ability, and process expertise to support daily operations, train team members, and assist with shift coordination.
NewProduction Specialist REHAU Construction LLCProduction SpecialistCullman, ALPart timeSupport additional production areas (Sleeve Room, Direct Dosing, Mixing Room, Teflonizing, PIP, Automation Packaging, and Raumat Automation) by troubleshooting issues or running equipment when needed. This position requires advanced technical knowledge, troubleshooting ability, and process expertise to support daily operations, train team members, and assist with shift coordination.
Graphic Designer/Production Specialist FASTSIGNS #251101Graphic Designer/Production SpecialistDecatur, ALA Successful FASTSIGNS Graphic Designer Will: Create computer-generated full-color graphics and/or vinyl output that can be printed and mounted to a substrate or weeded, cut and applied. Determine size and arrangement of illustrative material and copy, select style and size of type, and arrange layout based upon available space, aesthetic design, and production requirements.
Senior Title Production Support Specialist Stewart Title Guaranty CompanySenior Title Production Support SpecialistAL$45,000–$70,000 / yearResponsible for supporting real estate transactions by providing a range of administrative and/or support duties to assist title processes as part of a production center, branch office, or member of a title team. The base salary range is not an absolute, but a guide, and actual offers will be based on the individual candidate's knowledge, skills, education, experience, location, market conditions, and other compensation components.
Title Production Support Specialist II Stewart Title Guaranty CompanyTitle Production Support Specialist IIAL$37,651.82–$62,753.03 / yearResponsible for reviewing the quality of the completed product ensuring information captured is error-free and accurate for transactions ranging from single site to high-liability multi-site commercial real estate transactions. The base salary range is not an absolute, but a guide, and actual offers will be based on the individual candidate's knowledge, skills, education, experience, location, market conditions, and other compensation components.
Production Control Specialist III Blue Origin Enterprises LPProduction Control Specialist IIIHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Production Control Specialist III Blue OriginProduction Control Specialist IIIHuntsville, Alabamaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Production Control Senior Specialist Honda Motor Co LtdProduction Control Senior SpecialistALThe NAPC Production Planner B is responsible for scheduling and planning production related to FRM, PT, Service or In-house lines in order to meet the overall company Seihan Strategy. Production Planner B will be responsible to train new Production Planner A members and support key questions from Production Planner A to provide direction.
NewSr. Production Control Specialist, Test Ops Maintenance Blue Origin Enterprises LPSr. Production Control Specialist, Test Ops MaintenanceHuntsville, AL$115,256–$161,357.70 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewSr. Production Control Specialist, Test Ops Maintenance Blue OriginSr. Production Control Specialist, Test Ops MaintenanceHuntsville, Alabamaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewProduction Support Specialist Bunge Global SAProduction Support SpecialistDecatur, ALPrimary responsibilities include assisting with inventory management, reporting processing yields and shrinks, reporting of key performance indicators (KPIs), providing accounting inputs for month end accounting closes, Daily Wires, Monthly Productivity Scorecard, and supporting other local plant administrative processes., As a premier agribusiness solutions provider, our team of ~34,000 dedicated employees partner with farmers across the globe to move agricultural commodities from where they're grown to where they're needed-in faster, smarter, and more efficient ways.
Specialist - Production Control Blue Origin Enterprises LPSpecialist - Production ControlHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. As an early hire, this machinist will go beyond running parts - they will provide direct machinability feedback to the design engineering team, influence tolerancing and feature geometry before designs freeze, and play a key role in evaluating and selecting the CNC machines that will form the long-term production equipment plan.
Specialist, Pre-Production Management Mazda Toyota ManufacturingSpecialist, Pre-Production ManagementHuntsville, AlabamaOur innovative, inclusive environment allows every single one of our team members the chance to learn from others and do something that matters – from building vehicles that lead in quality & value to making a true difference in Mazda Toyota Manufacturing and our hometown North Alabama community. Support the Production Control department’s objective to ensure successful new model launch and change point management by strategic planning, leading multiple projects, collaborating with stakeholders, and maintaining system accuracy.
Specialist II, Production Planning (Master Schedule) Nordson CorpSpecialist II, Production Planning (Master Schedule)ALKEY RESPONSIBILITIES: Master Production Planning: Develop and maintain a rolling 12-month Master Production Plan (MPP) aligned with demand forecasts, capacity constraints, and business priorities. Nordson Medical, a global leader in Interventional Solutions, Fluid Components, and Surgical Solutions, is seeking an experienced and highly motivated individual to join our team.
Director Production Control Blue Origin Enterprises LPDirector Production ControlAL$203,165–$284,430.30 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Director Production Control Blue OriginDirector Production ControlHuntsville, Floridaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Senior Manager of Production Management Cesna RecruitmentSenior Manager of Production ManagementCusseta, AL$95,0002. Over 10 years of production management experience in automobile, manufacturing industry, or an equivalent combination of education and experience. Senior Managers are responsible and authorized to supervise all production department employees in case of emergency or contingency.
Production Controls Sr - A Shift Blue OriginProduction Controls Sr - A ShiftHuntsville, Alabamaand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Production Controls Sr - A Shift Blue Origin Enterprises LPProduction Controls Sr - A ShiftHuntsville, ALand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewSpecialist, Manufacturing Engineer L3Harris Technologies IncSpecialist, Manufacturing EngineerHuntsville, ALThe successful candidate will work closely with cross-functional teams including design engineering, quality, supply chain, and operations to transition products from development into production, support rate increases, and drive continuous improvement initiatives across the factory floor. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Production Mechanic Palfinger AGProduction MechanicBirmingham, ALAs a leading technology and mechanical engineering company, we transform customer needs into seamlessly integrated solutions while providing opportunities for our people to grow, collaborate, and push beyond limits. Install/general assembly of various accessories, wiring, and components on truck bodies including toolboxes, lights, vices, and cranes.
NewSenior Specialist, Manufacturing Engineer- Composites L3Harris Technologies IncSenior Specialist, Manufacturing Engineer- CompositesHuntsville, ALJob Description: We are seeking a Senior Specialist, Manufacturing Engineer to work at our new state-of-the-art Advanced Manufacturing Facility (AMF-South) in Huntsville, AL, which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. Essential Functions: Manages large, complex, and high‑visibility manufacturing projects with minimal oversight, often involving cross‑functional teams and tight customer or program constraints.
Production Technician Toray Composite Materials America, IncProduction TechnicianDecatur, ALExhibits objectivity and openness to others views; gives and welcomes feedback; contributes to building a positive team spirit; puts success of team above own interests; able to build morale and group commitments to goals and objectives; Supports everyones efforts to succeed. The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl.
Senior Specialist, Manufacturing Engineer L3Harris Technologies IncSenior Specialist, Manufacturing EngineerHuntsville, ALSpecialist, Composites Manufacturing Engineer to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL, which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Specialist, Manufacturing Engineer- Composites L3Harris Technologies IncSpecialist, Manufacturing Engineer- CompositesHuntsville, ALJob Description: We are seeking a Specialist, Composites Manufacturing Engineer, to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL, which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Senior Specialist, Manufacturing Engineer (Compression Molding) L3Harris Technologies IncSenior Specialist, Manufacturing Engineer (Compression Molding)Huntsville, ALSpecialist, Manufacturing Engineer (Compression Molding) to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL, which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. Essential Functions: Provide expert-level knowledge in compression molding operations using a variety of materials (rubber, pre-preg carbon cloth, chopped fiber broadgoods, etc.).
NewSenior Specialist, Manufacturing Engineer (Compression Molding) L3 HarrisSenior Specialist, Manufacturing Engineer (Compression Molding)Huntsville, ALSpecialist, Manufacturing Engineer (Compression Molding) to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL , which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. Specialist, Manufacturing Engineer (Compression Molding) is a subject matter expert with comprehensive knowledge of job area and in-depth knowledge of project management.
NewSpecialist, Manufacturing Engineer- Composites L3 HarrisSpecialist, Manufacturing Engineer- CompositesHuntsville, ALWe are seeking a Specialist, Composites Manufacturing Engineer, to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL , which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
NewSenior Specialist, Manufacturing Engineer (Compression Molding) Harris Geospatial SolutionsSenior Specialist, Manufacturing Engineer (Compression Molding)Huntsville, ALEssential FunctionsProvide expert-level knowledge in compression molding operations using a variety of materials (rubber, pre-preg carbon cloth, chopped fiber broadgoods, etc.)Lead equipment requirements specification writing and equipment qualification effortsLead investigations into nonconforming hardware and implement corrective actions to prevent future occurrences. Specialist, Manufacturing Engineer (Compression Molding)Job Code36844Job LocationHuntsville, AL - AMF SouthJob Schedule9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday offJob DescriptionThe Aerojet Rocketdyne Segment of L3Harris is seeking an expert-level Sr.
Manufacturing Engineering Specialist Adtran Holdings IncManufacturing Engineering SpecialistHuntsville, ALThe ideal candidate will bring 3-5 years of experience in electronics manufacturing and possess hands-on knowledge of press-fit technology, fixture/tooling development, BOM management, and assembly documentation. We are seeking a Manufacturing Engineering Specialist to support and optimize back-end electronics manufacturing processes, including press-fit operations, mechanical PCB assembly, and full box build integration.
NewManufacturing Accountant - Cost Specialist IPG PhotonicsManufacturing Accountant - Cost SpecialistHuntsville, ALPosition OverviewThe Manufacturing Accountant – Cost Specialist will play a pivotal role in supporting both business groups and corporate functions. As a key member of the accounting team, the role delivers vital accounting and financial insights that inform critical business unit decisions.
NewSpecialist, Manufacturing Engineer- Composites Harris Geospatial SolutionsSpecialist, Manufacturing Engineer- CompositesHuntsville, ALJob Title: Specialist, Composites Manufacturing EngineerJob Code: 38202Job Location: Huntsville, AL- AMF SouthJob Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday offJob Description:We are seeking a Specialist, Composites Manufacturing Engineer, to work at our new state-of-the-art Advanced Manufacturing Facility (AMF) in Huntsville, AL, which will be our inert manufacturing facility for fabrication and assembly of composite rocket motor hardware. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Specialist II - Lean Manufacturing Carpenter Technology CorpSpecialist II - Lean ManufacturingALBA/BS degree in Engineering, Project Management or related field preferred, plus 3+ years of successful lean implementation experience with proven record of sustainable results OR · High School Diploma required, plus 5+ years of relevant lean implementation experience required. Carpenter Technology Corporation is a leading producer and distributor of premium specialty alloys, including titanium alloys, nickel and cobalt based superalloys, stainless steels, alloy steels and tool steels.
Teacher - Technical Ed./TV Production - THS - Apply 6/15/2026 - 9/11/2026 Alabaster City SchoolsTeacher - Technical Ed./TV Production - THS - Apply 6/15/2026 - 9/11/2026Thompson High School, ALTo follow the courses of study approved by the State Board of Education and curriculum guides and textbooks approved and adopted by the Alabaster City Schools Board of Education. JOB GOAL: To lead students toward their potential for intellectual, emotional, psychological, and physical growth and maturation through provision of appropriate guidance and learning experiences.
NewEstimator - Take-off Specialist Staff PermEstimator - Take-off SpecialistTallassee, ALStaff Perm is an Award Winning and Certified Small Business Enterprise utilizing a staff with over 20 years of staffing and placement experience to simplify the employee recruitment process. Estimating & Quoting: Calculate material requirements (sheet metal gauge, insulation, etc.) and labor to provide competitive, accurate customer quotes.
NewTest Engineering Specialist-weekend shift Koitecc SolutionsTest Engineering Specialist-weekend shiftHuntsville, ALTechnical knowledge and skills in troubleshooting down to the electronic component level of simple to medium complexity electronic and electro‑mechanical assemblies, utilizing test equipment such as multimeters, power supplies, signal generators, frequency counters, oscilloscopes, etc. Current or prior certification to IPC/WHMA‑A‑620, IPC‑A‑610, J‑STD‑001, & IPC 7711/7721.Candidate must be a U.S. Citizen and be able to possess and maintain a Final Secret Clearance or meet the eligibility to obtain and maintain a Secret Clearance.
Specialist, Program Manager - Manufacturing Design L3Harris Technologies IncSpecialist, Program Manager - Manufacturing DesignHuntsville, ALJob Description: The Missile Solutions Segment of L3Harris is currently seeking a Specialist, Program Manager - Manufacturing Design to lead Integrated Product Teams (IPTs) to design manufacturing processes and facility infrastructure as part of a large capacity expansion effort. To help spot these scams, remember that during our formal recruitment process, L3Harris will NOT (1) ask you for money; (2) offer to send you a check before doing any work; (3) require you to provide sensitive personal information early in the process or sensitive information about your previous employer; (4) send you emails from free commercial services (e.g.
Control System Specialist II S J Electro Systems LLCControl System Specialist IIHoover, ALPart timeYou will work in all areas of project implementation including project management, panel design, hardware selection, vendor/end user/consultant interaction, programming, testing, and site support. Our Revere brand is a leading provider of automation and control solutions for the industrial, water and wastewater treatment, power and energy, manufacturing, food and beverage, oil and gas, and pulp and paper industries.
SMTA Process Engineer Specialist-2nd shift LeidosSMTA Process Engineer Specialist-2nd shiftHuntsville, AlabamaLeidos Defense Systems Sector / Manufacturing provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support.
Manufacturing Specialist - 3rd Shift (Fri - Sun; 5AM-5:30PM) - P Siemens Energy AGManufacturing Specialist - 3rd Shift (Fri - Sun; 5AM-5:30PM) - PFort Payne, ALWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.
Manufacturing Specialist - 4th Shift (Fri -Sun 5PM-5:30AM) - P Siemens Energy AGManufacturing Specialist - 4th Shift (Fri -Sun 5PM-5:30AM) - PFort Payne, ALWith ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.
ERP Configuration Specialist - Supply Chain Neptune Technology Group IncERP Configuration Specialist - Supply ChainTallassee, ALThis role does not carry direct reports but operates cross-functionally with supply chain, manufacturing, finance, and IT teams, and collaborates with external implementation partners during the SAP S/4HANA transition. Configure and maintain SAP S/4HANA supply chain modules including Materials Management (MM), Inventory Management (IM), Warehouse Management (WM/EWM), Procurement, Production Planning (PP/MRP), and Quality Management (QM).