Launch Engineer - Fluid Systems IV Firefly Aerospace IncLaunch Engineer - Fluid Systems IVTXDesign, commission, and operate mission-critical fluid systems across a growing portfolio of launch sites, from historical US-based pads to greenfield builds in extreme locations including Wallops Flight Facility and Esrange, Sweden. Design, build, and activate new fluid systems across a global launch portfolio including Vandenberg Space Force Base (CA), Wallops Flight Facility (VA), Cape Canaveral Space Force Station (FL), and Esrange Space Center (Sweden).
System Configuration Engineer II Firefly Aerospace IncSystem Configuration Engineer IICedar Park, TXExceptional comprehension of first principles in the following engineering disciplines; mechanical, structural dynamics, materials, electrical, mechatronics, thermodynamics, fluid dynamics, orbital mechanics, controls, and propulsion. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Spacecraft Systems Engineer II Firefly Aerospace IncSpacecraft Systems Engineer IICedar Park, TXThe Systems Engineering team is accountable for requirements, interfaces, and test planning - it will be your responsibility to validate the system architecture, manage technical budgets and design configuration between departments, develop test plans, ensure verification of requirements, and support mission operations. We welcome you to join Firefly as a Spacecraft Systems Engineer, to leverage your creative and technical expertise for the development of Blue Ghost and Elytra spacecraft over the product lifecycle from concept through fabrication, test & flight.
NASA Commercial Spacecraft Flight Software Systems Engineer CACINASA Commercial Spacecraft Flight Software Systems EngineerHouston, TexasCACI is looking for an experienced Space Vehicle Flight Software Systems Engineer to work with NASA on its Commercial Spacecraft including Commercial Crew Vehicles for transporting astronauts to and from the International Space Station (ISS), Human Landing System Vehicle for transporting astronauts to and from the lunar surface, and U.S. Deorbit Vehicle to safety deorbit the ISS when retired. This exciting software systems engineering position involves insight/oversight of human-rated flight software including evaluations of concepts, analysis of flight software requirements and design, assessments of software architecture and code, and evaluations of verification tests and certification.
Spacecraft Systems Engineer III Firefly Aerospace IncSpacecraft Systems Engineer IIICedar Park, TXThe Systems Engineering team is accountable for requirements, interfaces, and test planning - it will be your responsibility to validate the system architecture, manage technical budgets and design configuration between departments, develop test plans, ensure verification of requirements, and support mission operations. We welcome you to join Firefly as a Spacecraft Systems Engineer, to leverage your creative and technical expertise for the development of Blue Ghost and Elytra spacecraft over the product lifecycle from concept through fabrication, test & flight.
Electrical Engineer- Spacecraft Avionics II / III Firefly Aerospace IncElectrical Engineer- Spacecraft Avionics II / IIICedar Park, TXYou also help developed and design the HIL system in order to verify functionality before spacecraft integration, interfacing with software, mechanical, propulsion, fluids, and structures teams to ensure the proper functionality of the integrated solution. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Software Engineer CbSoftware EngineerHouston, TexasDesign, develop, test, integrate, and deploy software solutions such as propulsion, command & data handling (C&DH), environmental control and life support systems (ECLSS), guidance navigation and control (GN&C), caution and warning (C&W), networks, datalinks, power, and other flight systems. Bachelor of Science in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, Computer Engineering, Computer Science, Computer Information Systems, or another related technical discipline.
Spacecraft Thermal Engineer III Firefly AerospaceSpacecraft Thermal Engineer IIICedar Park, TXThis role requires deep expertise in spacecraft thermal engineering, strong technical judgment, and the ability to independently lead multidisciplinary efforts involving analysis, testing, and vehicle design. They develop analytical approaches for complex thermal challenges, establish modeling strategies, mentor engineers across the organization, and influence major program decisions throughout vehicle development.
Manufacturing Engineer II (2nd Shift) RTX CorpManufacturing Engineer II (2nd Shift)McKinney, TXThe Advanced Products and Solutions division of Raytheon is seeking an Engineer to work in a manufacturing engineering team supporting Electro-Optical/Infrared(EO/IR) products in a factory production environment on second shift. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Senior Mechanical Engineer CesiumAstroSenior Mechanical EngineerAustin, TXThe ideal candidate will be versatile and proficient in mechanical analysis, electronics packaging, computer-aided design (CAD), mechanical interfaces, thermal architecture, spacecraft propulsion, deployable and actuated structures, and environmental qualification of spacecraft antennas and payloads. Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State.
Power Electronics Engineer, R&D Fluidstack LtdPower Electronics Engineer, R&DAustin, TXWe are taking compressor and chiller design in house, working on machine architectures nobody sells today, and going from blank sheet to production faster than this industry thinks is possible. Specify and integrate the drive for a high-speed hermetic motor, including the switching, thermal, bearing-current and insulation questions that follow from running a machine fast.
Wire Harness Electrical Engineer II Firefly Aerospace IncWire Harness Electrical Engineer IICedar Park, TXOur small- to medium-lift launch vehicles, lunar landers, and orbital vehicles allow us to service the entire lifecycle of government and commercial missions from low Earth orbit to the Moon and beyond. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
GNC Engineer - Embedded Controls, AI Satellites Starmind Space Exploration Technologies CorpGNC Engineer - Embedded Controls, AI Satellites StarmindBastrop, TXAs an Embedded Controls Engineer on the Starmind Guidance, Navigation, and Control team (GNC) team, you will apply a strong expertise in dynamics and closed loop controls to achieve robust and precise pointing on satellites, payloads, propulsion systems, and mechanisms. The Starmind team is developing key technologies to power this satellite - massive solar power generation systems, active cooling, propulsion, and the highly reliable software stack that enables our vehicles to accomplish their mission safely and autonomously.
Electrical Engineer - UUVs & Undersea Electronics Saronic Technologies IncElectrical Engineer - UUVs & Undersea ElectronicsAustin, TXThe Senior Electrical Engineer will work closely with mechanical, software, systems, autonomy, and test engineering teams to deliver reliable undersea platforms and payloads capable of operating in demanding subsea conditions. We are seeking a Senior Electrical Engineer to lead the design, development, integration, and testing of advanced electrical and electronic systems for unmanned underwater vehicles, undersea sensors, and subsea mission systems.
Build Reliability Engineer Starship Space Exploration Technologies CorpBuild Reliability Engineer StarshipTXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. BASIC QUALIFICATIONS: Bachelor''s degree in mechanical engineering, aerospace engineering, materials engineering, manufacturing engineering, chemical engineering, electrical engineering, or engineering physics.
Test Engineer Starship Development Space Exploration Technologies CorpTest Engineer Starship DevelopmentMcGregor, TXOperate and troubleshoot fluid and mechanical systems that include low to high-pressure gaseous working fluids and rocket propellants (including hypergols & cryogenics) as well as structural components and supporting infrastructure. Familiarity with instrumentation and control components (pressure transducers, thermocouples, resistance temperature detectors (RTDs), strain gauges, accelerometers, flow meters, load cells, relays, solenoid, pneumatic valves).
Process Engineer Starship Space Exploration Technologies CorpProcess Engineer StarshipTXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. BASIC QUALIFICATIONS: Bachelor''s degree in mechanical engineering, aerospace engineering, materials engineering, manufacturing engineering, chemical engineering, electrical engineering, or engineering physics.
Design Criteria Engineer Starship Space Exploration Technologies CorpDesign Criteria Engineer StarshipTXITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Ensure a cohesive evolution of designs and operations across the different technical teams: avionics, propulsion, structures, launch, manufacturing, analysis, and test.
Mechanical Engineer Intern (Summer 2027) Saronic Technologies IncMechanical Engineer Intern (Summer 2027)Austin, TXThis internship is ideal for students pursuing Mechanical Engineering, Aerospace Engineering, Mechatronics, Robotics, or a related field, and eager to make an impact in the defense technology industry. Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms.
Software Engineer IQUASAR LLCSoftware EngineerHouston, TXFull timeDesign, develop, test, integrate, and deploy software solutions such as propulsion, command & data handling (C&DH), environmental control and life support systems (ECLSS), guidance navigation and control (GN&C), caution and warning (C&W), networks, datalinks, power, and other flight systems. Bachelor of Science in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, Computer Engineering, Computer Science, Computer Information Systems, or another related technical discipline.