240 Results for

Quality Control Jobs in Cockeysville, MD

Jobs

Baltimore, MD

$30–$40 / hour
Contractor

WRA is currently seeking qualified Construction Administration/Document Control Specialist (Project Controls) for a major Design-Build project located in Baltimore, Maryland. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience.

19 days ago

Baltimore, MD

$20–$70 / hour
Full time

Candidates must also have all applicable MARTCP certificates (based on contract assignment type), Must have a current SHA Temporary Traffic Control Manager’s Training Course Card (or secure the same prior to work assignment) as well as MDE RPC Card and SHA E&S Yellow Card. All assigned personnel must also complete OSHA 10 hour training (training paid by WRA) and assist with completion of OOC Resume Packages for SHA approval prior to assignment to contracts.

4 days ago

Baltimore, MD

$20–$70 / hour
Full time

11 days ago

Owings Mills, MD

$25.50–$29.50 / hour
Temporary
Contractor

By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. -Support corrective action process by following up on corrective action requests, verifying the effectiveness of the actions taken and closure of requests .

9 days ago

Baltimore , Maryland

$35.50–$39.50 / hour

li>Perform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.) Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.

Why Join Us?

Our people are passionate about engineering innovation that improves lives and drives impactful change.

30+ days ago

Laurel, MD

Review contract deliverables and submittals for conformance and perform daily inspections to verify all work is in strict compliance with the contract, and request correction of any deficiencies. Minimum of 10 years construction management and/or craft supervision experience commercial or Government construction projects.

30+ days ago

Frederick , Maryland

$35.50–$39.50 / hour

Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measures.

15 days ago

Hanover, MD

$33.22–$49.86 / hour

Read drawings, comprehend specifications and tolerances, read dial indicators and digital gages, compare results with specifications and record test data, confer with engineers, technicians and production personnel as necessary. Today, we are a leading global provider of engineered products and services to several industries, including energy, defense, aerospace, entertainment/theme parks, materials handling, and science and research.

30+ days ago

Middle River, MD

$32–$40 / hour

Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.

28 days ago

li>Provide and maintain a quality control program directly related to Chimes District of Columbia required training programs and approved by the site contracting office, Chimes District of Columbia management, and building management.

To learn more about Chimes, and how you can achieve personal and professional growth within a purpose-driven organization, visit us at: https://chimes.org/Careers.

30+ days ago

Middle River, MD

$32–$40 / hour

For more information on these Regulations, click here ITAR Regulations.. Learn more about ITAR here..

19 days ago

Laurel, Maryland

a href="https://nam11.safelinks.protection.outlook.com/?url=http://www.iquasar.com/&data=05|02|iris.farooq@iquasar.com|d068de123b3f4e4b006b08de6f041da6|72471f4a841647668d32844e518fa248|0|0|639070260704108579|Unknown|TWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ==|0|||&sdata=KdRIFqVM+/tEqvHbKz53RuDdvyQGA8doOFCastKr2gM=&reserved=0" rel="nofollow">www.iQuasar.com.

One of our clients needs a Construction QC Inspector in Laurel, MD, for a long-term contract position.

Title:

30+ days ago

Gaithersburg, MD

$58,000–$76,000 / year

li style="font-family:'arial' , 'helvetica' , sans-serif;font-size:10pt">Collaboration and Communication: Work closely with manufacturing, engineering, and customer support teams to address quality issues and ensure seamless communication.

Continuous Improvement: Actively seek opportunities to improve inspection processes and contribute to the overall efficiency and effectiveness of the quality department.

19 days ago

Fort George G Meade, MD

Part time

Provide and maintain a quality control program directly related to Chimes District of Columbia required training programs and approved by the site contracting office, Chimes District of Columbia management, and building management. · Minimum two (2) years’ experience within the past five (5) years in performing quality control inspections or managing a quality control program for similar services.

30+ days ago

Middle River, MD

$26–$33 / hour

p>Important information:

FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope.

28 days ago

Middle River, MD

$32–$40 / hour
Full time

WHAT YOU’LL GET TO DO: Inspect incoming flight hardware and verify compliance with engineering drawings and specifications Review documentation packages and ensure all required paperwork is complete and accurate Evaluate drawing requirements and initiate NCRs for any nonconformances Perform mechanical inspections using calipers, micrometers, and other precision measurement tools Apply GD&T principles and interpret engineering blueprints Support inspection of composite components and large structures Work in a fast paced environment that may require long days and weekend support YOU’LL BRING THESE QUALIFICATIONS: 8+ years of experience in aerospace or equivalent inspection High school diploma or equivalent Strong understanding of GD&T and blueprint interpretation Proficiency with mechanical measurement tools (calipers, micrometers, etc.) Ability to inspect incoming flight hardware and review documentation packages Experience evaluating drawing requirements and issuing NCRs Ability to work in a fastpaced environment with extended hours as needed THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience with CMM and laser tracker systems Familiarity with Inspire and PolyWorks software Experience with NDT scanning Background performing critical alignments on large structures Experience working with composite materials ADDITIONAL REQUIREMENTS: Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.

29 days ago

Frederick , Maryland

$90,640–$135,960 / year

This role is responsible for supervising QC personnel, ensuring contract compliance, driving consistent implementation of the 3-Phase Quality Control process, and serving as the primary quality liaison with project leadership, General Contractors, and Owners.

The Electrical QC Supervisor provides day-to-day leadership of quality control activities on assigned projects.

30+ days ago

Middle River, MD

$26–$33 / hour

For more information on these Regulations, click here ITAR Regulations.. Learn more about ITAR here..

19 days ago

Dundalk, MD

p>For description, see this url: https://www.almacgroup.com/careers/apply/?gnk=job&gni=8a7887ac9d02e529019d1a915fbf68d0.

30+ days ago

Rockville, MD

$55,920.80–$83,881.20 / year

Additional responsibilities include incubation and enumeration of media plates and samples, processing plates for microbial identification through external laboratories, operating laboratory instruments in accordance with SOPs, and documenting data accurately in electronic systems following ALCOA+ principles. In this role, you will support routine microbiological quality control activities such as Rapid Sterility, Mycoplasma, Bioburden, Endotoxin, Growth Promotion, and Cell Aliquoting under approved methods and cGMP/GDP expectations.

23 days ago

Middle River, MD

$26–$33 / hour
Full time

WHAT YOU’LL GET TO DO: Inspect incoming flight hardware and verify compliance with engineering drawings and specifications Review documentation packages and ensure all required paperwork is complete and accurate Evaluate drawing requirements and initiate NCRs for any non‑conformances Perform mechanical inspections using calipers, micrometers, and other precision measurement tools Apply GD&T principles and interpret engineering blueprints Support inspection of composite components and large structures Work in a fast‑paced environment that may require long days and weekend support YOU’LL BRING THESE QUALIFICATIONS: 5+ years of experience in aerospace or equivalent inspection High school diploma or equivalent Strong understanding of GD&T and blueprint interpretation Proficiency with mechanical measurement tools (calipers, micrometers, etc.) Ability to inspect incoming flight hardware and review documentation packages Experience evaluating drawing requirements and issuing NCRs Ability to work in a fast‑paced environment with extended hours as needed THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience with CMM and laser tracker systems Familiarity with Inspire and PolyWorks software Experience with NDT scanning Background performing critical alignments on large structures Experience working with composite materials ADDITIONAL REQUIREMENTS: Sit at desk and operate computer, keyboard and office equipment for extended periods Use hands with dexterity to operate controls, tools and technical equipment, as needed Read technical documents, drawings, and computer screens requiring close and distance vision Move between buildings, labs, and work areas, as needed Work in office and technical environments with occasional exposure to noise, dust and fumes in production areas. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable.

29 days ago

$112,400–$122,400 / year

p>The Quality Control Manager (QCM) serves as the Contractors designated representative responsible for implementation and management of the Contractor Quality Control (CQC) System in accordance with USACE, NAVFAC, and DoD requirements, including EM 385-1-1 and applicable UFC/UFGS specifications. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders.

30+ days ago

LINTHICUM, Maryland

$112,400–$122,400 / year

The Quality Control Manager (QCM) serves as the Contractor’s designated representative responsible for implementation and management of the Contractor Quality Control (CQC) System in accordance with USACE, NAVFAC, and DoD requirements, including EM 385-1-1 and applicable UFC/UFGS specifications. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields – each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders.

30+ days ago

Sparks, MD

$25–$35 / hour
Temporary

Rose International has an official agreement (ID #132522), effective June 30, 2008, with the U.S. Department of Homeland Security, U.S. Citizenship and Immigration Services, Employment Verification Program (E-Verify). The Incoming Mechanical/Electrical Inspector II is responsible for effectively interacting with all levels of associates and all functional departments in the organization.

15 days ago

Remote

$90,500–$119,000 / year

Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. On top of working in a highly supportive, friendly, respectful environment, this is what you can expect when you join our team as a Regular Full-Time employee: Flexible, compressed work schedules, depending on business requirements, where you have the option of Fridays off, as well as the possibility to work remote part-time.

30+ days ago

Columbia, Maryland

li>

Ability to communicate effectively with, persuade, and gain “buy-in” from, a broad range of stakeholders (e.g., executive team, leadership team, Business Unit Leaders, direct reports, clients, trade partners, and third party providers.

As a Quality Control Manager, you will ensure the project is built within contract document specifications, owner requirements, and comply with local, state, and federal building codes.

29 days ago

As an independent Brand Representative, you will act as a key liaison between the brand and retail store environments, conducting recurring in-store visits to perform audits, ensure product quality, and elevate the brand experience. Through innovative in-store retail technology solutions, we bring products to life inside retail environments, helping brands optimize performance and grow in today's dynamic retail landscape.

10 days ago

Fort Meade, Maryland

li>

Conduct detailed inspections of exterior and interior architectural elements, including exterior envelope (waterproofing, façade systems, roofing, windows, doors) and interior finishes (drywall, doors/frames/hardware, painting, floor finishes, wall finishes, and millwork) for compliance with contract documents, approved submittals, and mock-ups.
Ability to communicate effectively with, persuade, and gain “buy-in” from, a broad range of stakeholders (e.g., executive team, leadership team, Business Unit Leaders, direct reports, clients, trade partners, and third party providers.

29 days ago

Glen Rock, Pennsylvania

Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered.

Working knowledge of analytical techniques and instrumentation including HPLC, GC, GPC, UV-Vis, FT-IR, Karl Fischer, potentiometric titrations, spectrophotometry, and kinematic viscometry.

30+ days ago

Rockville, MD

$112,604.80–$168,907.20 / year

Analytical testing: Perform and oversee QC testing for cell therapy products (flow cytometry, ELISA, PCR, cell based assays, cell count/viability) per approved methods, ensuring adherence to cGMP, GDP, and data integrity expectations (ALCOA+). The role focuses on right‑first‑time analytical assay execution (e.g., flow cytometry, ELISA, PCR, automated cell counting, and other cell‑based assays) and end‑to‑end laboratory readiness, including people and equipment oversight.

20 days ago

Rockville, MD

$112,604.80–$168,907.20 / year

20 days ago

Baltimore, Maryland

This position requires that the employee must successfully complete criminal history information background check and drug screening and be able to obtain and maintain a government security clearance.

Develop, maintain, and audit quality assurance procedures and inspection procedures and inspection checklists; track and report quality metrics and trends.

30 days ago

Rockville, Maryland

div>

Samsung Biologics is seeking a QC Bioanalytical Senior Associate Analyst to perform cell-based bioassays and immunoassays in support of testing biopharmaceutical raw materials, in-process samples, and drug substance under cGMP conditions. The final salary offered to a successful candidate may vary, and will be dependent on several factors that may include but are not limited to: the type and length of experience within the job, type and length of experience within the industry, skillset, education, business needs, etc.

3 days ago

$125,000–$165,000 / year

p>• Three years' experience as a quality control manager on industrial or commercial projects • Quality Manager with a minimum of 10 years in related work • BS degree in engineer, architect, or construction management with 5 years of experience as a construction Contractor Quality Control Manager / Contractor Quality Control System Manager / Quality Control Manager • Completed USACE/NAVFAC Construction Quality Management for Contractors (CQM-C) Training with the past 5 years • ICD/ICS 705 training • Experience on projects exceeding $500,000 (specifically HVAC and electrically heavy projects) • Experience working with the USACEMust be US Citizen • OSHA 30 Certification (can be obtained after employment) • Valid Driver's License • Current or ability to get a security clearance • Knowledge, Skills and Abilities • Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67 • Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values.

• Previous Federal DoD contract experience • Management of task order projects in the Washington DC region • Ability to read drawings / prints • Safety experience in multi-trade construction projects • Knowledge of OSHA and EM-385 requirements • Experience enforcing corporate or site quality control programs • Written and Oral communication with customer, subcontractors, and internally to provide project updates • Knowledge with all aspects of a construction project (electrical, HVAC, Fire Alarm, Fire Suppression, architectural, etc.).

30+ days ago

Jessup, Maryland

They will spot check projects during installations and ensure that the crews are following the installation specification set forth by the management and perform all final quality control checks of every project once they are completed. Premier Benefits:

2 Health Insurance Plans:
- No Cost “Core Plan” – No Cost Medical & Dental.

30+ days ago

Laurel, MD

$18.56–$27.79 / hour

p>Country Code+1+1242+1246+1264+1268+1284+1340+1441+1473+1649+1664+1670+1671+1684+1758+1767+1784+1849+1868+1869+1876+1939+20+211+212+213+216+218+220+221+222+223+224+225+226+227+228+229+230+231+232+233+234+235+236+237+238+239+240+241+242+243+244+245+248+249+250+251+252+253+254+255+256+257+258+261+262+264+265+266+267+268+269+27+290+291+297+298+299+30+31+32+33+34+345+350+351+352+353+354+355+356+357+358+359+36+370+371+372+373+374+375+376+377+378+379+380+381+382+385+386+387+389+39+40+41+420+421+423+43+44+45+46+47+48+49+500+501+502+503+504+505+506+507+508+509+51+52+53+54+55+56+57+58+590+591+593+594+595+596+597+598+599+60+61+62+63+64+65+66+670+672+673+674+675+676+677+678+679+680+681+682+683+685+686+687+688+689+690+692+7+77+81+82+84+850+852+853+855+856+86+872+880+886+90+91+92+93+94+95+960+961+962+963+964+965+966+967+968+970+971+972+973+974+975+976+977+98+992+993+994+995+996+998Phone Number.

Job CategorySelect a Job CategoryAdministrationCommunications FamilyCorporate AffairsCustomer SuccessData AnalysisFinanceHuman ResourcesLegalMaintenanceManufacturingMerchandisingOperationsProject ManagementProperty ManagementQuality AssuranceSalesSupply ChainTechnologyTransportationUSA Fleet/Transportation; USA Talent Acquisition Driver; USA OperationsWarehouse.

30+ days ago

Fort Meade , Maryland

$150,080–$225,120 / year

Qualifications:

Must have Bachelor's degree in Engineering, Architecture, Construction Management, Engineering Technology, Building Construction, or Building Science with a minimum of 10+ years’ experience as a Project Superintendent, QC Manager, Project Manager, Project Engineer or Construction Manager OR 15+ with a HS diploma. M.C. Dean is headquartered in Tysons, Virginia, and employs more than 5,800 professionals who engineer and deploy automated, secure, and resilient power and technology systems; and deliver the management platforms essential for long-term system sustainability.

30+ days ago

Gaithersburg, MD

p>POSITION SUMMARY:

The Quality Control Associate provides support to the Bioanalytical Laboratory (BAL) staff for sample testing studies, including those performed under applicable elements of Good Laboratory Practices (GLP) and/or Good Clinical Laboratory Practices (GCLP), under direct supervision.

Communicates and works with bioanalytical principal investigators (BPIs), study coordinators, and lab personnel to resolve any identified issues and ensures all issues are resolved in a timely manner.

30+ days ago

Rockville, MD

$52,400–$76,000 / year

p>POSITION SUMMARY:

Under general supervision, the Quality Analyst I performs routine quality control inspection, testing and data analysis for various incoming materials, in-process samples, and final products within MSD's protein-based immunoassay catalog. This salary range represents a general guideline as MSD considers other factors when presenting an offer of employment, such as scope and responsibilities of the position, external market factors, and the candidate's knowledge, skills, abilities, education and experience.

11 days ago

Rockville, MD

1-2 years executing routine and non-routine analysis for cGMP lot release and stability testing using techniques including, but not limited to, cell culture, flow cytometry and cell-based methods, PCR (dPCR, qPCR), immunoassays (ELISA), etc. Receive, verify, label, store, and track samples, controls, and reagents to ensure traceability and timely transfer to testing laboratories, using paper and electronic systems and operating temperature-controlled units.

30+ days ago

Hanover, PA

Qualifications BS Engineering discipline or other technical degree required 8-10 years of experience within a manufacturing setting with direct supervisory experience Travel Negligible to 10% Exceptional and Demonstrated Problem Solving Skills Quality Planning/Test Planning Experience working with external customer quality issues Superior personal computer skills including MS Office Suite, Strategic Planning software, Project Management software systems. ASME/Mil Spec Experience Preferred Six Sigma/Lean Certification preferred Welding Knowledge Experience in NQA-1, ASME Section 3 preferred Preferred metallurgical or welding experience Working Conditions Remains in a stationary position 50% of the time and involves additional physical demands such as ascending/descending stairs, walking stooping and standing.

30+ days ago

Rockville, Maryland

ul>

10+ years industrial experience in biopharmaceutical industry, such as Biochemistry, Analytical Chemistry, Microbiology or related field, particularly in the area of assessing physiochemical characteristics of product purity, activity and functional indicators of biological products, along with 8+ years of supervisory and managerial experiences is desired.

Analytical and microbiological testing and release of all components, raw materials, excipients, intermediates, active pharmaceutical ingredients (APIs), finished product and stability samples, if applicable.

30+ days ago

Annapolis Junction, MD

Bachelor's degree in Statistics, Mathematics, Computer Science, Risk Management, Cyber Security, or related field AND 2+ years of experience in one or more of: software development lifecycle, large-scale computing, threat modeling, cyber security, anomaly detection (or equivalent experience). Master's degree in Statistics, Mathematics, Computer Science, Risk Management, Cybersecurity, or related field AND 1+ year of experience in one or more of: security, risk, threat modeling, anomaly detection, or large-scale systems.

30+ days ago

Hunt Valley, MD

Full time

Solar Gaines is seeking a Quality Control Manager who will oversee diligence and quality control at various critical touch points throughout the project development and deployment process, beginning with site visits to assess PV installation, and culminating in construction quality inspections and final handoff review. Responsibilities

Perform multiple audits/site visits to monitor the quality of the installation for all commercial projects in the assigned region.

Today

Hanover, MD

We deliver organic produce, high-quality meats and seafood, plant-based proteins, dairy, bakery, wine, and other grocery items to nearly every zip code in 48 states at up to 30 percent off traditional grocery store prices. In 2022, Misfits Market acquired sustainable e-grocer Imperfect Foods and now leverages its in-house transportation network to deliver directly to consumers with one of the most carbon-efficient grocery delivery models on the market.

30+ days ago

Baltimore, Maryland

Mercy Medical Center is honored to be recognized by Newsweek as one of America's Most Trustworthy Companies for three consecutive years (2023–2025) and as one of America's Greatest Workplaces for Women in 2025. Responsibilities: The Radiology Quality Control Technologist acts as resource in facilitating critical results communication between Radiologists and referring providers according to critical results policy guidelines.

10 days ago

Baltimore, MD

p>You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.

DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.

30+ days ago

Baltimore, MD

Field positions will be exposed to various unfamiliar conditions where Personal Protective Equipment (PPE) must be worn, which may include but are not limited to manufacturing and warehouse plants, and other locations as directed by supervisor.

Experience in quality control testing procedures and internal and external sanitation of beverage equipment with a clear understanding of all aspects of blending product attributes, recordkeeping, yields, etc.

30+ days ago

Baltimore, MD

The employee frequently is required to use hands and fingers, to handle, or feel, sit for long periods of time, stand frequently, bend, squat, reach and turn to access files and office equipment. Field positions will be exposed to various unfamiliar conditions where Personal Protective Equipment (PPE) must be worn and which may include, but are not limited to manufacturing and warehouse plants, and other locations as directed by supervisor.

30+ days ago

Sparks, MD

3 Must haves on resume

Hand tool experience ( calipers, micrometers, scale).
- 3+ years quality experience or equivalent training.

30+ days ago

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Quality Control job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

Quality Control Jobs in Cockeysville, MD

Construction Administration/Field Document Control Specialist Whitman, Requardt & Associates, LLP

Construction Inspector (TET II – TET V) Whitman, Requardt & Associates, LLP

Construction Inspector (TET III – TET V) Whitman, Requardt & Associates, LLP

Quality Technician Synerfac Technical Staffing

Electrical Quality Control Inspector M.C. Dean, Inc

Construction Quality Control Inspector IQUASAR LLC

Electrical Quality Control (QC) Inspector M.C. Dean, Inc

Quality Control Inspector Oceaneering International Inc

Senior Incoming Quality Control Inspector Rocket Lab Corp

Quality Control Inspector (Custodial Operations - AM Shift) Chimes Inc

Senior Incoming Quality Control Inspector Rocket Lab Corporation

Construction Quality Control Inspector Cb

Quality Control Inspector Xometry

Quality Control Inspector (Custodial Operations - AM Shift) Chimes District of Columbia, Inc

Incoming Quality Control IQC Inspector III - Mechanical Rocket Lab Corp

Senior Incoming Quality Control Inspector Rocket Lab USA

Electrical Quality Control Supervisor M.C. Dean, Inc

Incoming Quality Control (IQC) Inspector III – Mechanical Rocket Lab Corporation

Quality Control Inspector – Grade 1 Almac Group Ltd

Associate Quality Control Quality Microbiology, Cell Therapy AstraZeneca Plc

Incoming Quality Control (IQC) Inspector III – Mechanical Rocket Lab USA

QUALITY CONTROL MANAGER Chugach Government Solutions, LLC

QUALITY CONTROL MANAGER Chugach Government Solutions

Quality Control Technician Jobs in USA, MD, Sparks | Rose International Job Rose International

Senior Quality Control Analyst Lockheed Martin Corp

Quality Control Manager Clark Construction Group

Brand Rep - Audits Merchandising and Quality Control - 24hr ThirdChannel, Inc.

Quality Control Specialist (Architectural) Clark Construction Group

Ability to communicate effectively with, persuade, and gain “buy-in” from, a broad range of stakeholders (e.g., executive team, leadership team, Business Unit Leaders, direct reports, clients, trade partners, and third party providers.

Quality Control Chemist (at Gelest) Gelest

Manager Quality Control Analytical (Sunday-Wednesday) AstraZeneca Plc

Manager Quality Control Analytical (Wednesday - Saturday) AstraZeneca Plc

Quality Control Manager - Custodial Melwood

Quality Control Samsung Biologics RKV

Construction Quality Control Manager Bering Straits Native Corporation

Quality Control Technician (Roofing) CentiMark Corporation

Quality Control Associate Sysco Corp

Quality Control Manager - Ft. Meade, MD M.C. Dean, Inc

Quality Control Associate Bioanalytical Laboratory Meso Scale Diagnostics LLC

Quality Control Analyst I Meso Scale Diagnostics LLC

Quality Control Laboratory Specialist Mindlance

Sr. Manager, Quality Control ESAB Corp

Director, Quality Control Samsung Biologics RKV

Quality Control Program Manager Cencore Group LLC

Quality Control Manager Solargaines

Quality Control Lead Misfits Market Inc

Imaging Quality Control Tech Mercy Medical Center

Quality Control Technician DAP Global Inc

Quality Control Technician National Beverage Corp

Quality Control Technician II National Beverage Corp

Tech 2, Quality Control HCL Global Systems Inc.

Resume Resources

Get noticed by top employers!