Sterile Processing Technician (Days) - Outpatient Surgery Center University of WashingtonSterile Processing Technician (Days) - Outpatient Surgery CenterSeattle, WashingtonNearly 29,000 healthcare professionals, researchers, and educators work in the UW Medicine family of organizations that includes: Harborview Medical Center, UW Medical Center - Montlake, UW Medical Center - Northwest, Valley Medical Center, UW Medicine Primary Care, UW Physicians, UW School of Medicine, and Airlift Northwest. As the region's only Level I Trauma center, Harborview Medical Center is well known for innovations and excellence in trauma care and its centers of emphasis: Trauma, Burn, Neurosciences, AIDS/STD CARER, and mentally and medically vulnerable populations.
6L9CI3-Test & Evaluation Lab Tech 3 Lancesoft6L9CI3-Test & Evaluation Lab Tech 3Seattle, WA$39.54Responsibilities: You will be responsible for configuring test bed per test procedures and operate lab test equipment, including current transformer probes, oscilloscopes, multimeters, and data acquisition systems. As well, you will be responsible for repairing and maintaining lab test equipment that requires the ability to troubleshoot circuits and solder repairs.
Integration & Test Engineer (Bus & Payload Sub-Assemblies) SpaceXIntegration & Test Engineer (Bus & Payload Sub-Assemblies)Redmond, WA$100,000–$115,000 / yearINTEGRATION & TEST ENGINEER (BUS & PAYLOAD SUB-ASSEMBLIES) As an Integration and Test Engineer, you will lead the development of manufacturing and test processes of sub-assemblies (sensors, instruments, actuators, batteries, and antennas) used to navigate and operate the Starlink satellite. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Integration & Test Engineer (Starlink Propulsion) SpaceXIntegration & Test Engineer (Starlink Propulsion)Redmond, WA$100,000–$115,000 / yearRESPONSIBILITIES: + Manage integration build flow and test operations + Evaluate proposed designs for manufacturability and integration + Interface with both engineers and technicians to optimize manufacturing and automation + Regularly challenge each process, part, and operation while working closely with design/development engineers to create the most manufacturable and reliable satellite hardware possible + Maintain a sense of holistic ownership over the production line including process consistency, quality, tooling, capital equipment, ergonomics, and safety + Enable day-to-day execution of the vehicle integration and test flow + Evaluate non-conformances to determine root cause and create actionable items and system improvements BASIC QUALIFICATIONS: + Bachelor's degree in an engineering discipline + 1+ years of hands-on fabrication, assembly, testing, and/or project management experience via internships, labs, clubs, extracurricular activities, or professional industry experience PREFERRED SKILLS AND EXPERIENCE: + Experience with integration and testing of propulsion, thermal, electrical, and/or structural systems + Understanding of test methods/setups and data acquisition systems + Experience working with composites and integration of avionics systems + Documentation and configuration management experience + Experience writing test plans, and procedures and providing go/no-go judgment and rationale + Experience in a production environment + Demonstrated engineering intuition, critical thinking, and comfort with ambiguity + Experience with 3D CAD software (e.g. INTEGRATION & TEST ENGINEER (STARLINK PROPULSION) As an Integration & Test engineer for Starlink propulsion you will have the opportunity to develop, implement, and optimize production processes for key sub-assemblies and components of the propulsion system comprised of the Argon Hall Thruster, propellant feed systems, and satellite primary structure.
Non-Destructive Test (NDT) Inspector Lockheed MartinNon-Destructive Test (NDT) InspectorSilverdale, WAAbility to obtain and retain a DOD secret level security clearance DOD interim secret clearance required to start **Desired Skills:** American Welding Society \(AWS\) Certified Weld Inspector \(CWI\) certification\. **Basic Qualifications:** KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED Level I requires documentation of formal training and OJT with certified Level II personnel when performing Level II inspections in various methods\.
Manufacturing Specialist, Components Test Space Exploration TechnologiesManufacturing Specialist, Components TestRedmond, WA$34–$40 / hourWe are looking for a talented manufacturing specialist to support the production of Starlink satellites, specializing in the acceptance testing of satellite components, development of advanced electrical test systems, and evolution of production and testing processes. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Integration & Test Engineer (Bus & Payload Sub-Assemblies) Space Exploration TechnologiesIntegration & Test Engineer (Bus & Payload Sub-Assemblies)Redmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Integration & Test Engineer (Starlink) Space Exploration TechnologiesIntegration & Test Engineer (Starlink)Redmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Mechanical Integration And Test Engineer (Starlink) Space Exploration TechnologiesMechanical Integration And Test Engineer (Starlink)Woodinville, WA$100,000–$117,500 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Integration & Test Engineer (Starlink Aviation) SpaceXIntegration & Test Engineer (Starlink Aviation)Woodinville, WA$100,000–$117,500 / yearAs an Integration & Test Engineer supporting our enterprise aviation customers, you will be tasked with owning test software, test equipment, integrated testing of electrical and network systems, and will be a technical resource for fellow engineering, specialist and technician colleagues. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Mechanical Integration and Test Engineer (Starlink) SpaceXMechanical Integration and Test Engineer (Starlink)Woodinville, WA$100,000–$117,500 / yearTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Integration & Test Engineer (Starlink Aviation) Space Exploration TechnologiesIntegration & Test Engineer (Starlink Aviation)Woodinville, WA$100,000–$117,500 / yearAs an Integration & Test Engineer supporting our enterprise aviation customers, you will be tasked with owning test software, test equipment, integrated testing of electrical and network systems, and will be a technical resource for fellow engineering, specialist and technician colleagues. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Integration & Test Engineer (Starlink) SpaceXIntegration & Test Engineer (Starlink)Redmond, WA$100,000–$115,000 / yearTo conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Integration & Test Engineer (Starlink Propulsion) Space Exploration TechnologiesIntegration & Test Engineer (Starlink Propulsion)Redmond, WA$100,000–$115,000 / yearITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. As an Integration & Test engineer for Starlink propulsion you will have the opportunity to develop, implement, and optimize production processes for key sub-assemblies and components of the propulsion system comprised of the Argon Hall Thruster, propellant feed systems, and satellite primary structure.
Manufacturing Specialist, Components Test SpaceXManufacturing Specialist, Components TestRedmond, WA$34–$40 / hourWe are looking for a talented manufacturing specialist to support the production of Starlink satellites, specializing in the acceptance testing of satellite components, development of advanced electrical test systems, and evolution of production and testing processes . To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Starlink Integration & Test Engineer (Aviation) SpaceXStarlink Integration & Test Engineer (Aviation)Woodinville, WA$100,000–$115,000 / yearRESPONSIBILITIES: + Design, activate and operate test hardware and equipment including test software as needed to evaluate component and system performance for various mobility network applications + Troubleshoot hardware issues real-time, push feedback to correct owners to eliminate repeat issues + Aid in investigations and root-cause analysis of any non-conformances, and work with responsible engineers to develop test requirements for flight hardware, driving hardware and system design improvements. As an Integration & Test Engineer supporting our enterprise aviation customers, you will be tasked with owning test software, test equipment, integrated testing of electrical and network systems, and will be a technical resource for fellow engineering, specialist and technician colleagues.
Sr. Production Control Specialist, Test Ops Maintenance Blue Origin Enterprises LPSr. Production Control Specialist, Test Ops MaintenanceSeattle, WA$115,256–$161,357.70 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
NewTest Design Engineer II (fixed term) Blue Origin Enterprises LPTest Design Engineer II (fixed term)Seattle, WA$99,201–$138,880.35 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Test Engineer III Blue OriginTest Engineer IIISeattle, Washingtonand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing, vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Test Design Engineer II Blue Origin Enterprises LPTest Design Engineer IISeattle, WA$99,201–$138,880.35 / yearand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Aerospace Technician The Staffing Resource Group, IncAerospace TechnicianKent, WA$45–$47 / hourSRG Government Services is a leading provider of information technology, training, engineering, accounting and intelligence analytical services for agencies in the intelligence, defense, homeland security, cyber security, and federal civilian markets. SRG utilizes an innovative approach to identify and qualify talent that is unique to the federal contracting industry, featuring a cutting-edge platform that allows us to rapidly and precisely match professionals to client requirements.
Veterinary Technician VCA Animal HospitalsVeterinary TechnicianRedmond, WA$30–$35 / hourEducation:** Continuing Education (CE) allowance for veterinarians and credentialed veterinary technicians, along with access to WOOF University®, which includes RACE-approved courses. Location : 16390 NE 87th St, Redmond, WA 98052 Compensation : $ 30 - $ 35 / hr Schedule : FT with rotating Saturdays Why join the Redwood Animal Hospital Team : **Benefits:** VCA offers a comprehensive benefits package to support the health, well-being, and professional development of its associates.
Veterinary Technician VCA IncVeterinary TechnicianEverett, WA$28–$34 / hourEducation: Continuing Education (CE) allowance for veterinarians and credentialed veterinary technicians, along with access to WOOF University, which includes RACE-approved courses. Management reserves the right to revise the job description or require that other tasks be performed when the circumstances of the job change (for example, emergencies, change in personnel, workload, or technical development).
Network Support Technician ManTech International CorpNetwork Support TechnicianBremerton, WA$65,000–$107,900 / yearThere are differentiating factors that can impact a final salary/hourly rate, including, but not limited to, Contract Wage Determination, relevant work experience, skills and competencies that align to the specified role, geographic location (For Remote Opportunities), education and certifications as well as Federal Government Contract Labor categories. Analyze, test, troubleshoot, and evaluate existing network systems-such as Local Area Networks (LAN), Wide Area Networks (WAN), and Internet systems-to ensure networks operate correctly with minimal interruption.
Traffic Safety Technician AWP SafetyTraffic Safety TechnicianTacoma, WA$21.30–$23 / hourWe give you a hard hat, safety goggles, a safety vest, safety whistle, walkie talkie, and cold/hot weather gear: you bring your own steel toe safety boots that go above the ankle. Integrity, an AWP company, considers any position that requires the individual to drive an Integrity/ AWP vehicle and/or be present at an AWP worksite for any reason a safety sensitive position.
Maintenance Technician Trainee CTL Management IncMaintenance Technician TraineeKent, WACompany events that may include annual bowling, golf tournament, picnics, team-building days, annual holiday party, casual days and year-round "Just for Fun" activities/contests. With over 10,000 apartments in Oregon, California and Washington, CTL Management is currently seeking entry level Maintenance Technicians to join our team of professionals.
NewTest Engineer System OneTest EngineerBellevue, WA$52–$85 / hourThe selected candidate will work closely with multidisciplinary engineering teams, scientists, and technicians to ensure testing is completed safely, accurately, and in accordance with project requirements. Bachelor's degree in Mechanical Engineering, Nuclear Engineering, Electrical Engineering, Chemical Engineering, or a related engineering discipline.
SMT Rework Technician Space Exploration Technologies CorpSMT Rework TechnicianRedmond, WA$27–$33 / hourAs an SMT (Surface-Mounted Technology) Rework Technician you would be joining a small team that supports PCBA (Printed Circuit Board Assembly) rework with the highest grade of difficulty and harness repairs coming from a variety of our Starlink Production Departments. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Equipment Maintenance Technician ImiaEquipment Maintenance TechnicianBremerton, WashingtonRegularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, heights, confined spaces, precarious places, proximity to other employees. Responsible for the installation, maintenance, troubleshooting, repair, and disconnection of electrical operations present at assigned job sites.
NewStarlink Production Technician - PCBA Space Exploration Technologies CorpStarlink Production Technician - PCBARedmond, WA$22–$26.50 / hourRESPONSIBILITIES: Operated PCB assembly machines to manufacture circuit boards, including SMT placement, reflow soldering, solder paste printing, conformal coating, masking, epoxy application, selective coating, optical inspection, and X-ray inspection. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Test & Commissioning Site Supervisor System OneTest & Commissioning Site SupervisorBellevue, Washington$90,000–$120,000 / yearThe Commissioning Supervisor ensures installation quality, test performance, issue resolution, and effective communication between the depot team, engineering, and the Project Manager. Minimum 5 years of experience in commissioning, testing, or maintenance of electrical or control systems (rail, industrial, or automotive sectors preferred).
Quality Assurance Technician Radiant Vision SystemsQuality Assurance TechnicianRedmond, WAWe are seeking a Quality Assurance Technician to play a key role in assembling, calibrating, testing, and evaluating KMSA products while also supporting Quality Assurance activities such as RMA oversight, diagnostics, documentation, and process improvement. Konica Minolta Sensing Americas, Inc. works with leading brands, manufacturers, and research organizations to provide advanced measurement solutions that support product quality, consistency, innovation, and performance.
Controls Technician Data Center Facilities PkazaControls Technician Data Center FacilitiesSumner, WAA fully competent Data Center Onsite Controls Technician - Applies an intensive and diversified knowledge of complete Controls and Building automation systems platforms such as EPMS (Electrical and Power Monitoring Systems), BAS Systems (Building Automation Systems), or BMS System (Building Monitor Systems) in a data center environment - testing and operations. They will collaborate with the Electrical and Mechanical Engineering / Design teams, Software Development teams, Project Managers, Construction Contractors, Equipment Vendors, Field Techs and other Site Operations teams to ensure the reliability, proper operations, acceptance of new and modified installations, automations and software solutions.
Senior Automotive Technician Bigfoot StaffingSenior Automotive TechnicianBellevue, WashingtonWe are searching for a talented and motivated Senior Automotive Technician to join a high-performing service team specializing in luxury, exotic, and classic vehicles including Aston Martin and Lotus. If you’re a senior-level technician who thrives in a clean, professional shop environment and loves working with luxury and performance vehicles, we’d love to hear from you.
New["High Voltage Test Technician","High Voltage Test Technician"] Helion Energy["High Voltage Test Technician","High Voltage Test Technician"]EverettYou will work closely with Design Engineers, Test Engineers, and Production Technicians to validate system performance, identify issues, and continuously improve test execution. You will tackle real-world challenges with a team that prizes urgency, rigor, ownership, and a commitment to delivering hard truths – values essential to achieving what no one has before.
Sterile Processing Technician 2 (Weekends, 90%) University of WashingtonSterile Processing Technician 2 (Weekends, 90%)Seattle, WAAs the region's only Level I Trauma center, Harborview Medical Center is well known for innovations and excellence in trauma care and its centers of emphasis: Trauma, Burn, Neurosciences, AIDS/STD CARER, and mentally and medically vulnerable populations. Assemble and set up patient equipment such as IV pumps, vacuum regulators (wall suction), chest pumps, hyper/hypothermia units; test and make minor repairs and adjustments to equipment.
ESC Service Technician 2 OSI Systems, IncESC Service Technician 2Snoqualmie, Washington$23–$24 / hourOperate real-time oscilloscope, digital multimeter, frequency counter, signal generator, phase meter, digital voltmeter, frequency and pulse generators, power supplies, special AC test fixtures, other electronic equipment and hand tools such as a soldering iron. Driven by the belief that anyone who seeks care could be a member of our own family, our team is dedicated to solving the greatest challenges the healthcare system currently faces, including the need to enhance the patient experience, improve population health, reduce costs, support care team well-being and advance health equity.
Automotive Technician â Full Benefits, Paid Training & Great Culture Mechanics & Body Shops MarketplaceAutomotive Technician â Full Benefits, Paid Training & Great CultureSeattle, WashingtonRelated keywords: tech, mechanic, automotive technician, automotive, diagnostic technician, A technician, ASE, auto repair, electrical, foreman, automotive jobs, auto tech, lead tech, independent shop, B technician . If you are a skilled automotive technician with basic to strong diagnostic skills and you value teamwork, communication, and professionalism, weâd love to meet you.
Mobile Diesel Mechanic / Field Diesel Technician - Pacific, WA Freightliner NorthwestMobile Diesel Mechanic / Field Diesel Technician - Pacific, WAPacific, Washington$20–$50 / hourFull timeHelping customers satisfy their transportation needs since 1986, Gordon Truck Centers, Inc. (GTC) is an expanded network of 19 dealerships doing business as Gordon Truck Centers, Freightliner Northwest, Western Star Northwest, TrailerCraft, Western Mountain Bus and Freightliner of Hawaii. With the help of a team and leadership you can rely on as well as training to build your skillset, we’ll coach and encourage you every step of the way in well equipped, safe facilities where you’re empowered to do what’s right - whether you’re performing routine maintenance or complete engine overhauls.
Clinical Laboratory Technician 2, Eastside Specialty Center University of WashingtonClinical Laboratory Technician 2, Eastside Specialty CenterSeattle, WAAbout** **the Department of Laboratory Medicine & Pathology** **:** A regional resource for clinical laboratory services required for innovative patient care, research and educational programs, the **Department of Laboratory Medicine & Pathology** at UW Medicine combines the sophisticated testing and informatics capabilities of fully accredited laboratories with the resources of an academic institution in its delivery of clinical and anatomic pathology services. Nearly 29,000 healthcare professionals, researchers, and educators work in the UW Medicine family of organizations that include Harborview Medical Center, UW Medical Center - Montlake, UW Medical Center - Northwest, Valley Medical Center, UW Medicine Primary Care, UW Physicians, UW School of Medicine, and Airlift Northwest.?
Quality Technician LMI Aerospace IncQuality TechnicianAuburn, WA$25–$32 / hourOur team of experts is dedicated to staying ahead of the curve in the aerospace and defense industry, utilizing the latest technologies and processes to ensure that we deliver the best possible solutions to our customers. Sonaca North America does not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings.
Manufacturing Quality Control Lead Technician Cascade Coffee, Inc.Manufacturing Quality Control Lead TechnicianEverett, WA$24–$28 / hourFounded in 1977, the company operates from a 150,000 square foot manufacturing and roasting facility, more than 2 million pounds of green coffee storage facility, 50 million pounds annually of coffee roasting capacity as well as multiple roasting lines, flavor mixing systems and 14 automated packaging lines. Cascade works behind the scenes to provide innovation, world-class coffee roasting, and a wide variety of packaging options to highlight their loyal customer's brands.
NDT Technician - Level 2 (Aerospace) Primus International LLCNDT Technician - Level 2 (Aerospace)Woodinville, WAFull timeGood knowledge of common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines/Scanners. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.
Field Technician II Pape Material Handling IncField Technician IISeattle, WA$32–$48 / hourFull timep>Each day, you’ll work on all makes and models of material handling equipment, diagnosing and repairing a wide range of systems including electric forklift systems, LPG and diesel engines, transmissions, hydraulics, carburetors, electrical and air systems, final drives, clutches, and more. You’ll be out in the field delivering expert service, performing high-quality repairs and maintenance on cutting-edge equipment, and building trusted relationships with customers who rely on your skill and professionalism to keep their operations moving.
Entry - Level Shop Technician Pape Material Handling IncEntry - Level Shop TechnicianSeattle, WA$21.19–$29.66 / hourFull timeProgressive Vacation Plans, Sick Leave & Paid Holidays – Members receive 80 hours of vacation (First year is prorated for new hires based on start date), 1 hour of sick leave for every 30 hours worked, and 7 paid holidays each year. In this role, you will work on various makes and models of material handling equipment including troubleshooting, diagnosing problems, and making the necessary repairs in a timely and efficient manner.
Hospital Central Services Technician 2 University of WashingtonHospital Central Services Technician 2Seattle, WAPRIMARY JOB RESPONSIBILITIES** + Pick up and transport soiled instruments, case carts, basins, respiratory items, and patient equipment from all patient care areas to the decontamination area for reprocessing + Assemble and set up patient equipment such as IV pumps, vacuum regulators (wall suction), chest pumps, hyper/hypothermia units; test and make minor repairs and adjustments to equipment + Load and operate semi-automatic cart washer to clean case carts, utility carts, patient chairs, etc. **WORK SCHEDULE** + Full-time + Day, Evening, and Night Shifts Available **POSITION HIGHLIGHTS** Support Harborview's Surgical Services / Operating Rooms by decontaminating, processing, sterilizing, and assembling complex surgical instrument arrangements **DEPARTMENT DESCRIPTION** Harborview 's Central Processing Unit manages the entire workflow of sterile instruments in the medical center and our supported clinics.
Diesel Technician / Mechanic - Pacific, WA Freightliner NorthwestDiesel Technician / Mechanic - Pacific, WAPacific, Washington$20–$50 / hourFull timeHelping customers satisfy their transportation needs since 1986, Gordon Truck Centers, Inc. (GTC) is an expanded network of 19 dealerships doing business as Gordon Truck Centers, Freightliner Northwest, Western Star Northwest, TrailerCraft, Western Mountain Bus and Freightliner of Hawaii. With the help of a team and leadership you can rely on as well as training to build your skillset, we’ll coach and encourage you every step of the way in well equipped, safe facilities where you’re empowered to do what’s right - whether you’re performing routine maintenance or complete engine overhauls.
HVAC (Heating, Ventilation, & Air Conditioning) Refrigeration Technician (HVAC Refrigeration Mechan Port of SeattleHVAC (Heating, Ventilation, & Air Conditioning) Refrigeration Technician (HVAC Refrigeration MechanSeattle, WACity of Seattle Refrigeration Mechanic's License class A** - requires three (3) years of experience conducting refrigeration repair and installation, as an apprentice to, or as a journeyman refrigeration and/or air conditioning mechanic; or two (2) years of training in a recognized school of technology, combined with one (1) year of experience in the refrigeration trade; or two (2) years full-time experience in the refrigeration trade and graduation from a recognized trade school of refrigeration technology. **Who you are:** + **Experienced** - Two (2) years of experience in the operation and maintenance of HVACR systems; Or two (2) years of technical school HVACR coursework; Ora combination of education and/or training and/or experience which provides an equivalent background required to perform the work of the class, relative to the required licenses.
Lead AV Installation Technician Amplify PeopleLead AV Installation TechnicianRedmond, WA$32–$42 / hourThe right person can walk onto a job site with a punch list and complete it independently, pulling and terminating wire, cutting in speakers, building and dressing racks, mounting displays, and driving the installation to the point of programming without needing their work checked. Physical Demands: This role requires regular ladder work, access to attics and crawl spaces, lifting and maneuvering equipment, and extended periods of standing, kneeling, and working in tight or unfinished spaces.
Service Technician / Mechanic BIG O TIRESService Technician / MechanicBonny Lake, Washington$22–$30 / hourOur stores provide a welcoming environment for customers, and we create a caring and developmental workplace where employees can excel and advance according to their abilities. Big O Tires offers a wide range of diagnostic, repair and routine maintenance services, backed by one of the best national services warranties in the business.