Aerospace Drylube/10-85 Painter - 1st Shift Hytek FinishesAerospace Drylube/10-85 Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Paint Masker - 1st Shift Hytek FinishesAerospace Paint Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.
Aerospace Painter - 1st Shift Hytek FinishesAerospace Painter - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Shot Peen Assistant - 1st Shift Hytek FinishesAerospace Shot Peen Assistant - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Chrome Masker - 1st Shift Hytek FinishesAerospace Chrome Masker - 1st ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Aerospace Polish Operator - 1st or 2nd Shift Hytek FinishesAerospace Polish Operator - 1st or 2nd ShiftWoodmont Beach, WAFull timel learn a range of techniques and tools for polishing parts including the use of wheel lathes, Dynafiles, and various hand tools to achieve customer driven visual requirements, most often to achieve a grain finish appearance. *FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Part-Time Trainer/Instructor (Aircraft/Aviation/Aerospace Industry)- Onsite - Ev GP Strategies Government Solutions, Inc.Part-Time Trainer/Instructor (Aircraft/Aviation/Aerospace Industry)- Onsite - EvEverett, WAPart timeFor over 50 years, with a proven track record of supporting over 6,000 global organizations worldwide, we combine human expertise with AI-driven insights to deliver customized strategies that upskill talent, drive technology adoption, and optimize critical processes. Our Mission is meaningful and powerful: to deliver innovative people performance through off the shelf and custom learning, mission specialists, and technology solutions, building deep partnerships with customers to help them achieve measurable mission and company performance improvements.
Part-Time Aviation Instructor - Onsite - Everett, WA GP Strategies Government Solutions, Inc.Part-Time Aviation Instructor - Onsite - Everett, WAEverett, WAPart timeFor over 50 years, with a proven track record of supporting over 6,000 global organizations worldwide, we combine human expertise with AI-driven insights to deliver customized strategies that upskill talent, drive technology adoption, and optimize critical processes. Our Mission is meaningful and powerful: to deliver innovative people performance through off the shelf and custom learning, mission specialists, and technology solutions, building deep partnerships with customers to help them achieve measurable mission and company performance improvements.
Part-Time Aviation Instructor - Renton, WA GP Strategies Government Solutions, Inc.Part-Time Aviation Instructor - Renton, WARenton, WAPart timeFor over 50 years, with a proven track record of supporting over 6,000 global organizations worldwide, we combine human expertise with AI-driven insights to deliver customized strategies that upskill talent, drive technology adoption, and optimize critical processes. Our Mission is meaningful and powerful: to deliver innovative people performance through off the shelf and custom learning, mission specialists, and technology solutions, building deep partnerships with customers to help them achieve measurable mission and company performance improvements.
Part-Time Aviation Instructor - Onsite - Renton, WA GP Strategies Government Solutions, Inc.Part-Time Aviation Instructor - Onsite - Renton, WARenton, WAPart timeFor over 50 years, with a proven track record of supporting over 6,000 global organizations worldwide, we combine human expertise with AI-driven insights to deliver customized strategies that upskill talent, drive technology adoption, and optimize critical processes. Our Mission is meaningful and powerful: to deliver innovative people performance through off the shelf and custom learning, mission specialists, and technology solutions, building deep partnerships with customers to help them achieve measurable mission and company performance improvements.
Assembler 2nd Shift $1.25 per hour shift premium train on 1st shift Safran SAAssembler 2nd Shift $1.25 per hour shift premium train on 1st shiftMarysville, WA$17.13–$22.35 / hourCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD 17.13/hr - 22.35/hr" ITAR: ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Assembler 2nd Shift $1.25 per hour shift premium train on 1st shift SafranAssembler 2nd Shift $1.25 per hour shift premium train on 1st shiftMarysville, WA$17.13–$24.57 / hourReference number** 2026-182577 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Balancing **Job title** Assembler 2nd Shift $1.25 per hour shift premium train on 1st shift **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Summary of Duties: Assembler: • Assembles aircraft interior structures and/or parts, such as bins, galleys, lavatories, sidewalls, cargo liners, etc. and builds sub-assemblies for the completion of aircraft interior structures, and/or parts using engineering drawings, company and customer specifications. **Annual salary** USD $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes
Assembler 2nd Shift $1.25 per hour shift premium train on 1st shift - SCI SafranAssembler 2nd Shift $1.25 per hour shift premium train on 1st shift - SCIMarysville, WA$17.13–$22.35 / hourReference number** 2026-176879 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Balancing **Job title** Assembler 2nd Shift $1.25 per hour shift premium train on 1st shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Summary of Duties: Assembler: - Assembles aircraft interior structures and/or parts, such as bins, galleys, lavatories, sidewalls, cargo liners, etc. and builds sub-assemblies for the completion of aircraft interior structures, and/or parts using engineering drawings, company and customer specifications. **Annual salary** USD 17.13/hr - 22.35/hr" **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes
Aerospace Painter - 2nd Shift Hytek FinishesAerospace Painter - 2nd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Painter - 3rd Shift Hytek FinishesAerospace Painter - 3rd ShiftKent, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Aerospace Cadmium Assistant - 3rd Shift Hytek FinishesAerospace Cadmium Assistant - 3rd ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Zinc Nickel Assistant - 3rd Shift Hytek FinishesAerospace Zinc Nickel Assistant - 3rd ShiftWoodmont Beach, WAFull timeFollow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Aerospace Titanium-Cadmium Assistant - 2nd Shift Hytek FinishesAerospace Titanium-Cadmium Assistant - 2nd ShiftWoodmont Beach, WAFull timeFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.
Freezer Clerk 1st Shift Level 1 - SCI SafranFreezer Clerk 1st Shift Level 1 - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD $17.13/hr - $24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-181057 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Freezer Clerk 1st Shift Level 1 - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Freezer Clerk specifically works in the freezer locations, managing part flow and support of production.
Electrical Mechanic 3 1st Shift - SCI Safran SAElectrical Mechanic 3 1st Shift - SCIMarysville, WA$22.87–$35.94 / hourCompany: Safran Cabin Job field: Electrical and mechatronics Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: More than 3 years Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD $22.87 - $35.94 Hourly ITAR: ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Aerospace NDT Assistant - 1st Shift Hytek FinishesAerospace NDT Assistant - 1st ShiftKent, WA$21–$24 / hourEmployees in this position will learn how to perform tasks in support of the Level 1 and Level II Non-Destructive Testing Inspector(s) including loading, running, and unloading the ovens for stress bakes and vapor degreasing. * FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing.
Satellite Dynamic Test Technician II (1st Shift), Amazon Leo AmazonSatellite Dynamic Test Technician II (1st Shift), Amazon LeoKirkland, WACommunicate production progress and blockers to engineering and leadership - Operate a crane holding sensitive equipment with a payload up to 3000 lbs - Ability to work with various hand tools and calibrated equipment - Use computer software programs for running tests - Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environment Willing to work all shifts, overtime and weekends as needed. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.
NewAerospace Titanium Assistant - 1st Shift Hytek FinishesAerospace Titanium Assistant - 1st ShiftKent, WA$21–$25 / hourFAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Essential Mental/Physical Demands Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift ELDEC AerospaceRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WashingtonThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Repair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd Shift Crane Aerospace & ElectronicsRepair and Overhaul (R&O) Electronics Technician II-IV 1st and 2nd ShiftLynnwood, WA$32.30–$41.78 / hourThe R&O Electronics Technician is responsible for testing, troubleshooting, repairing, and modifying repair and overhaul (R&O) electronic components, electro-mechanical assemblies, parts, equipment, and systems by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. + Skills: Good oral expression and comprehension (communicate through speech so others will understand and listen to and understand information and ideas presented through speech); Good written expression and comprehension (communicate in English through writing so others will understand and read and understand information and ideas presented in English through writing).Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Production Supervisor - 1st Shift - SCM MV Safran SAProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: Associate Degree Required experience: More than 5 years Professional status: Supervisory staff Spoken language(s): English Fluent Salary range: USD 57,620 - 90,550 ITAR: ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Integration Technician (Starlink) - 1st Shift SpaceXIntegration Technician (Starlink) - 1st ShiftRedmond, WA$23–$29 / hourRESPONSIBILITIES: + Stage, set up, assemble, test, and install satellite flight hardware + Use various mechanical and precision calibrated tools including automated and manual torque wrenches + Hands on operations with both large and small mechanical assemblies + Perform work according to procedures, specifications, and test instructions + Ensure product quality and conformance to specifications + Ensure all production services are performed on time, safely and in a professional manner + Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment + Collaborate with production engineers to develop and document activities + Support troubleshooting of hardware issues in real-time and provide feedback to eliminate repeat issues BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 1+ year of experience working in electrical or mechanical test environment or performing electrical or mechanical installations PREFERRED SKILLS AND EXPERIENCE: + 3+ years of hands-on electro-mechanical assembly experience in the aerospace industry, aviation, military or other high-volume operating environment preferred + Skill in operating machinery and various tools requiring manual dexterity + Experience with forklifts, cranes and heavy equipment a plus + Ability to work effectively in a team environment + Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment + Excellent attention to detail and an insistence on permanently correcting errors + A demonstrated ability in reading/understanding technical drawings, manuals and reports + Airframe and Powerplant (A&P) schooling ADDITIONAL REQUIREMENTS: + Must be willing to work extended hours and weekends as needed + Estimated shift hours: 1st shift 5:00 AM to 3:30 PM + Up to 20% of travel may be required for this role + Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position + Must be able to lift up to 25lbs. ITAR REQUIREMENTS: + To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Kit Cut 1st Shift Safran SAKit Cut 1st ShiftMarysville, WA$17.13–$24.57 / hourCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD 17.13/hr - 24.57/hr ITAR: ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Cascade Tool Prep 1st shift Safran SACascade Tool Prep 1st shiftMarysville, WA$35,640–$51,100 / yearCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD $35,640.00 - $51,100.00 ITAR: ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Assembler 1st Shift - SCI Safran SAAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD $17.13 - $24.57 Hourly ITAR: ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Tool Prep 1st Shift - SCI Safran SATool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: $17.13 - $24.57 Hourly ITAR: ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Integration Technician Starlink - 1st Shift Space Exploration Technologies CorpIntegration Technician Starlink - 1st ShiftRedmond, WA$23–$29 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Print Shop Technician - 1st Shift - $20-hr - SCM MV Safran SAPrint Shop Technician - 1st Shift - $20-hr - SCM MVMarysville, WACompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD 41,600 ITAR: ITAR Controlled position. We trust our employees to bring bold ideas to build the future of aerospace together, contributing to our ranking by TIME as the leading Aerospace & Defense company on the 2023 Worlds Best Companies list (#59 on the full list).
Structures Mechanic 1st Shift Safran SAStructures Mechanic 1st ShiftMarysville, WA$20.79–$32.68 / hourCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Temporary Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: More than 3 years Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD $20.79 - $32.68 ITAR: ITAR Controlled position. Assembles aircraft parts using resins and epoxies and fasteners using engineering drawings, company and customer specifications.
Lay Up 1st Shift - SCI Safran SALay Up 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourCompany: Safran Cabin Job field: Manufacture / assembly and repair Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: First experience Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD 17.13/hr - 24.57/hr ITAR: ITAR Controlled position. Constructs complicated aircraft structure parts by laying-up resin infused carbon fiber in a sequence and process in an autoclave as described on engineering drawings and company specifications.
Electrical Mechanic 3 1st Shift - SCI SafranElectrical Mechanic 3 1st Shift - SCIMarysville, WA$22.87–$35.94 / hourAnnual salary** USD $22.87 - $35.94 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182622 **Job details** **Domain** Production **Job field / Job profile** Electrical mechatronics - Electrical and mechatronics machinery **Job title** Electrical Mechanic 3 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** - Use a variety of tools and equipment to assemble product according to required specifications and procedures.
Avionics Electronics Technician - 1st Shift (Onsite) RTX CorpAvionics Electronics Technician - 1st Shift (Onsite)Federal Way, WARegardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. Aligns and adjusts advanced electronic components on units being repaired to ensure proper functioning of electronic circuits, utilizing established calibration procedures.
Skillbridge - Avionics Electronics Technician - 1st Shift (Onsite) RTX CorporationSkillbridge - Avionics Electronics Technician - 1st Shift (Onsite)federal way, WA_Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings._ **WHAT WE OFFER:** SkillBridge Fellows are not eligible for any employee benefits, however they may be available upon conversion to full-time.? https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/subpart-C/section-120.62 **Security Clearance Type:** None/Not Required **Security Clearance Status:** Not Required **Are you seeking a pathway to an incredible post-military career in the Aerospace and Defense industry?** ?
Production Supervisor - 1st Shift - SCM MV SafranProduction Supervisor - 1st Shift - SCM MVMarysville, WA$57,620–$90,550 / yearAnnual salary** USD 57,620-90,550 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12806 State Avenue WA 98271 Marysville **Applicant criteria** **Minimum education level achieved** Associate Degree **Minimum experience level required** More than 3 years **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes Across all team members, we are looking for the following attributes: - Team oriented - Process focused - Open & honest communication - Quality minded - Ability to persevere and honor commitments - Recognizes success - Executes with urgency - Creates solutions - Customer focused in everything we do Job Requirements: Associate's degree or equivalent experience (+2 years).
Assembler 1st Shift - SCI SafranAssembler 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourReference number** 2026-182574 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Assembler 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Summary of Duties: Assembler: • Assembles aircraft interior structures and/or parts, such as bins, galleys, lavatories, sidewalls, cargo liners, etc. and builds sub-assemblies for the completion of aircraft interior structures, and/or parts using engineering drawings, company and customer specifications. **Annual salary** USD $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes
Tool Prep 1st Shift - SCI SafranTool Prep 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** $17.13 - $24.57 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182572 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Tool Prep 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Tool Prep will receive tools from the process and prepare them to go back into production.
Structures Mechanic Ceilings 1st Shift - SCI SafranStructures Mechanic Ceilings 1st Shift - SCIMarysville, WA$20.79–$32.68 / hourAnnual salary** USD $20.79 - $32.68 Hourly **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-182625 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Structures Mechanic Ceilings 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Assembles aircraft parts using resins and epoxies and fasteners using engineering drawings, company and customer specifications.
Kit Cut 1st Shift - SCI SafranKit Cut 1st Shift - SCIMarysville, WA$17.13–$24.57 / hourAnnual salary** USD 17.13/hr - 24.57/hr **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes **Reference number** 2026-176863 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** Kit Cut 1st Shift - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Summary: Use ply cutting machine and computer to cut prepreg for composite panels.
Cascade Layup (Kit Inspect) 1st shift - SCI SafranCascade Layup (Kit Inspect) 1st shift - SCIMarysville, WA$35,760–$56,190 / yearFinalizes the layup build of the Cascade by: Organizing mandrels into rows in sequential order per XRMY 13-530 and MSC636-1 Properly compacts rows per XRMY 13-530 and MSC636-1 Ensures strong backs are at correct height per XRMY 13-530 and MSC636-1 Performs raw material layup on the surface of strong backs and tool surface per XRMY 13-530 and MSC636-1 Performs inspection of the cascade build per XRMY 13-530 and MSC636-1 Closes the lid of the cascade component Uses the overhead crane to put the lid onto its corresponding LM Ensures that the lid is seated correctly per XRMY 13-530 and MSC636-1 Measures the gap between details of LM per XRMY 13-530 and MSC636-1 Safely handles various regulated materials used in the process. **Annual salary** USD 35,760 - 56,190 **Job location** **Job location** North America, United States, Washington **City (-ies)** 12810 State Ave Marysville, WA 98271 **Applicant criteria** **Minimum education level achieved** High School Diploma/GED Equivalent **Minimum experience level required** First experience **Additional Languages preferred** English (Fluent) **ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency** Yes
NewElectronics Assembler (1st Shift) Crane CoElectronics Assembler (1st Shift)Lynnwood, WA$22.26–$27.45 / hourAbilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in a moderate to high paced work environment in a high volume setting. Skills: Strong verbal and written communication; Proficiency in reading comprehension (understanding written sentences and paragraphs in work related documents) of the English language; Proficient in operating software tools (ie.
Aircraft Mechanic - Sheet Metal/Structures Aviation Technical ServicesAircraft Mechanic - Sheet Metal/StructuresEverett, WA$23.50–$37 / hourFull timeHealth: To give employees flexibility to select the coverage that best meets their family’s needs, ATS offers a choice of comprehensive medical/pharmacy plans, dental and vision plans, health and dependent care flexible spending accounts, and voluntary benefits including accident and critical illness. Tuition/License Assistance: ATS offers a generous tuition reimbursement program including Aviation Maintenance Technology (AMT) student loan repayment, Airframe/Powerplant (A&P) certification (coursework and/or testing), and business-related degrees.
Aviation Maintenance Technician - AOG - 92310 BoeingAviation Maintenance Technician - AOG - 92310Renton, WashingtonThe Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. Willing and capable of travelling both domestically and internationally with short notice and for extended periods, anywhere in the world and for potentially extended periods of time (must obtain and possess current passport).
Electrical Mechanic 3 2nd Shift $1.25 per hour shift Premium - SCI Safran SAElectrical Mechanic 3 2nd Shift $1.25 per hour shift Premium - SCIMarysville, WA$22.87–$35.94 / hourCompany: Safran Cabin Job field: Electrical and mechatronics Location: Marysville, Washington, United States Contract type: Permanent Contract duration: Full-time Required degree: High School Diploma/GED Equivalent Required experience: More than 3 years Professional status: Employees / Staff Spoken language(s): English Fluent Salary range: USD $22.87 - $35.94 Hourly ITAR: ITAR Controlled position. Safran Cabin designs, certifies, manufactures and supports innovative aircraft cabin interiors, equipment and systems, providing airlines and OEM Customers with distinctive aircraft branding, and their passengers with a safe, comfortable and enjoyable flying experience.
Starlink Aviation Integration Technician Space Exploration Technologies CorpStarlink Aviation Integration TechnicianWA$23–$29 / hourYou may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. COMPENSATION AND BENEFITS: Pay range: • Starlink Aviation Integration Technician/Level 1: $23.00 - $29.00/hour • Starlink Aviation Integration Technician/Level 2: $28.00 - $34.50/hour • Starlink Aviation Integration Technician/Level 3: $33.00 - $40.00/hour.
Production Coordinator Starlink Aviation Space Exploration Technologies CorpProduction Coordinator Starlink AviationWA$22–$25 / hourYou may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. Production Coordinators support all production leadership staff to ensure the on-time delivery of components and assemblies for Starlink Aviation, Starlink Ground Mobility, and other Starlink Enterprise applications.