1st Shift, Recycling Sorter, Wilbraham, MA Capstone Logistics LLC1st Shift, Recycling Sorter, Wilbraham, MAWilbraham, MAGeneral Labor, Sorter, Entry Level - We’re hiring General Laborers / Sorters to sort recyclables at a large recycling and processing plant in Wilbraham, MA. This position does not require a resume, a candidate's ability to follow directions and the results of the realistic job preview will determine if we consider moving forward in candidacy for a future or present full-time position.
Machine Operator, 1st shift Butler America AerospaceMachine Operator, 1st shiftWindsor, CT$22–$25 / hourFull timeSet-up and Operate Machines, such as Lathes, Cutters, Shears, Borers, Millers, Grinders, Presses, Drills, and auxiliary machines, to make metallic and plastic workpieces. * Position, adjust, and secure stock material or workpieces against stops, on arbors, or in chucks, fixtures, or automatic feeding mechanisms, manually or using hoists.
Water Pollution Control Operator 1, 40 Hour Work Week, Work Schedule TBD Dependent on Operating Needs: 1st Shift Sunday - Thursday OR 1st Shift Tuesday - Saturday; 1 Position University of ConnecticutWater Pollution Control Operator 1, 40 Hour Work Week, Work Schedule TBD Dependent on Operating Needs: 1st Shift Sunday - Thursday OR 1st Shift Tuesday - Saturday; 1 PositionStorrs, CT$68,180–$87,657 / yearNOTE: DEEP Regulations for Class I Wastewater Treatment Facility Operator Certification requires: (A) Satisfactory evidence of (i) at least one year of experience in the operation of a wastewater treatment facility of Class I or higher; (ii) a high school diploma or G.E.D. and (iii) successful completion of a basic wastewater treatment facility operation course, approved by the commissioner, equaling at least nine CEU's; and (B) pass the Class I examination. If applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, and to indicate the (in person and/or online) course(s) studies, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned.
Water Pollution Control Operator 2, 40 Hour Work Week, 1st Shift Tuesday - Saturday, 7:00 a.m. - 3:00 p.m. OR 1st Shift Sunday - Thursday, 7:00 a.m. - 3:00 p.m. (1 position) University of ConnecticutWater Pollution Control Operator 2, 40 Hour Work Week, 1st Shift Tuesday - Saturday, 7:00 a.m. - 3:00 p.m. OR 1st Shift Sunday - Thursday, 7:00 a.m. - 3:00 p.m. (1 position)Storrs, CT$75,026–$95,773 / yearNOTE: DEEP Regulations for Class II Wastewater Treatment Facility Operator Certification requires: (A) satisfactory evidence of (i) at least three years of experience in the operation of a wastewater treatment facility of Class I or higher; (ii) a high school diploma or G.E.D. and (iii) successful completion of higher education equivalent to at least 30 CEUs in a field determined by the commissioner to be related to the operation of a wastewater treatment facility, of which at least 18 CEUs are directly related to the operation of a wastewater treatment facility; and (B) pass the Class II examination. If applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, and to indicate the (in person and/or online) course(s) studies, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned.
NewProduction Line Worker (1st Shift Mon - Fri 5am - 1:30pm) Strategic MaterialsProduction Line Worker (1st Shift Mon - Fri 5am - 1:30pm)South Windsor, ConnecticutAs a Production Line Worker , your responsibilities will include but are not limited to: Sort and process materials on a production line (may require standing for extended periods). We’re looking for a Production Line Worker to join our team and help keep our operations running smoothly and safely.
Maintenance Supervisor 1 - HVACR (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position) University of ConnecticutMaintenance Supervisor 1 - HVACR (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position)Storrs, CT$74,028–$96,813 / yearIf applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, particularly in the HVACR trade, and to indicate the title(s) of the in person and/or online course(s) studied, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned. Position Department Search # Location Closes Maintenance Supervisor 1 - HVACR (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position) FO Mechanical and Plumbng Svcs (FO Trade Services) (FO Energy and Trade Services) 499656 UConn Storrs Jul 20 2026 University of Connecticut's Facilities Operations Department, has one job opening for a Maintenance Supervisor 1 - HVACR position at the Storrs Campus.
Machine Operator - 3rd shift paying 18.50 needs to train on 1st shift paying 17. Revere Staffing Partners Corp.Machine Operator - 3rd shift paying 18.50 needs to train on 1st shift paying 17.Agawam, MAWe're looking for a motivated individual to work 3rd shift with a pay rate of $18.50 per hour, with initial training on 1st shift at $17.00 per hour. Participate in training during the 1st shift to learn all necessary machine operations and safety procedures.
Laser Technician 1 - 1st Shift Hanwha Aerospace USALaser Technician 1 - 1st ShiftCTEBTEC has more than 45 years of experience executing precision high energy beam processes, including Electron Beam Welding, Laser Welding, Laser Cutting, Laser Drilling, EDM, Vacuum Heat Treating, and Waterjet Cutting, as well as traditional fabrication solutions for our clients' specific challenges. Measure, examine, and test completed units in order to detect defects and ensure conformance to specifications, using precision instruments such as micrometers.
CNC Milling Machinist 1st Shift Belcan LLCCNC Milling Machinist 1st ShiftCT$24–$37 / hourRole & Responsibilities: Perform complex set ups, edits and operate established and NPI jobs with minimal supervision ensuring parts conform to specifications and requirements. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed.
Assembler 1st Shift Belcan LLCAssembler 1st ShiftCT$24–$28 / hourYour Challenge: Perform skilled bench work to bring complex parts with tight tolerance to customer specifications by deburring, blending, sanding with hand tools and machinery, and adjusting parts, as needed, prior to inspection. Employment Benefits: In addition to annual compensation, a comprehensive employee benefits package is provided, which includes, but is not limited to the following: 2 weeks of vacation and available days of Floating Holiday annually in accordance with policy, prorated from date of employment.
NewPhlebotomist - 1st Shift GTT, LLCPhlebotomist - 1st ShiftWinsted, CTThis client is a leading provider of diagnostic laboratory and patient services , serving one in three adult Americans every year and supporting half of the physicians and hospitals across the United States, with laboratory operations extending internationally. The workforce includes phlebotomists, patient services representatives, laboratory scientists, logistics professionals, and technologists who contribute directly to healthcare outcomes that matter.
Phlebotomist Floater - 1st Shift GTTPhlebotomist Floater - 1st ShiftWethersfield, CTThis role draws quality blood samples, prepares specimens for laboratory testing, and ensures patient confidence through safe, accurate, and skillful procedures. Leveraging the world's largest clinical lab database, the organization offers insights to identify and treat diseases, promote healthy behaviors, and improve healthcare management.
In-Process Inspector Process Auditor | 1st Shift IDEX CorpIn-Process Inspector Process Auditor | 1st ShiftFarmington, CTWith interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses ( https://www.idexcorp.com/our-businesses/business-segments/ ) around the globe, chances are, we have something special for you. Over time, the role expands in scope to include process validation, control verification, and continuous improvement initiatives that directly impact product quality and operational excellence.
In-Process Inspector / Process Auditor | 1st Shift IDEXIn-Process Inspector / Process Auditor | 1st ShiftFarmington, ConnecticutWith interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses around the globe, chances are, we have something special for you. Over time, the role expands in scope to include process validation, control verification, and continuous improvement initiatives that directly impact product quality and operational excellence.
Receiving Inspector (1st Shift) BelcanReceiving Inspector (1st Shift)East Granby, CT$25–$35 / hourYour Challenge:* Incoming inspection of castings, forgings, raw material, and semi-finished/ finished aerospace components,* Sample inspect parts for conformance and review supplier certificates and test reports for conformance.* Inspection includes visual and dimensional using required gaging and measuring equipment* Interpret operation sheets and blueprints meet customer criteria for an acceptable part* Ensure that all parts being inspected meet criteria for an acceptable part* If a part is defective or needs re-work, Inspector must complete required paperwork associated with this task Education Requirements: High School Diploma, GED or equivalent is requiredEmployment Benefits: In addition to annual compensation, a comprehensive employee benefits package is provided, which includes, but is not limited to the following: * 2 weeks of vacation and available days of Floating Holiday annually in accordance with policy, prorated from date of employment. Your Expertise:* 2+ years of inspection experience in an aerospace environment* Previous experience performing dimensional and visual inspection in an aerospace environment* Ability to read, analyze, and interpret technical documents, blueprints, and customer specifications* Must have working knowledge of geometric tolerancing, gages, micrometers, borescopes and other measuring tools* A strong background in manufacturing and the ability to multitask in a fast-paced, dynamic environment is required* Previous experience performing incoming inspection in an aerospace environment (Highly desirable)* Experience reviewing supplier certification paperwork for conformance including, but not limited to, validating material properties, dimensional results, and compliance to customer specifications.*
Maintenance Supervisor 2 - Utilities, 1st Shift Monday - Friday, 7:00 a.m. - 3:00 p.m. (one position) University of ConnecticutMaintenance Supervisor 2 - Utilities, 1st Shift Monday - Friday, 7:00 a.m. - 3:00 p.m. (one position)Storrs, CT$79,134–$103,323 / yearIf applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, particularly in Plumbing and Heating, and to indicate the title(s) of the in person and/or online course(s) studied, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned. Experience serving in a leadership capacity that includes demonstrated experience in the supervision of employees serving in a wide range of skilled job classifications such as Student Labor Apprentices, Skilled Trades Apprentices and Quality Craft Workers (QCWs).
Maintenance Supervisor 2 - Plumbing (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position) University of ConnecticutMaintenance Supervisor 2 - Plumbing (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position)Storrs, CT$81,113–$105,907 / yearIf applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, particularly in Plumbing and Heating, and to indicate the title(s) of the in person and/or online course(s) studied, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned. Position Department Search # Location Closes Maintenance Supervisor 2 - Plumbing (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position) FO Mechanical and Plumbng Svcs (FO Trade Services) (FO Energy and Trade Services) 499655 UConn Storrs Jul 20 2026 University of Connecticut's Facilities Operations Department, has one job opening for a Maintenance Supervisor 2 - Plumbing position at the Storrs Campus.
Machine Operator - 3rd shift paying 18.50 needs to train on 1st shift paying 17. Revere Staffing PartnersMachine Operator - 3rd shift paying 18.50 needs to train on 1st shift paying 17.Agawam, MassachusettsWe're looking for a motivated individual to work 3rd shift with a pay rate of $18.50 per hour, with initial training on 1st shift at $17.00 per hour. Participate in training during the 1st shift to learn all necessary machine operations and safety procedures.
Medical Waste Non CDL Driver - 1st Shift 5AM to 3PM Daniels Sharpsmart IncMedical Waste Non CDL Driver - 1st Shift 5AM to 3PMEast Hartford, CTOur focus is delivering quality and safety-focused medical waste management services that reduce needlestick injuries, improve infection control and reduce the environmental footprint of our customers. As a service to our customers we dispose and treat medical waste at our treatment facilities across the U.S. If this sounds like the role for you, or somebody you know then we look forward to speaking with you!
Maintenance Mechanic - 1st Shift IDEXMaintenance Mechanic - 1st ShiftFarmington, CT$69,200–$103,800 / yearWith interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses (https://www.idexcorp.com/our-businesses/business-segments/) around the globe, chances are, we have something special for you. This hands‑on role supports preventive maintenance, equipment rebuilds, and continuous improvement initiatives while serving as a role model within the maintenance team and a key partner to production and support functions across the organization.
HVAC Technician- 1st Shift AramarkHVAC Technician- 1st ShiftWest Hartford, CT$30–$45 / hourThe ideal candidate will have hands-on experience with commercial HVAC systems, preventative maintenance programs, emergency repairs, and mechanical troubleshooting in institutional, commercial, healthcare, industrial, or campus environments. Installs, inspects, tests, operates, and repairs all refrigeration and related equipment for preserving food, making ice, cooling water, air conditioning, heating, and ventilation.
ELECTRICIAN- 1st Shift (7am-3pm) Starting pay range: $38.70/hr.- $42.68/hr. Agri-Mark, Inc.ELECTRICIAN- 1st Shift (7am-3pm) Starting pay range: $38.70/hr.- $42.68/hr.West Springfield, MA$38.70 / hourPart timeSchedule flexibility necessary, willingness to work overtime, weekends, holidays and rotate shift, as required by business needs. Apply knowledge of electronics principals in determining equipment malfunctions and apply skills in restoring equipment to operation.
Machine Operator (Floater) II 1st Shift (Assembly Department) StaffWorks, Inc.Machine Operator (Floater) II 1st Shift (Assembly Department)Farmington, CT$20–$22 / hourResponsibilities: Responsible for working in whatever area as needed, and utilizing a wide variety of skills to complete various job duties within the manufacturing department. This includes receiving packing instructions to customer specifications, insuring correct packing materials are being used and cartons are properly labeled.
Assembler, 1st Shift BelcanAssembler, 1st ShiftEast Granby, CT$24–$28 / hourSchedule and organize time and tasks effectively Your Challenge: * Perform skilled bench work to bring complex parts with tight tolerance to customer specifications by deburring, blending, sanding with hand tools and machinery, and adjusting parts, as needed, prior to inspection. * Use and interpret complicated prints, drawings and process sheets to perform a variety of layouts, as well as complete and sign work orders identifying the operations performed Education Requirements: High school diploma or equivalent required.
CNC Milling Machinist (1st Shift) BelcanCNC Milling Machinist (1st Shift)East Granby, CT$24–$37 / hourJob Title: CNC Milling Machinist (1st Shift) Locations: East Granby, CT (CT South) Pay: $24 - $37 (DoE) - Full Benefits Package Provided Zip Code: 06026 Start Date: ASAP Schedule: 1st Shift: 7:00am - 3:30pm, Mon-Fri Type: Full-Time/Permanent Position Position Details: 1st shift (7:00am - 3:30pm) Experience & Skill Requirements: - 3 to 5 years of experience machining in an aerospace environment - 3+ years of experience setting up and operating CNC Devlieg Milling Machines - Needs to be familiar with Fanuc controls; willing to cross train on various operations/equipment - Strong mathematical skills and knowledge of GD&T - Familiar with Statistical Process Control (SPC) - Willing to learn basic CNC Programming Role & Responsibilities: - Perform complex set ups, edits and operate established and NPI jobs with minimal supervision ensuring parts conform to specifications and requirements. Person' (which includes U.S. citizens, U.S. nationals, U.S. lawful permanent residents, and those granted U.S. asylum or refugee status) Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises.
Machine Operator 1st Shift Heat Treat Dept. StaffWorks, Inc.Machine Operator 1st Shift Heat Treat Dept.Farmington, CT$20.50 / hourGrowing business, state of the art facility, clean environment, STRONG PAY! Responsibilities: Responsible for operating machines in the heat treat department.
Warehouse Porter/Custodian - 1st Shift C&S Wholesale GrocersWarehouse Porter/Custodian - 1st ShiftWindsor Locks, ConnecticutFounded in 1918 as a supplier to independent grocery stores, C&S now services customers of all sizes, supplying more than 7,500 independent supermarkets, chain stores, military bases and institutions with over 100,000 different products. Our focus is simple but meaningful, from our distribution centers to our offices every employee of C&S and their family of companies works to help feed local families, neighbors and communities.
Phlebotomy - Phlebotomist I - 1st Shift TalentBurst, Inc.Phlebotomy - Phlebotomist I - 1st ShiftWinsted, CT$17–$21 / hourPhlebotomist, Phlebotomy, Phlebotomist Technician, Phlebotomy Technician, Mobile Phlebotomist, Medical Assistant, Technician, Certified Phlebotomy Technician. Backed by precision, transparency, and results, we connect top talent with leading organizations through trusted partnerships.
Maintenance Technician I - 1st Shift Pelican Products IncMaintenance Technician I - 1st ShiftMAWhat Youll Do: As a Maintenance Technician I, youll help keep our production equipment and facility operating at peak performance by performing preventive maintenance, troubleshooting issues, and completing repairs that minimize downtime and support manufacturing success. With a global presence that includes 11 offices, 4 manufacturing facilities, and 4 custom case centers, we create high-performance protective solutions that ensure our customers can focus on what matters most.
Heat Treat Racker- 1st Shift Steel Partners Holdings LPHeat Treat Racker- 1st ShiftAgawam, MAThe FastenMaster Division manufactures and markets innovative, premium-quality wood-to-wood fasteners that are engineered to enable professional contractors to complete building projects safer, faster, and easier. Heat Treat Rackers produce world-class fasteners for OMG using safe machine operating techniques and effective lean manufacturing principles.
General Maintainer - 1st Shift East Hartford Public SchoolsGeneral Maintainer - 1st ShiftEast Hartford, CT$27.36–$33.94 / hourIncluding but not limited to: carpentry, flooring, lock repairs, landscaping and landscaping construction, sheetrock repair, painting, hardware repair/replacement, material handling, and ceiling grid modifications. Performs a variety of daily and routine maintenance, repair, and construction activities in the East Hartford Public Schools' building portfolio.
ELECTRICIAN- 1st Shift (7am-3pm) Starting pay range: $37.57/hr.- $39.49/hr. Cabot Creamery Cooperative IncELECTRICIAN- 1st Shift (7am-3pm) Starting pay range: $37.57/hr.- $39.49/hr.West Springfield, MA$37.57–$39.49 / hourSchedule flexibility necessary, willingness to work overtime, weekends, holidays and rotate shift, as required by business needs. Apply knowledge of electronics principals in determining equipment malfunctions and apply skills in restoring equipment to operation.
Quality Assurance - QC Inspector 1st shift Chromalloy Gas Turbine LLCQuality Assurance - QC Inspector 1st shiftWindsor, CTKnow how to read and use calibrated tooling and equipment such as but not limited to vernier calipers, height gages, pi-tapes, plug gages, dial calipers, dial indicators, protractor, radius gages, hardness tester, dial bore gage, thickness gage, omni gages, go/no go gages, and micrometers. Ensure all inspections are properly performed and recorded, and all records are properly executed before final approval for return to service of components maintained or altered by CCS.
1st Shift Warehouse Picker Revere Staffing Partners Corp.1st Shift Warehouse PickerPalmer, MAThis position is responsible for accurately picking customer orders using paper pick sheets, preparing orders for shipment, and supporting daily warehouse operations. Pick customer orders accurately using paper pick tickets and order sheets.
Press Set Up Technician - 1st Shift IDEXPress Set Up Technician - 1st ShiftFarmington, ConnecticutWhen you join Mott, a leader in the industries we serve, you’ll join an entrepreneurial, employee-owned and fast-paced team and play a key role in our company’s double-digit growth. Running and monitoring of 3 Ton presses; in process inspection and adjustment, tray loading, furnace operation & monitoring powder levels.
Mechanical Technician - Electrical License Required, 1st Shift HP Hood LLCMechanical Technician - Electrical License Required, 1st ShiftAgawam, MA$40.74–$42.70 / hourOur portfolio of national and super-regional brands and licensed products includes Hood, Heluva Good, Lactaid, Blue Diamond Almond Breeze, Planet Oat and more. Our culture is built on value commitments to innovation, quality, results, integrity, community, people, and collaboration that fosters a strong employee engagement, teamwork, safety and wellness.
NewProcess Operator 1st Shift Dryer Operation Agri-Mark, Inc.Process Operator 1st Shift Dryer OperationWest Springfield, MA$29.29 / hourPart timeOur dairy cooperative is seeking a regular, full-time Machine Operator for our dryer operation (includes dryer, evaporator and RO) First shift (7am-3pm) who will provide for proper pasteurization of products following state and federal regulations. More than 100 years of: Farmers, Family, Mission, Purpose, Sustainability, Respect, Integrity, Work Ethic, Teamwork, Pride in Award Winning Products and Agriculture!
QA Inspector - 1st shift (Aerospace) Applied Aerospace & DefenseQA Inspector - 1st shift (Aerospace)Newington, ConnecticutWork from applicable written inspection procedures, drawings, and other pertinent instructions to plan and perform dimensional and visual inspection on parts, tools, gages, and other equipment, accepting material or referring for rework or quality review based on findings. Perform routine servicing throughout assigned area following specified procedures, and written instructions, such as operators’ checklist, for upkeep and to assure equipment operates properly.
NewCNC Machinist - Lathe - Level II/III - 1st or 2nd Shift HORST ENGINEERING & MANUFACTURING COCNC Machinist - Lathe - Level II/III - 1st or 2nd ShiftEast Hartford, CT$25–$36 / hourPerforms visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department. Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.
Production Supervisor Cortex 1st Shift Steel Partners Holdings LPProduction Supervisor Cortex 1st ShiftAgawam, MAThe FastenMaster Division manufactures and markets innovative, premium quality wood-to-wood fasteners that are engineered to enable professional contractors to complete building projects safer, faster, and easier. Effectively manage shift workers, including hiring, training, employee development, performance reviews, addressing disciplinary issues, and resolving employee performance issues.
1st Shift Direct Care Mental Health Association - Western MA1st Shift Direct CareChicopee, MAOur team helps participants overcome physical, emotional, and cognitive challenges, build skills, and gain independence through personalized care, meaningful daily routines, and supportive homes in welcoming neighborhoods. With 24/7 support, nursing, clinical, and therapeutic services, we help participants reconnect with their communities, regain confidence, and live life to the fullest.
2nd & 1st Shift Direct Care Mental Health Association - Western MA2nd & 1st Shift Direct CareSpringfield, MAWith over 60 years of experience, MHA helps individuals transition from institutional settings into homes where they can grow, make choices, and fully participate in community life. The Integration & Community Living (ICL) program supports individuals with developmental disabilities and brain injuries in living independently and meaningfully in the community.
1st Shift Direct Care (TEMP) Mental Health Association - Western MA1st Shift Direct Care (TEMP)Springfield, MAWith over 60 years of experience, MHA helps individuals transition from institutional settings into homes where they can grow, make choices, and fully participate in community life. The Integration & Community Living (ICL) program supports individuals with developmental disabilities and brain injuries in living independently and meaningfully in the community.
3rd & 1st Shift Direct Care Mental Health Association - Western MA3rd & 1st Shift Direct CareWestfield, MAOur team helps participants overcome physical, emotional, and cognitive challenges, build skills, and gain independence through personalized care, meaningful daily routines, and supportive homes in welcoming neighborhoods. With 24/7 support, nursing, clinical, and therapeutic services, we help participants reconnect with their communities, regain confidence, and live life to the fullest.
Fan Exit/Ogv - Production Operator 1st shift Chromalloy Gas Turbine LLCFan Exit/Ogv - Production Operator 1st shiftWindsor, CTEquipment used may include hand knife, automated power or hand cutters, injection mold presses, cranes or other lifting devices, oven operations or shop equipment such as drills, manual mills, etc. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations.
NewMachinist Manual - 1st Shift IDEX CorpMachinist Manual - 1st ShiftFarmington, CT$42,500–$63,700 / yearWith interesting opportunities in engineering, marketing, sales, supply chain, operations, HR, finance, and more across more than 40 diverse businesses ( https://www.idexcorp.com/our-businesses/business-segments/ ) around the globe, chances are, we have something special for you. Mott Corporation, part of the IDEX family of companies, designs and manufactures mission‑critical precision components used in demanding industrial, aerospace, defense, and high‑purity applications.
Manual VTL Operator/Machinist 1st Shift Chromalloy Gas Turbine LLCManual VTL Operator/Machinist 1st ShiftWindsor, CTDuties: Operate horizontal and manual vertical lathes, milling and grinding machines, VTLs, Jig Bores, Bridgeports, rubber grinding, Prototrack, drill presses and other special shop equipment for repair of parts. We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines.
Composite Repair - Production Operator 1st shift Chromalloy Gas Turbine LLCComposite Repair - Production Operator 1st shiftWindsor, CTEquipment used may include hand knife, automated power or hand cutters, injection mold presses, cranes or other lifting devices, oven operations or shop equipment such as drills, manual mills, etc. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations.
Aerospace Painter 1st shift Chromalloy Gas Turbine LLCAerospace Painter 1st shiftWindsor, CTChromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. Operator prepares necessary quality documents and confirms quality of own work using inspection tools in accordance with product specifications, blueprints, drawings, and work instructions.
Machinist 1st shift Chromalloy Gas Turbine LLCMachinist 1st shiftWindsor, CTOperate horizontal and manual vertical lathes, milling and grinding machines, VTLs, Jig Bores, Bridgeports, rubber grinding, Prototrack drill presses, and other special shop equipment for repair of parts. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations.