335 Results for

3rd Shift Production Jobs in Bothell, WA

Jobs

Kent, WA9 days ago

Recommends to plant management procedures, systems, equipment and machinery alterations to reduce costs, resolve problems, ensure product quality, reduce scrap and improve production efficiency. Sight – hand and eye coordination, depth perception needed to operate, adjust, and quantify chemicals and equipment, vision sufficient to inspect work areas and building for issues and operate computers.

Kent, WA26 days ago

Full-time
Employee

This position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in our facility. This position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in our facility.

New!

Kent, WAToday

As the largest wire manufacturer in the Western United States, our impressive range of products are used in a wide variety of fields, including agriculture, construction, transportation, communications, and industrial applications. Our belief in our people and their capabilities drives our decentralized structure, which fosters entrepreneurship — a key driver of our long-term growth.

Everett, WA30+ days ago

Full-time
Employee

USD - United States - US. DELIVERY_ACCOUNT_OPERATIONS.

Seattle, WA27 days ago

Full-time
Employee

USD - United States - US . Annual Base Salary Minimum .

New!

Seattle, WA2 days ago

$84,000–$86,000

We strive to create a culture where you can: Bring your authentic self to work Grow and thrive, both personally and professionally Make a difference with our clients, in our communities, and with the millions of people we support When you join Conduent, you are engaged in creating the future - both our company’s and your own. Through our dedicated associates, Conduent delivers mission-critical services and solutions on behalf of Fortune 100 companies and over 500 governments - creating exceptional outcomes for our clients and the millions of people who count on them.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Follow shop traveler, technique card, customer Purchase Orders, and instructions from experienced Maskers, Painters, and Department Leads and Coordinators.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Your pay will be based on multiple factors, including and not limited to your relevant experience level, and skillset while balancing internal equity relative to other employees.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial pre-employment drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

Woodmont Beach, WA26 days ago

Full-time
Employee

Follow technique card, customer Purchase Orders, and instructions from experienced Operators and Department Leads; legibly sign off on work once completed and Operator Self Verification inspection has occurred. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Kent, WA26 days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

Full-time
Employee

A Production Supervisor will be expected to perform a variety of functions which include but are not limited to managing and reporting on daily/weekly/monthly/quarterly Flex targets, tracking and planning their department's staffing needs, communicating and disseminating production targets and corporate policies from the facility's Management team down to their Hourly workforce, identifying, investigating, and resolving production and personnel issues within a fast paced, diverse work force. Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys.

Woodmont Beach, WA30 days ago

Full-time
Employee

Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. The Flight test Manufacturing Engineer is an assembly and installation engineer within Boeing Test and Evaluation (BT&E) that supports installation planning by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and supports during the build/installation.

Kent, WA27 days ago

$63,000–$85,000 Per Year

This position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in our facility. We’re looking for a hands-on, driven Operations Leader to supervise 3rd shift production and champion continuous improvement in a fast-paced environment.

Mill Creek, WA23 days ago

Full-time
Employee

Execute the day-to-day production of the Company's consumables to meet customer demand* Collaborate with manufacturing engineers to identify, troubleshoot, and resolve system or process excursions* Perform complex, mechanical assembly and quality inspection of products according to established specifications* Ensure the on-time delivery of high value, time-sensitive material to both vendors and customers* Maintain a clean, safe, and orderly work area* Other duties as assigned. or B.S. degree in STEM discipline* 2-10 years of experience working in a high-tech manufacturing setting either in a technician or production control capacity* Experience operating within Enterprise Resource Planning (ERP) and Manufacturing Execution Systems (MES)* Ability to run predefined recipes on CVD chambers, liquid handles, ovens, and imaging systems.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Preferred Qualifications: Hands on experience with relevant aerospace hardware manufacturing processes (i.e. castings, forgings, additively manufactured components, welding, machining, cleaning, non-destructive testing methods, tight tolerance assembly, leak testing, final acceptance testing of integrated hardware).

Seattle, WA30+ days ago

Full-time
Employee

Renton, WA10 days ago

Full-time
Employee

seeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

Woodinville, WA30+ days ago

$29.64–$29.65 Per Hour
Full-time
Employee

Manufacturing Production Workers focus on setting up, operating, maintaining, and troubleshooting manufacturing production (i.e., machining, processing, assembly, or packaging) equipment including Moving, packing, and sorting raw materials or finished goods. Load & Unload racks of parts, mask and unmask parts, touchup/rework, process rejects, inspect parts coming down lines, operates a hoist where necessary.

Kent, WA30+ days ago

$77,968–$130,228 Per Year
Full-time
Employee

Hexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Hands on experience in hardware manufacturing (i.e. tight tolerance assembly, leak testing, final acceptance testing of integrated hardware, and castings, forgings, additively manufactured components, welding, machining, cleaning, non-destructive testing methods, Manufacturing Execution Systems/Software).

Renton, WA30+ days ago

Full-time
Employee

Experience in Manufacturing Engineering Planning systems such as Product Data Manager (PDM), Computer Aided Process Planning (CAPP), Reference Engineering Data Automated Retrieval System (REDARS), and Wire Integration Retrieval System (WIRS). This role will require collaboration with a cross-functional electrical team, which includes Manufacturing Engineers, Design Engineers, and Shop Investigators, tasked with investigating and resolving emergent factory producibility issues.

Bellevue, WA30+ days ago

Full-time
Employee

Provide Support to production lines by troubleshooting failures and other issues and making necessary repairs to production and facility equipment to maximize efficiencies. Install new equipment as necessary and provide technical expertise to train and support production with a continued desire for lean supply chain process initiatives and improvement .

Arlington, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.

Woodmont Beach, WA30+ days ago

Full-time
Employee

The role is responsible for managing the direction of the Production team across all shifts and the full breadth of the Value Stream utilizing support from Production Leads and shift Production Supervisors. Is skilled in monitoring and assessing the performance of self, other individuals, and teams to make improvements and take corrective action, creating a track record of successful leadership.

Seattle, WA30+ days ago

Full-time
Employee

Manufacturing Engineers are owners of the build plan and ensure compliance to design configuration, build plan, and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. Required SkillS: * Bachelor, Master or Doctorate of Science degree required from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry is required.

Redmond, WA30+ days ago

Full-time
Employee

We design and manufacture advanced specialty vehicles-including fire, ambulance, and recreational vehicles-alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry. Through our global dealer, parts and service network and true value-creating digital solutions, we deliver best-in-class lifecycle support, helping customers maximize return on investment.

Mill Creek, WA13 days ago

$87,000–$115,570 Per Year
Full-time
Employee

Physical Demands: Physical exertion may be required to perform occupational tasks (sitting up to 2 or more hours at a time, standing for up to 8 or more hours a day, walking, bending, kneeling, laying, twisting, carrying, reaching, stretching, pushing, pulling, and lifting up to 50 lbs. Physical exertion may be required to perform occupational tasks (sitting up to 2 or more hours at a time, standing for up to 8 or more hours a day, walking, bending, kneeling, laying, twisting, carrying, reaching, stretching, pushing, pulling, and lifting up to 50 lbs.

Renton, WA24 days ago

Full-time
Employee

With complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.

Redmond, WA30+ days ago

Full-time
Employee

Everett, WA30+ days ago

Full-time
Employee

With delivery centers and offices across North America and India, we take pride in building long-term relationships and delivering excellence through innovation, collaboration, and integrity. BCforward is a leading global IT consulting and workforce solutions firm providing services and support to Fortune 500 and government clients.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Renton, WA30+ days ago

$100–$135 Per Hour
Full-time
Employee

Capable of designing or defining the requirements for the development of equipment, robotics, Lay-up molds, Vacuum Holding Fixtures, Shop Aids, Positioning fixtures, Go-No-Go inspection tools required for the manufacturing of new products. Essential Functions: Essential functions, including how an individual is to perform them and the frequency with which the tasks are performed; the tasks must be part of the job function and truly necessary or required to perform the job.

Redmond, WA30+ days ago

Full-time
Employee

The Senior Manufacturing Engineer - Design for Automation (DFA) is responsible for enabling automationready, scalable, and repeatable manufacturing solutions for Genie products by leading DFA efforts upstream through New Product Development (NPD) and supporting robust execution across Manufacturing Engineering and Manufacturing Technical Services (MTS). Genie Industries, a business segment of the Terex Corporation, is headquartered in Bothell, WA with branch offices worldwide; we manufacture material lifts, aerial work platforms, trailer-mounted booms and light towers, telehandlers, scissor lifts and self-propelled telescopic and articulating booms.

Mukilteo, WA30+ days ago

Full-time
Employee

We create for our global customers engineered components and sub-systems that deliver extreme precision and performance for a range of mission-critical applications-from minimally invasive surgery to robotics to 3D metal printing. This position plays a key role in maintaining version control, tracking approvals, and ensuring access to accurate information across teams such as engineering, quality, manufacturing, or compliance.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Redmond, WA30+ days ago

$20.52–$34.20 Per Hour
Intern
Full-time

With our wide range of technologies, including in the clean tech space, we help our customers solve their most complex engineering challenges by living our purpose: enabling engineering breakthroughs that lead to a better tomorrow. Our Purpose - Enabling Engineering Breakthroughs that Lead to a Better Tomorrow - comes to life through our people-first culture where teamwork drives performance, inclusion fuels innovation and growth is encouraged.

Woodmont Beach, WA13 days ago

$83,250–$138,550 Per Year
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.

Kent, WA30+ days ago

Full-time
Employee

Woodmont Beach, WA30+ days ago

$83,250–$138,550 Per Year
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Leads capital equipment and process improvement projects end-to-end-managing scope, schedule/milestones, budget/CapEx tracking, and cross-functional coordination through installation, start-up, and closure while escalating risks/issues as needed.

Bellevue, WA15 days ago

$138,685–$208,027 Per Year
Full-time
Employee

TerraPower is seeking to hire highly motivated and forward-thinking professionals who are interested in focusing on advanced nuclear reactor research and development and influencing change within the nuclear power landscape and bringing forward the critical production of medical isotopes. As a result, the companys activities in the fields of nuclear energy and related sciences are yielding significant innovations in the safety and economics of nuclear power, hybrid energy and medical applications all for significant human health benefits.

Renton, WA27 days ago

Full-time
Employee

This responsibility encompasses the entire R&D manufacturing value chain, including, but not limited to, Design for Manufacturability work, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and documentation associated with the processes that the Manufacturing Engineer oversees. Pay ranges may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets.

Kent, WA30+ days ago

$77,968–$117,324 Per Year
Full-time
Employee

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.

New!

Marysville, WA6 days ago

$35,760–$56,190 Per Year

Reference number** 2026-179895 **Job details** **Domain** Production **Job field / Job profile** Manufacture assembly and repair - Assembly **Job title** CNC Operator 3rd Shift $2.00 hour shift premium - SCI **Employment type** Permanent **Professional category** Employees / Staff **Part time / Full time** Full-time **Job description** Job Title: CNC Machine Operator - All Levels Effective Date: 01/01/2019 Department: Production/Operations FLSA: Non-Exempt/Hourly Discipline: MACH Job Summary: This role includes the duties of the following position: CNC Machine Operator. Operates computer numerical controlled (CNC) machines such as, but not limited to; milling machines, lathes, turning centers and horizontal mills used for the construction of aircraft interior structural and non structural parts, such as floor fittings, aluminum trims, counter tops and other various aluminum, stainless steel and phenolic parts used in aircraft interiors using engineering drawings, company and customer specifications.

Redmond, WA30+ days ago

$110,000–$120,000 Per Year
Full-time
Employee

SUMMARY: The Manufacturing Engineer will work closely with all functional groups to develop robust, cost-effective manufacturing and assembly processes and related documentation for use throughout the manufacturing facility. The Manufacturing Engineer is responsible for complete process ownership and support of the assigned manufacturing or assembly area, interfacing with other functional groups as required, and resolving issues with effective corrective actions.

Redmond, WA30+ days ago

Full-time
Employee

We design and manufacture advanced specialty vehicles-including fire, ambulance, and recreational vehicles-alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry. Develop and evaluate Engineering Change Request (ECR)/Engineering Change Notice (ECN)/Special Manufacturing Instruction (SMI) proposals/processes for production, including design improvements, and prototyping.

Woodmont Beach, WA30+ days ago

Full-time
Employee

Follow technique card, customer Purchase Orders and drawings, and instructions from experienced Anodize Operators to prepare and process parts; prepare, understand, and document technique cards. * FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing.

Woodmont Beach, WA30+ days ago

Full-time
Employee

FAA DOT Drug & Alcohol Testing Program requires an initial drug test including a screen for THC, subject to quarterly Drug & BAT testing. Ability to lift occasionally: (floor to knee) 114 lbs., (waist to waist) 63 lbs., (floor, knee, to waist) 75 lbs., (waist to shoulder) 30 lbs.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to 3rd Shift Production job opportunities. Plus, receive relevant job recommendations in your inbox.

3rd Shift Production Jobs in Bothell, WA

Production Supervisor - Manufacturing Various Shifts Davis Wire

Production Supervisor, 3rd Shift - Aerospace Manufacturing Leadership Opportunit Hytek Finishes

Machine Operator 2nd Shift - Davis Wire Corporation - Kent, WA Davis Wire

Print Production Associate (3rd shift) - Everett, WA Xerox Corporation

Print Production Associate (3rd shift) - Seattle, WA Xerox Corporation

Senior Supervisor, Delivery Conduent Learning Services, Inc.

Aerospace Paint Masker - 3rd Shift Hytek Finishes

Aerospace Zinc Nickel Assistant - 3rd Shift Hytek Finishes

Aerospace Abrasive Blast Operator - 3rd Shift Hytek Finishes

Aerospace Cadmium Assistant - 3rd Shift Hytek Finishes

Aerospace Painter - 3rd Shift Hytek Finishes

Production Supervisor - Graveyard Shift Primus International LLC

Manufacturing Engineer 3 Spectraforce Technologies Inc.

Production Supervisor, 3rd Shift - Aerospace Manufacturing Leadership Opportunity Hytek Finishes

Manufacturing Production Technician Bruker Nano Inc

New Glenn B-shift Manufacturing Engineer Blue Origin LLC

New Glenn C-shift Manufacturing Engineer Blue Origin LLC

Aerospace Manufacturing Production Worker - All Shifts Sekisui Aerospace

Production Associate, 1st Shift PPG Industries, Inc.

Manufacturing Engineer 3 Hexcel Corporation

Manufacturing Engineer - Rocket Engines Valves (Weekend Shift) Blue Origin LLC

Manufacturing Planner 3 Spectraforce Technologies Inc.

Production Maintenance Technician (Union) Swire Pacific Holdings Inc.

Manufacturing Shift Leader - Castings Blue Origin LLC

Production Value Stream Manager - Aerospace Manufacturing Leadership Opportunity Hytek Finishes

Manufacturing Engineer 2 Spectraforce Technologies Inc.

Manufacturing Engineer II Terex Corporation

Service Production Supervisor Rivian Automotive, LLC

Advanced Composites Manufacturing Lead - 1st Shift Sekisui Aerospace

Manufacturing Engineer I Terex Corporation

Aerospace Production Certification Assessor Bucher & Christian Consulting, Inc. dba BCforward (BCF)

Machine Tool Manufacturing Engineer III Blue Origin LLC

Manufacturing Engineer II Sekisui Aerospace

Manufacturing Engineer III/Sr. - Design for Automation Terex Corporation

Project and Documentation Coordinator, R&D Novanta, Inc.

Technician - Additive Manufacturing LVL I | C/D Shift Blue Origin LLC

Technician - Additive Manufacturing LVL I | C Shift Blue Origin LLC

Manufacturing Engineer Intern (Summer 2026) Parker Hannifin Corporation

Manufacturing Engineer 2 (Aerospace) Parker Hannifin Corporation

Aerospace Cadmium Assistant - 2nd Shift Hytek Finishes

Experienced Manufacturing Engineer (CapEx Focus) Parker Hannifin Corporation

Senior Mechanical Manufacturing Engineer TerraPower

Manufacturing Engineer III - Product Development Sekisui Aerospace

Manufacturing Engineer II Hexcel Corporation

Sr. Propulsion Engineer - Valves BE3U Blue Origin LLC

CNC Operator 3rd Shift $2.00 hour shift premium - SCI Safran

Manufacturing Engineer B.E. Meyers & Co, LLC

Manufacturing Engineer I/II - Weld Engineer Terex Corporation

Aerospace Anodize Operator - 1st Shift Hytek Finishes

Aerospace Packager - 2nd Shift Hytek Finishes

Resume Resources